change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 0 insertions, 1237 deletions

diff --git a/target/linux/rb532/files/arch/mips/rb500/Makefile b/target/linux/rb532/files/arch/mips/rb500/Makefile
deleted file mode 100644
index d3ae3d912..000000000
--- a/target/linux/rb532/files/arch/mips/rb500/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the RB500 board specific parts of the kernel
-#
-
-obj-y	 += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
diff --git a/target/linux/rb532/files/arch/mips/rb500/devices.c b/target/linux/rb532/files/arch/mips/rb500/devices.c
deleted file mode 100644
index 6372737de..000000000
--- a/target/linux/rb532/files/arch/mips/rb500/devices.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- *  RouterBoard 500 Platform devices
- *
- *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *  GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/dma.h>
-#include <asm/rc32434/dma_v.h>
-#include <asm/rc32434/eth.h>
-#include <asm/rc32434/rb.h>
-
-#define ETH0_DMA_RX_IRQ   	GROUP1_IRQ_BASE + 0
-#define ETH0_DMA_TX_IRQ   	GROUP1_IRQ_BASE + 1
-#define ETH0_RX_OVR_IRQ   	GROUP3_IRQ_BASE + 9
-#define ETH0_TX_UND_IRQ   	GROUP3_IRQ_BASE + 10
-
-#define ETH0_RX_DMA_ADDR  (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET)
-#define ETH0_TX_DMA_ADDR  (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET)
-
-/* NAND definitions */
-#define MEM32(x) *((volatile unsigned *) (x))
-
-#define GPIO_RDY (1 << 0x08)
-#define GPIO_WPX (1 << 0x09)
-#define GPIO_ALE (1 << 0x0a)
-#define GPIO_CLE (1 << 0x0b)
-
-extern char* board_type;
-
-static struct resource korina_dev0_res[] = {
-	{
-		.name = "korina_regs",
-		.start = ETH0_PhysicalAddress,
-		.end = ETH0_PhysicalAddress + sizeof(ETH_t),
-		.flags = IORESOURCE_MEM,
-	 }, {
-		.name = "korina_rx",
-		.start = ETH0_DMA_RX_IRQ,
-		.end = ETH0_DMA_RX_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_tx",
-		.start = ETH0_DMA_TX_IRQ,
-		.end = ETH0_DMA_TX_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_ovr",
-		.start = ETH0_RX_OVR_IRQ,
-		.end = ETH0_RX_OVR_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_und",
-		.start = ETH0_TX_UND_IRQ,
-		.end = ETH0_TX_UND_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_dma_rx",
-		.start = ETH0_RX_DMA_ADDR,
-		.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
-		.flags = IORESOURCE_MEM,
-	 }, {
-		.name = "korina_dma_tx",
-		.start = ETH0_TX_DMA_ADDR,
-		.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
-		.flags = IORESOURCE_MEM,
-	 }
-};
-
-static struct korina_device korina_dev0_data = {
-	.name = "korina0",
-	.mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
-};
-
-static struct platform_device korina_dev0 = {
-	.id = 0,
-	.name = "korina",
-	.dev.platform_data = &korina_dev0_data,
-	.resource = korina_dev0_res,
-	.num_resources = ARRAY_SIZE(korina_dev0_res),
-};
-
-#define CF_GPIO_NUM 13
-
-static struct resource cf_slot0_res[] = {
-	{
-		.name = "cf_membase",
-		.flags = IORESOURCE_MEM
-	}, {
-		.name = "cf_irq",
-		.start = (8 + 4 * 32 + CF_GPIO_NUM),	/* 149 */
-		.end = (8 + 4 * 32 + CF_GPIO_NUM),
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct cf_device cf_slot0_data = {
-	.gpio_pin = 13
-};
-
-static struct platform_device cf_slot0 = {
-	.id = 0,
-	.name = "rb500-cf",
-	.dev.platform_data = &cf_slot0_data,
-	.resource = cf_slot0_res,
-	.num_resources = ARRAY_SIZE(cf_slot0_res),
-};
-
-/* Resources and device for NAND.  There is no data needed and no irqs, so just define the memory used. */
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.  So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb500_nand_ecclayout = {
-	.eccbytes	= 6,
-	.eccpos		= { 8, 9, 10, 13, 14, 15 },
-	.oobavail	= 9,
-	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-int rb500_dev_ready(struct mtd_info *mtd)
-{
-        return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
-}
-
-void rb500_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-        struct nand_chip *chip = mtd->priv;
-        unsigned char orbits, nandbits;
-
-        if (ctrl & NAND_CTRL_CHANGE) {
-
-                orbits = (ctrl & NAND_CLE) << 1;
-                orbits |= (ctrl & NAND_ALE) >> 1;
-
-                nandbits = (~ctrl & NAND_CLE) << 1;
-                nandbits |= (~ctrl & NAND_ALE) >> 1;
-
-                changeLatchU5(orbits, nandbits);
-        }
-        if (cmd != NAND_CMD_NONE)
-                writeb(cmd, chip->IO_ADDR_W);
-}
-
-static struct resource nand_slot0_res[] = {
-	[0] = {
-		.name = "nand_membase",
-		.flags = IORESOURCE_MEM
-	}
-};
-
-struct platform_nand_data rb500_nand_data = {
-	.ctrl.dev_ready = rb500_dev_ready,
-	.ctrl.cmd_ctrl	= rb500_cmd_ctrl,
-};
-
-static struct platform_device nand_slot0 = {
-	.name = "gen_nand",
-	.id = -1,
-	.resource = nand_slot0_res,
-	.num_resources = ARRAY_SIZE(nand_slot0_res),
-	.dev.platform_data = &rb500_nand_data,
-};
-
-static struct mtd_partition rb500_partition_info[] = {
-	{
-		.name = "Routerboard NAND boot",
-		.offset = 0,
-		.size = 4 * 1024 * 1024,
-	}, {
-		.name = "rootfs",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_device rb500_led = {
-	.name = "rb500-led",
-	.id = 0,
-};
-
-static struct gpio_keys_button rb500_gpio_btn[] = {
-	{
-		.gpio = 1,
-		.code = BTN_0,
-		.desc = "S1",
-		.active_low = 1,
-	}
-};
-
-static struct gpio_keys_platform_data rb500_gpio_btn_data = {
-	.buttons = rb500_gpio_btn,
-	.nbuttons = ARRAY_SIZE(rb500_gpio_btn),
-};
-
-static struct platform_device rb500_button = {
-	.name 	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &rb500_gpio_btn_data,
-	}
-};
-
-static struct platform_device *rb500_devs[] = {
-	&korina_dev0,
-	&nand_slot0,
-	&cf_slot0,
-	&rb500_led,
-	&rb500_button
-};
-
-static void __init parse_mac_addr(char *macstr)
-{
-	int i, j;
-	unsigned char result, value;
-
-	for (i = 0; i < 6; i++) {
-		result = 0;
-
-		if (i != 5 && *(macstr + 2) != ':')
-			return;
-
-		for (j = 0; j < 2; j++) {
-			if (isxdigit(*macstr)
-			    && (value =
-				isdigit(*macstr) ? *macstr -
-				'0' : toupper(*macstr) - 'A' + 10) < 16) {
-				result = result * 16 + value;
-				macstr++;
-			} else
-				return;
-		}
-
-		macstr++;
-		korina_dev0_data.mac[i] = result;
-	}
-}
-
-
-/* DEVICE CONTROLLER 1 */
-#define CFG_DC_DEV1 (void*)0xb8010010
-#define CFG_DC_DEV2 (void*)0xb8010020
-#define CFG_DC_DEVBASE    0x0
-#define CFG_DC_DEVMASK    0x4
-#define CFG_DC_DEVC       0x8
-#define CFG_DC_DEVTC      0xC
-
-/* NAND definitions */
-#define NAND_CHIP_DELAY	25
-
-static int rb500_nand_fixup(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (mtd->writesize == 512)
-		chip->ecc.layout = &rb500_nand_ecclayout;
-
-	return 0;
-}
-
-static void __init rb500_nand_setup(void)
-{
-	switch (mips_machtype) {
-	case MACH_MIKROTIK_RB532A:
-		changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX);
-		break;
-	default:
-		changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE);
-		break;
-	}
-
-	/* Setup NAND specific settings */
-	rb500_nand_data.chip.nr_chips = 1;
-	rb500_nand_data.chip.nr_partitions = ARRAY_SIZE(rb500_partition_info);
-	rb500_nand_data.chip.partitions = rb500_partition_info;
-	rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
-	rb500_nand_data.chip.options = NAND_NO_AUTOINCR;
-
-	rb500_nand_data.chip.chip_fixup = &rb500_nand_fixup;
-}
-
-
-static int __init plat_setup_devices(void)
-{
-	/* Look for the CF card reader */
-	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
-		rb500_devs[1] = NULL;
-	else {
-		cf_slot0_res[0].start =
-		    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
-		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
-	}
-
-	/* Read the NAND resources from the device controller */
-	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
-	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
-
-	/* Initialise the NAND device */
-	rb500_nand_setup();
-
-	return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs));
-}
-
-static int __init setup_kmac(char *s)
-{
-	printk("korina mac = %s\n", s);
-	parse_mac_addr(s);
-	return 0;
-}
-
-__setup("kmac=", setup_kmac);
-
-arch_initcall(plat_setup_devices);
diff --git a/target/linux/rb532/files/arch/mips/rb500/gpio.c b/target/linux/rb532/files/arch/mips/rb500/gpio.c
deleted file mode 100644
index 6c92a8fe5..000000000
--- a/target/linux/rb532/files/arch/mips/rb500/gpio.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- *  Miscellaneous functions for IDT EB434 board
- *
- *  Copyright 2004 IDT Inc. (rischelp@idt.com)
- *  Copyright 2006 Phil Sutter <n0-1@freewrt.org>
- *  Copyright 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/addrspace.h>
-#include <asm/gpio.h>
-
-#include <asm/rc32434/rb.h>
-
-#define GPIO_BADDR  0x18050000
-
-static volatile unsigned char *devCtl3Base;
-static unsigned char latchU5State;
-static spinlock_t clu5Lock = SPIN_LOCK_UNLOCKED;
-
-struct rb500_gpio_reg __iomem *rb500_gpio_reg0;
-EXPORT_SYMBOL(rb500_gpio_reg0);
-
-static struct resource rb500_gpio_reg0_res[] = {
-	{
-		.name 	= "gpio_reg0",
-		.start 	= GPIO_BADDR,
-		.end 	= GPIO_BADDR + sizeof(struct rb500_gpio_reg),
-		.flags 	= IORESOURCE_MEM,
-	}
-};
-
-void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val)
-{
-	unsigned flags, data;
-	unsigned i = 0;
-
-	spin_lock_irqsave(&clu5Lock, flags);
-	data = *(volatile unsigned *) (IDT434_REG_BASE + regOffs);
-	for (i = 0; i != len; ++i) {
-		if (val & (1 << i))
-			data |= (1 << (i + bit));
-		else
-			data &= ~(1 << (i + bit));
-	}
-	*(volatile unsigned *) (IDT434_REG_BASE + regOffs) = data;
-	spin_unlock_irqrestore(&clu5Lock, flags);
-}
-EXPORT_SYMBOL(set434Reg);
-
-void changeLatchU5(unsigned char orMask, unsigned char nandMask)
-{
-	unsigned flags;
-
-	spin_lock_irqsave(&clu5Lock, flags);
-	latchU5State = (latchU5State | orMask) & ~nandMask;
-	if (!devCtl3Base)
-		devCtl3Base = (volatile unsigned char *)
-		    KSEG1ADDR(*(volatile unsigned *)
-			      KSEG1ADDR(0x18010030));
-	*devCtl3Base = latchU5State;
-	spin_unlock_irqrestore(&clu5Lock, flags);
-}
-EXPORT_SYMBOL(changeLatchU5);
-
-unsigned char getLatchU5State(void)
-{
-	return latchU5State;
-}
-EXPORT_SYMBOL(getLatchU5State);
-
-int rb500_gpio_get_value(unsigned gpio)
-{
-	return readl(&rb500_gpio_reg0->gpiod) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb500_gpio_get_value);
-
-void rb500_gpio_set_value(unsigned gpio, int value)
-{
-	unsigned tmp;
-
-	tmp = readl(&rb500_gpio_reg0->gpiod) & ~(1 << gpio);
-	if (value)
-		tmp |= 1 << gpio;
-
-	writel(tmp, (void *)&rb500_gpio_reg0->gpiod);
-}
-EXPORT_SYMBOL(rb500_gpio_set_value);
-
-int rb500_gpio_direction_input(unsigned gpio)
-{
-	writel(readl(&rb500_gpio_reg0->gpiocfg) & ~(1 << gpio), (void *)&rb500_gpio_reg0->gpiocfg);
-
-	return 0;
-}
-EXPORT_SYMBOL(rb500_gpio_direction_input);
-
-int rb500_gpio_direction_output(unsigned gpio, int value)
-{
-	gpio_set_value(gpio, value);
-	writel(readl(&rb500_gpio_reg0->gpiocfg) | (1 << gpio), (void *)&rb500_gpio_reg0->gpiocfg);
-
-	return 0;
-}
-EXPORT_SYMBOL(rb500_gpio_direction_output);
-
-void rb500_gpio_set_int_level(unsigned gpio, int value)
-{
-	unsigned tmp;
-
-	tmp = readl(&rb500_gpio_reg0->gpioilevel) & ~(1 << gpio);
-	if (value)
-		tmp |= 1 << gpio;
-	writel(tmp, (void *)&rb500_gpio_reg0->gpioilevel);
-}
-EXPORT_SYMBOL(rb500_gpio_set_int_level);
-
-int rb500_gpio_get_int_level(unsigned gpio)
-{
-	return readl(&rb500_gpio_reg0->gpioilevel) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb500_gpio_get_int_level);
-
-void rb500_gpio_set_int_status(unsigned gpio, int value)
-{
-	unsigned tmp;
-
-	tmp = readl(&rb500_gpio_reg0->gpioistat);
-	if (value)
-		tmp |= 1 << gpio;
-	writel(tmp, (void *)&rb500_gpio_reg0->gpioistat);
-}
-EXPORT_SYMBOL(rb500_gpio_set_int_status);
-
-int rb500_gpio_get_int_status(unsigned gpio)
-{
-	return readl(&rb500_gpio_reg0->gpioistat) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb500_gpio_get_int_status);
-
-void rb500_gpio_set_func(unsigned gpio, int value)
-{
-        unsigned tmp;
-
-        tmp = readl(&rb500_gpio_reg0->gpiofunc);
-        if (value)
-                tmp |= 1 << gpio;
-        writel(tmp, (void *)&rb500_gpio_reg0->gpiofunc);
-}
-EXPORT_SYMBOL(rb500_gpio_set_func);
-
-int rb500_gpio_get_func(unsigned gpio)
-{
-        return readl(&rb500_gpio_reg0->gpiofunc) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb500_gpio_get_func);
-
-int __init rb500_gpio_init(void)
-{
-	rb500_gpio_reg0 = ioremap_nocache(rb500_gpio_reg0_res[0].start,
-				rb500_gpio_reg0_res[0].end -
-				rb500_gpio_reg0_res[0].start);
-
-	if (!rb500_gpio_reg0) {
-		printk(KERN_ERR "rb500: cannot remap GPIO register 0\n");
-		return -ENXIO;
-	}
-
-	return 0;
-}
-arch_initcall(rb500_gpio_init);
diff --git a/target/linux/rb532/files/arch/mips/rb500/irq.c b/target/linux/rb532/files/arch/mips/rb500/irq.c
deleted file mode 100644
index 5a4d349d4..000000000
--- a/target/linux/rb532/files/arch/mips/rb500/irq.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	RC32434 interrupt routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *		stevel@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-
-#include <asm/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/gpio.h>
-
-extern void set_debug_traps(void);
-extern irq_cpustat_t irq_stat [NR_CPUS];
-unsigned int local_bh_count[NR_CPUS];
-unsigned int local_irq_count[NR_CPUS];
-
-static unsigned int startup_irq(unsigned int irq);
-static void rb500_end_irq(unsigned int irq_nr);
-static void mask_and_ack_irq(unsigned int irq_nr);
-static void rb500_enable_irq(unsigned int irq_nr);
-static void rb500_disable_irq(unsigned int irq_nr);
-
-extern void __init init_generic_irq(void);
-extern struct rb500_gpio_reg __iomem *rb500_gpio_reg0;
-
-typedef struct {
-  u32 mask;       /* mask of valid bits in pending/mask registers */
-  volatile u32 *base_addr;
-} intr_group_t;
-
-#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
-
-#if (NR_IRQS < RC32434_NR_IRQS)
-#error Too little irqs defined. Did you override <asm/irq.h> ?
-#endif
-
-static const intr_group_t intr_group[NUM_INTR_GROUPS] = {
-  { 0x0000efff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET) },
-  { 0x00001fff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET) },
-  { 0x00000007, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET) },
-  { 0x0003ffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET) },
-  { 0xffffffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET) }
-};
-
-#define READ_PEND(base) (*(base))
-#define READ_MASK(base) (*(base + 2))
-#define WRITE_MASK(base, val) (*(base + 2) = (val))
-
-static inline int irq_to_group(unsigned int irq_nr)
-{
-  return ((irq_nr - GROUP0_IRQ_BASE) >> 5);
-}
-
-static inline int group_to_ip(unsigned int group)
-{
-  return group + 2;
-}
-
-static inline void enable_local_irq(unsigned int ip)
-{
-  int ipnum = 0x100 << ip;
-  clear_c0_cause(ipnum);
-  set_c0_status(ipnum);
-}
-
-static inline void disable_local_irq(unsigned int ip)
-{
-  int ipnum = 0x100 << ip;
-  clear_c0_status(ipnum);
-}
-
-static inline void ack_local_irq(unsigned int ip)
-{
-  int ipnum = 0x100 << ip;
-  clear_c0_cause(ipnum);
-}
-
-static void rb500_enable_irq(unsigned int irq_nr)
-{
-  int           ip = irq_nr - GROUP0_IRQ_BASE;
-  unsigned int  group, intr_bit;
-  volatile unsigned int  *addr;
-  
-  
-  if (ip < 0)
-    enable_local_irq(irq_nr);
-  else {
-    group = ip >> 5;
- 
-    ip &= (1<<5)-1;
-    intr_bit = 1 << ip;
- 
-    enable_local_irq(group_to_ip(group));
-    
-    addr = intr_group[group].base_addr;
-    WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
-  }
-}
-
-static void rb500_disable_irq(unsigned int irq_nr)
-{
-  int           ip = irq_nr - GROUP0_IRQ_BASE;
-  unsigned int  group, intr_bit, mask;
-  volatile unsigned int  *addr;
-  
-  if (ip < 0) {
-	disable_local_irq(irq_nr);
-    }else{
-    group = ip >> 5;
-    
-    ip &= (1<<5) -1;
-    intr_bit = 1 << ip;
-    addr = intr_group[group].base_addr;
-    mask = READ_MASK(addr);
-    mask |= intr_bit;
-    WRITE_MASK(addr,mask);
-   
-    /*
-     * if there are no more interrupts enabled in this
-     * group, disable corresponding IP
-     */
-    if (mask == intr_group[group].mask)
-      disable_local_irq(group_to_ip(group));
-  }
-}
-
-static unsigned int startup_irq(unsigned int irq_nr)
-{
-  rb500_enable_irq(irq_nr);
-  return 0; 
-}
-
-static void shutdown_irq(unsigned int irq_nr)
-{
-  rb500_disable_irq(irq_nr);
-  return;
-}
-
-static void mask_and_ack_irq(unsigned int irq_nr)
-{
-  rb500_disable_irq(irq_nr);
-  ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
-}
-
-static void rb500_end_irq(unsigned int irq_nr)
-{
-
-  int ip = irq_nr - GROUP0_IRQ_BASE;
-  unsigned int intr_bit, group;
-  volatile unsigned int *addr;
-
-	if ((irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
-		printk("warning: end_irq %d did not enable (%x)\n", 
-			irq_nr, irq_desc[irq_nr].status);
-		return;
-	}
-	
-	if (ip < 0) {
-		enable_local_irq(irq_nr);
-	} else {
-		group = ip >> 5;
-	
-		ip &= (1 << 5) - 1;
-		intr_bit = 1 << ip;
-	
-		if (irq_nr >= GROUP4_IRQ_BASE && irq_nr <= (GROUP4_IRQ_BASE + 13)) {
-			rb500_gpio_reg0->gpioistat = rb500_gpio_reg0->gpioistat & ~intr_bit;
-		}
-	
-		enable_local_irq(group_to_ip(group));
-	
-		addr = intr_group[group].base_addr;
-		WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
-	}
-}
-
-static struct hw_interrupt_type rc32434_irq_type = {
-  .typename = "RB500",
-  .startup = startup_irq,
-  .shutdown = shutdown_irq,
-  .enable = rb500_enable_irq,
-  .disable = rb500_disable_irq,
-  .ack = mask_and_ack_irq,
-  .end = rb500_end_irq,
-};
-
-
-void __init arch_init_irq(void)
-{
-	int i;
-
-	printk("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
-	memset(irq_desc, 0, sizeof(irq_desc));
-  
-	for (i = 0; i < RC32434_NR_IRQS; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].chip = &rc32434_irq_type;
-		spin_lock_init(&irq_desc[i].lock);
-	}
-}
-
-/* Main Interrupt dispatcher */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int ip, pend, group;
-	volatile unsigned int *addr;
-	unsigned int cp0_cause = read_c0_cause() & read_c0_status();
-
-	if (cp0_cause & CAUSEF_IP7) {
-		ll_timer_interrupt(7);
-	} else if ((ip = (cp0_cause & 0x7c00))) {
-		group = 21 - rc32434_clz(ip);
-
-		addr = intr_group[group].base_addr;
-
-		pend = READ_PEND(addr);
-		pend &= ~READ_MASK(addr); // only unmasked interrupts
-		pend = 39 - rc32434_clz(pend);
-		do_IRQ((group << 5) + pend);
-	}
-}
diff --git a/target/linux/rb532/files/arch/mips/rb500/prom.c b/target/linux/rb532/files/arch/mips/rb500/prom.c
deleted file mode 100644
index b10172fb5..000000000
--- a/target/linux/rb532/files/arch/mips/rb500/prom.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
-* prom.c
-**********************************************************************
-* P . Sadik Oct 10, 2003
-*
-* Started change log
-* idt_cpu_freq is make a kernel configuration parameter
-* idt_cpu_freq is exported so that other modules can use it.
-* Code cleanup
-**********************************************************************
-* P. Sadik Oct 20, 2003
-*
-* Removed NVRAM code from here, since they are already available under
-* nvram directory.
-* Added serial port initialisation.
-**********************************************************************
-**********************************************************************
-* P. Sadik Oct 30, 2003
-*
-* Added reset_cons_port
-**********************************************************************
-
-  P.Christeas, 2005-2006
-  Port to 2.6, add 2.6 cmdline parsing
-
-*/
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/console.h>
-#include <asm/bootinfo.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <asm/rc32434/ddr.h>
-
-#define PROM_ENTRY(x)   (0xbfc00000+((x)*8))
-extern void __init setup_serial_port(void);
-
-unsigned int idt_cpu_freq = 132000000;
-EXPORT_SYMBOL(idt_cpu_freq);
-unsigned int gpio_bootup_state = 0;
-EXPORT_SYMBOL(gpio_bootup_state);
-
-char mips_mac_address[18] = "08:00:06:05:40:01";
-EXPORT_SYMBOL(mips_mac_address);
-
-/* what to append to cmdline when button is [not] pressed */
-#define GPIO_INIT_NOBUTTON ""
-#define GPIO_INIT_BUTTON   " 2"
-
-#ifdef CONFIG_MIKROTIK_RB500
-unsigned soft_reboot = 0;
-EXPORT_SYMBOL(soft_reboot);
-#endif
-
-#define SR_NMI			0x00180000      /* NMI */
-#define SERIAL_SPEED_ENTRY	0x00000001
-
-#ifdef CONFIG_REMOTE_DEBUG
-extern int remote_debug;
-#endif
-
-#define FREQ_TAG   "HZ="
-#define GPIO_TAG   "gpio="
-#define KMAC_TAG   "kmac="
-#define MEM_TAG	   "mem="
-#define BOARD_TAG  "board="
-#define IGNORE_CMDLINE_MEM 1
-#define DEBUG_DDR
-
-#define BOARD_RB532	"500"
-#define BOARD_RB532A	"500r5"
-
-void parse_soft_settings(unsigned *ptr, unsigned size);
-void parse_hard_settings(unsigned *ptr, unsigned size);
-
-void __init prom_setup_cmdline(void);
-
-void __init prom_init(void)
-{
-	DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */
-	phys_t memsize = 0-ddr->ddrmask;
-
-	/* this should be the very first message, even before serial is properly initialized */
-	prom_setup_cmdline();
-	setup_serial_port();
-
-	mips_machgroup = MACH_GROUP_MIKROTIK;
-	soft_reboot = read_c0_status() & SR_NMI;
-	pm_power_off = NULL;
-
-	/*
-	 * give all RAM to boot allocator,
-	 * except for the first 0x400 and the last 0x200 bytes
-	 */
-	add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-	/* No prom memory to free */
-}
-
-static inline int match_tag(char *arg, const char *tag)
-{
-	return (strncmp(arg, tag, strlen(tag)) == 0);
-}
-
-static inline unsigned long tag2ul(char *arg, const char *tag)
-{
-	char *num = arg+strlen(tag);
-	return simple_strtoul(num, 0, 10);
-}
-
-extern char _image_cmdline;
-void __init prom_setup_cmdline(void){
-	char cmd_line[CL_SIZE];
-	char *cp;
-	int prom_argc;
-	char **prom_argv, **prom_envp;
-	int i;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **) fw_arg1;
-	prom_envp = (char **) fw_arg2;
-
-	cp=cmd_line;
-		/* Note: it is common that parameters start at argv[1] and not argv[0],
-		however, our elf loader starts at [0] */
-	for(i=0;i<prom_argc;i++){
-		if (match_tag(prom_argv[i], FREQ_TAG)) {
-			idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
-			continue;
-		}
-#ifdef IGNORE_CMDLINE_MEM
-		/* parses out the "mem=xx" arg */
-		if (match_tag(prom_argv[i], MEM_TAG)) {
-			continue;
-		}
-#endif
-		if (i>0) *(cp++) = ' ';
-		if (match_tag(prom_argv[i], BOARD_TAG)) {
-			char *board = prom_argv[i] + strlen(BOARD_TAG);
-			if (match_tag(board, BOARD_RB532A))
-				mips_machtype = MACH_MIKROTIK_RB532A;
-			else
-				mips_machtype = MACH_MIKROTIK_RB532;
-		}
-
-		if (match_tag(prom_argv[i], GPIO_TAG)) {
-			gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
-		}
-		strcpy(cp,prom_argv[i]);
-		cp+=strlen(prom_argv[i]);
-	}
-	*(cp++) = ' ';
-	strcpy(cp,(&_image_cmdline + 8));
-	cp += strlen(&_image_cmdline);
-
-	i=strlen(arcs_cmdline);
-	if (i>0){
-		*(cp++) = ' ';
-		strcpy(cp,arcs_cmdline);
-		cp+=strlen(arcs_cmdline);
-	}
-	if (gpio_bootup_state&0x02)
-		strcpy(cp,GPIO_INIT_NOBUTTON);
-	else
-		strcpy(cp,GPIO_INIT_BUTTON);
-	cmd_line[CL_SIZE-1] = '\0';
-
-	strcpy(arcs_cmdline,cmd_line);
-}
-
diff --git a/target/linux/rb532/files/arch/mips/rb500/serial.c b/target/linux/rb532/files/arch/mips/rb500/serial.c
deleted file mode 100644
index 25a03e010..000000000
--- a/target/linux/rb532/files/arch/mips/rb500/serial.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/**************************************************************************
- *
- *  BRIEF MODULE DESCRIPTION
- *     Serial port initialisation.
- *
- *  Copyright 2004 IDT Inc. (rischelp@idt.com)
- *         
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- **************************************************************************
- * May 2004 rkt, neb
- *
- * Initial Release
- *
- * 
- *
- **************************************************************************
- */
-
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/time.h>
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/serial.h>
-#include <asm/rc32434/rc32434.h>
-
-extern unsigned int idt_cpu_freq;
-
-static struct uart_port serial_req = {
-	.type = PORT_16550A,
-	.line = 0,
-	.irq = RC32434_UART0_IRQ,
-	//.flags = STD_COM_FLAGS,
-	.iotype = UPIO_MEM,
-	.membase = (char *) KSEG1ADDR(RC32434_UART0_BASE),
-//	.fifosize = 14
-	.regshift = 2
-};
-
-int __init setup_serial_port(void)
-{
-	serial_req.uartclk = idt_cpu_freq;
-
-	if (early_serial_setup(&serial_req))
-		return -ENODEV;
-	
-	return(0);
-}
diff --git a/target/linux/rb532/files/arch/mips/rb500/setup.c b/target/linux/rb532/files/arch/mips/rb500/setup.c
deleted file mode 100644
index 2fda0e2ab..000000000
--- a/target/linux/rb532/files/arch/mips/rb500/setup.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * setup.c - boot time setup code
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/irq.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-#include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/reboot.h>
-#include <asm/addrspace.h>     /* for KSEG1ADDR() */
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/pci.h>
-
-#ifdef CONFIG_PCI
-extern void rc32434_time_init(void);
-extern int __init rc32434_pcibridge_init(void);
-#endif
-
-#define epldMask ((volatile unsigned char *)0xB900000d)
-
-static void rb_machine_restart(char *command)
-{
-	/* just jump to the reset vector */
-	* (volatile unsigned *) KSEG1ADDR(0x18008000) = 0x80000001;
-	((void (*)(void))KSEG1ADDR(0x1FC00000u))();
-}
-
-static void rb_machine_halt(void)
-{
-	for(;;) continue;
-}
-
-#ifdef CONFIG_CPU_HAS_WB
-void (*__wbflush) (void);
-
-static void rb_write_buffer_flush(void)
-{
-	__asm__ __volatile__
-	    ("sync\n\t" "nop\n\t" "loop: bc0f loop\n\t" "nop\n\t");
-}
-#endif
-
-void __init plat_mem_setup(void)
-{
-	unsigned int pciCntlVal;
-
-	board_time_init = rc32434_time_init;
-
-#ifdef CONFIG_CPU_HAS_WB
-	__wbflush = rb_write_buffer_flush;
-#endif
-	_machine_restart = rb_machine_restart;
-	_machine_halt = rb_machine_halt;
-	/*_machine_power_off = rb_machine_power_halt;*/
-	pm_power_off = rb_machine_halt;
-
-	set_io_port_base(KSEG1);
-
-	pciCntlVal=rc32434_pci->pcic;
-	pciCntlVal &= 0xFFFFFF7;
-	rc32434_pci->pcic = pciCntlVal;
-
-#ifdef CONFIG_PCI
-	/* Enable PCI interrupts in EPLD Mask register */
-	*epldMask = 0x0;
-	*(epldMask + 1) = 0x0;
-#endif
-	write_c0_wired(0);
-}
-
-const char *get_system_type(void)
-{
-	return "MIPS RB500";
-}
diff --git a/target/linux/rb532/files/arch/mips/rb500/time.c b/target/linux/rb532/files/arch/mips/rb500/time.c
deleted file mode 100644
index 13320a6ca..000000000
--- a/target/linux/rb532/files/arch/mips/rb500/time.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
-****************************************************************************
-* Carsten Langgaard, carstenl@mips.com
-* Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-*
-***************************************************************************
-*
-*  This program is free software; you can distribute it and/or modify it
-*  under the terms of the GNU General Public License (Version 2) as
-*  published by the Free Software Foundation.
-*
-*  This program is distributed in the hope it will be useful, but WITHOUT
-*  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-*  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-*  for more details.
-*
-*  You should have received a copy of the GNU General Public License along
-*  with this program; if not, write to the Free Software Foundation, Inc.,
-*  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-*
-****************************************************************************
-*
-* Setting up the clock on the MIPS boards.
-*
-****************************************************************************
-* P. Sadik Oct 10, 2003
-*
-* Started change log.
-* mips_counter_frequency is now calculated at run time, based on idt_cpu_freq.
-* Code cleanup
-****************************************************************************
-*/
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/mc146818rtc.h>
-#include <linux/irq.h>
-#include <linux/timex.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/ptrace.h>
-#include <asm/debug.h>
-#include <asm/rc32434/rc32434.h>
-
-static unsigned long r4k_offset; /* Amount to incr compare reg each time */
-static unsigned long r4k_cur;    /* What counter should be at next timer irq */
-extern unsigned int mips_hpt_frequency;
-extern unsigned int idt_cpu_freq;
-
-/* 
- * Figure out the r4k offset, the amount to increment the compare
- * register for each time tick. There is no RTC available.
- *
- * The RC32434 counts at half the CPU *core* speed.
- */
-static unsigned long __init cal_r4koff(void)
-{
-	mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
-	return (mips_hpt_frequency / HZ);
-}
-
-
-void __init rc32434_time_init(void)
-{
-	unsigned int est_freq, flags;
-
-	local_irq_save(flags);
-
-	printk("calculating r4koff... ");
-	r4k_offset = cal_r4koff();
-	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
-
-	est_freq = 2*r4k_offset*HZ;	
-	est_freq += 5000;	/* round */
-	est_freq -= est_freq%10000;
-	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, 
-	       (est_freq%1000000)*100/1000000);
-	local_irq_restore(flags);
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	/* we are using the cpu counter for timer interrupts */
-	setup_irq(MIPS_CPU_TIMER_IRQ, irq);
-
-	/* to generate the first timer interrupt */
-	r4k_cur = (read_c0_count() + r4k_offset);
-	write_c0_compare(r4k_cur);
-}
-