ramips: remove 2.6.37 stuff

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27398 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 0 insertions, 320 deletions

diff --git a/target/linux/ramips/patches-2.6.37/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-2.6.37/001-mips-add-cp0-compare-irq-function.patch
deleted file mode 100644
index 38d997ef6..000000000
--- a/target/linux/ramips/patches-2.6.37/001-mips-add-cp0-compare-irq-function.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -54,6 +54,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/uasm.h>
-+#include <asm/time.h>
- 
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1578,6 +1579,8 @@ void __cpuinit per_cpu_trap_init(void)
- 	if (cpu_has_mips_r2) {
- 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+		if (get_c0_compare_irq)
-+			cp0_compare_irq = get_c0_compare_irq();
- 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
- 		if (cp0_perfcount_irq == cp0_compare_irq)
- 			cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
-  */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
- 
diff --git a/target/linux/ramips/patches-2.6.37/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-2.6.37/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
deleted file mode 100644
index 67801891a..000000000
--- a/target/linux/ramips/patches-2.6.37/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1640,7 +1640,7 @@ static int __xipram do_erase_chip(struct
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr))
-+		if (chip_good(map, adr, map_word_ff(map)))
- 			break;
- 
- 		if (time_after(jiffies, timeo)) {
-@@ -1728,7 +1728,7 @@ static int __xipram do_erase_oneblock(st
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr)) {
-+		if (chip_good(map, adr, map_word_ff(map))) {
- 			xip_enable(map, chip, adr);
- 			break;
- 		}
diff --git a/target/linux/ramips/patches-2.6.37/011-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-2.6.37/011-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644
index 8e93b10aa..000000000
--- a/target/linux/ramips/patches-2.6.37/011-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- #define MAX_WORD_RETRIES 3
- 
-@@ -50,7 +50,9 @@
- 
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
- 
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- {
- 	struct map_info *map = mtd->priv;
-@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
- 		mtd->write = cfi_amdstd_write_buffers;
- 	}
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-@@ -472,7 +476,7 @@ struct mtd_info *cfi_cmdset_0002(struct 
- 
- 			/*
- 			 * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
-- 			 * see: Spec 1.3 http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 
-+ 			 * see: Spec 1.3 http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19
-  			 *               http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
- 			 *      Spec 1.4 http://www.spansion.com/Support/AppNotes/CFI_Spec_AN_03.pdf, page 9
- 			 */
-@@ -1386,6 +1390,7 @@ static int cfi_amdstd_write_words(struct
- /*
-  * FIXME: interleaved mode not tested, and probably not supported!
-  */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- 				    unsigned long adr, const u_char *buf,
- 				    int len)
-@@ -1496,7 +1501,6 @@ static int __xipram do_write_buffer(stru
- 	return ret;
- }
- 
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- 				    size_t *retlen, const u_char *buf)
- {
-@@ -1575,6 +1579,7 @@ static int cfi_amdstd_write_buffers(stru
- 
- 	return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- 
- /*
diff --git a/target/linux/ramips/patches-2.6.37/100-mips-ralink-core.patch b/target/linux/ramips/patches-2.6.37/100-mips-ralink-core.patch
deleted file mode 100644
index 178a4bad7..000000000
--- a/target/linux/ramips/patches-2.6.37/100-mips-ralink-core.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -158,6 +158,26 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -W
- endif
- cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
- 
-+#
-+# Ralink SoC common stuff
-+#
-+core-$(CONFIG_MIPS_RALINK)	+= arch/mips/ralink/common/
-+cflags-$(CONFIG_MIPS_RALINK)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink
-+
-+#
-+# Ralink RT288x
-+#
-+core-$(CONFIG_RALINK_RT288X)	+= arch/mips/ralink/rt288x/
-+cflags-$(CONFIG_RALINK_RT288X)	+= -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x
-+load-$(CONFIG_RALINK_RT288X)	+= 0xffffffff88000000
-+
-+#
-+# Ralink RT305x
-+#
-+core-$(CONFIG_RALINK_RT305X)	+= arch/mips/ralink/rt305x/
-+cflags-$(CONFIG_RALINK_RT305X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
-+load-$(CONFIG_RALINK_RT305X)	+= 0xffffffff80000000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -65,6 +65,9 @@ config AR7
- 	  Support for the Texas Instruments AR7 System-on-a-Chip
- 	  family: TNETD7100, 7200 and 7300.
- 
-+config MIPS_RALINK
-+	bool "Ralink MIPS SoC based boards"
-+
- config BCM47XX
- 	bool "Broadcom BCM47XX based boards"
- 	select CEVT_R4K
-@@ -722,6 +725,7 @@ source "arch/mips/jazz/Kconfig"
- source "arch/mips/jz4740/Kconfig"
- source "arch/mips/lasat/Kconfig"
- source "arch/mips/pmc-sierra/Kconfig"
-+source "arch/mips/ralink/Kconfig"
- source "arch/mips/powertv/Kconfig"
- source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
-@@ -1081,7 +1085,7 @@ config BOOT_ELF32
- 
- config MIPS_L1_CACHE_SHIFT
- 	int
--	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
-+	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
- 	default "6" if MIPS_CPU_SCACHE
- 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
- 	default "5"
diff --git a/target/linux/ramips/patches-2.6.37/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-2.6.37/101-rt288x_serial_driver_hack.patch
deleted file mode 100644
index 441f98385..000000000
--- a/target/linux/ramips/patches-2.6.37/101-rt288x_serial_driver_hack.patch
+++ /dev/null
@@ -1,82 +0,0 @@
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -305,9 +305,9 @@ static const struct serial8250_config ua
- 	},
- };
- 
--#if defined(CONFIG_MIPS_ALCHEMY)
-+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
- 
--/* Au1x00 UART hardware has a weird register layout */
-+/* Au1x00 and RT288x UART hardware has a weird register layout */
- static const u8 au_io_in_map[] = {
- 	[UART_RX]  = 0,
- 	[UART_IER] = 2,
-@@ -571,8 +571,8 @@ static inline void _serial_dl_write(stru
- 	serial_outp(up, UART_DLM, value >> 8 & 0xff);
- }
- 
--#if defined(CONFIG_MIPS_ALCHEMY)
--/* Au1x00 haven't got a standard divisor latch */
-+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
-+/* Au1x00 and RT288x haven't got a standard divisor latch */
- static int serial_dl_read(struct uart_8250_port *up)
- {
- 	if (up->port.iotype == UPIO_AU)
-@@ -779,22 +779,19 @@ static int size_fifo(struct uart_8250_po
-  */
- static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
- {
--	unsigned char old_dll, old_dlm, old_lcr;
-+	unsigned char old_lcr;
-+	unsigned int old_dl;
- 	unsigned int id;
- 
- 	old_lcr = serial_inp(p, UART_LCR);
- 	serial_outp(p, UART_LCR, UART_LCR_DLAB);
- 
--	old_dll = serial_inp(p, UART_DLL);
--	old_dlm = serial_inp(p, UART_DLM);
-+	old_dl = serial_dl_read(p);
- 
--	serial_outp(p, UART_DLL, 0);
--	serial_outp(p, UART_DLM, 0);
-+	serial_dl_write(p, 0);
-+	id = serial_dl_read(p);
- 
--	id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
--
--	serial_outp(p, UART_DLL, old_dll);
--	serial_outp(p, UART_DLM, old_dlm);
-+	serial_dl_write(p, old_dl);
- 	serial_outp(p, UART_LCR, old_lcr);
- 
- 	return id;
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -258,6 +258,14 @@ config SERIAL_8250_ACORN
- 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
- 	  cards.  If unsure, say N.
- 
-+config SERIAL_8250_RT288X
-+	bool "Ralink RT288x/RT305x serial port support"
-+	depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
-+	help
-+	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
-+	  serial port, say Y to this option. The driver can handle up to 2 serial
-+	  ports. If unsure, say N.
-+
- config SERIAL_8250_RM9K
- 	bool "Support for MIPS RM9xxx integrated serial port"
- 	depends on SERIAL_8250 != n && SERIAL_RM9000
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -307,7 +307,7 @@ struct uart_port {
- #define UPIO_HUB6		(1)
- #define UPIO_MEM		(2)
- #define UPIO_MEM32		(3)
--#define UPIO_AU			(4)			/* Au1x00 type IO */
-+#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
- #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
- #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
- #define UPIO_RM9000		(7)			/* RM9000 type IO */
diff --git a/target/linux/ramips/patches-2.6.37/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-2.6.37/102-rt288x-pci-driver-hook.patch
deleted file mode 100644
index d2056c646..000000000
--- a/target/linux/ramips/patches-2.6.37/102-rt288x-pci-driver-hook.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capc
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
-+obj-$(CONFIG_SOC_RT288X)	+= pci-rt288x.o
- 
- ifdef CONFIG_PCI_MSI
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
diff --git a/target/linux/ramips/patches-2.6.37/103-ethernet.patch b/target/linux/ramips/patches-2.6.37/103-ethernet.patch
deleted file mode 100644
index bf6e094e8..000000000
--- a/target/linux/ramips/patches-2.6.37/103-ethernet.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -494,6 +494,12 @@ config MIPS_AU1X00_ENET
- 	  If you have an Alchemy Semi AU1X00 based system
- 	  say Y.  Otherwise, say N.
- 
-+config MIPS_RAMIPS_NET
-+	tristate "Ethernet driver for rt288x/rt305x"
-+	depends on MIPS_RALINK
-+	help
-+	  This driver supports the etehrnet mac inside the ralink wisocs
-+
- config SGI_IOC3_ETH
- 	bool "SGI IOC3 Ethernet"
- 	depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -225,6 +225,7 @@ obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
-+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
- obj-$(CONFIG_ATARILANCE) += atarilance.o
diff --git a/target/linux/ramips/patches-2.6.37/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-2.6.37/104-ramips-watchdog-driver.patch
deleted file mode 100644
index 643a6a0b6..000000000
--- a/target/linux/ramips/patches-2.6.37/104-ramips-watchdog-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -930,6 +930,13 @@ config BCM63XX_WDT
- 	  To compile this driver as a loadable module, choose M here.
- 	  The module will be called bcm63xx_wdt.
- 
-+config RAMIPS_WDT
-+	tristate "Ralink RT288X/RT305X Watchdog Timer"
-+	depends on SOC_RT288X || SOC_RT305X
-+	help
-+	  Hardware driver for the built-in watchdog timer on the
-+	  Ralink RT288X/RT305X SoCs.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -119,6 +119,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
-+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
- 
- # PARISC Architecture
-