diff options
author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-08-15 14:11:55 +0000 |
---|---|---|
committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-08-15 14:11:55 +0000 |
commit | a6ff6c1f36b886b61a08ac89996ee15340e6fc64 (patch) | |
tree | 23cf42f4b229a588b1a018b63afebc6df3b55a83 /target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_pcd.c | |
parent | bf5f735641b53a1e47871f8aa04d2956a427c3bc (diff) |
ramips: rt305x: add dwc_otg driver
Based on a patch by Layne Edwards <ledwards@astrumtech.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27997 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_pcd.c')
-rw-r--r-- | target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_pcd.c | 2493 |
1 files changed, 2493 insertions, 0 deletions
diff --git a/target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_pcd.c b/target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_pcd.c new file mode 100644 index 000000000..2556b2cc9 --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_pcd.c @@ -0,0 +1,2493 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ + * $Revision: 1.5 $ + * $Date: 2008-11-27 09:21:25 $ + * $Change: 1115682 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_HOST_ONLY + +/** @file + * This file implements the Peripheral Controller Driver. + * + * The Peripheral Controller Driver (PCD) is responsible for + * translating requests from the Function Driver into the appropriate + * actions on the DWC_otg controller. It isolates the Function Driver + * from the specifics of the controller by providing an API to the + * Function Driver. + * + * The Peripheral Controller Driver for Linux will implement the + * Gadget API, so that the existing Gadget drivers can be used. + * (Gadget Driver is the Linux terminology for a Function Driver.) + * + * The Linux Gadget API is defined in the header file + * <code><linux/usb_gadget.h></code>. The USB EP operations API is + * defined in the structure <code>usb_ep_ops</code> and the USB + * Controller API is defined in the structure + * <code>usb_gadget_ops</code>. + * + * An important function of the PCD is managing interrupts generated + * by the DWC_otg controller. The implementation of the DWC_otg device + * mode interrupt service routines is in dwc_otg_pcd_intr.c. + * + * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). + * @todo Does it work when the request size is greater than DEPTSIZ + * transfer size + * + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> +#include <linux/version.h> + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) +# include <linux/usb/ch9.h> +#else +# include <linux/usb_ch9.h> +#endif + +#include <linux/usb_gadget.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_pcd.h" + + +/** + * Static PCD pointer for use in usb_gadget_register_driver and + * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init. + */ +static dwc_otg_pcd_t *s_pcd = 0; + + +/* Display the contents of the buffer */ +extern void dump_msg(const u8 *buf, unsigned int length); + + +/** + * This function completes a request. It call's the request call back. + */ +void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req, + int status) +{ + unsigned stopped = ep->stopped; + + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep); + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) { + req->req.status = status; + } else { + status = req->req.status; + } + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + SPIN_UNLOCK(&ep->pcd->lock); + req->req.complete(&ep->ep, &req->req); + SPIN_LOCK(&ep->pcd->lock); + + if (ep->pcd->request_pending > 0) { + --ep->pcd->request_pending; + } + + ep->stopped = stopped; +} + +/** + * This function terminates all the requsts in the EP request queue. + */ +void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep) +{ + dwc_otg_pcd_request_t *req; + + ep->stopped = 1; + + /* called with irqs blocked?? */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, + queue); + dwc_otg_request_done(ep, req, -ESHUTDOWN); + } +} + +/* USB Endpoint Operations */ +/* + * The following sections briefly describe the behavior of the Gadget + * API endpoint operations implemented in the DWC_otg driver + * software. Detailed descriptions of the generic behavior of each of + * these functions can be found in the Linux header file + * include/linux/usb_gadget.h. + * + * The Gadget API provides wrapper functions for each of the function + * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper + * function, which then calls the underlying PCD function. The + * following sections are named according to the wrapper + * functions. Within each section, the corresponding DWC_otg PCD + * function name is specified. + * + */ + +/** + * This function assigns periodic Tx FIFO to an periodic EP + * in shared Tx FIFO mode + */ +static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t *core_if) +{ + uint32_t PerTxMsk = 1; + int i; + for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) + { + if((PerTxMsk & core_if->p_tx_msk) == 0) { + core_if->p_tx_msk |= PerTxMsk; + return i + 1; + } + PerTxMsk <<= 1; + } + return 0; +} +/** + * This function releases periodic Tx FIFO + * in shared Tx FIFO mode + */ +static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num) +{ + core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; +} +/** + * This function assigns periodic Tx FIFO to an periodic EP + * in shared Tx FIFO mode + */ +static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if) +{ + uint32_t TxMsk = 1; + int i; + + for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) + { + if((TxMsk & core_if->tx_msk) == 0) { + core_if->tx_msk |= TxMsk; + return i + 1; + } + TxMsk <<= 1; + } + return 0; +} +/** + * This function releases periodic Tx FIFO + * in shared Tx FIFO mode + */ +static void release_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num) +{ + core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; +} + +/** + * This function is called by the Gadget Driver for each EP to be + * configured for the current configuration (SET_CONFIGURATION). + * + * This function initializes the dwc_otg_ep_t data structure, and then + * calls dwc_otg_ep_activate. + */ +static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep, + const struct usb_endpoint_descriptor *ep_desc) +{ + dwc_otg_pcd_ep_t *ep = 0; + dwc_otg_pcd_t *pcd = 0; + unsigned long flags; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc); + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + if (!usb_ep || !ep_desc || ep->desc || + ep_desc->bDescriptorType != USB_DT_ENDPOINT) { + DWC_WARN("%s, bad ep or descriptor\n", __func__); + return -EINVAL; + } + if (ep == &ep->pcd->ep0) { + DWC_WARN("%s, bad ep(0)\n", __func__); + return -EINVAL; + } + + /* Check FIFO size? */ + if (!ep_desc->wMaxPacketSize) { + DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); + return -ERANGE; + } + + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + + ep->desc = ep_desc; + ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize); + + /* + * Activate the EP + */ + ep->stopped = 0; + + ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0; + ep->dwc_ep.maxpacket = ep->ep.maxpacket; + + ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + if(ep->dwc_ep.is_in) { + if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) { + ep->dwc_ep.tx_fifo_num = 0; + + if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) { + /* + * if ISOC EP then assign a Periodic Tx FIFO. + */ + ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if); + } + } else { + /* + * if Dedicated FIFOs mode is on then assign a Tx FIFO. + */ + ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if); + + } + } + /* Set initial data PID. */ + if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) { + ep->dwc_ep.data_pid_start = 0; + } + + DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n", + ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"), + ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); + + if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) { + ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT); + } + + dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + + return 0; +} + +/** + * This function is called when an EP is disabled due to disconnect or + * change in configuration. Any pending requests will terminate with a + * status of -ESHUTDOWN. + * + * This function modifies the dwc_otg_ep_t data structure for this EP, + * and then calls dwc_otg_ep_deactivate. + */ +static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep) +{ + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd = 0; + unsigned long flags; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep); + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + if (!usb_ep || !ep->desc) { + DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, + usb_ep ? ep->ep.name : NULL); + return -EINVAL; + } + + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + + dwc_otg_request_nuke(ep); + + dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep); + ep->desc = 0; + ep->stopped = 1; + + if(ep->dwc_ep.is_in) { + dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); + release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); + release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); + } + + /* Free DMA Descriptors */ + pcd = ep->pcd; + + SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags); + + if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) { + dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT); + } + + DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name); + return 0; +} + + +/** + * This function allocates a request object to use with the specified + * endpoint. + * + * @param ep The endpoint to be used with with the request + * @param gfp_flags the GFP_* flags to use. + */ +static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif + ) +{ + dwc_otg_pcd_request_t *req; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags); + if (0 == ep) { + DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); + return 0; + } + req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags); + if (0 == req) { + DWC_WARN("%s() %s\n", __func__, + "request allocation failed!\n"); + return 0; + } + memset(req, 0, sizeof(dwc_otg_pcd_request_t)); + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +/** + * This function frees a request object. + * + * @param ep The endpoint associated with the request + * @param req The request being freed + */ +static void dwc_otg_pcd_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + dwc_otg_pcd_request_t *request; + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req); + + if (0 == ep || 0 == req) { + DWC_WARN("%s() %s\n", __func__, + "Invalid ep or req argument!\n"); + return; + } + + request = container_of(req, dwc_otg_pcd_request_t, req); + kfree(request); +} + +/** + * This function allocates an I/O buffer to be used for a transfer + * to/from the specified endpoint. + * + * @param usb_ep The endpoint to be used with with the request + * @param bytes The desired number of bytes for the buffer + * @param dma Pointer to the buffer's DMA address; must be valid + * @param gfp_flags the GFP_* flags to use. + * @return address of a new buffer or null is buffer could not be allocated. + */ +static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, + dma_addr_t *dma, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif + ) +{ + void *buf; + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd = 0; + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + pcd = ep->pcd; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, + dma, gfp_flags); + + /* Check dword alignment */ + if ((bytes & 0x3UL) != 0) { + DWC_WARN("%s() Buffer size is not a multiple of" + "DWORD size (%d)",__func__, bytes); + } + + if (GET_CORE_IF(pcd)->dma_enable) { + buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags); + } + else { + buf = kmalloc(bytes, gfp_flags); + } + + /* Check dword alignment */ + if (((int)buf & 0x3UL) != 0) { + DWC_WARN("%s() Buffer is not DWORD aligned (%p)", + __func__, buf); + } + + return buf; +} + +/** + * This function frees an I/O buffer that was allocated by alloc_buffer. + * + * @param usb_ep the endpoint associated with the buffer + * @param buf address of the buffer + * @param dma The buffer's DMA address + * @param bytes The number of bytes of the buffer + */ +static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, + dma_addr_t dma, unsigned bytes) +{ + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd = 0; + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + pcd = ep->pcd; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes); + + if (GET_CORE_IF(pcd)->dma_enable) { + dma_free_coherent (NULL, bytes, buf, dma); + } + else { + kfree(buf); + } +} + + +/** + * This function is used to submit an I/O Request to an EP. + * + * - When the request completes the request's completion callback + * is called to return the request to the driver. + * - An EP, except control EPs, may have multiple requests + * pending. + * - Once submitted the request cannot be examined or modified. + * - Each request is turned into one or more packets. + * - A BULK EP can queue any amount of data; the transfer is + * packetized. + * - Zero length Packets are specified with the request 'zero' + * flag. + */ +static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep, + struct usb_request *usb_req, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif + ) +{ + int prevented = 0; + dwc_otg_pcd_request_t *req; + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd; + unsigned long flags = 0; + dwc_otg_core_if_t *_core_if; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n", + __func__, usb_ep, usb_req, gfp_flags); + + req = container_of(usb_req, dwc_otg_pcd_request_t, req); + if (!usb_req || !usb_req->complete || !usb_req->buf || + !list_empty(&req->queue)) { + DWC_WARN("%s, bad params\n", __func__); + return -EINVAL; + } + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + + DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", + usb_ep->name, usb_req, usb_req->length, usb_req->buf); + + if (!GET_CORE_IF(pcd)->core_params->opt) { + if (ep->dwc_ep.num != 0) { + DWC_ERROR("%s queue req %p, len %d buf %p\n", + usb_ep->name, usb_req, usb_req->length, usb_req->buf); + } + } + + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + + + /************************************************** + New add by kaiker ,for DMA mode bug + ************************************************/ + //by kaiker ,for RT3052 USB OTG device mode + + _core_if = GET_CORE_IF(pcd); + + if (_core_if->dma_enable) + { + usb_req->dma = virt_to_phys((void *)usb_req->buf); + + if(ep->dwc_ep.is_in) + { + if(usb_req->length) + dma_cache_wback_inv((unsigned long)usb_req->buf, usb_req->length + 2); + } + } + + + +#if defined(DEBUG) & defined(VERBOSE) + dump_msg(usb_req->buf, usb_req->length); +#endif + + usb_req->status = -EINPROGRESS; + usb_req->actual = 0; + + /* + * For EP0 IN without premature status, zlp is required? + */ + if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { + DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name); + //_req->zero = 1; + } + + /* Start the transfer */ + if (list_empty(&ep->queue) && !ep->stopped) { + /* EP0 Transfer? */ + if (ep->dwc_ep.num == 0) { + switch (pcd->ep0state) { + case EP0_IN_DATA_PHASE: + DWC_DEBUGPL(DBG_PCD, + "%s ep0: EP0_IN_DATA_PHASE\n", + __func__); + break; + + case EP0_OUT_DATA_PHASE: + DWC_DEBUGPL(DBG_PCD, + "%s ep0: EP0_OUT_DATA_PHASE\n", + __func__); + if (pcd->request_config) { + /* Complete STATUS PHASE */ + ep->dwc_ep.is_in = 1; + pcd->ep0state = EP0_IN_STATUS_PHASE; + } + break; + + case EP0_IN_STATUS_PHASE: + DWC_DEBUGPL(DBG_PCD, + "%s ep0: EP0_IN_STATUS_PHASE\n", + __func__); + break; + + default: + DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", + pcd->ep0state); + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return -EL2HLT; + } + ep->dwc_ep.dma_addr = usb_req->dma; + ep->dwc_ep.start_xfer_buff = usb_req->buf; + ep->dwc_ep.xfer_buff = usb_req->buf; + ep->dwc_ep.xfer_len = usb_req->length; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; + + if(usb_req->zero) { + if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0) + && (ep->dwc_ep.xfer_len != 0)) { + ep->dwc_ep.sent_zlp = 1; + } + + } + + dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep); + } + else { + + uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; + + /* Setup and start the Transfer */ + ep->dwc_ep.dma_addr = usb_req->dma; + ep->dwc_ep.start_xfer_buff = usb_req->buf; + ep->dwc_ep.xfer_buff = usb_req->buf; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = usb_req->length; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + + if(max_transfer > MAX_TRANSFER_SIZE) { + ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket); + } else { + ep->dwc_ep.maxxfer = max_transfer; + } + + if(usb_req->zero) { + if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0) + && (ep->dwc_ep.total_len != 0)) { + ep->dwc_ep.sent_zlp = 1; + } + + } + dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep); + } + } + + if ((req != 0) || prevented) { + ++pcd->request_pending; + list_add_tail(&req->queue, &ep->queue); + if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) { + /** @todo NGS Create a function for this. */ + diepmsk_data_t diepmsk = { .d32 = 0}; + diepmsk.b.intktxfemp = 1; + if(&GET_CORE_IF(pcd)->multiproc_int_enable) { + dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num], + 0, diepmsk.d32); + } else { + dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32); + } + } + } + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return 0; +} + +/** + * This function cancels an I/O request from an EP. + */ +static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep, + struct usb_request *usb_req) +{ + dwc_otg_pcd_request_t *req; + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd; + unsigned long flags; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req); + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) { + DWC_WARN("%s, bad argument\n", __func__); + return -EINVAL; + } + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name, + ep->dwc_ep.is_in ? "IN" : "OUT", + usb_req); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) + { + if (&req->req == usb_req) { + break; + } + } + + if (&req->req != usb_req) { + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return -EINVAL; + } + + if (!list_empty(&req->queue)) { + dwc_otg_request_done(ep, req, -ECONNRESET); + } + else { + req = 0; + } + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + + return req ? 0 : -EOPNOTSUPP; +} + +/** + * usb_ep_set_halt stalls an endpoint. + * + * usb_ep_clear_halt clears an endpoint halt and resets its data + * toggle. + * + * Both of these functions are implemented with the same underlying + * function. The behavior depends on the value argument. + * + * @param[in] usb_ep the Endpoint to halt or clear halt. + * @param[in] value + * - 0 means clear_halt. + * - 1 means set_halt, + * - 2 means clear stall lock flag. + * - 3 means set stall lock flag. + */ +static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value) +{ + int retval = 0; + unsigned long flags; + dwc_otg_pcd_ep_t *ep = 0; + + + DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value); + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + + if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) || + ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + if (!list_empty(&ep->queue)) { + DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name); + retval = -EAGAIN; + } + else if (value == 0) { + dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if, + &ep->dwc_ep); + } + else if(value == 1) { + if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) { + dtxfsts_data_t txstatus; + fifosize_data_t txfifosize; + + txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]); + txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts); + + if(txstatus.b.txfspcavail < txfifosize.b.depth) { + DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name); + retval = -EAGAIN; + } + else { + if (ep->dwc_ep.num == 0) { + ep->pcd->ep0state = EP0_STALL; + } + + ep->stopped = 1; + dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, + &ep->dwc_ep); + } + } + else { + if (ep->dwc_ep.num == 0) { + ep->pcd->ep0state = EP0_STALL; + } + + ep->stopped = 1; + dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, + &ep->dwc_ep); + } + } + else if (value == 2) { + ep->dwc_ep.stall_clear_flag = 0; + } + else if (value == 3) { + ep->dwc_ep.stall_clear_flag = 1; + } + + SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags); + return retval; +} + +/** + * This function allocates a DMA Descriptor chain for the Endpoint + * buffer to be used for a transfer to/from the specified endpoint. + */ +dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count) +{ + + return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL); +} + +/** + * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. + */ +void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count) +{ + dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr); +} + +#ifdef DWC_EN_ISOC + +/** + * This function initializes a descriptor chain for Isochronous transfer + * + * @param core_if Programming view of DWC_otg controller. + * @param dwc_ep The EP to start the transfer on. + * + */ +void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) +{ + + dsts_data_t dsts = { .d32 = 0}; + depctl_data_t depctl = { .d32 = 0 }; + volatile uint32_t *addr; + int i, j; + + if(dwc_ep->is_in) + dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; + else + dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; + + + /** Allocate descriptors for double buffering */ + dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2); + if(dwc_ep->desc_addr) { + DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); + return; + } + + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + + /** ISO OUT EP */ + if(dwc_ep->is_in == 0) { + desc_sts_data_t sts = { .d32 =0 }; + dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr; + dma_addr_t dma_ad; + uint32_t data_per_desc; + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[dwc_ep->num]; + int offset; + + addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; + dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma)); + + /** Buffer 0 descriptors setup */ + dma_ad = dwc_ep->dma_addr0; + + sts.b_iso_out.bs = BS_HOST_READY; + sts.b_iso_out.rxsts = 0; + sts.b_iso_out.l = 0; + sts.b_iso_out.sp = 0; + sts.b_iso_out.ioc = 0; + sts.b_iso_out.pid = 0; + sts.b_iso_out.framenum = 0; + + offset = 0; + for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) + { + + for(j = 0; j < dwc_ep->pkt_per_frm; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + offset += data_per_desc; + dma_desc ++; + (uint32_t)dma_ad += data_per_desc; + } + } + + for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + offset += data_per_desc; + dma_desc ++; + (uint32_t)dma_ad += data_per_desc; + } + + sts.b_iso_out.ioc = 1; + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + dma_desc ++; + + /** Buffer 1 descriptors setup */ + sts.b_iso_out.ioc = 0; + dma_ad = dwc_ep->dma_addr1; + + offset = 0; + for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) + { + for(j = 0; j < dwc_ep->pkt_per_frm; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + offset += data_per_desc; + dma_desc ++; + (uint32_t)dma_ad += data_per_desc; + } + } + for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + offset += data_per_desc; + dma_desc ++; + (uint32_t)dma_ad += data_per_desc; + } + + sts.b_iso_out.ioc = 1; + sts.b_iso_out.l = 1; + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + dwc_ep->next_frame = 0; + + /** Write dma_ad into DOEPDMA register */ + dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr); + + } + /** ISO IN EP */ + else { + desc_sts_data_t sts = { .d32 =0 }; + dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr; + dma_addr_t dma_ad; + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[dwc_ep->num]; + unsigned int frmnumber; + fifosize_data_t txfifosize,rxfifosize; + + txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts); + rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz); + + + addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; + + dma_ad = dwc_ep->dma_addr0; + + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + + sts.b_iso_in.bs = BS_HOST_READY; + sts.b_iso_in.txsts = 0; + sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0; + sts.b_iso_in.ioc = 0; + sts.b_iso_in.pid = dwc_ep->pkt_per_frm; + + + frmnumber = dwc_ep->next_frame; + + sts.b_iso_in.framenum = frmnumber; + sts.b_iso_in.txbytes = dwc_ep->data_per_frame; + sts.b_iso_in.l = 0; + + /** Buffer 0 descriptors setup */ + for(i = 0; i < dwc_ep->desc_cnt - 1; i++) + { + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + dma_desc ++; + + (uint32_t)dma_ad += dwc_ep->data_per_frame; + sts.b_iso_in.framenum += dwc_ep->bInterval; + } + + sts.b_iso_in.ioc = 1; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + ++dma_desc; + + /** Buffer 1 descriptors setup */ + sts.b_iso_in.ioc = 0; + dma_ad = dwc_ep->dma_addr1; + + for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) + { + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + dma_desc ++; + + (uint32_t)dma_ad += dwc_ep->data_per_frame; + sts.b_iso_in.framenum += dwc_ep->bInterval; + + sts.b_iso_in.ioc = 0; + } + sts.b_iso_in.ioc = 1; + sts.b_iso_in.l = 1; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; + + /** Write dma_ad into diepdma register */ + dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr); + } + /** Enable endpoint, clear nak */ + depctl.d32 = 0; + depctl.b.epena = 1; + depctl.b.usbactep = 1; + depctl.b.cnak = 1; + + dwc_modify_reg32(addr, depctl.d32,depctl.d32); + depctl.d32 = dwc_read_reg32(addr); +} + +/** + * This function initializes a descriptor chain for Isochronous transfer + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ + +void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl = { .d32 = 0 }; + volatile uint32_t *addr; + + + if(ep->is_in) { + addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; + } else { + addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; + } + + + if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) { + return; + } else { + deptsiz_data_t deptsiz = { .d32 = 0 }; + + ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; + ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) / + ep->maxpacket; + ep->xfer_count = 0; + ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; + ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; + + if(ep->is_in) { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.mc = ep->pkt_per_frm; + deptsiz.b.xfersize = ep->xfer_len; + deptsiz.b.pktcnt = + (ep->xfer_len - 1 + ep->maxpacket) / + ep->maxpacket; + dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32); + + /* Write the DMA register */ + dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr); + + } else { + deptsiz.b.pktcnt = + (ep->xfer_len + (ep->maxpacket - 1)) / + ep->maxpacket; + deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; + + dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); + + /* Write the DMA register */ + dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr); + + } + /** Enable endpoint, clear nak */ + depctl.d32 = 0; + dwc_modify_reg32(addr, depctl.d32,depctl.d32); + + depctl.b.epena = 1; + depctl.b.cnak = 1; + + dwc_modify_reg32(addr, depctl.d32,depctl.d32); + } +} + + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + */ + +void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + if(core_if->dma_enable) { + if(core_if->dma_desc_enable) { + if(ep->is_in) { + ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; + } else { + ep->desc_cnt = ep->pkt_cnt; + } + dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); + } else { + if(core_if->pti_enh_enable) { + dwc_otg_iso_ep_start_buf_transfer(core_if, ep); + } else { + ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; + ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; + dwc_otg_iso_ep_start_frm_transfer(core_if, ep); + } + } + } else { + ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; + ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; + dwc_otg_iso_ep_start_frm_transfer(core_if, ep); + } +} + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + */ + +void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl = { .d32 = 0 }; + volatile uint32_t *addr; + + if(ep->is_in == 1) { + addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; + } + else { + addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; + } + + /* disable the ep */ + depctl.d32 = dwc_read_reg32(addr); + + depctl.b.epdis = 1; + depctl.b.snak = 1; + + dwc_write_reg32(addr, depctl.d32); + + if(core_if->dma_desc_enable && + ep->iso_desc_addr && ep->iso_dma_desc_addr) { + dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2); + } + + /* reset varibales */ + ep->dma_addr0 = 0; + ep->dma_addr1 = 0; + ep->xfer_buff0 = 0; + ep->xfer_buff1 = 0; + ep->data_per_frame = 0; + ep->data_pattern_frame = 0; + ep->sync_frame = 0; + ep->buf_proc_intrvl = 0; + ep->bInterval = 0; + ep->proc_buf_num = 0; + ep->pkt_per_frm = 0; + ep->pkt_per_frm = 0; + ep->desc_cnt = 0; + ep->iso_desc_addr = 0; + ep->iso_dma_desc_addr = 0; +} + + +/** + * This function is used to submit an ISOC Transfer Request to an EP. + * + * - Every time a sync period completes the request's completion callback + * is called to provide data to the gadget driver. + * - Once submitted the request cannot be modified. + * - Each request is turned into periodic data packets untill ISO + * Transfer is stopped.. + */ +static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif +) +{ + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd; + dwc_ep_t *dwc_ep; + unsigned long flags = 0; + int32_t frm_data; + dwc_otg_core_if_t *core_if; + dcfg_data_t dcfg; + dsts_data_t dsts; + + + if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { + DWC_WARN("%s, bad params\n", __func__); + return -EINVAL; + } + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + + if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + + pcd = ep->pcd; + core_if = GET_CORE_IF(pcd); + + dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); + + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + + dwc_ep = &ep->dwc_ep; + + if(ep->iso_req) { + DWC_WARN("%s, iso request in progress\n", __func__); + } + req->status = -EINPROGRESS; + + dwc_ep->dma_addr0 = req->dma0; + dwc_ep->dma_addr1 = req->dma1; + + dwc_ep->xfer_buff0 = req->buf0; + dwc_ep->xfer_buff1 = req->buf1; + + ep->iso_req = req; + + dwc_ep->data_per_frame = req->data_per_frame; + + /** @todo - pattern data support is to be implemented in the future */ + dwc_ep->data_pattern_frame = req->data_pattern_frame; + dwc_ep->sync_frame = req->sync_frame; + + dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl; + + dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); + + dwc_ep->proc_buf_num = 0; + + dwc_ep->pkt_per_frm = 0; + frm_data = ep->dwc_ep.data_per_frame; + while(frm_data > 0) { + dwc_ep->pkt_per_frm++; + frm_data -= ep->dwc_ep.maxpacket; + } + + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + + if(req->flags & USB_REQ_ISO_ASAP) { + dwc_ep->next_frame = dsts.b.soffn + 1; + if(dwc_ep->bInterval != 1){ + dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval); + } + } else { + dwc_ep->next_frame = req->start_frame; + } + + + if(!core_if->pti_enh_enable) { + dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; + } else { + dwc_ep->pkt_cnt = + (dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) + - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; + } + + if(core_if->dma_desc_enable) { + dwc_ep->desc_cnt = + dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; + } + + dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL); + if(!dwc_ep->pkt_info) { + return -ENOMEM; + } + if(core_if->pti_enh_enable) { + memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); + } + + dwc_ep->cur_pkt = 0; + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + + dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); + + return 0; +} + +/** + * This function stops ISO EP Periodic Data Transfer. + */ +static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) +{ + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd; + dwc_ep_t *dwc_ep; + unsigned long flags; + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + + if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + + pcd = ep->pcd; + + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + dwc_ep = &ep->dwc_ep; + + dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); + + kfree(dwc_ep->pkt_info); + + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + + if(ep->iso_req != req) { + return -EINVAL; + } + + req->status = -ECONNRESET; + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + + + ep->iso_req = 0; + + return 0; +} + +/** + * This function is used for perodical data exchnage between PCD and gadget drivers. + * for Isochronous EPs + * + * - Every time a sync period completes this function is called to + * perform data exchange between PCD and gadget + */ +void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req) +{ + int i; + struct usb_gadget_iso_packet_descriptor *iso_packet; + dwc_ep_t *dwc_ep; + + dwc_ep = &ep->dwc_ep; + + if(ep->iso_req->status == -ECONNRESET) { + DWC_PRINT("Device has already disconnected\n"); + /*Device has been disconnected*/ + return; + } + + if(dwc_ep->proc_buf_num != 0) { + iso_packet = ep->iso_req->iso_packet_desc0; + } + + else { + iso_packet = ep->iso_req->iso_packet_desc1; + } + + /* Fill in ISOC packets descriptors & pass to gadget driver*/ + + for(i = 0; i < dwc_ep->pkt_cnt; ++i) { + iso_packet[i].status = dwc_ep->pkt_info[i].status; + iso_packet[i].offset = dwc_ep->pkt_info[i].offset; + iso_packet[i].actual_length = dwc_ep->pkt_info[i].length; + dwc_ep->pkt_info[i].status = 0; + dwc_ep->pkt_info[i].offset = 0; + dwc_ep->pkt_info[i].length = 0; + } + + /* Call callback function to process data buffer */ + ep->iso_req->status = 0;/* success */ + + SPIN_UNLOCK(&ep->pcd->lock); + ep->iso_req->process_buffer(&ep->ep, ep->iso_req); + SPIN_LOCK(&ep->pcd->lock); +} + + +static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif +) +{ + struct usb_iso_request *pReq = NULL; + uint32_t req_size; + + + req_size = sizeof(struct usb_iso_request); + req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); + + + pReq = kmalloc(req_size, gfp_flags); + if (!pReq) { + DWC_WARN("%s, can't allocate Iso Request\n", __func__); + return 0; + } + pReq->iso_packet_desc0 = (void*) (pReq + 1); + + pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; + + return pReq; +} + +static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) +{ + kfree(req); +} + +static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = +{ + .ep_ops = + { + .enable = dwc_otg_pcd_ep_enable, + .disable = dwc_otg_pcd_ep_disable, + + .alloc_request = dwc_otg_pcd_alloc_request, + .free_request = dwc_otg_pcd_free_request, + + .alloc_buffer = dwc_otg_pcd_alloc_buffer, + .free_buffer = dwc_otg_pcd_free_buffer, + + .queue = dwc_otg_pcd_ep_queue, + .dequeue = dwc_otg_pcd_ep_dequeue, + + .set_halt = dwc_otg_pcd_ep_set_halt, + .fifo_status = 0, + .fifo_flush = 0, + }, + .iso_ep_start = dwc_otg_pcd_iso_ep_start, + .iso_ep_stop = dwc_otg_pcd_iso_ep_stop, + .alloc_iso_request = dwc_otg_pcd_alloc_iso_request, + .free_iso_request = dwc_otg_pcd_free_iso_request, +}; + +#else + + +static struct usb_ep_ops dwc_otg_pcd_ep_ops = +{ + .enable = dwc_otg_pcd_ep_enable, + .disable = dwc_otg_pcd_ep_disable, + + .alloc_request = dwc_otg_pcd_alloc_request, + .free_request = dwc_otg_pcd_free_request, + + .alloc_buffer = dwc_otg_pcd_alloc_buffer, + .free_buffer = dwc_otg_pcd_free_buffer, + + .queue = dwc_otg_pcd_ep_queue, + .dequeue = dwc_otg_pcd_ep_dequeue, + + .set_halt = dwc_otg_pcd_ep_set_halt, + .fifo_status = 0, + .fifo_flush = 0, + + +}; + +#endif /* DWC_EN_ISOC */ +/* Gadget Operations */ +/** + * The following gadget operations will be implemented in the DWC_otg + * PCD. Functions in the API that are not described below are not + * implemented. + * + * The Gadget API provides wrapper functions for each of the function + * pointers defined in usb_gadget_ops. The Gadget Driver calls the + * wrapper function, which then calls the underlying PCD function. The + * following sections are named according to the wrapper functions + * (except for ioctl, which doesn't have a wrapper function). Within + * each section, the corresponding DWC_otg PCD function name is + * specified. + * + */ + +/** + *Gets the USB Frame number of the last SOF. + */ +static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget) +{ + dwc_otg_pcd_t *pcd; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget); + + if (gadget == 0) { + return -ENODEV; + } + else { + pcd = container_of(gadget, dwc_otg_pcd_t, gadget); + dwc_otg_get_frame_number(GET_CORE_IF(pcd)); + } + + return 0; +} + +void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd) +{ + uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl); + gotgctl_data_t mem; + gotgctl_data_t val; + + val.d32 = dwc_read_reg32(addr); + if (val.b.sesreq) { + DWC_ERROR("Session Request Already active!\n"); + return; + } + + DWC_NOTICE("Session Request Initated\n"); + mem.d32 = dwc_read_reg32(addr); + mem.b.sesreq = 1; + dwc_write_reg32(addr, mem.d32); + + /* Start the SRP timer */ + dwc_otg_pcd_start_srp_timer(pcd); + return; +} + +void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set) +{ + dctl_data_t dctl = {.d32=0}; + volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl); + + if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { + if (pcd->remote_wakeup_enable) { + if (set) { + dctl.b.rmtwkupsig = 1; + dwc_modify_reg32(addr, 0, dctl.d32); + DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); + mdelay(1); + dwc_modify_reg32(addr, dctl.d32, 0); + DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); + } + else { + } + } + else { + DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); + } + } + return; +} + +/** + * Initiates Session Request Protocol (SRP) to wakeup the host if no + * session is in progress. If a session is already in progress, but + * the device is suspended, remote wakeup signaling is started. + * + */ +static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget) +{ + unsigned long flags; + dwc_otg_pcd_t *pcd; + dsts_data_t dsts; + gotgctl_data_t gotgctl; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget); + + if (gadget == 0) { + return -ENODEV; + } + else { + pcd = container_of(gadget, dwc_otg_pcd_t, gadget); + } + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + + /* + * This function starts the Protocol if no session is in progress. If + * a session is already in progress, but the device is suspended, + * remote wakeup signaling is started. + */ + + /* Check if valid session */ + gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); + if (gotgctl.b.bsesvld) { + /* Check if suspend state */ + dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts)); + if (dsts.b.suspsts) { + dwc_otg_pcd_remote_wakeup(pcd, 1); + } + } + else { + dwc_otg_pcd_initiate_srp(pcd); + } + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return 0; +} + +static const struct usb_gadget_ops dwc_otg_pcd_ops = +{ + .get_frame = dwc_otg_pcd_get_frame, + .wakeup = dwc_otg_pcd_wakeup, + // current versions must always be self-powered +}; + +/** + * This function updates the otg values in the gadget structure. + */ +void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset) +{ + + if (!pcd->gadget.is_otg) + return; + + if (reset) { + pcd->b_hnp_enable = 0; + pcd->a_hnp_support = 0; + pcd->a_alt_hnp_support = 0; + } + + pcd->gadget.b_hnp_enable = pcd->b_hnp_enable; + pcd->gadget.a_hnp_support = pcd->a_hnp_support; + pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support; +} + +/** + * This function is the top level PCD interrupt handler. + */ +static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) + , struct pt_regs *r +#endif + ) +{ + dwc_otg_pcd_t *pcd = dev; + int32_t retval = IRQ_NONE; + + retval = dwc_otg_pcd_handle_intr(pcd); + return IRQ_RETVAL(retval); +} + +/** + * PCD Callback function for initializing the PCD when switching to + * device mode. + * + * @param p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_start_cb(void *p) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; + + /* + * Initialized the Core for Device mode. + */ + if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { + dwc_otg_core_dev_init(GET_CORE_IF(pcd)); + } + return 1; +} + +/** + * PCD Callback function for stopping the PCD when switching to Host + * mode. + * + * @param p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_stop_cb(void *p) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; + extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd); + + dwc_otg_pcd_stop(pcd); + return 1; +} + + +/** + * PCD Callback function for notifying the PCD when resuming from + * suspend. + * + * @param p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_suspend_cb(void *p) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; + + if (pcd->driver && pcd->driver->resume) { + SPIN_UNLOCK(&pcd->lock); + pcd->driver->suspend(&pcd->gadget); + SPIN_LOCK(&pcd->lock); + } + + return 1; +} + + +/** + * PCD Callback function for notifying the PCD when resuming from + * suspend. + * + * @param p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_resume_cb(void *p) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; + + if (pcd->driver && pcd->driver->resume) { + SPIN_UNLOCK(&pcd->lock); + pcd->driver->resume(&pcd->gadget); + SPIN_LOCK(&pcd->lock); + } + + /* Stop the SRP timeout timer. */ + if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) || + (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { + if (GET_CORE_IF(pcd)->srp_timer_started) { + GET_CORE_IF(pcd)->srp_timer_started = 0; + del_timer(&pcd->srp_timer); + } + } + return 1; +} + + +/** + * PCD Callback structure for handling mode switching. + */ +static dwc_otg_cil_callbacks_t pcd_callbacks = +{ + .start = dwc_otg_pcd_start_cb, + .stop = dwc_otg_pcd_stop_cb, + .suspend = dwc_otg_pcd_suspend_cb, + .resume_wakeup = dwc_otg_pcd_resume_cb, + .p = 0, /* Set at registration */ +}; + +/** + * This function is called when the SRP timer expires. The SRP should + * complete within 6 seconds. + */ +static void srp_timeout(unsigned long ptr) +{ + gotgctl_data_t gotgctl; + dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr; + volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; + + gotgctl.d32 = dwc_read_reg32(addr); + + core_if->srp_timer_started = 0; + + if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && + (core_if->core_params->i2c_enable)) { + DWC_PRINT("SRP Timeout\n"); + + if ((core_if->srp_success) && + (gotgctl.b.bsesvld)) { + if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { + core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); + } + + /* Clear Session Request */ + gotgctl.d32 = 0; + gotgctl.b.sesreq = 1; + dwc_modify_reg32(&core_if->core_global_regs->gotgctl, + gotgctl.d32, 0); + + core_if->srp_success = 0; + } + else { + DWC_ERROR("Device not connected/responding\n"); + gotgctl.b.sesreq = 0; + dwc_write_reg32(addr, gotgctl.d32); + } + } + else if (gotgctl.b.sesreq) { + DWC_PRINT("SRP Timeout\n"); + + DWC_ERROR("Device not connected/responding\n"); + gotgctl.b.sesreq = 0; + dwc_write_reg32(addr, gotgctl.d32); + } + else { + DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32); + } +} + +/** + * Start the SRP timer to detect when the SRP does not complete within + * 6 seconds. + * + * @param pcd the pcd structure. + */ +void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd) +{ + struct timer_list *srp_timer = &pcd->srp_timer; + GET_CORE_IF(pcd)->srp_timer_started = 1; + init_timer(srp_timer); + srp_timer->function = srp_timeout; + srp_timer->data = (unsigned long)GET_CORE_IF(pcd); + srp_timer->expires = jiffies + (HZ*6); + add_timer(srp_timer); +} + +/** + * Tasklet + * + */ +extern void start_next_request(dwc_otg_pcd_ep_t *ep); + +static void start_xfer_tasklet_func (unsigned long data) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data; + dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if; + + int i; + depctl_data_t diepctl; + + DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); + + diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl); + + if (pcd->ep0.queue_sof) { + pcd->ep0.queue_sof = 0; + start_next_request (&pcd->ep0); + // break; + } + + for (i=0; i<core_if->dev_if->num_in_eps; i++) + { + depctl_data_t diepctl; + diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl); + + if (pcd->in_ep[i].queue_sof) { + pcd->in_ep[i].queue_sof = 0; + start_next_request (&pcd->in_ep[i]); + // break; + } + } + + return; +} + + + + + + + +static struct tasklet_struct start_xfer_tasklet = { + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = start_xfer_tasklet_func, + .data = 0, +}; +/** + * This function initialized the pcd Dp structures to there default + * state. + * + * @param pcd the pcd structure. + */ +void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd) +{ + static const char * names[] = + { + + "ep0", + "ep1in", + "ep2in", + "ep3in", + "ep4in", + "ep5in", + "ep6in", + "ep7in", + "ep8in", + "ep9in", + "ep10in", + "ep11in", + "ep12in", + "ep13in", + "ep14in", + "ep15in", + "ep1out", + "ep2out", + "ep3out", + "ep4out", + "ep5out", + "ep6out", + "ep7out", + "ep8out", + "ep9out", + "ep10out", + "ep11out", + "ep12out", + "ep13out", + "ep14out", + "ep15out" + + }; + + int i; + int in_ep_cntr, out_ep_cntr; + uint32_t hwcfg1; + uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; + uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; + dwc_otg_pcd_ep_t *ep; + + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); + + INIT_LIST_HEAD (&pcd->gadget.ep_list); + pcd->gadget.ep0 = &pcd->ep0.ep; + pcd->gadget.speed = USB_SPEED_UNKNOWN; + + INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list); + + /** + * Initialize the EP0 structure. + */ + ep = &pcd->ep0; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.num = 0; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + ep->dwc_ep.desc_addr = 0; + ep->dwc_ep.dma_desc_addr = 0; + + + /* Init the usb_ep structure. */ + ep->ep.name = names[0]; + ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; + + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + + list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); + + INIT_LIST_HEAD (&ep->queue); + /** + * Initialize the EP structures. + */ + in_ep_cntr = 0; + hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; + + for (i = 1; in_ep_cntr < num_in_eps; i++) + { + if((hwcfg1 & 0x1) == 0) { + dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; + in_ep_cntr ++; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.is_in = 1; + ep->dwc_ep.num = i; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + ep->dwc_ep.desc_addr = 0; + ep->dwc_ep.dma_desc_addr = 0; + + /* Init the usb_ep structure. */ + ep->ep.name = names[i]; + ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; + + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + + list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); + + INIT_LIST_HEAD (&ep->queue); + } + hwcfg1 >>= 2; + } + + out_ep_cntr = 0; + hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; + + for (i = 1; out_ep_cntr < num_out_eps; i++) + { + if((hwcfg1 & 0x1) == 0) { + dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; + out_ep_cntr++; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.is_in = 0; + ep->dwc_ep.num = i; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + + /* Init the usb_ep structure. */ + ep->ep.name = names[15 + i]; + ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + + list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); + + INIT_LIST_HEAD (&ep->queue); + } + hwcfg1 >>= 2; + } + + /* remove ep0 from the list. There is a ep0 pointer.*/ + list_del_init (&pcd->ep0.ep.ep_list); + + pcd->ep0state = EP0_DISCONNECT; + pcd->ep0.ep.maxpacket = MAX_EP0_SIZE; + pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; + pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; +} + +/** + * This function releases the Gadget device. + * required by device_unregister(). + * + * @todo Should this do something? Should it free the PCD? + */ +static void dwc_otg_pcd_gadget_release(struct device *dev) +{ + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev); +} + + + +/** + * This function initialized the PCD portion of the driver. + * + */ + +int dwc_otg_pcd_init(struct device *dev) +{ + static char pcd_name[] = "dwc_otg_pcd"; + dwc_otg_pcd_t *pcd; + dwc_otg_core_if_t* core_if; + dwc_otg_dev_if_t* dev_if; + dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); + int retval = 0; + + + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, dev); + /* + * Allocate PCD structure + */ + pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL); + + if (pcd == 0) { + return -ENOMEM; + } + + memset(pcd, 0, sizeof(dwc_otg_pcd_t)); + spin_lock_init(&pcd->lock); + + otg_dev->pcd = pcd; + s_pcd = pcd; + pcd->gadget.name = pcd_name; + strcpy(pcd->gadget.dev.bus_id, "gadget"); + + pcd->otg_dev = dev_get_drvdata(dev); + + pcd->gadget.dev.parent = dev; + pcd->gadget.dev.release = dwc_otg_pcd_gadget_release; + pcd->gadget.ops = &dwc_otg_pcd_ops; + + core_if = GET_CORE_IF(pcd); + dev_if = core_if->dev_if; + + if(core_if->hwcfg4.b.ded_fifo_en) { + DWC_PRINT("Dedicated Tx FIFOs mode\n"); + } + else { + DWC_PRINT("Shared Tx FIFO mode\n"); + } + + /* If the module is set to FS or if the PHY_TYPE is FS then the gadget + * should not report as dual-speed capable. replace the following line + * with the block of code below it once the software is debugged for + * this. If is_dualspeed = 0 then the gadget driver should not report + * a device qualifier descriptor when queried. */ + if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) || + ((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) && + (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) && + (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) { + pcd->gadget.is_dualspeed = 0; + } + else { + pcd->gadget.is_dualspeed = 1; + } + + if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) || + (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) || + (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || + (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { + pcd->gadget.is_otg = 0; + } + else { + pcd->gadget.is_otg = 1; + } + + + pcd->driver = 0; + /* Register the gadget device */ + retval = device_register(&pcd->gadget.dev); + if (retval != 0) { + kfree (pcd); + return retval; + } + + + /* + * Initialized the Core for Device mode. + */ + if (dwc_otg_is_device_mode(core_if)) { + dwc_otg_core_dev_init(core_if); + } + + /* + * Initialize EP structures + */ + dwc_otg_pcd_reinit(pcd); + + /* + * Register the PCD Callbacks. + */ + dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks, + pcd); + /* + * Setup interupt handler + */ + DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq); + retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq, + SA_SHIRQ, pcd->gadget.name, pcd); + if (retval != 0) { + DWC_ERROR("request of irq%d failed\n", otg_dev->irq); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -EBUSY; + } + + /* + * Initialize the DMA buffer for SETUP packets + */ + if (GET_CORE_IF(pcd)->dma_enable) { + pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0); + if (pcd->setup_pkt == 0) { + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -ENOMEM; + } + + pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0); + if (pcd->status_buf == 0) { + dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle); + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -ENOMEM; + } + + if (GET_CORE_IF(pcd)->dma_desc_enable) { + dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1); + dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1); + dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1); + dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1); + + if(dev_if->setup_desc_addr[0] == 0 + || dev_if->setup_desc_addr[1] == 0 + || dev_if->in_desc_addr == 0 + || dev_if->out_desc_addr == 0 ) { + + if(dev_if->out_desc_addr) + dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1); + if(dev_if->in_desc_addr) + dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1); + if(dev_if->setup_desc_addr[1]) + dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1); + if(dev_if->setup_desc_addr[0]) + dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1); + + + dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle); + dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle); + + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + + return -ENOMEM; + } + } + } + else { + pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL); + if (pcd->setup_pkt == 0) { + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -ENOMEM; + } + + pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL); + if (pcd->status_buf == 0) { + kfree(pcd->setup_pkt); + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -ENOMEM; + } + } + + + /* Initialize tasklet */ + start_xfer_tasklet.data = (unsigned long)pcd; + pcd->start_xfer_tasklet = &start_xfer_tasklet; + + return 0; +} + +/** + * Cleanup the PCD. + */ +void dwc_otg_pcd_remove(struct device *dev) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); + dwc_otg_pcd_t *pcd = otg_dev->pcd; + dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if; + + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); + + /* + * Free the IRQ + */ + free_irq(otg_dev->irq, pcd); + + /* start with the driver above us */ + if (pcd->driver) { + /* should have been done already by driver model core */ + DWC_WARN("driver '%s' is still registered\n", + pcd->driver->driver.name); + usb_gadget_unregister_driver(pcd->driver); + } + device_unregister(&pcd->gadget.dev); + + if (GET_CORE_IF(pcd)->dma_enable) { + dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle); + dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle); + if (GET_CORE_IF(pcd)->dma_desc_enable) { + dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1); + dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1); + dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1); + dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1); + } + } + else { + kfree (pcd->setup_pkt); + kfree (pcd->status_buf); + } + + kfree(pcd); + otg_dev->pcd = 0; +} + +/** + * This function registers a gadget driver with the PCD. + * + * When a driver is successfully registered, it will receive control + * requests including set_configuration(), which enables non-control + * requests. then usb traffic follows until a disconnect is reported. + * then a host may connect again, or the driver might get unbound. + * + * @param driver The driver being registered + */ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + int retval; + + DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name); + + if (!driver || driver->speed == USB_SPEED_UNKNOWN || + !driver->bind || + !driver->unbind || + !driver->disconnect || + !driver->setup) { + DWC_DEBUGPL(DBG_PCDV,"EINVAL\n"); + return -EINVAL; + } + if (s_pcd == 0) { + DWC_DEBUGPL(DBG_PCDV,"ENODEV\n"); + return -ENODEV; + } + if (s_pcd->driver != 0) { + DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver); + return -EBUSY; + } + + /* hook up the driver */ + s_pcd->driver = driver; + s_pcd->gadget.dev.driver = &driver->driver; + + DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name); + retval = driver->bind(&s_pcd->gadget); + if (retval) { + DWC_ERROR("bind to driver %s --> error %d\n", + driver->driver.name, retval); + s_pcd->driver = 0; + s_pcd->gadget.dev.driver = 0; + return retval; + } + DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n", + driver->driver.name); + return 0; +} + +EXPORT_SYMBOL(usb_gadget_register_driver); + +/** + * This function unregisters a gadget driver + * + * @param driver The driver being unregistered + */ +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver); + + if (s_pcd == 0) { + DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__, + -ENODEV); + return -ENODEV; + } + if (driver == 0 || driver != s_pcd->driver) { + DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__, + -EINVAL); + return -EINVAL; + } + + driver->unbind(&s_pcd->gadget); + s_pcd->driver = 0; + + DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", + driver->driver.name); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + +#endif /* DWC_HOST_ONLY */ |