diff options
author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-08-15 14:11:55 +0000 |
---|---|---|
committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2011-08-15 14:11:55 +0000 |
commit | a6ff6c1f36b886b61a08ac89996ee15340e6fc64 (patch) | |
tree | 23cf42f4b229a588b1a018b63afebc6df3b55a83 /target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_cil.h | |
parent | bf5f735641b53a1e47871f8aa04d2956a427c3bc (diff) |
ramips: rt305x: add dwc_otg driver
Based on a patch by Layne Edwards <ledwards@astrumtech.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27997 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_cil.h')
-rw-r--r-- | target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_cil.h | 1098 |
1 files changed, 1098 insertions, 0 deletions
diff --git a/target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_cil.h b/target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_cil.h new file mode 100644 index 000000000..95079920a --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/dwc_otg/dwc_otg_cil.h @@ -0,0 +1,1098 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1099526 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_CIL_H__) +#define __DWC_CIL_H__ + +#include <linux/workqueue.h> +#include <linux/version.h> +#include <asm/param.h> + +#include "linux/dwc_otg_plat.h" +#include "dwc_otg_regs.h" +#ifdef DEBUG +#include "linux/timer.h" +#endif + +/** + * @file + * This file contains the interface to the Core Interface Layer. + */ + + +/** Macros defined for DWC OTG HW Release verison */ +#define OTG_CORE_REV_2_00 0x4F542000 +#define OTG_CORE_REV_2_60a 0x4F54260A +#define OTG_CORE_REV_2_71a 0x4F54271A +#define OTG_CORE_REV_2_72a 0x4F54272A + +/** +*/ +typedef struct iso_pkt_info +{ + uint32_t offset; + uint32_t length; + int32_t status; +} iso_pkt_info_t; +/** + * The <code>dwc_ep</code> structure represents the state of a single + * endpoint when acting in device mode. It contains the data items + * needed for an endpoint to be activated and transfer packets. + */ +typedef struct dwc_ep +{ + /** EP number used for register address lookup */ + uint8_t num; + /** EP direction 0 = OUT */ + unsigned is_in : 1; + /** EP active. */ + unsigned active : 1; + + /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO + If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/ + unsigned tx_fifo_num : 4; + /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ + unsigned type : 2; +#define DWC_OTG_EP_TYPE_CONTROL 0 +#define DWC_OTG_EP_TYPE_ISOC 1 +#define DWC_OTG_EP_TYPE_BULK 2 +#define DWC_OTG_EP_TYPE_INTR 3 + + /** DATA start PID for INTR and BULK EP */ + unsigned data_pid_start : 1; + /** Frame (even/odd) for ISOC EP */ + unsigned even_odd_frame : 1; + /** Max Packet bytes */ + unsigned maxpacket : 11; + + /** Max Transfer size */ + unsigned maxxfer : 16; + + /** @name Transfer state */ + /** @{ */ + + /** + * Pointer to the beginning of the transfer buffer -- do not modify + * during transfer. + */ + + uint32_t dma_addr; + + uint32_t dma_desc_addr; + dwc_otg_dma_desc_t* desc_addr; + + + uint8_t *start_xfer_buff; + /** pointer to the transfer buffer */ + uint8_t *xfer_buff; + /** Number of bytes to transfer */ + unsigned xfer_len : 19; + /** Number of bytes transferred. */ + unsigned xfer_count : 19; + /** Sent ZLP */ + unsigned sent_zlp : 1; + /** Total len for control transfer */ + unsigned total_len : 19; + + /** stall clear flag */ + unsigned stall_clear_flag : 1; + + /** Allocated DMA Desc count */ + uint32_t desc_cnt; + +#ifdef DWC_EN_ISOC + /** + * Variables specific for ISOC EPs + * + */ + /** DMA addresses of ISOC buffers */ + uint32_t dma_addr0; + uint32_t dma_addr1; + + uint32_t iso_dma_desc_addr; + dwc_otg_dma_desc_t* iso_desc_addr; + + /** pointer to the transfer buffers */ + uint8_t *xfer_buff0; + uint8_t *xfer_buff1; + + /** number of ISOC Buffer is processing */ + uint32_t proc_buf_num; + /** Interval of ISOC Buffer processing */ + uint32_t buf_proc_intrvl; + /** Data size for regular frame */ + uint32_t data_per_frame; + + /* todo - pattern data support is to be implemented in the future */ + /** Data size for pattern frame */ + uint32_t data_pattern_frame; + /** Frame number of pattern data */ + uint32_t sync_frame; + + /** bInterval */ + uint32_t bInterval; + /** ISO Packet number per frame */ + uint32_t pkt_per_frm; + /** Next frame num for which will be setup DMA Desc */ + uint32_t next_frame; + /** Number of packets per buffer processing */ + uint32_t pkt_cnt; + /** Info for all isoc packets */ + iso_pkt_info_t *pkt_info; + /** current pkt number */ + uint32_t cur_pkt; + /** current pkt number */ + uint8_t *cur_pkt_addr; + /** current pkt number */ + uint32_t cur_pkt_dma_addr; +#endif //DWC_EN_ISOC +/** @} */ +} dwc_ep_t; + +/* + * Reasons for halting a host channel. + */ +typedef enum dwc_otg_halt_status +{ + DWC_OTG_HC_XFER_NO_HALT_STATUS, + DWC_OTG_HC_XFER_COMPLETE, + DWC_OTG_HC_XFER_URB_COMPLETE, + DWC_OTG_HC_XFER_ACK, + DWC_OTG_HC_XFER_NAK, + DWC_OTG_HC_XFER_NYET, + DWC_OTG_HC_XFER_STALL, + DWC_OTG_HC_XFER_XACT_ERR, + DWC_OTG_HC_XFER_FRAME_OVERRUN, + DWC_OTG_HC_XFER_BABBLE_ERR, + DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, + DWC_OTG_HC_XFER_AHB_ERR, + DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, + DWC_OTG_HC_XFER_URB_DEQUEUE +} dwc_otg_halt_status_e; + +/** + * Host channel descriptor. This structure represents the state of a single + * host channel when acting in host mode. It contains the data items needed to + * transfer packets to an endpoint via a host channel. + */ +typedef struct dwc_hc +{ + /** Host channel number used for register address lookup */ + uint8_t hc_num; + + /** Device to access */ + unsigned dev_addr : 7; + + /** EP to access */ + unsigned ep_num : 4; + + /** EP direction. 0: OUT, 1: IN */ + unsigned ep_is_in : 1; + + /** + * EP speed. + * One of the following values: + * - DWC_OTG_EP_SPEED_LOW + * - DWC_OTG_EP_SPEED_FULL + * - DWC_OTG_EP_SPEED_HIGH + */ + unsigned speed : 2; +#define DWC_OTG_EP_SPEED_LOW 0 +#define DWC_OTG_EP_SPEED_FULL 1 +#define DWC_OTG_EP_SPEED_HIGH 2 + + /** + * Endpoint type. + * One of the following values: + * - DWC_OTG_EP_TYPE_CONTROL: 0 + * - DWC_OTG_EP_TYPE_ISOC: 1 + * - DWC_OTG_EP_TYPE_BULK: 2 + * - DWC_OTG_EP_TYPE_INTR: 3 + */ + unsigned ep_type : 2; + + /** Max packet size in bytes */ + unsigned max_packet : 11; + + /** + * PID for initial transaction. + * 0: DATA0,<br> + * 1: DATA2,<br> + * 2: DATA1,<br> + * 3: MDATA (non-Control EP), + * SETUP (Control EP) + */ + unsigned data_pid_start : 2; +#define DWC_OTG_HC_PID_DATA0 0 +#define DWC_OTG_HC_PID_DATA2 1 +#define DWC_OTG_HC_PID_DATA1 2 +#define DWC_OTG_HC_PID_MDATA 3 +#define DWC_OTG_HC_PID_SETUP 3 + + /** Number of periodic transactions per (micro)frame */ + unsigned multi_count: 2; + + /** @name Transfer State */ + /** @{ */ + + /** Pointer to the current transfer buffer position. */ + uint8_t *xfer_buff; + /** Total number of bytes to transfer. */ + uint32_t xfer_len; + /** Number of bytes transferred so far. */ + uint32_t xfer_count; + /** Packet count at start of transfer.*/ + uint16_t start_pkt_count; + + /** + * Flag to indicate whether the transfer has been started. Set to 1 if + * it has been started, 0 otherwise. + */ + uint8_t xfer_started; + + /** + * Set to 1 to indicate that a PING request should be issued on this + * channel. If 0, process normally. + */ + uint8_t do_ping; + + /** + * Set to 1 to indicate that the error count for this transaction is + * non-zero. Set to 0 if the error count is 0. + */ + uint8_t error_state; + + /** + * Set to 1 to indicate that this channel should be halted the next + * time a request is queued for the channel. This is necessary in + * slave mode if no request queue space is available when an attempt + * is made to halt the channel. + */ + uint8_t halt_on_queue; + + /** + * Set to 1 if the host channel has been halted, but the core is not + * finished flushing queued requests. Otherwise 0. + */ + uint8_t halt_pending; + + /** + * Reason for halting the host channel. + */ + dwc_otg_halt_status_e halt_status; + + /* + * Split settings for the host channel + */ + uint8_t do_split; /**< Enable split for the channel */ + uint8_t complete_split; /**< Enable complete split */ + uint8_t hub_addr; /**< Address of high speed hub */ + + uint8_t port_addr; /**< Port of the low/full speed device */ + /** Split transaction position + * One of the following values: + * - DWC_HCSPLIT_XACTPOS_MID + * - DWC_HCSPLIT_XACTPOS_BEGIN + * - DWC_HCSPLIT_XACTPOS_END + * - DWC_HCSPLIT_XACTPOS_ALL */ + uint8_t xact_pos; + + /** Set when the host channel does a short read. */ + uint8_t short_read; + + /** + * Number of requests issued for this channel since it was assigned to + * the current transfer (not counting PINGs). + */ + uint8_t requests; + + /** + * Queue Head for the transfer being processed by this channel. + */ + struct dwc_otg_qh *qh; + + /** @} */ + + /** Entry in list of host channels. */ + struct list_head hc_list_entry; +} dwc_hc_t; + +/** + * The following parameters may be specified when starting the module. These + * parameters define how the DWC_otg controller should be configured. + * Parameter values are passed to the CIL initialization function + * dwc_otg_cil_init. + */ +typedef struct dwc_otg_core_params +{ + int32_t opt; +#define dwc_param_opt_default 1 + + /** + * Specifies the OTG capabilities. The driver will automatically + * detect the value for this parameter if none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + */ + int32_t otg_cap; +#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 +#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 +#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 +#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE + + /** + * Specifies whether to use slave or DMA mode for accessing the data + * FIFOs. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + */ + int32_t dma_enable; +#define dwc_param_dma_enable_default 1 + + /** + * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data + * FIFOs in device mode. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - address DMA + * 1 - DMA Descriptor(default, if available) + */ + int32_t dma_desc_enable; +#define dwc_param_dma_desc_enable_default 0 + /** The DMA Burst size (applicable only for External DMA + * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) + */ + int32_t dma_burst_size; /* Translate this to GAHBCFG values */ +#define dwc_param_dma_burst_size_default 32 + + /** + * Specifies the maximum speed of operation in host and device mode. + * The actual speed depends on the speed of the attached device and + * the value of phy_type. The actual speed depends on the speed of the + * attached device. + * 0 - High Speed (default) + * 1 - Full Speed + */ + int32_t speed; +#define dwc_param_speed_default 0 +#define DWC_SPEED_PARAM_HIGH 0 +#define DWC_SPEED_PARAM_FULL 1 + + /** Specifies whether low power mode is supported when attached + * to a Full Speed or Low Speed device in host mode. + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + */ + int32_t host_support_fs_ls_low_power; +#define dwc_param_host_support_fs_ls_low_power_default 0 + + /** Specifies the PHY clock rate in low power mode when connected to a + * Low Speed device in host mode. This parameter is applicable only if + * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS + * then defaults to 6 MHZ otherwise 48 MHZ. + * + * 0 - 48 MHz + * 1 - 6 MHz + */ + int32_t host_ls_low_power_phy_clk; +#define dwc_param_host_ls_low_power_phy_clk_default 0 +#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 +#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 + + /** + * 0 - Use cC FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + */ + int32_t enable_dynamic_fifo; +#define dwc_param_enable_dynamic_fifo_default 1 + + /** Total number of 4-byte words in the data FIFO memory. This + * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic + * Tx FIFOs. + * 32 to 32768 (default 8192) + * Note: The total FIFO memory depth in the FPGA configuration is 8192. + */ + int32_t data_fifo_size; +#define dwc_param_data_fifo_size_default 8192 + + /** Number of 4-byte words in the Rx FIFO in device mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1064) + */ + int32_t dev_rx_fifo_size; +#define dwc_param_dev_rx_fifo_size_default 1064 + + /** Number of 4-byte words in the non-periodic Tx FIFO in device mode + * when dynamic FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t dev_nperio_tx_fifo_size; +#define dwc_param_dev_nperio_tx_fifo_size_default 1024 + + /** Number of 4-byte words in each of the periodic Tx FIFOs in device + * mode when dynamic FIFO sizing is enabled. + * 4 to 768 (default 256) + */ + uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; +#define dwc_param_dev_perio_tx_fifo_size_default 256 + + /** Number of 4-byte words in the Rx FIFO in host mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t host_rx_fifo_size; +#define dwc_param_host_rx_fifo_size_default 1024 + + /** Number of 4-byte words in the non-periodic Tx FIFO in host mode + * when Dynamic FIFO sizing is enabled in the core. + * 16 to 32768 (default 1024) + */ + int32_t host_nperio_tx_fifo_size; +#define dwc_param_host_nperio_tx_fifo_size_default 1024 + + /** Number of 4-byte words in the host periodic Tx FIFO when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t host_perio_tx_fifo_size; +#define dwc_param_host_perio_tx_fifo_size_default 1024 + + /** The maximum transfer size supported in bytes. + * 2047 to 65,535 (default 65,535) + */ + int32_t max_transfer_size; +#define dwc_param_max_transfer_size_default 65535 + + /** The maximum number of packets in a transfer. + * 15 to 511 (default 511) + */ + int32_t max_packet_count; +#define dwc_param_max_packet_count_default 511 + + /** The number of host channel registers to use. + * 1 to 16 (default 12) + * Note: The FPGA configuration supports a maximum of 12 host channels. + */ + int32_t host_channels; +#define dwc_param_host_channels_default 12 + + /** The number of endpoints in addition to EP0 available for device + * mode operations. + * 1 to 15 (default 6 IN and OUT) + * Note: The FPGA configuration supports a maximum of 6 IN and OUT + * endpoints in addition to EP0. + */ + int32_t dev_endpoints; +#define dwc_param_dev_endpoints_default 6 + + /** + * Specifies the type of PHY interface to use. By default, the driver + * will automatically detect the phy_type. + * + * 0 - Full Speed PHY + * 1 - UTMI+ (default) + * 2 - ULPI + */ + int32_t phy_type; +#define DWC_PHY_TYPE_PARAM_FS 0 +#define DWC_PHY_TYPE_PARAM_UTMI 1 +#define DWC_PHY_TYPE_PARAM_ULPI 2 +#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI + + /** + * Specifies the UTMI+ Data Width. This parameter is + * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI + * PHY_TYPE, this parameter indicates the data width between + * the MAC and the ULPI Wrapper.) Also, this parameter is + * applicable only if the OTG_HSPHY_WIDTH cC parameter was set + * to "8 and 16 bits", meaning that the core has been + * configured to work at either data path width. + * + * 8 or 16 bits (default 16) + */ + int32_t phy_utmi_width; +#define dwc_param_phy_utmi_width_default 16 + + /** + * Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if PHY_TYPE is + * ULPI. + * + * 0 - single data rate ULPI interface with 8 bit wide data + * bus (default) + * 1 - double data rate ULPI interface with 4 bit wide data + * bus + */ + int32_t phy_ulpi_ddr; +#define dwc_param_phy_ulpi_ddr_default 0 + + /** + * Specifies whether to use the internal or external supply to + * drive the vbus with a ULPI phy. + */ + int32_t phy_ulpi_ext_vbus; +#define DWC_PHY_ULPI_INTERNAL_VBUS 0 +#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 +#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS + + /** + * Specifies whether to use the I2Cinterface for full speed PHY. This + * parameter is only applicable if PHY_TYPE is FS. + * 0 - No (default) + * 1 - Yes + */ + int32_t i2c_enable; +#define dwc_param_i2c_enable_default 0 + + int32_t ulpi_fs_ls; +#define dwc_param_ulpi_fs_ls_default 0 + + int32_t ts_dline; +#define dwc_param_ts_dline_default 0 + + /** + * Specifies whether dedicated transmit FIFOs are + * enabled for non periodic IN endpoints in device mode + * 0 - No + * 1 - Yes + */ + int32_t en_multiple_tx_fifo; +#define dwc_param_en_multiple_tx_fifo_default 1 + + /** Number of 4-byte words in each of the Tx FIFOs in device + * mode when dynamic FIFO sizing is enabled. + * 4 to 768 (default 256) + */ + uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; +#define dwc_param_dev_tx_fifo_size_default 256 + + /** Thresholding enable flag- + * bit 0 - enable non-ISO Tx thresholding + * bit 1 - enable ISO Tx thresholding + * bit 2 - enable Rx thresholding + */ + uint32_t thr_ctl; +#define dwc_param_thr_ctl_default 0 + + /** Thresholding length for Tx + * FIFOs in 32 bit DWORDs + */ + uint32_t tx_thr_length; +#define dwc_param_tx_thr_length_default 64 + + /** Thresholding length for Rx + * FIFOs in 32 bit DWORDs + */ + uint32_t rx_thr_length; +#define dwc_param_rx_thr_length_default 64 + + /** Per Transfer Interrupt + * mode enable flag + * 1 - Enabled + * 0 - Disabled + */ + uint32_t pti_enable; +#define dwc_param_pti_enable_default 0 + + /** Molti Processor Interrupt + * mode enable flag + * 1 - Enabled + * 0 - Disabled + */ + uint32_t mpi_enable; +#define dwc_param_mpi_enable_default 0 + +} dwc_otg_core_params_t; + +#ifdef DEBUG +struct dwc_otg_core_if; +typedef struct hc_xfer_info +{ + struct dwc_otg_core_if *core_if; + dwc_hc_t *hc; +} hc_xfer_info_t; +#endif + +/** + * The <code>dwc_otg_core_if</code> structure contains information needed to manage + * the DWC_otg controller acting in either host or device mode. It + * represents the programming view of the controller as a whole. + */ +typedef struct dwc_otg_core_if +{ + /** Parameters that define how the core should be configured.*/ + dwc_otg_core_params_t *core_params; + + /** Core Global registers starting at offset 000h. */ + dwc_otg_core_global_regs_t *core_global_regs; + + /** Device-specific information */ + dwc_otg_dev_if_t *dev_if; + /** Host-specific information */ + dwc_otg_host_if_t *host_if; + + /** Value from SNPSID register */ + uint32_t snpsid; + + /* + * Set to 1 if the core PHY interface bits in USBCFG have been + * initialized. + */ + uint8_t phy_init_done; + + /* + * SRP Success flag, set by srp success interrupt in FS I2C mode + */ + uint8_t srp_success; + uint8_t srp_timer_started; + + /* Common configuration information */ + /** Power and Clock Gating Control Register */ + volatile uint32_t *pcgcctl; +#define DWC_OTG_PCGCCTL_OFFSET 0xE00 + + /** Push/pop addresses for endpoints or host channels.*/ + uint32_t *data_fifo[MAX_EPS_CHANNELS]; +#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 +#define DWC_OTG_DATA_FIFO_SIZE 0x1000 + + /** Total RAM for FIFOs (Bytes) */ + uint16_t total_fifo_size; + /** Size of Rx FIFO (Bytes) */ + uint16_t rx_fifo_size; + /** Size of Non-periodic Tx FIFO (Bytes) */ + uint16_t nperio_tx_fifo_size; + + + /** 1 if DMA is enabled, 0 otherwise. */ + uint8_t dma_enable; + + /** 1 if Descriptor DMA mode is enabled, 0 otherwise. */ + uint8_t dma_desc_enable; + + /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ + uint8_t pti_enh_enable; + + /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ + uint8_t multiproc_int_enable; + + /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ + uint8_t en_multiple_tx_fifo; + + /** Set to 1 if multiple packets of a high-bandwidth transfer is in + * process of being queued */ + uint8_t queuing_high_bandwidth; + + /** Hardware Configuration -- stored here for convenience.*/ + hwcfg1_data_t hwcfg1; + hwcfg2_data_t hwcfg2; + hwcfg3_data_t hwcfg3; + hwcfg4_data_t hwcfg4; + + /** Host and Device Configuration -- stored here for convenience.*/ + hcfg_data_t hcfg; + dcfg_data_t dcfg; + + /** The operational State, during transations + * (a_host>>a_peripherial and b_device=>b_host) this may not + * match the core but allows the software to determine + * transitions. + */ + uint8_t op_state; + + /** + * Set to 1 if the HCD needs to be restarted on a session request + * interrupt. This is required if no connector ID status change has + * occurred since the HCD was last disconnected. + */ + uint8_t restart_hcd_on_session_req; + + /** HCD callbacks */ + /** A-Device is a_host */ +#define A_HOST (1) + /** A-Device is a_suspend */ +#define A_SUSPEND (2) + /** A-Device is a_peripherial */ +#define A_PERIPHERAL (3) + /** B-Device is operating as a Peripheral. */ +#define B_PERIPHERAL (4) + /** B-Device is operating as a Host. */ +#define B_HOST (5) + + /** HCD callbacks */ + struct dwc_otg_cil_callbacks *hcd_cb; + /** PCD callbacks */ + struct dwc_otg_cil_callbacks *pcd_cb; + + /** Device mode Periodic Tx FIFO Mask */ + uint32_t p_tx_msk; + /** Device mode Periodic Tx FIFO Mask */ + uint32_t tx_msk; + + /** Workqueue object used for handling several interrupts */ + struct workqueue_struct *wq_otg; + + /** Work object used for handling "Connector ID Status Change" Interrupt */ + struct work_struct w_conn_id; + + /** Work object used for handling "Wakeup Detected" Interrupt */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + struct work_struct w_wkp; +#else + struct delayed_work w_wkp; +#endif + +#ifdef DEBUG + uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; + + hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; + struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS]; + + uint32_t hfnum_7_samples; + uint64_t hfnum_7_frrem_accum; + uint32_t hfnum_0_samples; + uint64_t hfnum_0_frrem_accum; + uint32_t hfnum_other_samples; + uint64_t hfnum_other_frrem_accum; +#endif + + +} dwc_otg_core_if_t; + +/*We must clear S3C24XX_EINTPEND external interrupt register + * because after clearing in this register trigerred IRQ from + * H/W core in kernel interrupt can be occured again before OTG + * handlers clear all IRQ sources of Core registers because of + * timing latencies and Low Level IRQ Type. + */ + +#ifdef CONFIG_MACH_IPMATE +#define S3C2410X_CLEAR_EINTPEND() \ +do { \ + if (!dwc_otg_read_core_intr(core_if)) { \ + __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ + } \ +} while (0) +#else +#define S3C2410X_CLEAR_EINTPEND() do { } while (0) +#endif + +/* + * The following functions are functions for works + * using during handling some interrupts + */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + +extern void w_conn_id_status_change(void *p); +extern void w_wakeup_detected(void *p); + +#else + +extern void w_conn_id_status_change(struct work_struct *p); +extern void w_wakeup_detected(struct work_struct *p); + +#endif + + +/* + * The following functions support initialization of the CIL driver component + * and the DWC_otg controller. + */ +extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr, + dwc_otg_core_params_t *_core_params); +extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if ); +extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if ); + +/** @name Device CIL Functions + * The following functions support managing the DWC_otg controller in device + * mode. + */ +/**@{*/ +extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest); +extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma); +extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if); +#ifdef DWC_EN_ISOC +extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep); +extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep); +#endif //DWC_EN_ISOC +/**@}*/ + +/** @name Host CIL Functions + * The following functions support managing the DWC_otg controller in host + * mode. + */ +/**@{*/ +extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if, + dwc_hc_t *_hc, + dwc_otg_halt_status_e _halt_status); +extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if); + +/** + * This function Reads HPRT0 in preparation to modify. It keeps the + * WC bits 0 so that if they are read as 1, they won't clear when you + * write it back + */ +static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if) +{ + hprt0_data_t hprt0; + hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0); + hprt0.b.prtena = 0; + hprt0.b.prtconndet = 0; + hprt0.b.prtenchng = 0; + hprt0.b.prtovrcurrchng = 0; + return hprt0.d32; +} + +extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if); +/**@}*/ + +/** @name Common CIL Functions + * The following functions support managing the DWC_otg controller in either + * device or host mode. + */ +/**@{*/ + +extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if, + uint8_t *dest, + uint16_t bytes); + +extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if); + +extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, + const int _num ); +extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if ); +extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if ); + +extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count); +extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count); + +/** + * This function returns the Core Interrupt register. + */ +static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) & + dwc_read_reg32(&_core_if->core_global_regs->gintmsk)); +} + +/** + * This function returns the OTG Interrupt register. + */ +static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint)); +} + +/** + * This function reads the Device All Endpoints Interrupt register and + * returns the IN endpoint interrupt bits. + */ +static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if) +{ + uint32_t v; + + if(core_if->multiproc_int_enable) { + v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) & + dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk); + } else { + v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) & + dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk); + } + return (v & 0xffff); + +} + +/** + * This function reads the Device All Endpoints Interrupt register and + * returns the OUT endpoint interrupt bits. + */ +static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if) +{ + uint32_t v; + + if(core_if->multiproc_int_enable) { + v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) & + dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk); + } else { + v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) & + dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk); + } + + return ((v & 0xffff0000) >> 16); +} + +/** + * This function returns the Device IN EP Interrupt register + */ +static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if, + dwc_ep_t *ep) +{ + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + uint32_t v, msk, emp; + + if(core_if->multiproc_int_enable) { + msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]); + emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); + msk |= ((emp >> ep->num) & 0x1) << 7; + v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; + } else { + msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk); + emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); + msk |= ((emp >> ep->num) & 0x1) << 7; + v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; + } + + + return v; +} +/** + * This function returns the Device OUT EP Interrupt register + */ +static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if, + dwc_ep_t *_ep) +{ + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + uint32_t v; + doepmsk_data_t msk = { .d32 = 0 }; + + if(_core_if->multiproc_int_enable) { + msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]); + if(_core_if->pti_enh_enable) { + msk.b.pktdrpsts = 1; + } + v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32; + } else { + msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk); + if(_core_if->pti_enh_enable) { + msk.b.pktdrpsts = 1; + } + v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32; + } + return v; +} + +/** + * This function returns the Host All Channel Interrupt register + */ +static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint)); +} + +static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); +} + + +/** + * This function returns the mode of the operation, host or device. + * + * @return 0 - Device Mode, 1 - Host Mode + */ +static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1); +} + +static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if) +{ + return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); +} +static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if) +{ + return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); +} + +extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if ); + + +/**@}*/ + +/** + * DWC_otg CIL callback structure. This structure allows the HCD and + * PCD to register functions used for starting and stopping the PCD + * and HCD for role change on for a DRD. + */ +typedef struct dwc_otg_cil_callbacks +{ + /** Start function for role change */ + int (*start) (void *_p); + /** Stop Function for role change */ + int (*stop) (void *_p); + /** Disconnect Function for role change */ + int (*disconnect) (void *_p); + /** Resume/Remote wakeup Function */ + int (*resume_wakeup) (void *_p); + /** Suspend function */ + int (*suspend) (void *_p); + /** Session Start (SRP) */ + int (*session_start) (void *_p); + /** Pointer passed to start() and stop() */ + void *p; +} dwc_otg_cil_callbacks_t; + +extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if, + dwc_otg_cil_callbacks_t *_cb, + void *_p); +extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if, + dwc_otg_cil_callbacks_t *_cb, + void *_p); + +#endif + |