[ramips] add the dts files that describe the boards in future

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36168 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 96 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts
new file mode 100644
index 000000000..75f7b5a27
--- /dev/null
+++ b/target/linux/ramips/dts/WHR-G300N.dts
@@ -0,0 +1,96 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "WHR-G300N", "ralink,rt3052-soc";
+	model = "Buffalo WHR-G300N";
+
+	memorydetect {
+		ralink,memory = <0x0 0x200000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		diag {
+			label = "whr-g300n:red:diag";
+			gpios = <&gpio0 7 1>;
+		};
+		router {
+			label = "whr-g300n:green:router";
+			gpios = <&gpio0 9 1>;
+		};
+		security {
+			label = "whr-g300n:amber:security";
+			gpios = <&gpio0 14 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+		aoss {
+			label = "aoss";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x211>;
+		};
+		router-off {
+			label = "router-off";
+			gpios = <&gpio0 11 1>;
+			linux,code = <0x102>;
+		};
+		router-on {
+			label = "router-on";
+			gpios = <&gpio0 8 1>;
+			linux,code = <0x103>;
+		};
+	};
+
+	wmac@10180000 {
+		status = "okay";
+	};
+};