ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router

[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]

Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30645 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 15 insertions, 1 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index b167c520b..26f0d1f0a 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -69,6 +69,9 @@ get_status_led() {
 	rt-n56u)
 		status_led="asus:blue:power"
 		;;
+	sl-r7205)
+		status_led="sl-r7205:green:status"
+		;;
 	v11st-fe)
 		status_led="v11st-fe:green:status"
 		;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 6d90c2597..eb756a5e5 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -60,6 +60,7 @@ case "$FIRMWARE" in
 	omni-emb | \
 	rt-n15 | \
 	rt-n56u | \
+	sl-r7205 | \
 	v11st-fe | \
 	v22rw-2x2 | \
 	w502u | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index 891a1a7b3..d8f3c0cba 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -60,6 +60,9 @@ case $board in
 	nw718)
 		set_usb_led "nw718:amber:usb"
 		;;
+	sl-r7205)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
 	v11st-fe)
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index a36341ca1..2b8c1ab25 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -23,6 +23,7 @@ ramips_setup_interfaces()
 	argus-atp52b | \
 	b2c | \
 	nw718 | \
+	sl-r7205 | \
 	w502u | \
 	wr6202)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
@@ -99,6 +100,7 @@ ramips_setup_macs()
 	f5d8235-v1 | \
 	nw718 | \
 	rt-n15 | \
+	sl-r7205 | \
 	wl-351)
 		lan_mac=$(ramips_get_mac_binary factory 4)
 		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 9f5c02446..66eb6b98a 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -9,9 +9,10 @@ preinit_set_mac_address() {
 
 	case $(ramips_board_name) in
 	bc2 |\
+	esr-9753 |\
 	nw718 |\
 	rt-n56u |\
-	esr-9753)
+	sl-r7205)
 		mac=$(ramips_get_mac_binary factory 4)
 		mac=$(maccalc or "$mac" "02:00:00:00:00:00")
 		ifconfig eth0 hw ether $mac 2>/dev/null
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 07bdf1605..728f525d6 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -104,6 +104,9 @@ ramips_board_name() {
 	*"RT-N56U")
 		name="rt-n56u"
 		;;
+	*"Skyline SL-R7205"*)
+		name="sl-r7205"
+		;;
 	*"Sparklan WCR-150GN")
 		name="wcr-150gn"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2bcfa4b82..a2f351353 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -29,6 +29,7 @@ platform_check_image() {
 	rt-g32-b1 | \
 	rt-n15 | \
 	rt-n56u | \
+	sl-r7205 | \
 	w502u |\
 	wr6202 |\
 	v22rw-2x2 | \