summaryrefslogtreecommitdiffstats
path: root/target/linux/pxa/patches-2.6.21/044-smc911x-fixup.patch
diff options
context:
space:
mode:
authorkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-02-09 00:11:50 +0000
committerkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-02-09 00:11:50 +0000
commitd4db749fd7871921ff4a6aeb6e9631c641851998 (patch)
treea1637f5df5b2c6175a4c8b17f73d0f7808361fa7 /target/linux/pxa/patches-2.6.21/044-smc911x-fixup.patch
parented2d03fdee38a559d628e947cb23ef46a04f16f8 (diff)
[pxa]: upgrade to 2.6.32.7, switch to squashfs, remove broken flag
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19562 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/pxa/patches-2.6.21/044-smc911x-fixup.patch')
-rw-r--r--target/linux/pxa/patches-2.6.21/044-smc911x-fixup.patch371
1 files changed, 0 insertions, 371 deletions
diff --git a/target/linux/pxa/patches-2.6.21/044-smc911x-fixup.patch b/target/linux/pxa/patches-2.6.21/044-smc911x-fixup.patch
deleted file mode 100644
index 7ddfd5fda..000000000
--- a/target/linux/pxa/patches-2.6.21/044-smc911x-fixup.patch
+++ /dev/null
@@ -1,371 +0,0 @@
---- a/drivers/net/smc911x.c
-+++ b/drivers/net/smc911x.c
-@@ -76,6 +76,7 @@ static const char version[] =
- #include <linux/etherdevice.h>
- #include <linux/skbuff.h>
-
-+#include <linux/irq.h>
- #include <asm/io.h>
- #include <asm/irq.h>
-
-@@ -303,14 +304,14 @@ static void smc911x_reset(struct net_dev
- SMC_SET_AFC_CFG(lp->afc_cfg);
-
-
-- /* Set to LED outputs */
-- SMC_SET_GPIO_CFG(0x70070000);
-+ /* Set to LED outputs and configure EEPROM pins as GP outputs */
-+ SMC_SET_GPIO_CFG(GPIO_CFG_LED1_EN_ | GPIO_CFG_LED2_EN_ | 1 << 20);
-
- /*
-- * Deassert IRQ for 1*10us for edge type interrupts
-+ * Deassert IRQ for 22*10us for edge type interrupts
- * and drive IRQ pin push-pull
- */
-- SMC_SET_IRQ_CFG( (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ );
-+ SMC_SET_IRQ_CFG( (22 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ );
-
- /* clear anything saved */
- if (lp->pending_tx_skb != NULL) {
-@@ -413,7 +414,7 @@ static inline void smc911x_drop_pkt(stru
- if (fifo_count <= 4) {
- /* Manually dump the packet data */
- while (fifo_count--)
-- SMC_GET_RX_FIFO();
-+ (void)SMC_GET_RX_FIFO();
- } else {
- /* Fast forward through the bad packet */
- SMC_SET_RX_DP_CTRL(RX_DP_CTRL_FFWD_BUSY_);
-@@ -900,6 +901,7 @@ static void smc911x_phy_powerdown(struct
- unsigned long ioaddr = dev->base_addr;
- unsigned int bmcr;
-
-+ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
- /* Enter Link Disable state */
- SMC_GET_PHY_BMCR(phy, bmcr);
- bmcr |= BMCR_PDOWN;
-@@ -925,6 +927,7 @@ static void smc911x_phy_check_media(stru
-
- if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
- /* duplex state has changed */
-+ DBG(SMC_DEBUG_MISC, "%s: duplex state has changed\n", dev->name);
- SMC_GET_PHY_BMCR(phyaddr, bmcr);
- SMC_GET_MAC_CR(cr);
- if (lp->mii.full_duplex) {
-@@ -960,6 +963,7 @@ static void smc911x_phy_configure(struct
- int my_phy_caps; /* My PHY capabilities */
- int my_ad_caps; /* My Advertised capabilities */
- int status;
-+ int bmcr;
- unsigned long flags;
-
- DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __FUNCTION__);
-@@ -1033,9 +1037,12 @@ static void smc911x_phy_configure(struct
-
- DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps);
- DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps);
-+ DBG(SMC_DEBUG_MISC, "%s: phy advertised readback caps=0x%04x\n", dev->name, status);
-
- /* Restart auto-negotiation process in order to advertise my caps */
-- SMC_SET_PHY_BMCR(phyaddr, BMCR_ANENABLE | BMCR_ANRESTART);
-+ SMC_GET_PHY_BMCR(phyaddr, bmcr);
-+ bmcr |= BMCR_ANENABLE | BMCR_ANRESTART;
-+ SMC_SET_PHY_BMCR(phyaddr, bmcr);
-
- smc911x_phy_check_media(dev, 1);
-
-@@ -1888,6 +1895,39 @@ static int __init smc911x_findirq(unsign
- return probe_irq_off(cookie);
- }
-
-+static inline unsigned int is_gumstix_oui(u8 *addr)
-+{
-+ return (addr[0] == 0x00 && addr[1] == 0x15 && addr[2] == 0xC9);
-+}
-+
-+/**
-+ * gen_serial_ether_addr - Generate software assigned Ethernet address
-+ * based on the system_serial number
-+ * @addr: Pointer to a six-byte array containing the Ethernet address
-+ *
-+ * Generate an Ethernet address (MAC) that is not multicast
-+ * and has the local assigned bit set, keyed on the system_serial
-+ */
-+static inline void gen_serial_ether_addr(u8 *addr)
-+{
-+ static u8 ether_serial_digit = 0;
-+ addr [0] = system_serial_high >> 8;
-+ addr [1] = system_serial_high;
-+ addr [2] = system_serial_low >> 24;
-+ addr [3] = system_serial_low >> 16;
-+ addr [4] = system_serial_low >> 8;
-+ addr [5] = (system_serial_low & 0xc0) | /* top bits are from system serial */
-+ (1 << 4) | /* 2 bits identify interface type 1=ether, 2=usb, 3&4 undef */
-+ ((ether_serial_digit++) & 0x0f); /* 15 possible interfaces of each type */
-+
-+ if(!is_gumstix_oui(addr))
-+ {
-+ addr [0] &= 0xfe; /* clear multicast bit */
-+ addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
-+ }
-+}
-+
-+
- /*
- * Function: smc911x_probe(unsigned long ioaddr)
- *
-@@ -2116,15 +2156,13 @@ static int __init smc911x_probe(struct n
- #endif
- printk("\n");
- if (!is_valid_ether_addr(dev->dev_addr)) {
-- printk("%s: Invalid ethernet MAC address. Please "
-- "set using ifconfig\n", dev->name);
-- } else {
-- /* Print the Ethernet address */
-- printk("%s: Ethernet addr: ", dev->name);
-- for (i = 0; i < 5; i++)
-- printk("%2.2x:", dev->dev_addr[i]);
-- printk("%2.2x\n", dev->dev_addr[5]);
-+ gen_serial_ether_addr(dev->dev_addr);
- }
-+ /* Print the Ethernet address */
-+ printk("%s: Ethernet addr: ", dev->name);
-+ for (i = 0; i < 5; i++)
-+ printk("%2.2x:", dev->dev_addr[i]);
-+ printk("%2.2x\n", dev->dev_addr[5]);
-
- if (lp->phy_type == 0) {
- PRINTK("%s: No PHY found\n", dev->name);
-@@ -2300,8 +2338,15 @@ static struct platform_driver smc911x_dr
- },
- };
-
-+#ifdef CONFIG_ARCH_GUMSTIX
-+extern void gumstix_smc911x_load(void);
-+#endif
-+
- static int __init smc911x_init(void)
- {
-+#ifdef CONFIG_ARCH_GUMSTIX
-+ gumstix_smc911x_load();
-+#endif
- return platform_driver_register(&smc911x_driver);
- }
-
---- /dev/null
-+++ b/drivers/net/gumstix-smc911x.c
-@@ -0,0 +1,148 @@
-+/*
-+ * Gumstix SMC911x chip intialization driver
-+ *
-+ * Author: Craig Hughes
-+ * Created: December 9, 2004
-+ * Copyright: (C) 2004 Craig Hughes
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/ioport.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/delay.h>
-+
-+#include <asm/arch/gumstix.h>
-+
-+#define SMC_DEBUG 9
-+#include <asm/io.h>
-+#include "smc911x.h"
-+
-+static struct resource gumstix_smc911x0_resources[] = {
-+ [0] = {
-+ .name = "smc911x-regs",
-+ .start = PXA_CS1_PHYS,
-+ .end = PXA_CS1_PHYS + 0x000fffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = GUMSTIX_ETH0_IRQ,
-+ .end = GUMSTIX_ETH0_IRQ,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource gumstix_smc911x1_resources[] = {
-+ [0] = {
-+ .name = "smc911x-regs",
-+ .start = PXA_CS2_PHYS,
-+ .end = PXA_CS2_PHYS + 0x000fffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = GUMSTIX_ETH1_IRQ,
-+ .end = GUMSTIX_ETH1_IRQ,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device gumstix_smc911x0_device = {
-+ .name = "smc911x",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(gumstix_smc911x0_resources),
-+ .resource = gumstix_smc911x0_resources,
-+};
-+
-+static struct platform_device gumstix_smc911x1_device = {
-+ .name = "smc911x",
-+ .id = 1,
-+ .num_resources = ARRAY_SIZE(gumstix_smc911x1_resources),
-+ .resource = gumstix_smc911x1_resources,
-+};
-+
-+static struct platform_device *smc911x_devices[] = {
-+ &gumstix_smc911x0_device,
-+ &gumstix_smc911x1_device,
-+};
-+
-+/* First we're going to test if there's a 2nd SMC911x, and if not, then we'll free up those resources and the GPIO lines
-+ * that it would otherwise use. We have no choice but to probe by doing:
-+ * Set nCS2 to CS2 mode
-+ * Set the reset line to GPIO out mode, and pull it high, then drop it low (to trigger reset)
-+ * Read from the memory space to check for the sentinel sequence identifying a likely SMC911x device
-+ */
-+int __init gumstix_smc911x_init(void)
-+{
-+ unsigned int val, num_devices=ARRAY_SIZE(smc911x_devices);
-+ void *ioaddr;
-+
-+ /* Set up nPWE */
-+ pxa_gpio_mode(GPIO49_nPWE_MD);
-+
-+ pxa_gpio_mode(GPIO78_nCS_2_MD);
-+ // If either if statement fails, then we'll drop out and turn_off_eth1,
-+ // if both succeed, then we'll skip that and just proceed with 2 cards
-+ if(request_mem_region(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT, "smc911x probe"))
-+ {
-+ ioaddr = ioremap(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT);
-+ val = SMC_GET_PN();
-+ iounmap(ioaddr);
-+ release_mem_region(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT);
-+ if (CHIP_9115 == val ||
-+ CHIP_9116 == val ||
-+ CHIP_9117 == val ||
-+ CHIP_9118 == val ) {
-+ goto proceed;
-+ }
-+ }
-+
-+turn_off_eth1:
-+ // This is apparently not an SMC911x
-+ // So, let's decrement the number of devices to request, and reset the GPIO lines to GPIO IN mode
-+ num_devices--;
-+ smc911x_devices[1] = NULL;
-+ pxa_gpio_mode(78 | GPIO_IN);
-+
-+proceed:
-+ pxa_gpio_mode(GPIO15_nCS_1_MD);
-+
-+ if(smc911x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD);
-+ pxa_gpio_mode(GPIO_GUMSTIX_ETH0_RST_MD);
-+
-+ if(smc911x_devices[1]) GPCR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
-+ GPCR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
-+ msleep(500); // Hold RESET for at least 200µ
-+
-+ if(smc911x_devices[1]) GPSR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
-+ GPSR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
-+ msleep(50);
-+
-+ return platform_add_devices(smc911x_devices, num_devices);
-+}
-+
-+void __exit gumstix_smc911x_exit(void)
-+{
-+ if(smc911x_devices[1] != NULL) platform_device_unregister(&gumstix_smc911x1_device);
-+ platform_device_unregister(&gumstix_smc911x0_device);
-+}
-+
-+void gumstix_smc911x_load(void) {}
-+EXPORT_SYMBOL(gumstix_smc911x_load);
-+
-+module_init(gumstix_smc911x_init);
-+module_exit(gumstix_smc911x_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Craig Hughes <craig@gumstix.com>");
-+MODULE_DESCRIPTION("Gumstix board SMC911x chip initialization driver");
-+MODULE_VERSION("1:0.1");
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -1020,6 +1020,13 @@ config SMC911X
- called smc911x. If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>
-
-+config SMC911X_GUMSTIX
-+ tristate
-+ default m if SMC911X=m
-+ default y if SMC911X=y
-+ depends on SMC911X && ARCH_GUMSTIX
-+
-+
- config NET_VENDOR_RACAL
- bool "Racal-Interlan (Micom) NI cards"
- depends on NET_ETHERNET && ISA
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -202,6 +202,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
- obj-$(CONFIG_MACB) += macb.o
-
- obj-$(CONFIG_SMC91X_GUMSTIX) += gumstix-smc91x.o
-+obj-$(CONFIG_SMC911X_GUMSTIX) += gumstix-smc911x.o
- obj-$(CONFIG_ARM) += arm/
- obj-$(CONFIG_DEV_APPLETALK) += appletalk/
- obj-$(CONFIG_TR) += tokenring/
---- a/include/asm-arm/arch-pxa/gumstix.h
-+++ b/include/asm-arm/arch-pxa/gumstix.h
-@@ -52,7 +52,7 @@
- #define GPIO_GUMSTIX_ETH0_RST 80
- #define GPIO_GUMSTIX_ETH0 36
- #else
--#define GPIO_GUMSTIX_ETH0_RST 32
-+#define GPIO_GUMSTIX_ETH0_RST 107
- #define GPIO_GUMSTIX_ETH0 99
- #endif
- #define GPIO_GUMSTIX_ETH1_RST 52
---- a/drivers/net/smc911x.h
-+++ b/drivers/net/smc911x.h
-@@ -33,7 +33,9 @@
- * Use the DMA feature on PXA chips
- */
- #ifdef CONFIG_ARCH_PXA
-+#if !defined( CONFIG_SMC911X_GUMSTIX ) && !defined( CONFIG_SMC911X_GUMSTIX_MODULE )
- #define SMC_USE_PXA_DMA 1
-+#endif
- #define SMC_USE_16BIT 0
- #define SMC_USE_32BIT 1
- #endif
-@@ -46,13 +48,13 @@
- #if SMC_USE_16BIT
- #define SMC_inb(a, r) readb((a) + (r))
- #define SMC_inw(a, r) readw((a) + (r))
--#define SMC_inl(a, r) ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw(a+2, r)<<16))
-+#define SMC_inl(a, r) ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw((a)+2, r)<<16))
- #define SMC_outb(v, a, r) writeb(v, (a) + (r))
- #define SMC_outw(v, a, r) writew(v, (a) + (r))
- #define SMC_outl(v, a, r) \
- do{ \
-- writel(v & 0xFFFF, (a) + (r)); \
-- writel(v >> 16, (a) + (r) + 2); \
-+ writel((v) & 0xFFFF, (a) + (r)); \
-+ writel((v) >> 16, (a) + (r) + 2); \
- } while (0)
- #define SMC_insl(a, r, p, l) readsw((short*)((a) + (r)), p, l*2)
- #define SMC_outsl(a, r, p, l) writesw((short*)((a) + (r)), p, l*2)