diff options
author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2012-04-21 16:45:32 +0000 |
---|---|---|
committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2012-04-21 16:45:32 +0000 |
commit | 4595ebf4956c826c8ba827b7e891d01e5511dcea (patch) | |
tree | 7a2bcf0c89702f4395c419ba27837dfe5cfc024f /target/linux/octeon/patches-2.6.30/003_pci_pcie_support.patch | |
parent | d71e7bf38e5008e69b189970ff305f4c7fdc6c76 (diff) |
octeon: remove 2.6.30 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31419 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/octeon/patches-2.6.30/003_pci_pcie_support.patch')
-rw-r--r-- | target/linux/octeon/patches-2.6.30/003_pci_pcie_support.patch | 5002 |
1 files changed, 0 insertions, 5002 deletions
diff --git a/target/linux/octeon/patches-2.6.30/003_pci_pcie_support.patch b/target/linux/octeon/patches-2.6.30/003_pci_pcie_support.patch deleted file mode 100644 index 32ba634c3..000000000 --- a/target/linux/octeon/patches-2.6.30/003_pci_pcie_support.patch +++ /dev/null @@ -1,5002 +0,0 @@ -This patch adds support for PCI and PCIe to the base Cavium OCTEON -processor support. - -Signed-off-by: David Daney <ddaney@caviumnetworks.com> ---- - arch/mips/Kconfig | 2 + - arch/mips/cavium-octeon/Makefile | 4 + - arch/mips/cavium-octeon/dma-octeon.c | 310 ++++++- - arch/mips/cavium-octeon/executive/Makefile | 2 + - .../cavium-octeon/executive/cvmx-helper-errata.c | 379 +++++++ - .../cavium-octeon/executive/cvmx-helper-util.c | 502 ++++++++++ - arch/mips/cavium-octeon/executive/cvmx-pcie.c | 1053 ++++++++++++++++++++ - arch/mips/cavium-octeon/msi.c | 288 ++++++ - arch/mips/cavium-octeon/octeon-irq.c | 2 + - arch/mips/cavium-octeon/pci-common.c | 137 +++ - arch/mips/cavium-octeon/pci-common.h | 39 + - arch/mips/cavium-octeon/pci.c | 568 +++++++++++ - arch/mips/cavium-octeon/pcie.c | 441 ++++++++ - arch/mips/include/asm/octeon/cvmx-asm.h | 3 +- - arch/mips/include/asm/octeon/cvmx-helper-errata.h | 92 ++ - arch/mips/include/asm/octeon/cvmx-helper-util.h | 266 +++++ - arch/mips/include/asm/octeon/cvmx-packet.h | 16 +- - arch/mips/include/asm/octeon/cvmx-pcie.h | 284 ++++++ - arch/mips/include/asm/octeon/cvmx-wqe.h | 422 ++++++++ - arch/mips/include/asm/octeon/cvmx.h | 12 + - arch/mips/include/asm/octeon/octeon.h | 2 + - 21 files changed, 4816 insertions(+), 8 deletions(-) - create mode 100644 arch/mips/cavium-octeon/executive/cvmx-helper-errata.c - create mode 100644 arch/mips/cavium-octeon/executive/cvmx-helper-util.c - create mode 100644 arch/mips/cavium-octeon/executive/cvmx-pcie.c - create mode 100644 arch/mips/cavium-octeon/msi.c - create mode 100644 arch/mips/cavium-octeon/pci-common.c - create mode 100644 arch/mips/cavium-octeon/pci-common.h - create mode 100644 arch/mips/cavium-octeon/pci.c - create mode 100644 arch/mips/cavium-octeon/pcie.c - create mode 100644 arch/mips/include/asm/octeon/cvmx-helper-errata.h - create mode 100644 arch/mips/include/asm/octeon/cvmx-helper-util.h - create mode 100644 arch/mips/include/asm/octeon/cvmx-pcie.h - create mode 100644 arch/mips/include/asm/octeon/cvmx-wqe.h - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -618,6 +618,8 @@ config CAVIUM_OCTEON_REFERENCE_BOARD - select SYS_HAS_EARLY_PRINTK - select SYS_HAS_CPU_CAVIUM_OCTEON - select SWAP_IO_SPACE -+ select HW_HAS_PCI -+ select ARCH_SUPPORTS_MSI - help - This option supports all of the Octeon reference boards from Cavium - Networks. It builds a kernel that dynamically determines the Octeon ---- a/arch/mips/cavium-octeon/Makefile -+++ b/arch/mips/cavium-octeon/Makefile -@@ -14,5 +14,9 @@ obj-y += dma-octeon.o flash_setup.o - obj-y += octeon-memcpy.o - - obj-$(CONFIG_SMP) += smp.o -+obj-$(CONFIG_PCI) += pci-common.o -+obj-$(CONFIG_PCI) += pci.o -+obj-$(CONFIG_PCI) += pcie.o -+obj-$(CONFIG_PCI_MSI) += msi.o - - EXTRA_CFLAGS += -Werror ---- a/arch/mips/cavium-octeon/dma-octeon.c -+++ b/arch/mips/cavium-octeon/dma-octeon.c -@@ -13,20 +13,326 @@ - */ - #include <linux/types.h> - #include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/string.h> -+#include <linux/dma-mapping.h> -+#include <linux/platform_device.h> -+#include <linux/scatterlist.h> -+ -+#include <linux/cache.h> -+#include <linux/io.h> -+ -+#include <asm/octeon/octeon.h> -+#include <asm/octeon/cvmx-npi-defs.h> -+#include <asm/octeon/cvmx-pci-defs.h> - - #include <dma-coherence.h> - -+#ifdef CONFIG_PCI -+#include "pci-common.h" -+#endif -+ -+#define BAR2_PCI_ADDRESS 0x8000000000ul -+ -+struct bar1_index_state { -+ int16_t ref_count; /* Number of PCI mappings using this index */ -+ uint16_t address_bits; /* Upper bits of physical address. This is -+ shifted 22 bits */ -+}; -+ -+#ifdef CONFIG_PCI -+static DEFINE_SPINLOCK(bar1_lock); -+static struct bar1_index_state bar1_state[32]; -+#endif -+ - dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size) - { -+#ifndef CONFIG_PCI - /* Without PCI/PCIe this function can be called for Octeon internal - devices such as USB. These devices all support 64bit addressing */ - mb(); - return virt_to_phys(ptr); -+#else -+ unsigned long flags; -+ uint64_t dma_mask; -+ int64_t start_index; -+ dma_addr_t result = -1; -+ uint64_t physical = virt_to_phys(ptr); -+ int64_t index; -+ -+ mb(); -+ /* -+ * Use the DMA masks to determine the allowed memory -+ * region. For us it doesn't limit the actual memory, just the -+ * address visible over PCI. Devices with limits need to use -+ * lower indexed Bar1 entries. -+ */ -+ if (dev) { -+ dma_mask = dev->coherent_dma_mask; -+ if (dev->dma_mask) -+ dma_mask = *dev->dma_mask; -+ } else -+ dma_mask = 0xfffffffful; -+ -+ /* -+ * Platform devices, such as the internal USB, skip all -+ * translation and use Octeon physical addresses directly. -+ */ -+ if (dev->bus == &platform_bus_type) -+ return physical; -+ -+ switch (octeon_dma_bar_type) { -+ case OCTEON_DMA_BAR_TYPE_PCIE: -+ if (unlikely(physical < (16ul << 10))) -+ panic("dma_map_single: Not allowed to map first 16KB." -+ " It interferes with BAR0 special area\n"); -+ else if ((physical + size >= (256ul << 20)) && -+ (physical < (512ul << 20))) -+ panic("dma_map_single: Not allowed to map bootbus\n"); -+ else if ((physical + size >= 0x400000000ull) && -+ physical < 0x410000000ull) -+ panic("dma_map_single: " -+ "Attempt to map illegal memory address 0x%lx\n", -+ physical); -+ else if (physical >= 0x420000000ull) -+ panic("dma_map_single: " -+ "Attempt to map illegal memory address 0x%lx\n", -+ physical); -+ else if ((physical + size >= -+ (4ull<<30) - (OCTEON_PCI_BAR1_HOLE_SIZE<<20)) -+ && physical < (4ull<<30)) -+ pr_warning("dma_map_single: Warning: " -+ "Mapping memory address that might " -+ "conflict with devices 0x%lx-0x%lx\n", -+ physical, physical+size-1); -+ /* The 2nd 256MB is mapped at 256<<20 instead of 0x410000000 */ -+ if ((physical >= 0x410000000ull) && physical < 0x420000000ull) -+ result = physical - 0x400000000ull; -+ else -+ result = physical; -+ if (((result+size-1) & dma_mask) != result+size-1) -+ panic("dma_map_single: Attempt to map address " -+ "0x%lx-0x%lx, which can't be accessed according " -+ "to the dma mask 0x%lx\n", -+ physical, physical+size-1, dma_mask); -+ goto done; -+ -+ case OCTEON_DMA_BAR_TYPE_BIG: -+#ifdef CONFIG_64BIT -+ /* If the device supports 64bit addressing, then use BAR2 */ -+ if (dma_mask > BAR2_PCI_ADDRESS) { -+ result = physical + BAR2_PCI_ADDRESS; -+ goto done; -+ } -+#endif -+ if (unlikely(physical < (4ul << 10))) { -+ panic("dma_map_single: Not allowed to map first 4KB. " -+ "It interferes with BAR0 special area\n"); -+ } else if (physical < (256ul << 20)) { -+ if (unlikely(physical + size > (256ul << 20))) -+ panic("dma_map_single: Requested memory spans " -+ "Bar0 0:256MB and bootbus\n"); -+ result = physical; -+ goto done; -+ } else if (unlikely(physical < (512ul << 20))) { -+ panic("dma_map_single: Not allowed to map bootbus\n"); -+ } else if (physical < (2ul << 30)) { -+ if (unlikely(physical + size > (2ul << 30))) -+ panic("dma_map_single: Requested memory spans " -+ "Bar0 512MB:2GB and BAR1\n"); -+ result = physical; -+ goto done; -+ } else if (physical < (2ul << 30) + (128 << 20)) { -+ /* Fall through */ -+ } else if (physical < -+ (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20)) { -+ if (unlikely -+ (physical + size > -+ (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20))) -+ panic("dma_map_single: Requested memory " -+ "extends past Bar1 (4GB-%luMB)\n", -+ OCTEON_PCI_BAR1_HOLE_SIZE); -+ result = physical; -+ goto done; -+ } else if ((physical >= 0x410000000ull) && -+ (physical < 0x420000000ull)) { -+ if (unlikely(physical + size > 0x420000000ull)) -+ panic("dma_map_single: Requested memory spans " -+ "non existant memory\n"); -+ /* BAR0 fixed mapping 256MB:512MB -> -+ * 16GB+256MB:16GB+512MB */ -+ result = physical - 0x400000000ull; -+ goto done; -+ } else { -+ /* Continued below switch statement */ -+ } -+ break; -+ -+ case OCTEON_DMA_BAR_TYPE_SMALL: -+#ifdef CONFIG_64BIT -+ /* If the device supports 64bit addressing, then use BAR2 */ -+ if (dma_mask > BAR2_PCI_ADDRESS) { -+ result = physical + BAR2_PCI_ADDRESS; -+ goto done; -+ } -+#endif -+ /* Continued below switch statement */ -+ break; -+ -+ default: -+ panic("dma_map_single: Invalid octeon_dma_bar_type\n"); -+ } -+ -+ /* Don't allow mapping to span multiple Bar entries. The hardware guys -+ won't guarantee that DMA across boards work */ -+ if (unlikely((physical >> 22) != ((physical + size - 1) >> 22))) -+ panic("dma_map_single: " -+ "Requested memory spans more than one Bar1 entry\n"); -+ -+ if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) -+ start_index = 31; -+ else if (unlikely(dma_mask < (1ul << 27))) -+ start_index = (dma_mask >> 22); -+ else -+ start_index = 31; -+ -+ /* Only one processor can access the Bar register at once */ -+ spin_lock_irqsave(&bar1_lock, flags); -+ -+ /* Look through Bar1 for existing mapping that will work */ -+ for (index = start_index; index >= 0; index--) { -+ if ((bar1_state[index].address_bits == physical >> 22) && -+ (bar1_state[index].ref_count)) { -+ /* An existing mapping will work, use it */ -+ bar1_state[index].ref_count++; -+ if (unlikely(bar1_state[index].ref_count < 0)) -+ panic("dma_map_single: " -+ "Bar1[%d] reference count overflowed\n", -+ (int) index); -+ result = (index << 22) | (physical & ((1 << 22) - 1)); -+ /* Large BAR1 is offset at 2GB */ -+ if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) -+ result += 2ul << 30; -+ goto done_unlock; -+ } -+ } -+ -+ /* No existing mappings, look for a free entry */ -+ for (index = start_index; index >= 0; index--) { -+ if (unlikely(bar1_state[index].ref_count == 0)) { -+ union cvmx_pci_bar1_indexx bar1_index; -+ /* We have a free entry, use it */ -+ bar1_state[index].ref_count = 1; -+ bar1_state[index].address_bits = physical >> 22; -+ bar1_index.u32 = 0; -+ /* Address bits[35:22] sent to L2C */ -+ bar1_index.s.addr_idx = physical >> 22; -+ /* Don't put PCI accesses in L2. */ -+ bar1_index.s.ca = 1; -+ /* Endian Swap Mode */ -+ bar1_index.s.end_swp = 1; -+ /* Set '1' when the selected address range is valid. */ -+ bar1_index.s.addr_v = 1; -+ octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), -+ bar1_index.u32); -+ /* An existing mapping will work, use it */ -+ result = (index << 22) | (physical & ((1 << 22) - 1)); -+ /* Large BAR1 is offset at 2GB */ -+ if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) -+ result += 2ul << 30; -+ goto done_unlock; -+ } -+ } -+ -+ pr_err("dma_map_single: " -+ "Can't find empty BAR1 index for physical mapping 0x%llx\n", -+ (unsigned long long) physical); -+ -+done_unlock: -+ spin_unlock_irqrestore(&bar1_lock, flags); -+done: -+ pr_debug("dma_map_single 0x%lx->0x%lx\n", physical, result); -+ return result; -+#endif - } - - void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) - { -- /* Without PCI/PCIe this function can be called for Octeon internal -- * devices such as USB. These devices all support 64bit addressing */ -+#ifndef CONFIG_PCI -+ /* -+ * Without PCI/PCIe this function can be called for Octeon internal -+ * devices such as USB. These devices all support 64bit addressing. -+ */ -+ return; -+#else -+ unsigned long flags; -+ uint64_t index; -+ -+ /* -+ * Platform devices, such as the internal USB, skip all -+ * translation and use Octeon physical addresses directly. -+ */ -+ if (dev->bus == &platform_bus_type) -+ return; -+ -+ switch (octeon_dma_bar_type) { -+ case OCTEON_DMA_BAR_TYPE_PCIE: -+ /* Nothing to do, all mappings are static */ -+ goto done; -+ -+ case OCTEON_DMA_BAR_TYPE_BIG: -+#ifdef CONFIG_64BIT -+ /* Nothing to do for addresses using BAR2 */ -+ if (dma_addr >= BAR2_PCI_ADDRESS) -+ goto done; -+#endif -+ if (unlikely(dma_addr < (4ul << 10))) -+ panic("dma_unmap_single: Unexpect DMA address 0x%lx\n", -+ dma_addr); -+ else if (dma_addr < (2ul << 30)) -+ /* Nothing to do for addresses using BAR0 */ -+ goto done; -+ else if (dma_addr < (2ul << 30) + (128ul << 20)) -+ /* Need to unmap, fall through */ -+ index = (dma_addr - (2ul << 30)) >> 22; -+ else if (dma_addr < -+ (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20)) -+ goto done; /* Nothing to do for the rest of BAR1 */ -+ else -+ panic("dma_unmap_single: Unexpect DMA address 0x%lx\n", -+ dma_addr); -+ /* Continued below switch statement */ -+ break; -+ -+ case OCTEON_DMA_BAR_TYPE_SMALL: -+#ifdef CONFIG_64BIT -+ /* Nothing to do for addresses using BAR2 */ -+ if (dma_addr >= BAR2_PCI_ADDRESS) -+ goto done; -+#endif -+ index = dma_addr >> 22; -+ /* Continued below switch statement */ -+ break; -+ -+ default: -+ panic("dma_unmap_single: Invalid octeon_dma_bar_type\n"); -+ } -+ -+ if (unlikely(index > 31)) -+ panic("dma_unmap_single: " -+ "Attempt to unmap an invalid address (0x%llx)\n", -+ (unsigned long long) dma_addr); -+ -+ spin_lock_irqsave(&bar1_lock, flags); -+ bar1_state[index].ref_count--; -+ if (bar1_state[index].ref_count == 0) -+ octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); -+ else if (unlikely(bar1_state[index].ref_count < 0)) -+ panic("dma_unmap_single: Bar1[%u] reference count < 0\n", -+ (int) index); -+ spin_unlock_irqrestore(&bar1_lock, flags); -+done: -+ pr_debug("dma_unmap_single 0x%lx\n", dma_addr); - return; -+#endif - } ---- a/arch/mips/cavium-octeon/executive/Makefile -+++ b/arch/mips/cavium-octeon/executive/Makefile -@@ -11,3 +11,5 @@ - - obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o - -+obj-$(CONFIG_PCI) += cvmx-pcie.o -+obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-util.o ---- /dev/null -+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c -@@ -0,0 +1,379 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * -+ * Fixes and workaround for Octeon chip errata. This file -+ * contains functions called by cvmx-helper to workaround known -+ * chip errata. For the most part, code doesn't need to call -+ * these functions directly. -+ * -+ */ -+#include <asm/octeon/octeon.h> -+ -+#include <asm/octeon/cvmx-helper-util.h> -+ -+#ifdef CVMX_ENABLE_PKO_FUNCTIONS -+ -+/** -+ * @INTERNAL -+ * Function to adjust internal IPD pointer alignments -+ * -+ * Returns 0 on success -+ * !0 on failure -+ */ -+int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) -+{ -+#define FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES \ -+ (CVMX_FPA_PACKET_POOL_SIZE - 8 - CVMX_HELPER_FIRST_MBUFF_SKIP) -+#define FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES \ -+ (CVMX_FPA_PACKET_POOL_SIZE - 8 - CVMX_HELPER_NOT_FIRST_MBUFF_SKIP) -+#define FIX_IPD_OUTPORT 0 -+ /* Ports 0-15 are interface 0, 16-31 are interface 1 */ -+#define INTERFACE(port) (port >> 4) -+#define INDEX(port) (port & 0xf) -+ uint64_t *p64; -+ cvmx_pko_command_word0_t pko_command; -+ cvmx_buf_ptr_t g_buffer, pkt_buffer; -+ cvmx_wqe_t *work; -+ int size, num_segs = 0, wqe_pcnt, pkt_pcnt; -+ cvmx_gmxx_prtx_cfg_t gmx_cfg; -+ int retry_cnt; -+ int retry_loop_cnt; -+ int mtu; -+ int i; -+ cvmx_helper_link_info_t link_info; -+ -+ /* Save values for restore at end */ -+ uint64_t prtx_cfg = -+ cvmx_read_csr(CVMX_GMXX_PRTX_CFG(INDEX(FIX_IPD_OUTPORT), -+ INTERFACE(FIX_IPD_OUTPORT))); -+ uint64_t tx_ptr_en = -+ cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT))); -+ uint64_t rx_ptr_en = -+ cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT))); -+ uint64_t rxx_jabber = -+ cvmx_read_csr(CVMX_GMXX_RXX_JABBER(INDEX(FIX_IPD_OUTPORT), -+ INTERFACE(FIX_IPD_OUTPORT))); -+ uint64_t frame_max = -+ cvmx_read_csr(CVMX_GMXX_RXX_FRM_MAX(INDEX(FIX_IPD_OUTPORT), -+ INTERFACE(FIX_IPD_OUTPORT))); -+ -+ /* Configure port to gig FDX as required for loopback mode */ -+ cvmx_helper_rgmii_internal_loopback(FIX_IPD_OUTPORT); -+ -+ /* -+ * Disable reception on all ports so if traffic is present it -+ * will not interfere. -+ */ -+ cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 0); -+ -+ cvmx_wait(100000000ull); -+ -+ for (retry_loop_cnt = 0; retry_loop_cnt < 10; retry_loop_cnt++) { -+ retry_cnt = 100000; -+ wqe_pcnt = cvmx_read_csr(CVMX_IPD_PTR_COUNT); -+ pkt_pcnt = (wqe_pcnt >> 7) & 0x7f; -+ wqe_pcnt &= 0x7f; -+ -+ num_segs = (2 + pkt_pcnt - wqe_pcnt) & 3; -+ -+ if (num_segs == 0) -+ goto fix_ipd_exit; -+ -+ num_segs += 1; -+ -+ size = -+ FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES + -+ ((num_segs - 1) * FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES) - -+ (FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES / 2); -+ -+ cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), -+ 1 << INDEX(FIX_IPD_OUTPORT)); -+ CVMX_SYNC; -+ -+ g_buffer.u64 = 0; -+ g_buffer.s.addr = -+ cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_WQE_POOL)); -+ if (g_buffer.s.addr == 0) { -+ cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT buffer " -+ "allocation failure.\n"); -+ goto fix_ipd_exit; -+ } -+ -+ g_buffer.s.pool = CVMX_FPA_WQE_POOL; -+ g_buffer.s.size = num_segs; -+ -+ pkt_buffer.u64 = 0; -+ pkt_buffer.s.addr = -+ cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL)); -+ if (pkt_buffer.s.addr == 0) { -+ cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT buffer " -+ "allocation failure.\n"); -+ goto fix_ipd_exit; -+ } -+ pkt_buffer.s.i = 1; -+ pkt_buffer.s.pool = CVMX_FPA_PACKET_POOL; -+ pkt_buffer.s.size = FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES; -+ -+ p64 = (uint64_t *) cvmx_phys_to_ptr(pkt_buffer.s.addr); -+ p64[0] = 0xffffffffffff0000ull; -+ p64[1] = 0x08004510ull; -+ p64[2] = ((uint64_t) (size - 14) << 48) | 0x5ae740004000ull; -+ p64[3] = 0x3a5fc0a81073c0a8ull; -+ -+ for (i = 0; i < num_segs; i++) { -+ if (i > 0) -+ pkt_buffer.s.size = -+ FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES; -+ -+ if (i == (num_segs - 1)) -+ pkt_buffer.s.i = 0; -+ -+ *(uint64_t *) cvmx_phys_to_ptr(g_buffer.s.addr + -+ 8 * i) = pkt_buffer.u64; -+ } -+ -+ /* Build the PKO command */ -+ pko_command.u64 = 0; -+ pko_command.s.segs = num_segs; -+ pko_command.s.total_bytes = size; -+ pko_command.s.dontfree = 0; -+ pko_command.s.gather = 1; -+ -+ gmx_cfg.u64 = -+ cvmx_read_csr(CVMX_GMXX_PRTX_CFG -+ (INDEX(FIX_IPD_OUTPORT), -+ INTERFACE(FIX_IPD_OUTPORT))); -+ gmx_cfg.s.en = 1; -+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG -+ (INDEX(FIX_IPD_OUTPORT), -+ INTERFACE(FIX_IPD_OUTPORT)), gmx_cfg.u64); -+ cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), -+ 1 << INDEX(FIX_IPD_OUTPORT)); -+ cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), -+ 1 << INDEX(FIX_IPD_OUTPORT)); -+ -+ mtu = -+ cvmx_read_csr(CVMX_GMXX_RXX_JABBER -+ (INDEX(FIX_IPD_OUTPORT), -+ INTERFACE(FIX_IPD_OUTPORT))); -+ cvmx_write_csr(CVMX_GMXX_RXX_JABBER -+ (INDEX(FIX_IPD_OUTPORT), -+ INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4); -+ cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX -+ (INDEX(FIX_IPD_OUTPORT), -+ INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4); -+ -+#if CVMX_PKO_USE_FAU_FOR_OUTPUT_QUEUES -+ cvmx_pko_send_packet_prepare(FIX_IPD_OUTPORT, -+ cvmx_pko_get_base_queue -+ (FIX_IPD_OUTPORT), -+ CVMX_PKO_LOCK_NONE); -+ cvmx_pko_send_packet_finish(FIX_IPD_OUTPORT, -+ cvmx_pko_get_base_queue -+ (FIX_IPD_OUTPORT), pko_command, -+ g_buffer, CVMX_PKO_LOCK_NONE); -+#else -+ cvmx_pko_send_packet_prepare(FIX_IPD_OUTPORT, -+ cvmx_pko_get_base_queue -+ (FIX_IPD_OUTPORT), -+ CVMX_PKO_LOCK_CMD_QUEUE); -+ cvmx_pko_send_packet_finish(FIX_IPD_OUTPORT, -+ cvmx_pko_get_base_queue -+ (FIX_IPD_OUTPORT), pko_command, -+ g_buffer, CVMX_PKO_LOCK_CMD_QUEUE); -+#endif -+ CVMX_SYNC; -+ -+ do { -+ work = cvmx_pow_work_request_sync(CVMX_POW_WAIT); -+ retry_cnt--; -+ } while ((work == NULL) && (retry_cnt > 0)); -+ -+ if (!retry_cnt) -+ cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " -+ "get_work() timeout occured.\n"); -+ -+ /* Free packet */ -+ if (work) -+ cvmx_helper_free_packet_data(work); -+ } -+ -+fix_ipd_exit: -+ -+ /* Return CSR configs to saved values */ -+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG -+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), -+ prtx_cfg); -+ cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), -+ tx_ptr_en); -+ cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), -+ rx_ptr_en); -+ cvmx_write_csr(CVMX_GMXX_RXX_JABBER -+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), -+ rxx_jabber); -+ cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX -+ (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), -+ frame_max); -+ cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0); -+ /* Set link to down so autonegotiation will set it up again */ -+ link_info.u64 = 0; -+ cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info); -+ -+ /* -+ * Bring the link back up as autonegotiation is not done in -+ * user applications. -+ */ -+ cvmx_helper_link_autoconf(FIX_IPD_OUTPORT); -+ -+ CVMX_SYNC; -+ if (num_segs) -+ cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT failed.\n"); -+ -+ return !!num_segs; -+ -+} -+ -+/** -+ * @INTERNAL -+ * Workaround ASX setup errata with CN38XX pass1 -+ * -+ * @interface: Interface to setup -+ * @port: Port to setup (0..3) -+ * @cpu_clock_hz: -+ * Chip frequency in Hertz -+ * -+ * Returns Zero on success, negative on failure -+ */ -+int __cvmx_helper_errata_asx_pass1(int interface, int port, int cpu_clock_hz) -+{ -+ /* Set hi water mark as per errata GMX-4 */ -+ if (cpu_clock_hz >= 325000000 && cpu_clock_hz < 375000000) -+ cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 12); -+ else if (cpu_clock_hz >= 375000000 && cpu_clock_hz < 437000000) -+ cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 11); -+ else if (cpu_clock_hz >= 437000000 && cpu_clock_hz < 550000000) -+ cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 10); -+ else if (cpu_clock_hz >= 550000000 && cpu_clock_hz < 687000000) -+ cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 9); -+ else -+ cvmx_dprintf("Illegal clock frequency (%d). " -+ "CVMX_ASXX_TX_HI_WATERX not set\n", -+ cpu_clock_hz); -+ return 0; -+} -+ -+/** -+ * This function needs to be called on all Octeon chips with -+ * errata PKI-100. -+ * -+ * The Size field is 8 too large in WQE and next pointers -+ * -+ * The Size field generated by IPD is 8 larger than it should -+ * be. The Size field is <55:40> of both: -+ * - WORD3 in the work queue entry, and -+ * - the next buffer pointer (which precedes the packet data -+ * in each buffer). -+ * -+ * @work: Work queue entry to fix -+ * Returns Zero on success. Negative on failure -+ */ -+int cvmx_helper_fix_ipd_packet_chain(cvmx_wqe_t *work) -+{ -+ uint64_t number_buffers = work->word2.s.bufs; -+ -+ /* We only need to do this if the work has buffers */ -+ if (number_buffers) { -+ cvmx_buf_ptr_t buffer_ptr = work->packet_ptr; -+ /* Check for errata PKI-100 */ -+ if ((buffer_ptr.s.pool == 0) && -+ (((uint64_t) buffer_ptr.s.size + -+ ((uint64_t) buffer_ptr.s.back << 7) + -+ ((uint64_t) buffer_ptr.s.addr & 0x7F)) != -+ (CVMX_FPA_PACKET_POOL_SIZE + 8))) { -+ /* fix is not needed */ -+ return 0; -+ } -+ /* Decrement the work packet pointer */ -+ buffer_ptr.s.size -= 8; -+ work->packet_ptr = buffer_ptr; -+ -+ /* -+ * Now loop through decrementing the size for each -+ * additional buffer. -+ */ -+ while (--number_buffers) { -+ /* Chain pointers are 8 bytes before the data */ -+ cvmx_buf_ptr_t *ptr = -+ (cvmx_buf_ptr_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr - 8); -+ buffer_ptr = *ptr; -+ buffer_ptr.s.size -= 8; -+ *ptr = buffer_ptr; -+ } -+ } -+ /* -+ * Make sure that these write go out before other operations -+ * such as FPA frees. -+ */ -+ CVMX_SYNCWS; -+ return 0; -+} -+ -+#endif /* CVMX_ENABLE_PKO_FUNCTIONS */ -+ -+/** -+ * Due to errata G-720, the 2nd order CDR circuit on CN52XX pass -+ * 1 doesn't work properly. The following code disables 2nd order -+ * CDR for the specified QLM. -+ * -+ * @qlm: QLM to disable 2nd order CDR for. -+ */ -+void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm) -+{ -+ int lane; -+ cvmx_helper_qlm_jtag_init(); -+ /* We need to load all four lanes of the QLM, a total of 1072 bits */ -+ for (lane = 0; lane < 4; lane++) { -+ /* -+ * Each lane has 268 bits. We need to set -+ * cfg_cdr_incx<67:64> = 3 and cfg_cdr_secord<77> = -+ * 1. All other bits are zero. Bits go in LSB first, -+ * so start off with the zeros for bits <63:0>. -+ */ -+ cvmx_helper_qlm_jtag_shift_zeros(qlm, 63 - 0 + 1); -+ /* cfg_cdr_incx<67:64>=3 */ -+ cvmx_helper_qlm_jtag_shift(qlm, 67 - 64 + 1, 3); -+ /* Zeros for bits <76:68> */ -+ cvmx_helper_qlm_jtag_shift_zeros(qlm, 76 - 68 + 1); -+ /* cfg_cdr_secord<77>=1 */ -+ cvmx_helper_qlm_jtag_shift(qlm, 77 - 77 + 1, 1); -+ /* Zeros for bits <267:78> */ -+ cvmx_helper_qlm_jtag_shift_zeros(qlm, 267 - 78 + 1); -+ } -+ cvmx_helper_qlm_jtag_update(qlm); -+} ---- /dev/null -+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c -@@ -0,0 +1,502 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * -+ * Small helper utilities. -+ * -+ */ -+ -+#include <asm/octeon/octeon.h> -+ -+#include <asm/octeon/cvmx-helper-util.h> -+ -+#ifdef CVMX_ENABLE_HELPER_FUNCTIONS -+ -+/** -+ * Get the version of the CVMX libraries. -+ * -+ * Returns Version string. Note this buffer is allocated statically -+ * and will be shared by all callers. -+ */ -+const char *cvmx_helper_get_version(void) -+{ -+ return OCTEON_SDK_VERSION_STRING; -+} -+ -+/** -+ * Convert a interface mode into a human readable string -+ * -+ * @mode: Mode to convert -+ * -+ * Returns String -+ */ -+const char *cvmx_helper_interface_mode_to_string(cvmx_helper_interface_mode_t -+ mode) -+{ -+ switch (mode) { -+ case CVMX_HELPER_INTERFACE_MODE_DISABLED: -+ return "DISABLED"; -+ case CVMX_HELPER_INTERFACE_MODE_RGMII: -+ return "RGMII"; -+ case CVMX_HELPER_INTERFACE_MODE_GMII: -+ return "GMII"; -+ case CVMX_HELPER_INTERFACE_MODE_SPI: -+ return "SPI"; -+ case CVMX_HELPER_INTERFACE_MODE_PCIE: -+ return "PCIE"; -+ case CVMX_HELPER_INTERFACE_MODE_XAUI: -+ return "XAUI"; -+ case CVMX_HELPER_INTERFACE_MODE_SGMII: -+ return "SGMII"; -+ case CVMX_HELPER_INTERFACE_MODE_PICMG: -+ return "PICMG"; -+ case CVMX_HELPER_INTERFACE_MODE_NPI: -+ return "NPI"; -+ case CVMX_HELPER_INTERFACE_MODE_LOOP: -+ return "LOOP"; -+ } -+ return "UNKNOWN"; -+} -+ -+/** -+ * Debug routine to dump the packet structure to the console -+ * -+ * @work: Work queue entry containing the packet to dump -+ */ -+int cvmx_helper_dump_packet(cvmx_wqe_t *work) -+{ -+ uint64_t count; -+ uint64_t remaining_bytes; -+ cvmx_buf_ptr_t buffer_ptr; -+ uint64_t start_of_buffer; -+ uint8_t *data_address; -+ uint8_t *end_of_data; -+ -+ cvmx_dprintf("Packet Length: %u\n", work->len); -+ cvmx_dprintf(" Input Port: %u\n", work->ipprt); -+ cvmx_dprintf(" QoS: %u\n", work->qos); -+ cvmx_dprintf(" Buffers: %u\n", work->word2.s.bufs); -+ -+ if (work->word2.s.bufs == 0) { -+ cvmx_ipd_wqe_fpa_queue_t wqe_pool; -+ wqe_pool.u64 = cvmx_read_csr(CVMX_IPD_WQE_FPA_QUEUE); -+ buffer_ptr.u64 = 0; -+ buffer_ptr.s.pool = wqe_pool.s.wqe_pool; -+ buffer_ptr.s.size = 128; -+ buffer_ptr.s.addr = cvmx_ptr_to_phys(work->packet_data); -+ if (cvmx_likely(!work->word2.s.not_IP)) { -+ if (work->word2.s.is_v6) -+ buffer_ptr.s.addr += 2; -+ else -+ buffer_ptr.s.addr += 6; -+ } -+ } else -+ buffer_ptr = work->packet_ptr; -+ remaining_bytes = work->len; -+ -+ while (remaining_bytes) { -+ start_of_buffer = -+ ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7; -+ cvmx_dprintf(" Buffer Start:%llx\n", -+ (unsigned long long)start_of_buffer); -+ cvmx_dprintf(" Buffer I : %u\n", buffer_ptr.s.i); -+ cvmx_dprintf(" Buffer Back: %u\n", buffer_ptr.s.back); -+ cvmx_dprintf(" Buffer Pool: %u\n", buffer_ptr.s.pool); -+ cvmx_dprintf(" Buffer Data: %llx\n", -+ (unsigned long long)buffer_ptr.s.addr); -+ cvmx_dprintf(" Buffer Size: %u\n", buffer_ptr.s.size); -+ -+ cvmx_dprintf("\t\t"); -+ data_address = (uint8_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr); -+ end_of_data = data_address + buffer_ptr.s.size; -+ count = 0; -+ while (data_address < end_of_data) { -+ if (remaining_bytes == 0) -+ break; -+ else -+ remaining_bytes--; -+ cvmx_dprintf("%02x", (unsigned int)*data_address); -+ data_address++; -+ if (remaining_bytes && (count == 7)) { -+ cvmx_dprintf("\n\t\t"); -+ count = 0; -+ } else -+ count++; -+ } -+ cvmx_dprintf("\n"); -+ -+ if (remaining_bytes) -+ buffer_ptr = -+ *(cvmx_buf_ptr_t *) cvmx_phys_to_ptr(buffer_ptr.s. -+ addr - 8); -+ } -+ return 0; -+} -+ -+/** -+ * Setup Random Early Drop on a specific input queue -+ * -+ * @queue: Input queue to setup RED on (0-7) -+ * @pass_thresh: -+ * Packets will begin slowly dropping when there are less than -+ * this many packet buffers free in FPA 0. -+ * @drop_thresh: -+ * All incomming packets will be dropped when there are less -+ * than this many free packet buffers in FPA 0. -+ * Returns Zero on success. Negative on failure -+ */ -+int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) -+{ -+ cvmx_ipd_qos_red_marks_t red_marks; -+ cvmx_ipd_red_quex_param_t red_param; -+ -+ /* -+ * Set RED to begin dropping packets when there are -+ * pass_thresh buffers left. It will linearly drop more -+ * packets until reaching drop_thresh buffers. -+ */ -+ red_marks.u64 = 0; -+ red_marks.s.drop = drop_thresh; -+ red_marks.s.pass = pass_thresh; -+ cvmx_write_csr(CVMX_IPD_QOSX_RED_MARKS(queue), red_marks.u64); -+ -+ /* Use the actual queue 0 counter, not the average */ -+ red_param.u64 = 0; -+ red_param.s.prb_con = -+ (255ul << 24) / (red_marks.s.pass - red_marks.s.drop); -+ red_param.s.avg_con = 1; -+ red_param.s.new_con = 255; -+ red_param.s.use_pcnt = 1; -+ cvmx_write_csr(CVMX_IPD_RED_QUEX_PARAM(queue), red_param.u64); -+ return 0; -+} -+ -+/** -+ * Setup Random Early Drop to automatically begin dropping packets. -+ * -+ * @pass_thresh: -+ * Packets will begin slowly dropping when there are less than -+ * this many packet buffers free in FPA 0. -+ * @drop_thresh: -+ * All incomming packets will be dropped when there are less -+ * than this many free packet buffers in FPA 0. -+ * Returns Zero on success. Negative on failure -+ */ -+int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) -+{ -+ cvmx_ipd_portx_bp_page_cnt_t page_cnt; -+ cvmx_ipd_bp_prt_red_end_t ipd_bp_prt_red_end; -+ cvmx_ipd_red_port_enable_t red_port_enable; -+ int queue; -+ int interface; -+ int port; -+ -+ /* Disable backpressure based on queued buffers. It needs SW support */ -+ page_cnt.u64 = 0; -+ page_cnt.s.bp_enb = 0; -+ page_cnt.s.page_cnt = 100; -+ for (interface = 0; interface < 2; interface++) { -+ for (port = cvmx_helper_get_first_ipd_port(interface); -+ port < cvmx_helper_get_last_ipd_port(interface); port++) -+ cvmx_write_csr(CVMX_IPD_PORTX_BP_PAGE_CNT(port), -+ page_cnt.u64); -+ } -+ -+ for (queue = 0; queue < 8; queue++) -+ cvmx_helper_setup_red_queue(queue, pass_thresh, drop_thresh); -+ -+ /* Shutoff the dropping based on the per port page count. SW isn't -+ decrementing it right now */ -+ ipd_bp_prt_red_end.u64 = 0; -+ ipd_bp_prt_red_end.s.prt_enb = 0; -+ cvmx_write_csr(CVMX_IPD_BP_PRT_RED_END, ipd_bp_prt_red_end.u64); -+ -+ red_port_enable.u64 = 0; -+ red_port_enable.s.prt_enb = 0xfffffffffull; -+ red_port_enable.s.avg_dly = 10000; -+ red_port_enable.s.prb_dly = 10000; -+ cvmx_write_csr(CVMX_IPD_RED_PORT_ENABLE, red_port_enable.u64); -+ -+ return 0; -+} -+ -+/** -+ * Setup the common GMX settings that determine the number of -+ * ports. These setting apply to almost all configurations of all -+ * chips. -+ * -+ * @interface: Interface to configure -+ * @num_ports: Number of ports on the interface -+ * -+ * Returns Zero on success, negative on failure -+ */ -+int __cvmx_helper_setup_gmx(int interface, int num_ports) -+{ -+ cvmx_gmxx_tx_prts_t gmx_tx_prts; -+ cvmx_gmxx_rx_prts_t gmx_rx_prts; -+ cvmx_pko_reg_gmx_port_mode_t pko_mode; -+ -+ /* Tell GMX the number of TX ports on this interface */ -+ gmx_tx_prts.u64 = cvmx_read_csr(CVMX_GMXX_TX_PRTS(interface)); -+ gmx_tx_prts.s.prts = num_ports; -+ cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), gmx_tx_prts.u64); -+ -+ /* -+ * Tell GMX the number of RX ports on this interface. This only -+ * applies to *GMII and XAUI ports. -+ */ -+ if (cvmx_helper_interface_get_mode(interface) == -+ CVMX_HELPER_INTERFACE_MODE_RGMII -+ || cvmx_helper_interface_get_mode(interface) == -+ CVMX_HELPER_INTERFACE_MODE_SGMII -+ || cvmx_helper_interface_get_mode(interface) == -+ CVMX_HELPER_INTERFACE_MODE_GMII -+ || cvmx_helper_interface_get_mode(interface) == -+ CVMX_HELPER_INTERFACE_MODE_XAUI) { -+ if (num_ports > 4) { -+ cvmx_dprintf("__cvmx_helper_setup_gmx: " -+ "Illegal num_ports\n"); -+ return -1; -+ } -+ -+ gmx_rx_prts.u64 = cvmx_read_csr(CVMX_GMXX_RX_PRTS(interface)); -+ gmx_rx_prts.s.prts = num_ports; -+ cvmx_write_csr(CVMX_GMXX_RX_PRTS(interface), gmx_rx_prts.u64); -+ } -+ -+ /* Skip setting CVMX_PKO_REG_GMX_PORT_MODE on 30XX and 31XX */ -+ if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN31XX) -+ || OCTEON_IS_MODEL(OCTEON_CN50XX)) -+ return 0; -+ -+ /* Tell PKO the number of ports on this interface */ -+ pko_mode.u64 = cvmx_read_csr(CVMX_PKO_REG_GMX_PORT_MODE); -+ if (interface == 0) { -+ if (num_ports == 1) -+ pko_mode.s.mode0 = 4; -+ else if (num_ports == 2) -+ pko_mode.s.mode0 = 3; -+ else if (num_ports <= 4) -+ pko_mode.s.mode0 = 2; -+ else if (num_ports <= 8) -+ pko_mode.s.mode0 = 1; -+ else -+ pko_mode.s.mode0 = 0; -+ } else { -+ if (num_ports == 1) -+ pko_mode.s.mode1 = 4; -+ else if (num_ports == 2) -+ pko_mode.s.mode1 = 3; -+ else if (num_ports <= 4) -+ pko_mode.s.mode1 = 2; -+ else if (num_ports <= 8) -+ pko_mode.s.mode1 = 1; -+ else -+ pko_mode.s.mode1 = 0; -+ } -+ cvmx_write_csr(CVMX_PKO_REG_GMX_PORT_MODE, pko_mode.u64); -+ return 0; -+} -+ -+/** -+ * Returns the IPD/PKO port number for a port on the given -+ * interface. -+ * -+ * @interface: Interface to use -+ * @port: Port on the interface -+ * -+ * Returns IPD/PKO port number -+ */ -+int cvmx_helper_get_ipd_port(int interface, int port) -+{ -+ switch (interface) { -+ case 0: -+ return port; -+ case 1: -+ return port + 16; -+ case 2: -+ return port + 32; -+ case 3: -+ return port + 36; -+ } -+ return -1; -+} -+ -+#endif /* CVMX_ENABLE_HELPER_FUNCTIONS */ -+ -+/** -+ * Returns the interface number for an IPD/PKO port number. -+ * -+ * @ipd_port: IPD/PKO port number -+ * -+ * Returns Interface number -+ */ -+int cvmx_helper_get_interface_num(int ipd_port) -+{ -+ if (ipd_port < 16) -+ return 0; -+ else if (ipd_port < 32) -+ return 1; -+ else if (ipd_port < 36) -+ return 2; -+ else if (ipd_port < 40) -+ return 3; -+ else -+ cvmx_dprintf("cvmx_helper_get_interface_num: " -+ "Illegal IPD port number\n"); -+ -+ return -1; -+} -+ -+/** -+ * Returns the interface index number for an IPD/PKO port -+ * number. -+ * -+ * @ipd_port: IPD/PKO port number -+ * -+ * Returns Interface index number -+ */ -+int cvmx_helper_get_interface_index_num(int ipd_port) -+{ -+ if (ipd_port < 32) -+ return ipd_port & 15; -+ else if (ipd_port < 36) -+ return ipd_port & 3; -+ else if (ipd_port < 40) -+ return ipd_port & 3; -+ else -+ cvmx_dprintf("cvmx_helper_get_interface_index_num: " -+ "Illegal IPD port number\n"); -+ -+ return -1; -+} -+ -+/** -+ * Initialize the internal QLM JTAG logic to allow programming -+ * of the JTAG chain by the cvmx_helper_qlm_jtag_*() functions. -+ * These functions should only be used at the direction of Cavium -+ * Networks. Programming incorrect values into the JTAG chain -+ * can cause chip damage. -+ */ -+void cvmx_helper_qlm_jtag_init(void) -+{ -+ union cvmx_ciu_qlm_jtgc jtgc; -+ int clock_div = 0; -+ int divisor = cvmx_sysinfo_get()->cpu_clock_hz / (25 * 1000000); -+ divisor = (divisor - 1) >> 2; -+ /* Convert the divisor into a power of 2 shift */ -+ CVMX_CLZ(clock_div, divisor); -+ clock_div = 32 - clock_div; -+ -+ /* -+ * Clock divider for QLM JTAG operations. eclk is divided by -+ * 2^(CLK_DIV + 2). -+ */ -+ jtgc.u64 = 0; -+ jtgc.s.clk_div = clock_div; -+ jtgc.s.mux_sel = 0; -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX)) -+ jtgc.s.bypass = 0x3; -+ else -+ jtgc.s.bypass = 0xf; -+ cvmx_write_csr(CVMX_CIU_QLM_JTGC, jtgc.u64); -+ cvmx_read_csr(CVMX_CIU_QLM_JTGC); -+} -+ -+/** -+ * Write up to 32bits into the QLM jtag chain. Bits are shifted -+ * into the MSB and out the LSB, so you should shift in the low -+ * order bits followed by the high order bits. The JTAG chain is -+ * 4 * 268 bits long, or 1072. -+ * -+ * @qlm: QLM to shift value into -+ * @bits: Number of bits to shift in (1-32). -+ * @data: Data to shift in. Bit 0 enters the chain first, followed by -+ * bit 1, etc. -+ * -+ * Returns The low order bits of the JTAG chain that shifted out of the -+ * circle. -+ */ -+uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) -+{ -+ union cvmx_ciu_qlm_jtgd jtgd; -+ jtgd.u64 = 0; -+ jtgd.s.shift = 1; -+ jtgd.s.shft_cnt = bits - 1; -+ jtgd.s.shft_reg = data; -+ if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) -+ jtgd.s.select = 1 << qlm; -+ cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); -+ do { -+ jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); -+ } while (jtgd.s.shift); -+ return jtgd.s.shft_reg >> (32 - bits); -+} -+ -+/** -+ * Shift long sequences of zeros into the QLM JTAG chain. It is -+ * common to need to shift more than 32 bits of zeros into the -+ * chain. This function is a convience wrapper around -+ * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of -+ * zeros at a time. -+ * -+ * @qlm: QLM to shift zeros into -+ * @bits: -+ */ -+void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits) -+{ -+ while (bits > 0) { -+ int n = bits; -+ if (n > 32) -+ n = 32; -+ cvmx_helper_qlm_jtag_shift(qlm, n, 0); -+ bits -= n; -+ } -+} -+ -+/** -+ * Program the QLM JTAG chain into all lanes of the QLM. You must -+ * have already shifted in 268*4, or 1072 bits into the JTAG -+ * chain. Updating invalid values can possibly cause chip damage. -+ * -+ * @qlm: QLM to program -+ */ -+void cvmx_helper_qlm_jtag_update(int qlm) -+{ -+ union cvmx_ciu_qlm_jtgd jtgd; -+ -+ /* Update the new data */ -+ jtgd.u64 = 0; -+ jtgd.s.update = 1; -+ if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) -+ jtgd.s.select = 1 << qlm; -+ cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); -+ do { -+ jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); -+ } while (jtgd.s.update); -+} ---- /dev/null -+++ b/arch/mips/cavium-octeon/executive/cvmx-pcie.c -@@ -0,0 +1,1053 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA -+ * 02110-1301 USA or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * -+ * Interface to PCIe as a host(RC) or target(EP) -+ * -+ */ -+#include <linux/delay.h> -+#include <asm/byteorder.h> -+ -+#include <asm/octeon/octeon.h> -+#include <asm/octeon/cvmx-npei-defs.h> -+#include <asm/octeon/cvmx-pciercx-defs.h> -+#include <asm/octeon/cvmx-pescx-defs.h> -+#include <asm/octeon/cvmx-pexp-defs.h> -+#include <asm/octeon/cvmx-pcieep-defs.h> -+#include <asm/octeon/cvmx-helper-errata.h> -+#include <asm/octeon/cvmx-pcie.h> -+ -+/** -+ * Return the Core virtual base address for PCIe IO access. IOs are -+ * read/written as an offset from this address. -+ * -+ * @pcie_port: PCIe port the IO is for -+ * -+ * Returns 64bit Octeon IO base address for read/write -+ */ -+uint64_t cvmx_pcie_get_io_base_address(int pcie_port) -+{ -+ union cvmx_pcie_address pcie_addr; -+ pcie_addr.u64 = 0; -+ pcie_addr.io.upper = 0; -+ pcie_addr.io.io = 1; -+ pcie_addr.io.did = 3; -+ pcie_addr.io.subdid = 2; -+ pcie_addr.io.es = 1; -+ pcie_addr.io.port = pcie_port; -+ return pcie_addr.u64; -+} -+ -+/** -+ * Size of the IO address region returned at address -+ * cvmx_pcie_get_io_base_address() -+ * -+ * @pcie_port: PCIe port the IO is for -+ * -+ * Returns Size of the IO window -+ */ -+uint64_t cvmx_pcie_get_io_size(int pcie_port) -+{ -+ return 1ull << 32; -+} -+ -+/** -+ * Return the Core virtual base address for PCIe MEM access. Memory is -+ * read/written as an offset from this address. -+ * -+ * @pcie_port: PCIe port the IO is for -+ * -+ * Returns 64bit Octeon IO base address for read/write -+ */ -+uint64_t cvmx_pcie_get_mem_base_address(int pcie_port) -+{ -+ union cvmx_pcie_address pcie_addr; -+ pcie_addr.u64 = 0; -+ pcie_addr.mem.upper = 0; -+ pcie_addr.mem.io = 1; -+ pcie_addr.mem.did = 3; -+ pcie_addr.mem.subdid = 3 + pcie_port; -+ return pcie_addr.u64; -+} -+ -+/** -+ * Size of the Mem address region returned at address -+ * cvmx_pcie_get_mem_base_address() -+ * -+ * @pcie_port: PCIe port the IO is for -+ * -+ * Returns Size of the Mem window -+ */ -+uint64_t cvmx_pcie_get_mem_size(int pcie_port) -+{ -+ return 1ull << 36; -+} -+ -+/** -+ * Initialize the RC config space CSRs -+ * -+ * @pcie_port: PCIe port to initialize -+ */ -+static void __cvmx_pcie_rc_initialize_config_space(int pcie_port) -+{ -+ union cvmx_pciercx_cfg030 pciercx_cfg030; -+ union cvmx_npei_ctl_status2 npei_ctl_status2; -+ union cvmx_pciercx_cfg070 pciercx_cfg070; -+ union cvmx_pciercx_cfg001 pciercx_cfg001; -+ union cvmx_pciercx_cfg032 pciercx_cfg032; -+ union cvmx_pciercx_cfg006 pciercx_cfg006; -+ union cvmx_pciercx_cfg008 pciercx_cfg008; -+ union cvmx_pciercx_cfg009 pciercx_cfg009; -+ union cvmx_pciercx_cfg010 pciercx_cfg010; -+ union cvmx_pciercx_cfg011 pciercx_cfg011; -+ union cvmx_pciercx_cfg035 pciercx_cfg035; -+ union cvmx_pciercx_cfg075 pciercx_cfg075; -+ union cvmx_pciercx_cfg034 pciercx_cfg034; -+ -+ /* Max Payload Size (PCIE*_CFG030[MPS]) */ -+ /* Max Read Request Size (PCIE*_CFG030[MRRS]) */ -+ /* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */ -+ /* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */ -+ pciercx_cfg030.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port)); -+ /* -+ * Max payload size = 128 bytes for best Octeon DMA -+ * performance. -+ */ -+ pciercx_cfg030.s.mps = 0; -+ /* -+ * Max read request size = 128 bytes for best Octeon DMA -+ * performance. -+ */ -+ pciercx_cfg030.s.mrrs = 0; -+ /* Enable relaxed ordering. */ -+ pciercx_cfg030.s.ro_en = 1; -+ /* Enable no snoop. */ -+ pciercx_cfg030.s.ns_en = 1; -+ /* Correctable error reporting enable. */ -+ pciercx_cfg030.s.ce_en = 1; -+ /* Non-fatal error reporting enable. */ -+ pciercx_cfg030.s.nfe_en = 1; -+ /* Fatal error reporting enable. */ -+ pciercx_cfg030.s.fe_en = 1; -+ /* Unsupported request reporting enable. */ -+ pciercx_cfg030.s.ur_en = 1; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port), -+ pciercx_cfg030.u32); -+ -+ /* -+ * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match -+ * PCIE*_CFG030[MPS] -+ * -+ * Max Read Request Size (NPEI_CTL_STATUS2[MRRS]) must not -+ * exceed PCIE*_CFG030[MRRS]. -+ */ -+ npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2); -+ /* Max payload size = 128 bytes for best Octeon DMA performance */ -+ npei_ctl_status2.s.mps = 0; -+ /* Max read request size = 128 bytes for best Octeon DMA performance */ -+ npei_ctl_status2.s.mrrs = 0; -+ cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64); -+ -+ /* ECRC Generation (PCIE*_CFG070[GE,CE]) */ -+ pciercx_cfg070.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port)); -+ pciercx_cfg070.s.ge = 1; /* ECRC generation enable. */ -+ pciercx_cfg070.s.ce = 1; /* ECRC check enable. */ -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port), -+ pciercx_cfg070.u32); -+ -+ /* -+ * Access Enables (PCIE*_CFG001[MSAE,ME]) ME and MSAE should -+ * always be set. -+ * -+ * Interrupt Disable (PCIE*_CFG001[I_DIS]) System Error -+ * Message Enable (PCIE*_CFG001[SEE]) -+ */ -+ pciercx_cfg001.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port)); -+ pciercx_cfg001.s.msae = 1; /* Memory space enable. */ -+ pciercx_cfg001.s.me = 1; /* Bus master enable. */ -+ pciercx_cfg001.s.i_dis = 1; /* INTx assertion disable. */ -+ pciercx_cfg001.s.see = 1; /* SERR# enable */ -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port), -+ pciercx_cfg001.u32); -+ -+ /* Advanced Error Recovery Message Enables */ -+ /* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */ -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0); -+ /* Use CVMX_PCIERCX_CFG067 hardware default */ -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0); -+ -+ /* Active State Power Management (PCIE*_CFG032[ASLPC]) */ -+ pciercx_cfg032.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); -+ pciercx_cfg032.s.aslpc = 0; /* Active state Link PM control. */ -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port), -+ pciercx_cfg032.u32); -+ -+ /* Entrance Latencies (PCIE*_CFG451[L0EL,L1EL]) */ -+ -+ /* -+ * Link Width Mode (PCIERCn_CFG452[LME]) - Set during -+ * cvmx_pcie_rc_initialize_link() -+ * -+ * Primary Bus Number (PCIERCn_CFG006[PBNUM]) -+ * -+ * We set the primary bus number to 1 so IDT bridges are -+ * happy. They don't like zero. -+ */ -+ pciercx_cfg006.u32 = 0; -+ pciercx_cfg006.s.pbnum = 1; -+ pciercx_cfg006.s.sbnum = 1; -+ pciercx_cfg006.s.subbnum = 1; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port), -+ pciercx_cfg006.u32); -+ -+ /* -+ * Memory-mapped I/O BAR (PCIERCn_CFG008) -+ * Most applications should disable the memory-mapped I/O BAR by -+ * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR] -+ */ -+ pciercx_cfg008.u32 = 0; -+ pciercx_cfg008.s.mb_addr = 0x100; -+ pciercx_cfg008.s.ml_addr = 0; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port), -+ pciercx_cfg008.u32); -+ -+ /* -+ * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011) -+ * Most applications should disable the prefetchable BAR by setting -+ * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] < -+ * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE] -+ */ -+ pciercx_cfg009.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port)); -+ pciercx_cfg010.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port)); -+ pciercx_cfg011.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port)); -+ pciercx_cfg009.s.lmem_base = 0x100; -+ pciercx_cfg009.s.lmem_limit = 0; -+ pciercx_cfg010.s.umem_base = 0x100; -+ pciercx_cfg011.s.umem_limit = 0; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port), -+ pciercx_cfg009.u32); -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port), -+ pciercx_cfg010.u32); -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port), -+ pciercx_cfg011.u32); -+ -+ /* -+ * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE]) -+ * PME Interrupt Enables (PCIERCn_CFG035[PMEIE]) -+ */ -+ pciercx_cfg035.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port)); -+ /* System error on correctable error enable. */ -+ pciercx_cfg035.s.secee = 1; -+ /* System error on fatal error enable. */ -+ pciercx_cfg035.s.sefee = 1; -+ /* System error on non-fatal error enable. */ -+ pciercx_cfg035.s.senfee = 1; -+ /* PME interrupt enable. */ -+ pciercx_cfg035.s.pmeie = 1; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port), -+ pciercx_cfg035.u32); -+ -+ /* -+ * Advanced Error Recovery Interrupt Enables -+ * (PCIERCn_CFG075[CERE,NFERE,FERE]) -+ */ -+ pciercx_cfg075.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port)); -+ /* Correctable error reporting enable. */ -+ pciercx_cfg075.s.cere = 1; -+ /* Non-fatal error reporting enable. */ -+ pciercx_cfg075.s.nfere = 1; -+ /* Fatal error reporting enable. */ -+ pciercx_cfg075.s.fere = 1; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port), -+ pciercx_cfg075.u32); -+ -+ /* HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN], -+ * PCIERCn_CFG034[DLLS_EN,CCINT_EN]) -+ */ -+ pciercx_cfg034.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port)); -+ /* Hot-plug interrupt enable. */ -+ pciercx_cfg034.s.hpint_en = 1; -+ /* Data Link Layer state changed enable */ -+ pciercx_cfg034.s.dlls_en = 1; -+ /* Command completed interrupt enable. */ -+ pciercx_cfg034.s.ccint_en = 1; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port), -+ pciercx_cfg034.u32); -+} -+ -+/** -+ * Initialize a host mode PCIe link. This function takes a PCIe -+ * port from reset to a link up state. Software can then begin -+ * configuring the rest of the link. -+ * -+ * @pcie_port: PCIe port to initialize -+ * -+ * Returns Zero on success -+ */ -+static int __cvmx_pcie_rc_initialize_link(int pcie_port) -+{ -+ uint64_t start_cycle; -+ union cvmx_pescx_ctl_status pescx_ctl_status; -+ union cvmx_pciercx_cfg452 pciercx_cfg452; -+ union cvmx_pciercx_cfg032 pciercx_cfg032; -+ union cvmx_pciercx_cfg448 pciercx_cfg448; -+ -+ /* Set the lane width */ -+ pciercx_cfg452.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port)); -+ pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); -+ if (pescx_ctl_status.s.qlm_cfg == 0) { -+ /* We're in 8 lane (56XX) or 4 lane (54XX) mode */ -+ pciercx_cfg452.s.lme = 0xf; -+ } else { -+ /* We're in 4 lane (56XX) or 2 lane (52XX) mode */ -+ pciercx_cfg452.s.lme = 0x7; -+ } -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port), -+ pciercx_cfg452.u32); -+ -+ /* -+ * CN52XX pass 1.x has an errata where length mismatches on UR -+ * responses can cause bus errors on 64bit memory -+ * reads. Turning off length error checking fixes this. -+ */ -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { -+ union cvmx_pciercx_cfg455 pciercx_cfg455; -+ pciercx_cfg455.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, -+ CVMX_PCIERCX_CFG455(pcie_port)); -+ pciercx_cfg455.s.m_cpl_len_err = 1; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port), -+ pciercx_cfg455.u32); -+ } -+ -+ /* Lane swap needs to be manually enabled for CN52XX */ -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) { -+ pescx_ctl_status.s.lane_swp = 1; -+ cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), -+ pescx_ctl_status.u64); -+ } -+ -+ /* Bring up the link */ -+ pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); -+ pescx_ctl_status.s.lnk_enb = 1; -+ cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64); -+ -+ /* -+ * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to -+ * be disabled. -+ */ -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) -+ __cvmx_helper_errata_qlm_disable_2nd_order_cdr(0); -+ -+ /* Wait for the link to come up */ -+ cvmx_dprintf("PCIe: Waiting for port %d link\n", pcie_port); -+ start_cycle = cvmx_get_cycle(); -+ do { -+ if (cvmx_get_cycle() - start_cycle > -+ 2 * cvmx_sysinfo_get()->cpu_clock_hz) { -+ cvmx_dprintf("PCIe: Port %d link timeout\n", -+ pcie_port); -+ return -1; -+ } -+ cvmx_wait(10000); -+ pciercx_cfg032.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, -+ CVMX_PCIERCX_CFG032(pcie_port)); -+ } while (pciercx_cfg032.s.dlla == 0); -+ -+ /* Display the link status */ -+ cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port, -+ pciercx_cfg032.s.nlw); -+ -+ /* -+ * Update the Replay Time Limit. Empirically, some PCIe -+ * devices take a little longer to respond than expected under -+ * load. As a workaround for this we configure the Replay Time -+ * Limit to the value expected for a 512 byte MPS instead of -+ * our actual 256 byte MPS. The numbers below are directly -+ * from the PCIe spec table 3-4. -+ */ -+ pciercx_cfg448.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port)); -+ switch (pciercx_cfg032.s.nlw) { -+ case 1: /* 1 lane */ -+ pciercx_cfg448.s.rtl = 1677; -+ break; -+ case 2: /* 2 lanes */ -+ pciercx_cfg448.s.rtl = 867; -+ break; -+ case 4: /* 4 lanes */ -+ pciercx_cfg448.s.rtl = 462; -+ break; -+ case 8: /* 8 lanes */ -+ pciercx_cfg448.s.rtl = 258; -+ break; -+ } -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), -+ pciercx_cfg448.u32); -+ -+ return 0; -+} -+ -+/** -+ * Initialize a PCIe port for use in host(RC) mode. It doesn't -+ * enumerate the bus. -+ * -+ * @pcie_port: PCIe port to initialize -+ * -+ * Returns Zero on success -+ */ -+int cvmx_pcie_rc_initialize(int pcie_port) -+{ -+ int i; -+ union cvmx_ciu_soft_prst ciu_soft_prst; -+ union cvmx_pescx_bist_status pescx_bist_status; -+ union cvmx_pescx_bist_status2 pescx_bist_status2; -+ union cvmx_npei_ctl_status npei_ctl_status; -+ union cvmx_npei_mem_access_ctl npei_mem_access_ctl; -+ union cvmx_npei_mem_access_subidx mem_access_subid; -+ union cvmx_npei_dbg_data npei_dbg_data; -+ union cvmx_pescx_ctl_status2 pescx_ctl_status2; -+ -+ /* -+ * Make sure we aren't trying to setup a target mode interface -+ * in host mode. -+ */ -+ npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); -+ if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) { -+ cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called " -+ "on port0, but port0 is not in host mode\n"); -+ return -1; -+ } -+ -+ /* -+ * Make sure a CN52XX isn't trying to bring up port 1 when it -+ * is disabled. -+ */ -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { -+ npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); -+ if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) { -+ cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() " -+ "called on port1, but port1 is disabled\n"); -+ return -1; -+ } -+ } -+ -+ /* -+ * PCIe switch arbitration mode. '0' == fixed priority NPEI, -+ * PCIe0, then PCIe1. '1' == round robin. -+ */ -+ npei_ctl_status.s.arb = 1; -+ /* Allow up to 0x20 config retries */ -+ npei_ctl_status.s.cfg_rtry = 0x20; -+ /* -+ * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS -+ * don't reset. -+ */ -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { -+ npei_ctl_status.s.p0_ntags = 0x20; -+ npei_ctl_status.s.p1_ntags = 0x20; -+ } -+ cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64); -+ -+ /* Bring the PCIe out of reset */ -+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) { -+ /* -+ * The EBH5200 board swapped the PCIe reset lines on -+ * the board. As a workaround for this bug, we bring -+ * both PCIe ports out of reset at the same time -+ * instead of on separate calls. So for port 0, we -+ * bring both out of reset and do nothing on port 1. -+ */ -+ if (pcie_port == 0) { -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); -+ /* -+ * After a chip reset the PCIe will also be in -+ * reset. If it isn't, most likely someone is -+ * trying to init it again without a proper -+ * PCIe reset. -+ */ -+ if (ciu_soft_prst.s.soft_prst == 0) { -+ /* Reset the ports */ -+ ciu_soft_prst.s.soft_prst = 1; -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST, -+ ciu_soft_prst.u64); -+ ciu_soft_prst.u64 = -+ cvmx_read_csr(CVMX_CIU_SOFT_PRST1); -+ ciu_soft_prst.s.soft_prst = 1; -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST1, -+ ciu_soft_prst.u64); -+ /* Wait until pcie resets the ports. */ -+ udelay(2000); -+ } -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); -+ ciu_soft_prst.s.soft_prst = 0; -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); -+ ciu_soft_prst.s.soft_prst = 0; -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); -+ } -+ } else { -+ /* -+ * The normal case: The PCIe ports are completely -+ * separate and can be brought out of reset -+ * independently. -+ */ -+ if (pcie_port) -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); -+ else -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); -+ /* -+ * After a chip reset the PCIe will also be in -+ * reset. If it isn't, most likely someone is trying -+ * to init it again without a proper PCIe reset. -+ */ -+ if (ciu_soft_prst.s.soft_prst == 0) { -+ /* Reset the port */ -+ ciu_soft_prst.s.soft_prst = 1; -+ if (pcie_port) -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST1, -+ ciu_soft_prst.u64); -+ else -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST, -+ ciu_soft_prst.u64); -+ /* Wait until pcie resets the ports. */ -+ udelay(2000); -+ } -+ if (pcie_port) { -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); -+ ciu_soft_prst.s.soft_prst = 0; -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); -+ } else { -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); -+ ciu_soft_prst.s.soft_prst = 0; -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); -+ } -+ } -+ -+ /* -+ * Wait for PCIe reset to complete. Due to errata PCIE-700, we -+ * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a -+ * fixed number of cycles. -+ */ -+ cvmx_wait(400000); -+ -+ /* PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of CN56XX and -+ CN52XX, so we only probe it on newer chips */ -+ if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) -+ && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { -+ /* Clear PCLK_RUN so we can check if the clock is running */ -+ pescx_ctl_status2.u64 = -+ cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); -+ pescx_ctl_status2.s.pclk_run = 1; -+ cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port), -+ pescx_ctl_status2.u64); -+ /* -+ * Now that we cleared PCLK_RUN, wait for it to be set -+ * again telling us the clock is running. -+ */ -+ if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port), -+ union cvmx_pescx_ctl_status2, -+ pclk_run, ==, 1, 10000)) { -+ cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n", -+ pcie_port); -+ return -1; -+ } -+ } -+ -+ /* -+ * Check and make sure PCIe came out of reset. If it doesn't -+ * the board probably hasn't wired the clocks up and the -+ * interface should be skipped. -+ */ -+ pescx_ctl_status2.u64 = -+ cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); -+ if (pescx_ctl_status2.s.pcierst) { -+ cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n", -+ pcie_port); -+ return -1; -+ } -+ -+ /* -+ * Check BIST2 status. If any bits are set skip this interface. This -+ * is an attempt to catch PCIE-813 on pass 1 parts. -+ */ -+ pescx_bist_status2.u64 = -+ cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port)); -+ if (pescx_bist_status2.u64) { -+ cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this " -+ "port isn't hooked up, skipping.\n", -+ pcie_port); -+ return -1; -+ } -+ -+ /* Check BIST status */ -+ pescx_bist_status.u64 = -+ cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port)); -+ if (pescx_bist_status.u64) -+ cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n", -+ pcie_port, CAST64(pescx_bist_status.u64)); -+ -+ /* Initialize the config space CSRs */ -+ __cvmx_pcie_rc_initialize_config_space(pcie_port); -+ -+ /* Bring the link up */ -+ if (__cvmx_pcie_rc_initialize_link(pcie_port)) { -+ cvmx_dprintf -+ ("PCIe: ERROR: cvmx_pcie_rc_initialize_link() failed\n"); -+ return -1; -+ } -+ -+ /* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */ -+ npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL); -+ /* Allow 16 words to combine */ -+ npei_mem_access_ctl.s.max_word = 0; -+ /* Wait up to 127 cycles for more data */ -+ npei_mem_access_ctl.s.timer = 127; -+ cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64); -+ -+ /* Setup Mem access SubDIDs */ -+ mem_access_subid.u64 = 0; -+ /* Port the request is sent to. */ -+ mem_access_subid.s.port = pcie_port; -+ /* Due to an errata on pass 1 chips, no merging is allowed. */ -+ mem_access_subid.s.nmerge = 1; -+ /* Endian-swap for Reads. */ -+ mem_access_subid.s.esr = 1; -+ /* Endian-swap for Writes. */ -+ mem_access_subid.s.esw = 1; -+ /* No Snoop for Reads. */ -+ mem_access_subid.s.nsr = 1; -+ /* No Snoop for Writes. */ -+ mem_access_subid.s.nsw = 1; -+ /* Disable Relaxed Ordering for Reads. */ -+ mem_access_subid.s.ror = 0; -+ /* Disable Relaxed Ordering for Writes. */ -+ mem_access_subid.s.row = 0; -+ /* PCIe Adddress Bits <63:34>. */ -+ mem_access_subid.s.ba = 0; -+ -+ /* -+ * Setup mem access 12-15 for port 0, 16-19 for port 1, -+ * supplying 36 bits of address space. -+ */ -+ for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) { -+ cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i), -+ mem_access_subid.u64); -+ /* Set each SUBID to extend the addressable range */ -+ mem_access_subid.s.ba += 1; -+ } -+ -+ /* -+ * Disable the peer to peer forwarding register. This must be -+ * setup by the OS after it enumerates the bus and assigns -+ * addresses to the PCIe busses. -+ */ -+ for (i = 0; i < 4; i++) { -+ cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1); -+ cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1); -+ } -+ -+ /* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */ -+ cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0); -+ -+ /* -+ * Disable Octeon's BAR1. It isn't needed in RC mode since -+ * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into -+ * the 2nd 256MB of memory. -+ */ -+ cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1); -+ -+ /* -+ * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take -+ * precedence where they overlap. It also overlaps with the -+ * device addresses, so make sure the peer to peer forwarding -+ * is set right. -+ */ -+ cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0); -+ -+ /* -+ * Setup BAR2 attributes -+ * -+ * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) -+ * - PTLP_RO,CTLP_RO should normally be set (except for debug). -+ * - WAIT_COM=0 will likely work for all applications. -+ * -+ * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]). -+ */ -+ if (pcie_port) { -+ union cvmx_npei_ctl_port1 npei_ctl_port; -+ npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1); -+ npei_ctl_port.s.bar2_enb = 1; -+ npei_ctl_port.s.bar2_esx = 1; -+ npei_ctl_port.s.bar2_cax = 0; -+ npei_ctl_port.s.ptlp_ro = 1; -+ npei_ctl_port.s.ctlp_ro = 1; -+ npei_ctl_port.s.wait_com = 0; -+ npei_ctl_port.s.waitl_com = 0; -+ cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64); -+ } else { -+ union cvmx_npei_ctl_port0 npei_ctl_port; -+ npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0); -+ npei_ctl_port.s.bar2_enb = 1; -+ npei_ctl_port.s.bar2_esx = 1; -+ npei_ctl_port.s.bar2_cax = 0; -+ npei_ctl_port.s.ptlp_ro = 1; -+ npei_ctl_port.s.ctlp_ro = 1; -+ npei_ctl_port.s.wait_com = 0; -+ npei_ctl_port.s.waitl_com = 0; -+ cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64); -+ } -+ return 0; -+} -+ -+/** -+ * Shutdown a PCIe port and put it in reset -+ * -+ * @pcie_port: PCIe port to shutdown -+ * -+ * Returns Zero on success -+ */ -+int cvmx_pcie_rc_shutdown(int pcie_port) -+{ -+ /* Wait for all pending operations to complete */ -+ if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CPL_LUT_VALID(pcie_port), -+ union cvmx_pescx_cpl_lut_valid, -+ tag, ==, 0, 2000)) -+ cvmx_dprintf("PCIe: Port %d shutdown timeout\n", pcie_port); -+ -+ /* Force reset */ -+ if (pcie_port) { -+ union cvmx_ciu_soft_prst ciu_soft_prst; -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); -+ ciu_soft_prst.s.soft_prst = 1; -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); -+ } else { -+ union cvmx_ciu_soft_prst ciu_soft_prst; -+ ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); -+ ciu_soft_prst.s.soft_prst = 1; -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); -+ } -+ return 0; -+} -+ -+/** -+ * Build a PCIe config space request address for a device -+ * -+ * @pcie_port: PCIe port to access -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * -+ * Returns 64bit Octeon IO address -+ */ -+static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus, -+ int dev, int fn, int reg) -+{ -+ union cvmx_pcie_address pcie_addr; -+ union cvmx_pciercx_cfg006 pciercx_cfg006; -+ -+ pciercx_cfg006.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port)); -+ if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0)) -+ return 0; -+ -+ pcie_addr.u64 = 0; -+ pcie_addr.config.upper = 2; -+ pcie_addr.config.io = 1; -+ pcie_addr.config.did = 3; -+ pcie_addr.config.subdid = 1; -+ pcie_addr.config.es = 1; -+ pcie_addr.config.port = pcie_port; -+ pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum); -+ pcie_addr.config.bus = bus; -+ pcie_addr.config.dev = dev; -+ pcie_addr.config.func = fn; -+ pcie_addr.config.reg = reg; -+ return pcie_addr.u64; -+} -+ -+/** -+ * Read 8bits from a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * -+ * Returns Result of the read -+ */ -+uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, -+ int fn, int reg) -+{ -+ uint64_t address = -+ __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); -+ if (address) -+ return cvmx_read64_uint8(address); -+ else -+ return 0xff; -+} -+ -+/** -+ * Read 16bits from a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * -+ * Returns Result of the read -+ */ -+uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, int fn, -+ int reg) -+{ -+ uint64_t address = -+ __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); -+ if (address) -+ return le16_to_cpu(cvmx_read64_uint16(address)); -+ else -+ return 0xffff; -+} -+ -+/** -+ * Read 32bits from a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * -+ * Returns Result of the read -+ */ -+uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, int fn, -+ int reg) -+{ -+ uint64_t address = -+ __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); -+ if (address) -+ return le32_to_cpu(cvmx_read64_uint32(address)); -+ else -+ return 0xffffffff; -+} -+ -+/** -+ * Write 8bits to a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * @val: Value to write -+ */ -+void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn, -+ int reg, uint8_t val) -+{ -+ uint64_t address = -+ __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); -+ if (address) -+ cvmx_write64_uint8(address, val); -+} -+ -+/** -+ * Write 16bits to a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * @val: Value to write -+ */ -+void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn, -+ int reg, uint16_t val) -+{ -+ uint64_t address = -+ __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); -+ if (address) -+ cvmx_write64_uint16(address, cpu_to_le16(val)); -+} -+ -+/** -+ * Write 32bits to a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * @val: Value to write -+ */ -+void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, -+ int reg, uint32_t val) -+{ -+ uint64_t address = -+ __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); -+ if (address) -+ cvmx_write64_uint32(address, cpu_to_le32(val)); -+} -+ -+/** -+ * Read a PCIe config space register indirectly. This is used for -+ * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. -+ * -+ * @pcie_port: PCIe port to read from -+ * @cfg_offset: Address to read -+ * -+ * Returns Value read -+ */ -+uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset) -+{ -+ union cvmx_pescx_cfg_rd pescx_cfg_rd; -+ pescx_cfg_rd.u64 = 0; -+ pescx_cfg_rd.s.addr = cfg_offset; -+ cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64); -+ pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port)); -+ return pescx_cfg_rd.s.data; -+} -+ -+/** -+ * Write a PCIe config space register indirectly. This is used for -+ * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. -+ * -+ * @pcie_port: PCIe port to write to -+ * @cfg_offset: Address to write -+ * @val: Value to write -+ */ -+void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, uint32_t val) -+{ -+ union cvmx_pescx_cfg_wr pescx_cfg_wr; -+ pescx_cfg_wr.u64 = 0; -+ pescx_cfg_wr.s.addr = cfg_offset; -+ pescx_cfg_wr.s.data = val; -+ cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64); -+} -+ -+/** -+ * Initialize a PCIe port for use in target(EP) mode. -+ * -+ * Returns Zero on success -+ */ -+int cvmx_pcie_ep_initialize(void) -+{ -+ int pcie_port = 0; -+ union cvmx_npei_ctl_status npei_ctl_status; -+ union cvmx_pciercx_cfg030 pciercx_cfg030; -+ union cvmx_npei_ctl_status2 npei_ctl_status2; -+ union cvmx_npei_mem_access_subidx mem_access_subid; -+ -+ npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); -+ if (npei_ctl_status.s.host_mode) -+ return -1; -+ -+ /* Enable bus master and memory */ -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIEEP_CFG001, 0x6); -+ -+ /* -+ * Max Payload Size (PCIE*_CFG030[MPS]) -+ * Max Read Request Size (PCIE*_CFG030[MRRS]) -+ * Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] -+ * Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) -+ */ -+ pciercx_cfg030.u32 = -+ cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port)); -+ /* Max payload size = 128 bytes (Limit of most PCs) */ -+ pciercx_cfg030.s.mps = 0; -+ /* -+ * Max read request size = 128 bytes for best Octeon DMA -+ * performance. -+ */ -+ pciercx_cfg030.s.mrrs = 0; -+ /* Enable relaxed ordering. */ -+ pciercx_cfg030.s.ro_en = 1; -+ /* Enable no snoop. */ -+ pciercx_cfg030.s.ns_en = 1; -+ /* Correctable error reporting enable. */ -+ pciercx_cfg030.s.ce_en = 1; -+ /* Non-fatal error reporting enable. */ -+ pciercx_cfg030.s.nfe_en = 1; -+ /* Fatal error reporting enable. */ -+ pciercx_cfg030.s.fe_en = 1; -+ /* Unsupported request reporting enable. */ -+ pciercx_cfg030.s.ur_en = 1; -+ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port), -+ pciercx_cfg030.u32); -+ -+ /* -+ * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match -+ * PCIE*_CFG030[MPS] -+ * -+ * Max Read Request Size (NPEI_CTL_STATUS2[MRRS]) must not -+ * exceed PCIE*_CFG030[MRRS] -+ */ -+ npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2); -+ /* Max payload size = 128 bytes (Limit of most PCs) */ -+ npei_ctl_status2.s.mps = 0; -+ /* Max read request size = 128 bytes for best Octeon DMA performance */ -+ npei_ctl_status2.s.mrrs = 0; -+ cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64); -+ -+ /* Setup Mem access SubDID 12 to access Host memory */ -+ mem_access_subid.u64 = 0; -+ /* Port the request is sent to. */ -+ mem_access_subid.s.port = pcie_port; -+ /* Merging is allowed in this window. */ -+ mem_access_subid.s.nmerge = 1; -+ /* Endian-swap for Reads. */ -+ mem_access_subid.s.esr = 0; -+ /* Endian-swap for Writes. */ -+ mem_access_subid.s.esw = 0; -+ /* No Snoop for Reads. */ -+ mem_access_subid.s.nsr = 1; -+ /* No Snoop for Writes. */ -+ mem_access_subid.s.nsw = 1; -+ /* Disable Relaxed Ordering for Reads. */ -+ mem_access_subid.s.ror = 0; -+ /* Disable Relaxed Ordering for Writes. */ -+ mem_access_subid.s.row = 0; -+ /* PCIe Adddress Bits <63:34>. */ -+ mem_access_subid.s.ba = 0; -+ cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(12), -+ mem_access_subid.u64); -+ return 0; -+} ---- /dev/null -+++ b/arch/mips/cavium-octeon/msi.c -@@ -0,0 +1,288 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2005-2007 Cavium Networks -+ */ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/msi.h> -+#include <linux/spinlock.h> -+#include <linux/interrupt.h> -+ -+#include <asm/octeon/octeon.h> -+#include <asm/octeon/cvmx-npi-defs.h> -+#include <asm/octeon/cvmx-pci-defs.h> -+#include <asm/octeon/cvmx-npei-defs.h> -+#include <asm/octeon/cvmx-pexp-defs.h> -+ -+#include "pci-common.h" -+ -+/* -+ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is -+ * in use. -+ */ -+static uint64_t msi_free_irq_bitmask; -+ -+/* -+ * Each bit in msi_multiple_irq_bitmask tells that the device using -+ * this bit in msi_free_irq_bitmask is also using the next bit. This -+ * is used so we can disable all of the MSI interrupts when a device -+ * uses multiple. -+ */ -+static uint64_t msi_multiple_irq_bitmask; -+ -+/* -+ * This lock controls updates to msi_free_irq_bitmask and -+ * msi_multiple_irq_bitmask. -+ */ -+static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); -+ -+ -+/** -+ * Called when a driver request MSI interrupts instead of the -+ * legacy INT A-D. This routine will allocate multiple interrupts -+ * for MSI devices that support them. A device can override this by -+ * programming the MSI control bits [6:4] before calling -+ * pci_enable_msi(). -+ * -+ * @param dev Device requesting MSI interrupts -+ * @param desc MSI descriptor -+ * -+ * Returns 0 on success. -+ */ -+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) -+{ -+ struct msi_msg msg; -+ uint16_t control; -+ int configured_private_bits; -+ int request_private_bits; -+ int irq; -+ int irq_step; -+ uint64_t search_mask; -+ -+ /* -+ * Read the MSI config to figure out how many IRQs this device -+ * wants. Most devices only want 1, which will give -+ * configured_private_bits and request_private_bits equal 0. -+ */ -+ pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, -+ &control); -+ -+ /* -+ * If the number of private bits has been configured then use -+ * that value instead of the requested number. This gives the -+ * driver the chance to override the number of interrupts -+ * before calling pci_enable_msi(). -+ */ -+ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; -+ if (configured_private_bits == 0) { -+ /* Nothing is configured, so use the hardware requested size */ -+ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; -+ } else { -+ /* -+ * Use the number of configured bits, assuming the -+ * driver wanted to override the hardware request -+ * value. -+ */ -+ request_private_bits = configured_private_bits; -+ } -+ -+ /* -+ * The PCI 2.3 spec mandates that there are at most 32 -+ * interrupts. If this device asks for more, only give it one. -+ */ -+ if (request_private_bits > 5) -+ request_private_bits = 0; -+ -+try_only_one: -+ /* -+ * The IRQs have to be aligned on a power of two based on the -+ * number being requested. -+ */ -+ irq_step = 1 << request_private_bits; -+ -+ /* Mask with one bit for each IRQ */ -+ search_mask = (1 << irq_step) - 1; -+ -+ /* -+ * We're going to search msi_free_irq_bitmask_lock for zero -+ * bits. This represents an MSI interrupt number that isn't in -+ * use. -+ */ -+ spin_lock(&msi_free_irq_bitmask_lock); -+ for (irq = 0; irq < 64; irq += irq_step) { -+ if ((msi_free_irq_bitmask & (search_mask << irq)) == 0) { -+ msi_free_irq_bitmask |= search_mask << irq; -+ msi_multiple_irq_bitmask |= (search_mask >> 1) << irq; -+ break; -+ } -+ } -+ spin_unlock(&msi_free_irq_bitmask_lock); -+ -+ /* Make sure the search for available interrupts didn't fail */ -+ if (irq >= 64) { -+ if (request_private_bits) { -+ pr_err("arch_setup_msi_irq: Unable to find %d free " -+ "interrupts, trying just one", -+ 1 << request_private_bits); -+ request_private_bits = 0; -+ goto try_only_one; -+ } else -+ panic("arch_setup_msi_irq: Unable to find a free MSI " -+ "interrupt"); -+ } -+ -+ /* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */ -+ irq += OCTEON_IRQ_MSI_BIT0; -+ -+ switch (octeon_dma_bar_type) { -+ case OCTEON_DMA_BAR_TYPE_SMALL: -+ /* When not using big bar, Bar 0 is based at 128MB */ -+ msg.address_lo = -+ ((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff; -+ msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32; -+ case OCTEON_DMA_BAR_TYPE_BIG: -+ /* When using big bar, Bar 0 is based at 0 */ -+ msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff; -+ msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32; -+ break; -+ case OCTEON_DMA_BAR_TYPE_PCIE: -+ /* When using PCIe, Bar 0 is based at 0 */ -+ /* FIXME CVMX_NPEI_MSI_RCV* other than 0? */ -+ msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff; -+ msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32; -+ break; -+ default: -+ panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n"); -+ } -+ msg.data = irq - OCTEON_IRQ_MSI_BIT0; -+ -+ /* Update the number of IRQs the device has available to it */ -+ control &= ~PCI_MSI_FLAGS_QSIZE; -+ control |= request_private_bits << 4; -+ pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, -+ control); -+ -+ set_irq_msi(irq, desc); -+ write_msi_msg(irq, &msg); -+ return 0; -+} -+ -+ -+/** -+ * Called when a device no longer needs its MSI interrupts. All -+ * MSI interrupts for the device are freed. -+ * -+ * @irq: The devices first irq number. There may be multple in sequence. -+ */ -+void arch_teardown_msi_irq(unsigned int irq) -+{ -+ int number_irqs; -+ uint64_t bitmask; -+ -+ if ((irq < OCTEON_IRQ_MSI_BIT0) || (irq > OCTEON_IRQ_MSI_BIT63)) -+ panic("arch_teardown_msi_irq: Attempted to teardown illegal " -+ "MSI interrupt (%d)", irq); -+ irq -= OCTEON_IRQ_MSI_BIT0; -+ -+ /* -+ * Count the number of IRQs we need to free by looking at the -+ * msi_multiple_irq_bitmask. Each bit set means that the next -+ * IRQ is also owned by this device. -+ */ -+ number_irqs = 0; -+ while ((irq+number_irqs < 64) && -+ (msi_multiple_irq_bitmask & (1ull << (irq + number_irqs)))) -+ number_irqs++; -+ number_irqs++; -+ /* Mask with one bit for each IRQ */ -+ bitmask = (1 << number_irqs) - 1; -+ /* Shift the mask to the correct bit location */ -+ bitmask <<= irq; -+ if ((msi_free_irq_bitmask & bitmask) != bitmask) -+ panic("arch_teardown_msi_irq: Attempted to teardown MSI " -+ "interrupt (%d) not in use", irq); -+ -+ /* Checks are done, update the in use bitmask */ -+ spin_lock(&msi_free_irq_bitmask_lock); -+ msi_free_irq_bitmask &= ~bitmask; -+ msi_multiple_irq_bitmask &= ~bitmask; -+ spin_unlock(&msi_free_irq_bitmask_lock); -+} -+ -+ -+/** -+ * Called by the interrupt handling code when an MSI interrupt -+ * occurs. -+ * -+ * @param cpl -+ * @param dev_id -+ * -+ * @return -+ */ -+static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) -+{ -+ uint64_t msi_bits; -+ int irq; -+ -+ if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) -+ msi_bits = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_RCV0); -+ else -+ msi_bits = cvmx_read_csr(CVMX_NPI_NPI_MSI_RCV); -+ irq = fls64(msi_bits); -+ if (irq) { -+ irq += OCTEON_IRQ_MSI_BIT0 - 1; -+ if (irq_desc[irq].action) { -+ do_IRQ(irq); -+ return IRQ_HANDLED; -+ } else { -+ pr_err("Spurious MSI interrupt %d\n", irq); -+ if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { -+ /* These chips have PCIe */ -+ cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0, -+ 1ull << (irq - -+ OCTEON_IRQ_MSI_BIT0)); -+ } else { -+ /* These chips have PCI */ -+ cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV, -+ 1ull << (irq - -+ OCTEON_IRQ_MSI_BIT0)); -+ } -+ } -+ } -+ return IRQ_NONE; -+} -+ -+ -+/** -+ * Initializes the MSI interrupt handling code -+ * -+ * @return -+ */ -+int octeon_msi_initialize(void) -+{ -+ int r; -+ if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { -+ r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, -+ IRQF_SHARED, -+ "MSI[0:63]", octeon_msi_interrupt); -+ } else if (octeon_is_pci_host()) { -+ r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, -+ IRQF_SHARED, -+ "MSI[0:15]", octeon_msi_interrupt); -+ r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, -+ IRQF_SHARED, -+ "MSI[16:31]", octeon_msi_interrupt); -+ r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, -+ IRQF_SHARED, -+ "MSI[32:47]", octeon_msi_interrupt); -+ r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, -+ IRQF_SHARED, -+ "MSI[48:63]", octeon_msi_interrupt); -+ } -+ return 0; -+} -+ -+subsys_initcall(octeon_msi_initialize); ---- a/arch/mips/cavium-octeon/octeon-irq.c -+++ b/arch/mips/cavium-octeon/octeon-irq.c -@@ -10,6 +10,8 @@ - #include <linux/hardirq.h> - - #include <asm/octeon/octeon.h> -+#include <asm/octeon/cvmx-pexp-defs.h> -+#include <asm/octeon/cvmx-npi-defs.h> - - DEFINE_RWLOCK(octeon_irq_ciu0_rwlock); - DEFINE_RWLOCK(octeon_irq_ciu1_rwlock); ---- /dev/null -+++ b/arch/mips/cavium-octeon/pci-common.c -@@ -0,0 +1,137 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2005-2007 Cavium Networks -+ */ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/pci.h> -+#include <linux/interrupt.h> -+#include <linux/time.h> -+#include <linux/delay.h> -+#include "pci-common.h" -+ -+typeof(pcibios_map_irq) *octeon_pcibios_map_irq; -+enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; -+ -+/** -+ * Map a PCI device to the appropriate interrupt line -+ * -+ * @param dev The Linux PCI device structure for the device to map -+ * @param slot The slot number for this device on __BUS 0__. Linux -+ * enumerates through all the bridges and figures out the -+ * slot on Bus 0 where this device eventually hooks to. -+ * @param pin The PCI interrupt pin read from the device, then swizzled -+ * as it goes through each bridge. -+ * @return Interrupt number for the device -+ */ -+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (octeon_pcibios_map_irq) -+ return octeon_pcibios_map_irq(dev, slot, pin); -+ else -+ panic("octeon_pcibios_map_irq doesn't point to a " -+ "pcibios_map_irq() function"); -+} -+ -+ -+/** -+ * Called to perform platform specific PCI setup -+ * -+ * @param dev -+ * @return -+ */ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ uint16_t config; -+ uint32_t dconfig; -+ int pos; -+ /* -+ * Force the Cache line setting to 64 bytes. The standard -+ * Linux bus scan doesn't seem to set it. Octeon really has -+ * 128 byte lines, but Intel bridges get really upset if you -+ * try and set values above 64 bytes. Value is specified in -+ * 32bit words. -+ */ -+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); -+ /* Set latency timers for all devices */ -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); -+ -+ /* Enable reporting System errors and parity errors on all devices */ -+ /* Enable parity checking and error reporting */ -+ pci_read_config_word(dev, PCI_COMMAND, &config); -+ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; -+ pci_write_config_word(dev, PCI_COMMAND, config); -+ -+ if (dev->subordinate) { -+ /* Set latency timers on sub bridges */ -+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); -+ /* More bridge error detection */ -+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); -+ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; -+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); -+ } -+ -+ /* Enable the PCIe normal error reporting */ -+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP); -+ if (pos) { -+ /* Update Device Control */ -+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); -+ /* Correctable Error Reporting */ -+ config |= PCI_EXP_DEVCTL_CERE; -+ /* Non-Fatal Error Reporting */ -+ config |= PCI_EXP_DEVCTL_NFERE; -+ /* Fatal Error Reporting */ -+ config |= PCI_EXP_DEVCTL_FERE; -+ /* Unsupported Request */ -+ config |= PCI_EXP_DEVCTL_URRE; -+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); -+ } -+ -+ /* Find the Advanced Error Reporting capability */ -+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); -+ if (pos) { -+ /* Clear Uncorrectable Error Status */ -+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, -+ &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, -+ dconfig); -+ /* Enable reporting of all uncorrectable errors */ -+ /* Uncorrectable Error Mask - turned on bits disable errors */ -+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); -+ /* -+ * Leave severity at HW default. This only controls if -+ * errors are reported as uncorrectable or -+ * correctable, not if the error is reported. -+ */ -+ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ -+ /* Clear Correctable Error Status */ -+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); -+ /* Enable reporting of all correctable errors */ -+ /* Correctable Error Mask - turned on bits disable errors */ -+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); -+ /* Advanced Error Capabilities */ -+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); -+ /* ECRC Generation Enable */ -+ if (config & PCI_ERR_CAP_ECRC_GENC) -+ config |= PCI_ERR_CAP_ECRC_GENE; -+ /* ECRC Check Enable */ -+ if (config & PCI_ERR_CAP_ECRC_CHKC) -+ config |= PCI_ERR_CAP_ECRC_CHKE; -+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); -+ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ -+ /* Report all errors to the root complex */ -+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, -+ PCI_ERR_ROOT_CMD_COR_EN | -+ PCI_ERR_ROOT_CMD_NONFATAL_EN | -+ PCI_ERR_ROOT_CMD_FATAL_EN); -+ /* Clear the Root status register */ -+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); -+ } -+ -+ return 0; -+} ---- /dev/null -+++ b/arch/mips/cavium-octeon/pci-common.h -@@ -0,0 +1,39 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2005-2007 Cavium Networks -+ */ -+#ifndef __OCTEON_PCI_COMMON_H__ -+#define __OCTEON_PCI_COMMON_H__ -+ -+#include <linux/pci.h> -+ -+/* Some PCI cards require delays when accessing config space. */ -+#define PCI_CONFIG_SPACE_DELAY 10000 -+ -+/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the -+ Octeon specific version pointed to by this variable. This function needs to -+ change for PCI or PCIe based hosts */ -+extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq; -+ -+/* The following defines are only used when octeon_dma_bar_type = -+ OCTEON_DMA_BAR_TYPE_BIG */ -+#define OCTEON_PCI_BAR1_HOLE_BITS 5 -+#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3)) -+ -+enum octeon_dma_bar_type { -+ OCTEON_DMA_BAR_TYPE_INVALID, -+ OCTEON_DMA_BAR_TYPE_SMALL, -+ OCTEON_DMA_BAR_TYPE_BIG, -+ OCTEON_DMA_BAR_TYPE_PCIE -+}; -+ -+/** -+ * This is a variable to tell the DMA mapping system in dma-octeon.c -+ * how to map PCI DMA addresses. -+ */ -+extern enum octeon_dma_bar_type octeon_dma_bar_type; -+ -+#endif ---- /dev/null -+++ b/arch/mips/cavium-octeon/pci.c -@@ -0,0 +1,568 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2005-2007 Cavium Networks -+ */ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/pci.h> -+#include <linux/interrupt.h> -+#include <linux/time.h> -+#include <linux/delay.h> -+ -+#include <asm/time.h> -+ -+#include <asm/octeon/octeon.h> -+#include <asm/octeon/cvmx-npi-defs.h> -+#include <asm/octeon/cvmx-pci-defs.h> -+ -+#include "pci-common.h" -+ -+#define USE_OCTEON_INTERNAL_ARBITER -+ -+/* -+ * Octeon's PCI controller uses did=3, subdid=2 for PCI IO -+ * addresses. Use PCI endian swapping 1 so no address swapping is -+ * necessary. The Linux io routines will endian swap the data. -+ */ -+#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull -+#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32) -+ -+/* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */ -+#define OCTEON_PCI_MEMSPACE_OFFSET (0x00011b0000000000ull) -+ -+/** -+ * This is the bit decoding used for the Octeon PCI controller addresses -+ */ -+union octeon_pci_address { -+ uint64_t u64; -+ struct { -+ uint64_t upper:2; -+ uint64_t reserved:13; -+ uint64_t io:1; -+ uint64_t did:5; -+ uint64_t subdid:3; -+ uint64_t reserved2:4; -+ uint64_t endian_swap:2; -+ uint64_t reserved3:10; -+ uint64_t bus:8; -+ uint64_t dev:5; -+ uint64_t func:3; -+ uint64_t reg:8; -+ } s; -+}; -+ -+/** -+ * Return the mapping of PCI device number to IRQ line. Each -+ * character in the return string represents the interrupt -+ * line for the device at that position. Device 1 maps to the -+ * first character, etc. The characters A-D are used for PCI -+ * interrupts. -+ * -+ * Returns PCI interrupt mapping -+ */ -+const char *octeon_get_pci_interrupts(void) -+{ -+ /* -+ * Returning an empty string causes the interrupts to be -+ * routed based on the PCI specification. From the PCI spec: -+ * -+ * INTA# of Device Number 0 is connected to IRQW on the system -+ * board. (Device Number has no significance regarding being -+ * located on the system board or in a connector.) INTA# of -+ * Device Number 1 is connected to IRQX on the system -+ * board. INTA# of Device Number 2 is connected to IRQY on the -+ * system board. INTA# of Device Number 3 is connected to IRQZ -+ * on the system board. The table below describes how each -+ * agent's INTx# lines are connected to the system board -+ * interrupt lines. The following equation can be used to -+ * determine to which INTx# signal on the system board a given -+ * device's INTx# line(s) is connected. -+ * -+ * MB = (D + I) MOD 4 MB = System board Interrupt (IRQW = 0, -+ * IRQX = 1, IRQY = 2, and IRQZ = 3) D = Device Number I = -+ * Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and -+ * INTD# = 3) -+ */ -+ switch (octeon_bootinfo->board_type) { -+ case CVMX_BOARD_TYPE_NAO38: -+ /* This is really the NAC38 */ -+ return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA"; -+ case CVMX_BOARD_TYPE_THUNDER: -+ return ""; -+ case CVMX_BOARD_TYPE_EBH3000: -+ return ""; -+ case CVMX_BOARD_TYPE_EBH3100: -+ case CVMX_BOARD_TYPE_CN3010_EVB_HS5: -+ case CVMX_BOARD_TYPE_CN3005_EVB_HS5: -+ return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA"; -+ case CVMX_BOARD_TYPE_BBGW_REF: -+ return "AABCD"; -+ default: -+ return ""; -+ } -+} -+ -+/** -+ * Map a PCI device to the appropriate interrupt line -+ * -+ * @dev: The Linux PCI device structure for the device to map -+ * @slot: The slot number for this device on __BUS 0__. Linux -+ * enumerates through all the bridges and figures out the -+ * slot on Bus 0 where this device eventually hooks to. -+ * @pin: The PCI interrupt pin read from the device, then swizzled -+ * as it goes through each bridge. -+ * Returns Interrupt number for the device -+ */ -+int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev, -+ u8 slot, u8 pin) -+{ -+ int irq_num; -+ const char *interrupts; -+ int dev_num; -+ -+ /* Get the board specific interrupt mapping */ -+ interrupts = octeon_get_pci_interrupts(); -+ -+ dev_num = dev->devfn >> 3; -+ if (dev_num < strlen(interrupts)) -+ irq_num = ((interrupts[dev_num] - 'A' + pin - 1) & 3) + -+ OCTEON_IRQ_PCI_INT0; -+ else -+ irq_num = ((slot + pin - 3) & 3) + OCTEON_IRQ_PCI_INT0; -+ return irq_num; -+} -+ -+ -+/** -+ * Read a value from configuration space -+ * -+ */ -+static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ union octeon_pci_address pci_addr; -+ -+ pci_addr.u64 = 0; -+ pci_addr.s.upper = 2; -+ pci_addr.s.io = 1; -+ pci_addr.s.did = 3; -+ pci_addr.s.subdid = 1; -+ pci_addr.s.endian_swap = 1; -+ pci_addr.s.bus = bus->number; -+ pci_addr.s.dev = devfn >> 3; -+ pci_addr.s.func = devfn & 0x7; -+ pci_addr.s.reg = reg; -+ -+#if PCI_CONFIG_SPACE_DELAY -+ udelay(PCI_CONFIG_SPACE_DELAY); -+#endif -+ switch (size) { -+ case 4: -+ *val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64)); -+ return PCIBIOS_SUCCESSFUL; -+ case 2: -+ *val = le16_to_cpu(cvmx_read64_uint16(pci_addr.u64)); -+ return PCIBIOS_SUCCESSFUL; -+ case 1: -+ *val = cvmx_read64_uint8(pci_addr.u64); -+ return PCIBIOS_SUCCESSFUL; -+ } -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+} -+ -+ -+/** -+ * Write a value to PCI configuration space -+ * -+ * @bus: -+ * @devfn: -+ * @reg: -+ * @size: -+ * @val: -+ * Returns -+ */ -+static int octeon_write_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ union octeon_pci_address pci_addr; -+ -+ pci_addr.u64 = 0; -+ pci_addr.s.upper = 2; -+ pci_addr.s.io = 1; -+ pci_addr.s.did = 3; -+ pci_addr.s.subdid = 1; -+ pci_addr.s.endian_swap = 1; -+ pci_addr.s.bus = bus->number; -+ pci_addr.s.dev = devfn >> 3; -+ pci_addr.s.func = devfn & 0x7; -+ pci_addr.s.reg = reg; -+ -+#if PCI_CONFIG_SPACE_DELAY -+ udelay(PCI_CONFIG_SPACE_DELAY); -+#endif -+ switch (size) { -+ case 4: -+ cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val)); -+ return PCIBIOS_SUCCESSFUL; -+ case 2: -+ cvmx_write64_uint16(pci_addr.u64, cpu_to_le16(val)); -+ return PCIBIOS_SUCCESSFUL; -+ case 1: -+ cvmx_write64_uint8(pci_addr.u64, val); -+ return PCIBIOS_SUCCESSFUL; -+ } -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+} -+ -+ -+static struct pci_ops octeon_pci_ops = { -+ octeon_read_config, -+ octeon_write_config, -+}; -+ -+static struct resource octeon_pci_mem_resource = { -+ .start = 0, -+ .end = 0, -+ .name = "Octeon PCI MEM", -+ .flags = IORESOURCE_MEM, -+}; -+ -+/* -+ * PCI ports must be above 16KB so the ISA bus filtering in the PCI-X to PCI -+ * bridge -+ */ -+static struct resource octeon_pci_io_resource = { -+ .start = 0x4000, -+ .end = OCTEON_PCI_IOSPACE_SIZE - 1, -+ .name = "Octeon PCI IO", -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct pci_controller octeon_pci_controller = { -+ .pci_ops = &octeon_pci_ops, -+ .mem_resource = &octeon_pci_mem_resource, -+ .mem_offset = OCTEON_PCI_MEMSPACE_OFFSET, -+ .io_resource = &octeon_pci_io_resource, -+ .io_offset = 0, -+ .io_map_base = OCTEON_PCI_IOSPACE_BASE, -+}; -+ -+ -+/** -+ * Low level initialize the Octeon PCI controller -+ * -+ * Returns -+ */ -+static void octeon_pci_initialize(void) -+{ -+ union cvmx_pci_cfg01 cfg01; -+ union cvmx_npi_ctl_status ctl_status; -+ union cvmx_pci_ctl_status_2 ctl_status_2; -+ union cvmx_pci_cfg19 cfg19; -+ union cvmx_pci_cfg16 cfg16; -+ union cvmx_pci_cfg22 cfg22; -+ union cvmx_pci_cfg56 cfg56; -+ -+ /* Reset the PCI Bus */ -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1); -+ cvmx_read_csr(CVMX_CIU_SOFT_PRST); -+ -+ udelay(2000); /* Hold PCI reset for 2 ms */ -+ -+ ctl_status.u64 = 0; /* cvmx_read_csr(CVMX_NPI_CTL_STATUS); */ -+ ctl_status.s.max_word = 1; -+ ctl_status.s.timer = 1; -+ cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64); -+ -+ /* Deassert PCI reset and advertize PCX Host Mode Device Capability -+ (64b) */ -+ cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4); -+ cvmx_read_csr(CVMX_CIU_SOFT_PRST); -+ -+ udelay(2000); /* Wait 2 ms after deasserting PCI reset */ -+ -+ ctl_status_2.u32 = 0; -+ ctl_status_2.s.tsr_hwm = 1; /* Initializes to 0. Must be set -+ before any PCI reads. */ -+ ctl_status_2.s.bar2pres = 1; /* Enable BAR2 */ -+ ctl_status_2.s.bar2_enb = 1; -+ ctl_status_2.s.bar2_cax = 1; /* Don't use L2 */ -+ ctl_status_2.s.bar2_esx = 1; -+ ctl_status_2.s.pmo_amod = 1; /* Round robin priority */ -+ if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { -+ /* BAR1 hole */ -+ ctl_status_2.s.bb1_hole = OCTEON_PCI_BAR1_HOLE_BITS; -+ ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */ -+ ctl_status_2.s.bb_ca = 1; /* Don't use L2 with big bars */ -+ ctl_status_2.s.bb_es = 1; /* Big bar in byte swap mode */ -+ ctl_status_2.s.bb1 = 1; /* BAR1 is big */ -+ ctl_status_2.s.bb0 = 1; /* BAR0 is big */ -+ } -+ -+ octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32); -+ udelay(2000); /* Wait 2 ms before doing PCI reads */ -+ -+ ctl_status_2.u32 = octeon_npi_read32(CVMX_NPI_PCI_CTL_STATUS_2); -+ pr_notice("PCI Status: %s %s-bit\n", -+ ctl_status_2.s.ap_pcix ? "PCI-X" : "PCI", -+ ctl_status_2.s.ap_64ad ? "64" : "32"); -+ -+ if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { -+ union cvmx_pci_cnt_reg cnt_reg_start; -+ union cvmx_pci_cnt_reg cnt_reg_end; -+ unsigned long cycles, pci_clock; -+ -+ cnt_reg_start.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); -+ cycles = read_c0_cvmcount(); -+ udelay(1000); -+ cnt_reg_end.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG); -+ cycles = read_c0_cvmcount() - cycles; -+ pci_clock = (cnt_reg_end.s.pcicnt - cnt_reg_start.s.pcicnt) / -+ (cycles / (mips_hpt_frequency / 1000000)); -+ pr_notice("PCI Clock: %lu MHz\n", pci_clock); -+ } -+ -+ /* -+ * TDOMC must be set to one in PCI mode. TDOMC should be set to 4 -+ * in PCI-X mode to allow four oustanding splits. Otherwise, -+ * should not change from its reset value. Don't write PCI_CFG19 -+ * in PCI mode (0x82000001 reset value), write it to 0x82000004 -+ * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero. -+ * MRBCM -> must be one. -+ */ -+ if (ctl_status_2.s.ap_pcix) { -+ cfg19.u32 = 0; -+ /* -+ * Target Delayed/Split request outstanding maximum -+ * count. [1..31] and 0=32. NOTE: If the user -+ * programs these bits beyond the Designed Maximum -+ * outstanding count, then the designed maximum table -+ * depth will be used instead. No additional -+ * Deferred/Split transactions will be accepted if -+ * this outstanding maximum count is -+ * reached. Furthermore, no additional deferred/split -+ * transactions will be accepted if the I/O delay/ I/O -+ * Split Request outstanding maximum is reached. -+ */ -+ cfg19.s.tdomc = 4; -+ /* -+ * Master Deferred Read Request Outstanding Max Count -+ * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC -+ * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101 -+ * 5 2 110 6 3 111 7 3 For example, if these bits are -+ * programmed to 100, the core can support 2 DAC -+ * cycles, 4 SAC cycles or a combination of 1 DAC and -+ * 2 SAC cycles. NOTE: For the PCI-X maximum -+ * outstanding split transactions, refer to -+ * CRE0[22:20]. -+ */ -+ cfg19.s.mdrrmc = 2; -+ /* -+ * Master Request (Memory Read) Byte Count/Byte Enable -+ * select. 0 = Byte Enables valid. In PCI mode, a -+ * burst transaction cannot be performed using Memory -+ * Read command=4?h6. 1 = DWORD Byte Count valid -+ * (default). In PCI Mode, the memory read byte -+ * enables are automatically generated by the -+ * core. Note: N3 Master Request transaction sizes are -+ * always determined through the -+ * am_attr[<35:32>|<7:0>] field. -+ */ -+ cfg19.s.mrbcm = 1; -+ octeon_npi_write32(CVMX_NPI_PCI_CFG19, cfg19.u32); -+ } -+ -+ -+ cfg01.u32 = 0; -+ cfg01.s.msae = 1; /* Memory Space Access Enable */ -+ cfg01.s.me = 1; /* Master Enable */ -+ cfg01.s.pee = 1; /* PERR# Enable */ -+ cfg01.s.see = 1; /* System Error Enable */ -+ cfg01.s.fbbe = 1; /* Fast Back to Back Transaction Enable */ -+ -+ octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); -+ -+#ifdef USE_OCTEON_INTERNAL_ARBITER -+ /* -+ * When OCTEON is a PCI host, most systems will use OCTEON's -+ * internal arbiter, so must enable it before any PCI/PCI-X -+ * traffic can occur. -+ */ -+ { -+ union cvmx_npi_pci_int_arb_cfg pci_int_arb_cfg; -+ -+ pci_int_arb_cfg.u64 = 0; -+ pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */ -+ cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64); -+ } -+#endif /* USE_OCTEON_INTERNAL_ARBITER */ -+ -+ /* -+ * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, -+ * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to -+ * 1..7. -+ */ -+ cfg16.u32 = 0; -+ cfg16.s.mltd = 1; /* Master Latency Timer Disable */ -+ octeon_npi_write32(CVMX_NPI_PCI_CFG16, cfg16.u32); -+ -+ /* -+ * Should be written to 0x4ff00. MTTV -> must be zero. -+ * FLUSH -> must be 1. MRV -> should be 0xFF. -+ */ -+ cfg22.u32 = 0; -+ /* Master Retry Value [1..255] and 0=infinite */ -+ cfg22.s.mrv = 0xff; -+ /* -+ * AM_DO_FLUSH_I control NOTE: This bit MUST BE ONE for proper -+ * N3K operation. -+ */ -+ cfg22.s.flush = 1; -+ octeon_npi_write32(CVMX_NPI_PCI_CFG22, cfg22.u32); -+ -+ /* -+ * MOST Indicates the maximum number of outstanding splits (in -1 -+ * notation) when OCTEON is in PCI-X mode. PCI-X performance is -+ * affected by the MOST selection. Should generally be written -+ * with one of 0x3be807, 0x2be807, 0x1be807, or 0x0be807, -+ * depending on the desired MOST of 3, 2, 1, or 0, respectively. -+ */ -+ cfg56.u32 = 0; -+ cfg56.s.pxcid = 7; /* RO - PCI-X Capability ID */ -+ cfg56.s.ncp = 0xe8; /* RO - Next Capability Pointer */ -+ cfg56.s.dpere = 1; /* Data Parity Error Recovery Enable */ -+ cfg56.s.roe = 1; /* Relaxed Ordering Enable */ -+ cfg56.s.mmbc = 1; /* Maximum Memory Byte Count -+ [0=512B,1=1024B,2=2048B,3=4096B] */ -+ cfg56.s.most = 3; /* Maximum outstanding Split transactions [0=1 -+ .. 7=32] */ -+ -+ octeon_npi_write32(CVMX_NPI_PCI_CFG56, cfg56.u32); -+ -+ /* -+ * Affects PCI performance when OCTEON services reads to its -+ * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are -+ * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and -+ * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700, -+ * these values need to be changed so they won't possibly prefetch off -+ * of the end of memory if PCI is DMAing a buffer at the end of -+ * memory. Note that these values differ from their reset values. -+ */ -+ octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_6, 0x21); -+ octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_C, 0x31); -+ octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_E, 0x31); -+} -+ -+ -+/** -+ * Initialize the Octeon PCI controller -+ * -+ * Returns -+ */ -+static int __init octeon_pci_setup(void) -+{ -+ union cvmx_npi_mem_access_subidx mem_access; -+ int index; -+ -+ /* Only these chips have PCI */ -+ if (octeon_has_feature(OCTEON_FEATURE_PCIE)) -+ return 0; -+ -+ /* Point pcibios_map_irq() to the PCI version of it */ -+ octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq; -+ -+ /* Only use the big bars on chips that support it */ -+ if (OCTEON_IS_MODEL(OCTEON_CN31XX) || -+ OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || -+ OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1)) -+ octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_SMALL; -+ else -+ octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG; -+ -+ /* PCI I/O and PCI MEM values */ -+ set_io_port_base(OCTEON_PCI_IOSPACE_BASE); -+ ioport_resource.start = 0; -+ ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1; -+ if (!octeon_is_pci_host()) { -+ pr_notice("Not in host mode, PCI Controller not initialized\n"); -+ return 0; -+ } -+ -+ pr_notice("%s Octeon big bar support\n", -+ (octeon_dma_bar_type == -+ OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling"); -+ -+ octeon_pci_initialize(); -+ -+ mem_access.u64 = 0; -+ mem_access.s.esr = 1; /* Endian-Swap on read. */ -+ mem_access.s.esw = 1; /* Endian-Swap on write. */ -+ mem_access.s.nsr = 0; /* No-Snoop on read. */ -+ mem_access.s.nsw = 0; /* No-Snoop on write. */ -+ mem_access.s.ror = 0; /* Relax Read on read. */ -+ mem_access.s.row = 0; /* Relax Order on write. */ -+ mem_access.s.ba = 0; /* PCI Address bits [63:36]. */ -+ cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, mem_access.u64); -+ -+ /* -+ * Remap the Octeon BAR 2 above all 32 bit devices -+ * (0x8000000000ul). This is done here so it is remapped -+ * before the readl()'s below. We don't want BAR2 overlapping -+ * with BAR0/BAR1 during these reads. -+ */ -+ octeon_npi_write32(CVMX_NPI_PCI_CFG08, 0); -+ octeon_npi_write32(CVMX_NPI_PCI_CFG09, 0x80); -+ -+ /* Disable the BAR1 movable mappings */ -+ for (index = 0; index < 32; index++) -+ octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); -+ -+ if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) { -+ /* Remap the Octeon BAR 0 to 0-2GB */ -+ octeon_npi_write32(CVMX_NPI_PCI_CFG04, 0); -+ octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); -+ -+ /* -+ * Remap the Octeon BAR 1 to map 2GB-4GB (minus the -+ * BAR 1 hole). -+ */ -+ octeon_npi_write32(CVMX_NPI_PCI_CFG06, 2ul << 30); -+ octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); -+ -+ /* Devices go after BAR1 */ -+ octeon_pci_mem_resource.start = -+ OCTEON_PCI_MEMSPACE_OFFSET + (4ul << 30) - -+ (OCTEON_PCI_BAR1_HOLE_SIZE << 20); -+ octeon_pci_mem_resource.end = -+ octeon_pci_mem_resource.start + (1ul << 30); -+ } else { -+ /* Remap the Octeon BAR 0 to map 128MB-(128MB+4KB) */ -+ octeon_npi_write32(CVMX_NPI_PCI_CFG04, 128ul << 20); -+ octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0); -+ -+ /* Remap the Octeon BAR 1 to map 0-128MB */ -+ octeon_npi_write32(CVMX_NPI_PCI_CFG06, 0); -+ octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0); -+ -+ /* Devices go after BAR0 */ -+ octeon_pci_mem_resource.start = -+ OCTEON_PCI_MEMSPACE_OFFSET + (128ul << 20) + -+ (4ul << 10); -+ octeon_pci_mem_resource.end = -+ octeon_pci_mem_resource.start + (1ul << 30); -+ } -+ -+ register_pci_controller(&octeon_pci_controller); -+ -+ /* -+ * Clear any errors that might be pending from before the bus -+ * was setup properly. -+ */ -+ cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, -1); -+ return 0; -+} -+ -+arch_initcall(octeon_pci_setup); ---- /dev/null -+++ b/arch/mips/cavium-octeon/pcie.c -@@ -0,0 +1,441 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2007, 2008 Cavium Networks -+ */ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/pci.h> -+#include <linux/interrupt.h> -+#include <linux/time.h> -+#include <linux/delay.h> -+ -+#include <asm/octeon/octeon.h> -+#include <asm/octeon/cvmx-pcie.h> -+#include <asm/octeon/cvmx-npei-defs.h> -+#include <asm/octeon/cvmx-pexp-defs.h> -+ -+#include "pci-common.h" -+ -+/** -+ * Map a PCI device to the appropriate interrupt line -+ * -+ * @param dev The Linux PCI device structure for the device to map -+ * @param slot The slot number for this device on __BUS 0__. Linux -+ * enumerates through all the bridges and figures out the -+ * slot on Bus 0 where this device eventually hooks to. -+ * @param pin The PCI interrupt pin read from the device, then swizzled -+ * as it goes through each bridge. -+ * @return Interrupt number for the device -+ */ -+int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, -+ u8 slot, u8 pin) -+{ -+ /* -+ * The EBH5600 board with the PCI to PCIe bridge mistakenly -+ * wires the first slot for both device id 2 and interrupt -+ * A. According to the PCI spec, device id 2 should be C. The -+ * following kludge attempts to fix this. -+ */ -+ if (strstr(octeon_board_type_string(), "EBH5600") && -+ dev->bus && dev->bus->parent) { -+ /* -+ * Iterate all the way up the device chain and find -+ * the root bus. -+ */ -+ while (dev->bus && dev->bus->parent) -+ dev = to_pci_dev(dev->bus->bridge); -+ /* If the root bus is number 0 and the PEX 8114 is the -+ * root, assume we are behind the miswired bus. We -+ * need to correct the swizzle level by two. Yuck. -+ */ -+ if ((dev->bus->number == 0) && -+ (dev->vendor == 0x10b5) && (dev->device == 0x8114)) { -+ /* -+ * The pin field is one based, not zero. We -+ * need to swizzle it by minus two. -+ */ -+ pin = ((pin - 3) & 3) + 1; -+ } -+ } -+ /* -+ * The -1 is because pin starts with one, not zero. It might -+ * be that this equation needs to include the slot number, but -+ * I don't have hardware to check that against. -+ */ -+ return pin - 1 + OCTEON_IRQ_PCI_INT0; -+} -+ -+/** -+ * Read a value from configuration space -+ * -+ * @param bus -+ * @param devfn -+ * @param reg -+ * @param size -+ * @param val -+ * @return -+ */ -+static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, -+ unsigned int devfn, int reg, int size, -+ u32 *val) -+{ -+ union octeon_cvmemctl cvmmemctl; -+ union octeon_cvmemctl cvmmemctl_save; -+ int bus_number = bus->number; -+ -+ /* -+ * We need to force the bus number to be zero on the root -+ * bus. Linux numbers the 2nd root bus to start after all -+ * buses on root 0. -+ */ -+ if (bus->parent == NULL) -+ bus_number = 0; -+ -+ /* -+ * PCIe only has a single device connected to Octeon. It is -+ * always device ID 0. Don't bother doing reads for other -+ * device IDs on the first segment. -+ */ -+ if ((bus_number == 0) && (devfn >> 3 != 0)) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+ -+ /* -+ * The following is a workaround for the CN57XX, CN56XX, -+ * CN55XX, and CN54XX errata with PCIe config reads from non -+ * existent devices. These chips will hang the PCIe link if a -+ * config read is performed that causes a UR response. -+ */ -+ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || -+ OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) { -+ /* -+ * For our EBH5600 board, port 0 has a bridge with two -+ * PCI-X slots. We need a new special checks to make -+ * sure we only probe valid stuff. The PCIe->PCI-X -+ * bridge only respondes to device ID 0, function -+ * 0-1 -+ */ -+ if ((bus_number == 0) && (devfn >= 2)) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+ /* -+ * The PCI-X slots are device ID 2,3. Choose one of -+ * the below "if" blocks based on what is plugged into -+ * the board. -+ */ -+#if 1 -+ /* Use this option if you aren't using either slot */ -+ if (bus_number == 1) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+#elif 0 -+ /* -+ * Use this option if you are using the first slot but -+ * not the second. -+ */ -+ if ((bus_number == 1) && (devfn >> 3 != 2)) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+#elif 0 -+ /* -+ * Use this option if you are using the second slot -+ * but not the first. -+ */ -+ if ((bus_number == 1) && (devfn >> 3 != 3)) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+#elif 0 -+ /* Use this opion if you are using both slots */ -+ if ((bus_number == 1) && -+ !((devfn == (2 << 3)) || (devfn == (3 << 3)))) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+#endif -+ -+ /* -+ * The following #if gives a more complicated -+ * example. This is the required checks for running a -+ * Nitrox CN16XX-NHBX in the slot of the EBH5600. This -+ * card has a PLX PCIe bridge with four Nitrox PLX -+ * parts behind it. -+ */ -+#if 0 -+ /* PLX bridge with 4 ports */ -+ if ((bus_number == 3) && -+ !((devfn >> 3 >= 1) && (devfn >> 3 <= 4))) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+ /* Nitrox behind PLX 1 */ -+ if ((bus_number == 4) && (devfn >> 3 != 0)) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+ /* Nitrox behind PLX 2 */ -+ if ((bus_number == 5) && (devfn >> 3 != 0)) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+ /* Nitrox behind PLX 3 */ -+ if ((bus_number == 6) && (devfn >> 3 != 0)) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+ /* Nitrox behind PLX 4 */ -+ if ((bus_number == 7) && (devfn >> 3 != 0)) -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+#endif -+ /* -+ * Shorten the DID timeout so bus errors for PCIe -+ * config reads from non existent devices happen -+ * faster. This allows us to continue booting even if -+ * the above "if" checks are wrong. Once one of these -+ * errors happens, the PCIe port is dead. -+ */ -+ cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7); -+ cvmmemctl.u64 = cvmmemctl_save.u64; -+ cvmmemctl.s.didtto = 2; -+ __write_64bit_c0_register($11, 7, cvmmemctl.u64); -+ } -+ -+ switch (size) { -+ case 4: -+ *val = cvmx_pcie_config_read32(pcie_port, bus_number, -+ devfn >> 3, devfn & 0x7, reg); -+ break; -+ case 2: -+ *val = cvmx_pcie_config_read16(pcie_port, bus_number, -+ devfn >> 3, devfn & 0x7, reg); -+ break; -+ case 1: -+ *val = cvmx_pcie_config_read8(pcie_port, bus_number, devfn >> 3, -+ devfn & 0x7, reg); -+ break; -+ default: -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+ } -+ -+ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || -+ OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) -+ __write_64bit_c0_register($11, 7, cvmmemctl_save.u64); -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ return octeon_pcie_read_config(0, bus, devfn, reg, size, val); -+} -+ -+static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ return octeon_pcie_read_config(1, bus, devfn, reg, size, val); -+} -+ -+ -+ -+/** -+ * Write a value to PCI configuration space -+ * -+ * @param bus -+ * @param devfn -+ * @param reg -+ * @param size -+ * @param val -+ * @return -+ */ -+static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus, -+ unsigned int devfn, int reg, -+ int size, u32 val) -+{ -+ int bus_number = bus->number; -+ /* -+ * We need to force the bus number to be zero on the root -+ * bus. Linux numbers the 2nd root bus to start after all -+ * busses on root 0. -+ */ -+ if (bus->parent == NULL) -+ bus_number = 0; -+ -+ switch (size) { -+ case 4: -+ cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3, -+ devfn & 0x7, reg, val); -+ return PCIBIOS_SUCCESSFUL; -+ case 2: -+ cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3, -+ devfn & 0x7, reg, val); -+ return PCIBIOS_SUCCESSFUL; -+ case 1: -+ cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3, -+ devfn & 0x7, reg, val); -+ return PCIBIOS_SUCCESSFUL; -+ } -+#if PCI_CONFIG_SPACE_DELAY -+ udelay(PCI_CONFIG_SPACE_DELAY); -+#endif -+ return PCIBIOS_FUNC_NOT_SUPPORTED; -+} -+ -+static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ return octeon_pcie_write_config(0, bus, devfn, reg, size, val); -+} -+ -+static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ return octeon_pcie_write_config(1, bus, devfn, reg, size, val); -+} -+ -+static struct pci_ops octeon_pcie0_ops = { -+ octeon_pcie0_read_config, -+ octeon_pcie0_write_config, -+}; -+ -+static struct resource octeon_pcie0_mem_resource = { -+ .name = "Octeon PCIe0 MEM", -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource octeon_pcie0_io_resource = { -+ .name = "Octeon PCIe0 IO", -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct pci_controller octeon_pcie0_controller = { -+ .pci_ops = &octeon_pcie0_ops, -+ .mem_resource = &octeon_pcie0_mem_resource, -+ .io_resource = &octeon_pcie0_io_resource, -+}; -+ -+static struct pci_ops octeon_pcie1_ops = { -+ octeon_pcie1_read_config, -+ octeon_pcie1_write_config, -+}; -+ -+static struct resource octeon_pcie1_mem_resource = { -+ .name = "Octeon PCIe1 MEM", -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource octeon_pcie1_io_resource = { -+ .name = "Octeon PCIe1 IO", -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct pci_controller octeon_pcie1_controller = { -+ .pci_ops = &octeon_pcie1_ops, -+ .mem_resource = &octeon_pcie1_mem_resource, -+ .io_resource = &octeon_pcie1_io_resource, -+}; -+ -+ -+/** -+ * Initialize the Octeon PCIe controllers -+ * -+ * @return -+ */ -+static int __init octeon_pcie_setup(void) -+{ -+ union cvmx_npei_ctl_status npei_ctl_status; -+ int result; -+ -+ /* These chips don't have PCIe */ -+ if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) -+ return 0; -+ -+ /* Point pcibios_map_irq() to the PCIe version of it */ -+ octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq; -+ -+ /* Use the PCIe based DMA mappings */ -+ octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE; -+ -+ /* -+ * PCIe I/O range. It is based on port 0 but includes up until -+ * port 1's end. -+ */ -+ set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0))); -+ ioport_resource.start = 0; -+ ioport_resource.end = -+ cvmx_pcie_get_io_base_address(1) - -+ cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1; -+ -+ npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); -+ if (npei_ctl_status.s.host_mode) { -+ pr_notice("PCIe: Initializing port 0\n"); -+ result = cvmx_pcie_rc_initialize(0); -+ if (result == 0) { -+ /* Memory offsets are physical addresses */ -+ octeon_pcie0_controller.mem_offset = -+ cvmx_pcie_get_mem_base_address(0); -+ /* IO offsets are Mips virtual addresses */ -+ octeon_pcie0_controller.io_map_base = -+ CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address -+ (0)); -+ octeon_pcie0_controller.io_offset = 0; -+ /* -+ * To keep things similar to PCI, we start -+ * device addresses at the same place as PCI -+ * uisng big bar support. This normally -+ * translates to 4GB-256MB, which is the same -+ * as most x86 PCs. -+ */ -+ octeon_pcie0_controller.mem_resource->start = -+ cvmx_pcie_get_mem_base_address(0) + -+ (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); -+ octeon_pcie0_controller.mem_resource->end = -+ cvmx_pcie_get_mem_base_address(0) + -+ cvmx_pcie_get_mem_size(0) - 1; -+ /* -+ * Ports must be above 16KB for the ISA bus -+ * filtering in the PCI-X to PCI bridge. -+ */ -+ octeon_pcie0_controller.io_resource->start = 4 << 10; -+ octeon_pcie0_controller.io_resource->end = -+ cvmx_pcie_get_io_size(0) - 1; -+ register_pci_controller(&octeon_pcie0_controller); -+ } -+ } else { -+ pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n"); -+ } -+ -+ /* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */ -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { -+ union cvmx_npei_dbg_data npei_dbg_data; -+ npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); -+ if (npei_dbg_data.cn52xx.qlm0_link_width) -+ return 0; -+ } -+ -+ pr_notice("PCIe: Initializing port 1\n"); -+ result = cvmx_pcie_rc_initialize(1); -+ if (result == 0) { -+ /* Memory offsets are physical addresses */ -+ octeon_pcie1_controller.mem_offset = -+ cvmx_pcie_get_mem_base_address(1); -+ /* IO offsets are Mips virtual addresses */ -+ octeon_pcie1_controller.io_map_base = -+ CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(1)); -+ octeon_pcie1_controller.io_offset = -+ cvmx_pcie_get_io_base_address(1) - -+ cvmx_pcie_get_io_base_address(0); -+ /* -+ * To keep things similar to PCI, we start device -+ * addresses at the same place as PCI uisng big bar -+ * support. This normally translates to 4GB-256MB, -+ * which is the same as most x86 PCs. -+ */ -+ octeon_pcie1_controller.mem_resource->start = -+ cvmx_pcie_get_mem_base_address(1) + (4ul << 30) - -+ (OCTEON_PCI_BAR1_HOLE_SIZE << 20); -+ octeon_pcie1_controller.mem_resource->end = -+ cvmx_pcie_get_mem_base_address(1) + -+ cvmx_pcie_get_mem_size(1) - 1; -+ /* -+ * Ports must be above 16KB for the ISA bus filtering -+ * in the PCI-X to PCI bridge. -+ */ -+ octeon_pcie1_controller.io_resource->start = -+ cvmx_pcie_get_io_base_address(1) - -+ cvmx_pcie_get_io_base_address(0); -+ octeon_pcie1_controller.io_resource->end = -+ octeon_pcie1_controller.io_resource->start + -+ cvmx_pcie_get_io_size(1) - 1; -+ register_pci_controller(&octeon_pcie1_controller); -+ } -+ return 0; -+} -+ -+arch_initcall(octeon_pcie_setup); ---- a/arch/mips/include/asm/octeon/cvmx-asm.h -+++ b/arch/mips/include/asm/octeon/cvmx-asm.h -@@ -119,7 +119,8 @@ - asm ("pop %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input)) - #define CVMX_DPOP(result, input) \ - asm ("dpop %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input)) -- -+#define CVMX_CLZ(result, input) \ -+ asm ("clz %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input)) - /* some new cop0-like stuff */ - #define CVMX_RDHWR(result, regstr) \ - asm volatile ("rdhwr %[rt],$" CVMX_TMP_STR(regstr) : [rt] "=d" (result)) ---- /dev/null -+++ b/arch/mips/include/asm/octeon/cvmx-helper-errata.h -@@ -0,0 +1,92 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * @file -+ * -+ * Fixes and workaround for Octeon chip errata. This file -+ * contains functions called by cvmx-helper to workaround known -+ * chip errata. For the most part, code doesn't need to call -+ * these functions directly. -+ * -+ */ -+#ifndef __CVMX_HELPER_ERRATA_H__ -+#define __CVMX_HELPER_ERRATA_H__ -+ -+ -+#include "cvmx-wqe.h" -+ -+/** -+ * @INTERNAL -+ * Function to adjust internal IPD pointer alignments -+ * -+ * Returns 0 on success -+ * !0 on failure -+ */ -+extern int __cvmx_helper_errata_fix_ipd_ptr_alignment(void); -+ -+/** -+ * @INTERNAL -+ * Workaround ASX setup errata with CN38XX pass1 -+ * -+ * @interface: Interface to setup -+ * @port: Port to setup (0..3) -+ * @cpu_clock_hz: -+ * Chip frequency in Hertz -+ * -+ * Returns Zero on success, negative on failure -+ */ -+extern int __cvmx_helper_errata_asx_pass1(int interface, int port, -+ int cpu_clock_hz); -+ -+/** -+ * This function needs to be called on all Octeon chips with -+ * errata PKI-100. -+ * -+ * The Size field is 8 too large in WQE and next pointers -+ * -+ * The Size field generated by IPD is 8 larger than it should -+ * be. The Size field is <55:40> of both: -+ * - WORD3 in the work queue entry, and -+ * - the next buffer pointer (which precedes the packet data -+ * in each buffer). -+ * -+ * @work: Work queue entry to fix -+ * Returns Zero on success. Negative on failure -+ */ -+extern int cvmx_helper_fix_ipd_packet_chain(struct cvmx_wqe *work); -+ -+/** -+ * Due to errata G-720, the 2nd order CDR circuit on CN52XX pass -+ * 1 doesn't work properly. The following code disables 2nd order -+ * CDR for the specified QLM. -+ * -+ * @qlm: QLM to disable 2nd order CDR for. -+ */ -+extern void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm); -+ -+#endif ---- /dev/null -+++ b/arch/mips/include/asm/octeon/cvmx-helper-util.h -@@ -0,0 +1,266 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * -+ * Small helper utilities. -+ * -+ */ -+ -+#ifndef __CVMX_HELPER_UTIL_H__ -+#define __CVMX_HELPER_UTIL_H__ -+ -+#ifdef CVMX_ENABLE_HELPER_FUNCTIONS -+ -+/** -+ * Convert a interface mode into a human readable string -+ * -+ * @mode: Mode to convert -+ * -+ * Returns String -+ */ -+extern const char -+ *cvmx_helper_interface_mode_to_string(cvmx_helper_interface_mode_t mode); -+ -+/** -+ * Debug routine to dump the packet structure to the console -+ * -+ * @work: Work queue entry containing the packet to dump -+ * Returns -+ */ -+extern int cvmx_helper_dump_packet(cvmx_wqe_t *work); -+ -+/** -+ * Setup Random Early Drop on a specific input queue -+ * -+ * @queue: Input queue to setup RED on (0-7) -+ * @pass_thresh: -+ * Packets will begin slowly dropping when there are less than -+ * this many packet buffers free in FPA 0. -+ * @drop_thresh: -+ * All incomming packets will be dropped when there are less -+ * than this many free packet buffers in FPA 0. -+ * Returns Zero on success. Negative on failure -+ */ -+extern int cvmx_helper_setup_red_queue(int queue, int pass_thresh, -+ int drop_thresh); -+ -+/** -+ * Setup Random Early Drop to automatically begin dropping packets. -+ * -+ * @pass_thresh: -+ * Packets will begin slowly dropping when there are less than -+ * this many packet buffers free in FPA 0. -+ * @drop_thresh: -+ * All incomming packets will be dropped when there are less -+ * than this many free packet buffers in FPA 0. -+ * Returns Zero on success. Negative on failure -+ */ -+extern int cvmx_helper_setup_red(int pass_thresh, int drop_thresh); -+ -+/** -+ * Get the version of the CVMX libraries. -+ * -+ * Returns Version string. Note this buffer is allocated statically -+ * and will be shared by all callers. -+ */ -+extern const char *cvmx_helper_get_version(void); -+ -+/** -+ * @INTERNAL -+ * Setup the common GMX settings that determine the number of -+ * ports. These setting apply to almost all configurations of all -+ * chips. -+ * -+ * @interface: Interface to configure -+ * @num_ports: Number of ports on the interface -+ * -+ * Returns Zero on success, negative on failure -+ */ -+extern int __cvmx_helper_setup_gmx(int interface, int num_ports); -+ -+/** -+ * Returns the IPD/PKO port number for a port on the given -+ * interface. -+ * -+ * @interface: Interface to use -+ * @port: Port on the interface -+ * -+ * Returns IPD/PKO port number -+ */ -+extern int cvmx_helper_get_ipd_port(int interface, int port); -+ -+/** -+ * Returns the IPD/PKO port number for the first port on the given -+ * interface. -+ * -+ * @interface: Interface to use -+ * -+ * Returns IPD/PKO port number -+ */ -+static inline int cvmx_helper_get_first_ipd_port(int interface) -+{ -+ return cvmx_helper_get_ipd_port(interface, 0); -+} -+ -+/** -+ * Returns the IPD/PKO port number for the last port on the given -+ * interface. -+ * -+ * @interface: Interface to use -+ * -+ * Returns IPD/PKO port number -+ */ -+static inline int cvmx_helper_get_last_ipd_port(int interface) -+{ -+ extern int cvmx_helper_ports_on_interface(int interface); -+ -+ return cvmx_helper_get_first_ipd_port(interface) + -+ cvmx_helper_ports_on_interface(interface) - 1; -+} -+ -+/** -+ * Free the packet buffers contained in a work queue entry. -+ * The work queue entry is not freed. -+ * -+ * @work: Work queue entry with packet to free -+ */ -+static inline void cvmx_helper_free_packet_data(cvmx_wqe_t *work) -+{ -+ uint64_t number_buffers; -+ cvmx_buf_ptr_t buffer_ptr; -+ cvmx_buf_ptr_t next_buffer_ptr; -+ uint64_t start_of_buffer; -+ -+ number_buffers = work->word2.s.bufs; -+ if (number_buffers == 0) -+ return; -+ buffer_ptr = work->packet_ptr; -+ -+ /* -+ * Since the number of buffers is not zero, we know this is -+ * not a dynamic short packet. We need to check if it is a -+ * packet received with IPD_CTL_STATUS[NO_WPTR]. If this is -+ * true, we need to free all buffers except for the first -+ * one. The caller doesn't expect their WQE pointer to be -+ * freed. -+ */ -+ start_of_buffer = ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7; -+ if (cvmx_ptr_to_phys(work) == start_of_buffer) { -+ next_buffer_ptr = -+ *(cvmx_buf_ptr_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr - 8); -+ buffer_ptr = next_buffer_ptr; -+ number_buffers--; -+ } -+ -+ while (number_buffers--) { -+ /* -+ * Remember the back pointer is in cache lines, not -+ * 64bit words. -+ */ -+ start_of_buffer = -+ ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7; -+ /* -+ * Read pointer to next buffer before we free the -+ * current buffer. -+ */ -+ next_buffer_ptr = -+ *(cvmx_buf_ptr_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr - 8); -+ cvmx_fpa_free(cvmx_phys_to_ptr(start_of_buffer), -+ buffer_ptr.s.pool, 0); -+ buffer_ptr = next_buffer_ptr; -+ } -+} -+ -+#endif /* CVMX_ENABLE_HELPER_FUNCTIONS */ -+ -+/** -+ * Returns the interface number for an IPD/PKO port number. -+ * -+ * @ipd_port: IPD/PKO port number -+ * -+ * Returns Interface number -+ */ -+extern int cvmx_helper_get_interface_num(int ipd_port); -+ -+/** -+ * Returns the interface index number for an IPD/PKO port -+ * number. -+ * -+ * @ipd_port: IPD/PKO port number -+ * -+ * Returns Interface index number -+ */ -+extern int cvmx_helper_get_interface_index_num(int ipd_port); -+ -+/** -+ * Initialize the internal QLM JTAG logic to allow programming -+ * of the JTAG chain by the cvmx_helper_qlm_jtag_*() functions. -+ * These functions should only be used at the direction of Cavium -+ * Networks. Programming incorrect values into the JTAG chain -+ * can cause chip damage. -+ */ -+extern void cvmx_helper_qlm_jtag_init(void); -+ -+/** -+ * Write up to 32bits into the QLM jtag chain. Bits are shifted -+ * into the MSB and out the LSB, so you should shift in the low -+ * order bits followed by the high order bits. The JTAG chain is -+ * 4 * 268 bits long, or 1072. -+ * -+ * @qlm: QLM to shift value into -+ * @bits: Number of bits to shift in (1-32). -+ * @data: Data to shift in. Bit 0 enters the chain first, followed by -+ * bit 1, etc. -+ * -+ * Returns The low order bits of the JTAG chain that shifted out of the -+ * circle. -+ */ -+extern uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data); -+ -+/** -+ * Shift long sequences of zeros into the QLM JTAG chain. It is -+ * common to need to shift more than 32 bits of zeros into the -+ * chain. This function is a convience wrapper around -+ * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of -+ * zeros at a time. -+ * -+ * @qlm: QLM to shift zeros into -+ * @bits: -+ */ -+extern void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits); -+ -+/** -+ * Program the QLM JTAG chain into all lanes of the QLM. You must -+ * have already shifted in 268*4, or 1072 bits into the JTAG -+ * chain. Updating invalid values can possibly cause chip damage. -+ * -+ * @qlm: QLM to program -+ */ -+extern void cvmx_helper_qlm_jtag_update(int qlm); -+ -+#endif /* __CVMX_HELPER_H__ */ ---- a/arch/mips/include/asm/octeon/cvmx-packet.h -+++ b/arch/mips/include/asm/octeon/cvmx-packet.h -@@ -25,7 +25,8 @@ - * Contact Cavium Networks for more information - ***********************license end**************************************/ - --/* -+/** -+ * - * Packet buffer defines. - */ - -@@ -39,18 +40,23 @@ union cvmx_buf_ptr { - void *ptr; - uint64_t u64; - struct { -- /* if set, invert the "free" pick of the overall -+ /* -+ * If set, invert the "free" pick of the overall - * packet. HW always sets this bit to 0 on inbound -- * packet */ -+ * packet. -+ */ - uint64_t i:1; - -- /* Indicates the amount to back up to get to the -+ /* -+ * Indicates the amount to back up to get to the - * buffer start in cache lines. In most cases this is - * less than one complete cache line, so the value is -- * zero */ -+ * zero. -+ */ - uint64_t back:4; - /* The pool that the buffer came from / goes to */ - uint64_t pool:3; -+ - /* The size of the segment pointed to by addr (in bytes) */ - uint64_t size:16; - /* Pointer to the first byte of the data, NOT buffer */ ---- /dev/null -+++ b/arch/mips/include/asm/octeon/cvmx-pcie.h -@@ -0,0 +1,284 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * @file -+ * -+ * Interface to PCIe as a host(RC) or target(EP) -+ * -+ */ -+ -+#ifndef __CVMX_PCIE_H__ -+#define __CVMX_PCIE_H__ -+ -+union cvmx_pcie_address { -+ uint64_t u64; -+ struct { -+ uint64_t upper:2; /* Normally 2 for XKPHYS */ -+ uint64_t reserved_49_61:13; /* Must be zero */ -+ uint64_t io:1; /* 1 for IO space access */ -+ uint64_t did:5; /* PCIe DID = 3 */ -+ uint64_t subdid:3; /* PCIe SubDID = 1 */ -+ uint64_t reserved_36_39:4; /* Must be zero */ -+ uint64_t es:2; /* Endian swap = 1 */ -+ uint64_t port:2; /* PCIe port 0,1 */ -+ uint64_t reserved_29_31:3; /* Must be zero */ -+ /* -+ * Selects the type of the configuration request (0 = type 0, -+ * 1 = type 1). -+ */ -+ uint64_t ty:1; -+ /* Target bus number sent in the ID in the request. */ -+ uint64_t bus:8; -+ /* -+ * Target device number sent in the ID in the -+ * request. Note that Dev must be zero for type 0 -+ * configuration requests. -+ */ -+ uint64_t dev:5; -+ /* Target function number sent in the ID in the request. */ -+ uint64_t func:3; -+ /* -+ * Selects a register in the configuration space of -+ * the target. -+ */ -+ uint64_t reg:12; -+ } config; -+ struct { -+ uint64_t upper:2; /* Normally 2 for XKPHYS */ -+ uint64_t reserved_49_61:13; /* Must be zero */ -+ uint64_t io:1; /* 1 for IO space access */ -+ uint64_t did:5; /* PCIe DID = 3 */ -+ uint64_t subdid:3; /* PCIe SubDID = 2 */ -+ uint64_t reserved_36_39:4; /* Must be zero */ -+ uint64_t es:2; /* Endian swap = 1 */ -+ uint64_t port:2; /* PCIe port 0,1 */ -+ uint64_t address:32; /* PCIe IO address */ -+ } io; -+ struct { -+ uint64_t upper:2; /* Normally 2 for XKPHYS */ -+ uint64_t reserved_49_61:13; /* Must be zero */ -+ uint64_t io:1; /* 1 for IO space access */ -+ uint64_t did:5; /* PCIe DID = 3 */ -+ uint64_t subdid:3; /* PCIe SubDID = 3-6 */ -+ uint64_t reserved_36_39:4; /* Must be zero */ -+ uint64_t address:36; /* PCIe Mem address */ -+ } mem; -+}; -+ -+/** -+ * Return the Core virtual base address for PCIe IO access. IOs are -+ * read/written as an offset from this address. -+ * -+ * @pcie_port: PCIe port the IO is for -+ * -+ * Returns 64bit Octeon IO base address for read/write -+ */ -+uint64_t cvmx_pcie_get_io_base_address(int pcie_port); -+ -+/** -+ * Size of the IO address region returned at address -+ * cvmx_pcie_get_io_base_address() -+ * -+ * @pcie_port: PCIe port the IO is for -+ * -+ * Returns Size of the IO window -+ */ -+uint64_t cvmx_pcie_get_io_size(int pcie_port); -+ -+/** -+ * Return the Core virtual base address for PCIe MEM access. Memory is -+ * read/written as an offset from this address. -+ * -+ * @pcie_port: PCIe port the IO is for -+ * -+ * Returns 64bit Octeon IO base address for read/write -+ */ -+uint64_t cvmx_pcie_get_mem_base_address(int pcie_port); -+ -+/** -+ * Size of the Mem address region returned at address -+ * cvmx_pcie_get_mem_base_address() -+ * -+ * @pcie_port: PCIe port the IO is for -+ * -+ * Returns Size of the Mem window -+ */ -+uint64_t cvmx_pcie_get_mem_size(int pcie_port); -+ -+/** -+ * Initialize a PCIe port for use in host(RC) mode. It doesn't -+ * enumerate the bus. -+ * -+ * @pcie_port: PCIe port to initialize -+ * -+ * Returns Zero on success -+ */ -+int cvmx_pcie_rc_initialize(int pcie_port); -+ -+/** -+ * Shutdown a PCIe port and put it in reset -+ * -+ * @pcie_port: PCIe port to shutdown -+ * -+ * Returns Zero on success -+ */ -+int cvmx_pcie_rc_shutdown(int pcie_port); -+ -+/** -+ * Read 8bits from a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * -+ * Returns Result of the read -+ */ -+uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, int fn, -+ int reg); -+ -+/** -+ * Read 16bits from a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * -+ * Returns Result of the read -+ */ -+uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, int fn, -+ int reg); -+ -+/** -+ * Read 32bits from a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * -+ * Returns Result of the read -+ */ -+uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, int fn, -+ int reg); -+ -+/** -+ * Write 8bits to a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * @val: Value to write -+ */ -+void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn, int reg, -+ uint8_t val); -+ -+/** -+ * Write 16bits to a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * @val: Value to write -+ */ -+void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn, int reg, -+ uint16_t val); -+ -+/** -+ * Write 32bits to a Device's config space -+ * -+ * @pcie_port: PCIe port the device is on -+ * @bus: Sub bus -+ * @dev: Device ID -+ * @fn: Device sub function -+ * @reg: Register to access -+ * @val: Value to write -+ */ -+void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, int reg, -+ uint32_t val); -+ -+/** -+ * Read a PCIe config space register indirectly. This is used for -+ * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. -+ * -+ * @pcie_port: PCIe port to read from -+ * @cfg_offset: Address to read -+ * -+ * Returns Value read -+ */ -+uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset); -+ -+/** -+ * Write a PCIe config space register indirectly. This is used for -+ * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. -+ * -+ * @pcie_port: PCIe port to write to -+ * @cfg_offset: Address to write -+ * @val: Value to write -+ */ -+void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, uint32_t val); -+ -+/** -+ * Write a 32bit value to the Octeon NPEI register space -+ * -+ * @address: Address to write to -+ * @val: Value to write -+ */ -+static inline void cvmx_pcie_npei_write32(uint64_t address, uint32_t val) -+{ -+ cvmx_write64_uint32(address ^ 4, val); -+ cvmx_read64_uint32(address ^ 4); -+} -+ -+/** -+ * Read a 32bit value from the Octeon NPEI register space -+ * -+ * @address: Address to read -+ * Returns The result -+ */ -+static inline uint32_t cvmx_pcie_npei_read32(uint64_t address) -+{ -+ return cvmx_read64_uint32(address ^ 4); -+} -+ -+/** -+ * Initialize a PCIe port for use in target(EP) mode. -+ * -+ * Returns Zero on success -+ */ -+int cvmx_pcie_ep_initialize(void); -+ -+#endif ---- /dev/null -+++ b/arch/mips/include/asm/octeon/cvmx-wqe.h -@@ -0,0 +1,422 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * -+ * This header file defines the work queue entry (wqe) data structure. -+ * Since this is a commonly used structure that depends on structures -+ * from several hardware blocks, those definitions have been placed -+ * in this file to create a single point of definition of the wqe -+ * format. -+ * -+ * Data structures are still named according to the block that they -+ * relate to. -+ * -+ */ -+ -+#ifndef __CVMX_WQE_H__ -+#define __CVMX_WQE_H__ -+ -+#include "cvmx-packet.h" -+ -+#define OCT_TAG_TYPE_STRING(x) ( \ -+ { \ -+ const char *r; \ -+ switch (x) { \ -+ case CVMX_POW_TAG_TYPE_ORDERED: \ -+ r = "ORDERED"; \ -+ break; \ -+ case CVMX_POW_TAG_TYPE_ATOMIC: \ -+ r = "ATOMIC"; \ -+ break; \ -+ case CVMX_POW_TAG_TYPE_NULL: \ -+ r = "NULL"; \ -+ break; \ -+ default: \ -+ r = "NULL_NULL"; \ -+ break; \ -+ } \ -+ r; \ -+ }) -+ -+/** -+ * HW decode / err_code in work queue entry -+ */ -+union cvmx_pip_wqe_word2{ -+ uint64_t u64; -+ -+ /* Use this struct if the hardware determines that the packet is IP */ -+ struct { -+ /* HW sets this to the number of buffers used by this packet */ -+ uint64_t bufs:8; -+ /* HW sets to the number of L2 bytes prior to the IP */ -+ uint64_t ip_offset:8; -+ /* Set to 1 if we found VLAN in the L2 */ -+ uint64_t vlan_valid:1; -+ uint64_t unassigned:2; -+ /* HW sets to the VLAN CFI flag (valid when vlan_valid) */ -+ uint64_t vlan_cfi:1; -+ /* HW sets to the VLAN_ID field (valid when vlan_valid) */ -+ uint64_t vlan_id:12; -+ -+ uint64_t unassigned2:12; -+ /* The packet needs to be decompressed */ -+ uint64_t dec_ipcomp:1; -+ /* The packet is either TCP or UDP */ -+ uint64_t tcp_or_udp:1; -+ /* The packet needs to be decrypted (ESP or AH) */ -+ uint64_t dec_ipsec:1; -+ /* The packet is IPv6 */ -+ uint64_t is_v6:1; -+ -+ /* -+ * rcv_error, not_IP, IP_exc, is_frag, L4_error, -+ * software, etc. -+ */ -+ -+ /* -+ * Reserved for software use, hardware will clear on -+ * packet creation. -+ */ -+ uint64_t software:1; -+ /* exceptional conditions below. */ -+ -+ /* -+ * The receive interface hardware detected an L4 error -+ * (only applies if !is_frag) (only applies if -+ * !rcv_error && !not_IP && !IP_exc && !is_frag) -+ * failure indicated in err_code below, decode: -+ * -+ * - 1 = Malformed L4 -+ * -+ * - 2 = L4 Checksum Error: the L4 checksum value is -+ * -+ * - 3 = UDP Length Error: The UDP length field would -+ * make the UDP data longer than what remains in -+ * the IP packet (as defined by the IP header -+ * length field). -+ * -+ * - 4 = Bad L4 Port: either the source or destination -+ * TCP/UDP port is 0. -+ * -+ * - 8 = TCP FIN Only: the packet is TCP and only the -+ * FIN flag set. -+ * -+ * - 9 = TCP No Flags: the packet is TCP and no flags -+ * are set. -+ * -+ * - 10 = TCP FIN RST: the packet is TCP and both FIN -+ * and RST are set. -+ * -+ * - 11 = TCP SYN URG: the packet is TCP and both SYN -+ * and URG are set. -+ * -+ * - 12 = TCP SYN RST: the packet is TCP and both SYN -+ * and RST are set. -+ * -+ * - 13 = TCP SYN FIN: the packet is TCP and both SYN -+ * and FIN are set. -+ * -+ */ -+ uint64_t L4_error:1; -+ /* Set if the packet is a fragment */ -+ uint64_t is_frag:1; -+ -+ /* -+ * The receive interface hardware detected an IP error -+ * / exception (only applies if !rcv_error && !not_IP) -+ * failure indicated in err_code below, decode: -+ * -+ * - 1 = Not IP: the IP version field is neither 4 nor -+ * 6. -+ * -+ * - 2 = IPv4 Header Checksum Error: the IPv4 header -+ * has a checksum violation. -+ * -+ * - 3 = IP Malformed Header: the packet is not long -+ * enough to contain the IP header. -+ * -+ * - 4 = IP Malformed: the packet is not long enough -+ * to contain the bytes indicated by the IP -+ * header. Pad is allowed. -+ * -+ * - 5 = IP TTL Hop: the IPv4 TTL field or the IPv6 -+ * Hop Count field are zero. -+ * -+ * - 6 = IP Options. -+ */ -+ uint64_t IP_exc:1; -+ /* -+ * Set if the hardware determined that the packet is a -+ * broadcast. -+ */ -+ uint64_t is_bcast:1; -+ /* -+ * Set if the hardware determined that the packet is a -+ * multi-cast. -+ */ -+ uint64_t is_mcast:1; -+ /* -+ * Set if the packet may not be IP (must be zero in -+ * this case). -+ */ -+ uint64_t not_IP:1; -+ /* -+ * The receive interface hardware detected a receive -+ * error (must be zero in this case) -+ * -+ * lower err_code = first-level descriptor of the work -+ * -+ * zero for packet submitted by hardware that isn't on -+ * the slow path. -+ */ -+ uint64_t rcv_error:1; -+ -+ /* Type is cvmx_pip_err_t */ -+ uint64_t err_code:8; -+ } s; -+ -+ /* Use this to get at the 16 vlan bits */ -+ struct { -+ uint64_t unused1:16; -+ uint64_t vlan:16; -+ uint64_t unused2:32; -+ } svlan; -+ -+ /* -+ * Use this struct if the hardware could not determine that -+ * the packet is ip. -+ */ -+ struct { -+ /* HW sets this to the number of buffers used by this packet. */ -+ uint64_t bufs:8; -+ uint64_t unused:8; -+ /* Set to 1 if we found VLAN in the L2. */ -+ uint64_t vlan_valid:1; -+ uint64_t unassigned:2; -+ /* HW sets to the VLAN CFI flag (valid when vlan_valid). */ -+ uint64_t vlan_cfi:1; -+ /* HW sets to the VLAN_ID field (valid when vlan_valid). */ -+ uint64_t vlan_id:12; -+ -+ uint64_t unassigned2:16; -+ /* -+ * Reserved for software use, hardware will clear on -+ * packet creation. -+ */ -+ uint64_t software:1; -+ uint64_t unassigned3:1; -+ /* Set if the hardware determined that the packet is rarp. */ -+ uint64_t is_rarp:1; -+ /* Set if the hardware determined that the packet is arp. */ -+ uint64_t is_arp:1; -+ /* -+ * Set if the hardware determined that the packet is a -+ * broadcast. -+ */ -+ uint64_t is_bcast:1; -+ /* -+ * Set if the hardware determined that the packet is a -+ * multi-cast. -+ */ -+ uint64_t is_mcast:1; -+ /* -+ * Set if the packet may not be IP (must be one in -+ * this case). -+ */ -+ uint64_t not_IP:1; -+ /* -+ * The receive interface hardware detected a receive -+ * error. Failure indicated in err_code below, decode: -+ * -+ * - 1 = partial error: a packet was partially -+ * received, but internal buffering / bandwidth -+ * was not adequate to receive the entire -+ * packet. -+ * -+ * - 2 = jabber error: the RGMII packet was too large -+ * and is truncated. -+ * -+ * - 3 = overrun error: the RGMII packet is longer -+ * than allowed and had an FCS error. -+ * -+ * - 4 = oversize error: the RGMII packet is longer -+ * than allowed. -+ * -+ * - 5 = alignment error: the RGMII packet is not an -+ * integer number of bytes and had an FCS error -+ * (100M and 10M only). -+ * -+ * - 6 = fragment error: the RGMII packet is shorter -+ * than allowed and had an FCS error. -+ * -+ * - 7 = GMX FCS error: the RGMII packet had an FCS -+ * error. -+ * -+ * - 8 = undersize error: the RGMII packet is shorter -+ * than allowed. -+ * -+ * - 9 = extend error: the RGMII packet had an extend -+ * error. -+ * -+ * - 10 = length mismatch error: the RGMII packet had -+ * a length that did not match the length field -+ * in the L2 HDR. -+ * -+ * - 11 = RGMII RX error/SPI4 DIP4 Error: the RGMII -+ * packet had one or more data reception errors -+ * (RXERR) or the SPI4 packet had one or more -+ * DIP4 errors. -+ * -+ * - 12 = RGMII skip error/SPI4 Abort Error: the RGMII -+ * packet was not large enough to cover the -+ * skipped bytes or the SPI4 packet was -+ * terminated with an About EOPS. -+ * -+ * - 13 = RGMII nibble error/SPI4 Port NXA Error: the -+ * RGMII packet had a studder error (data not -+ * repeated - 10/100M only) or the SPI4 packet -+ * was sent to an NXA. -+ * -+ * - 16 = FCS error: a SPI4.2 packet had an FCS error. -+ * -+ * - 17 = Skip error: a packet was not large enough to -+ * cover the skipped bytes. -+ * -+ * - 18 = L2 header malformed: the packet is not long -+ * enough to contain the L2 -+ */ -+ -+ /* -+ * lower err_code = first-level descriptor of the -+ * work. -+ * -+ * zero for packet submitted by hardware that isn't on -+ * the slow path. -+ */ -+ uint64_t rcv_error:1; -+ -+ /* Type is cvmx_pip_err_t (union, so can't use directly. */ -+ uint64_t err_code:8; -+ } snoip; -+ -+}; -+ -+/** -+ * Work queue entry format -+ * -+ * must be 8-byte aligned -+ */ -+struct cvmx_wqe { -+ -+ /***************************************************************** -+ * WORD 0 -+ * HW WRITE: the following 64 bits are filled by HW when a packet arrives -+ */ -+ -+ /** -+ * raw chksum result generated by the HW -+ */ -+ uint16_t hw_chksum; -+ /** -+ * Field unused by hardware - available for software -+ */ -+ uint8_t unused; -+ /** -+ * Next pointer used by hardware for list maintenance. -+ * May be written/read by HW before the work queue -+ * entry is scheduled to a PP -+ * (Only 36 bits used in Octeon 1) -+ */ -+ uint64_t next_ptr:40; -+ -+ /***************************************************************** -+ * WORD 1 -+ * HW WRITE: the following 64 bits are filled by HW when a packet arrives -+ */ -+ -+ /** -+ * HW sets to the total number of bytes in the packet -+ */ -+ uint64_t len:16; -+ /** -+ * HW sets this to input physical port -+ */ -+ uint64_t ipprt:6; -+ -+ /** -+ * HW sets this to what it thought the priority of the input packet was -+ */ -+ uint64_t qos:3; -+ -+ /** -+ * the group that the work queue entry will be scheduled to -+ */ -+ uint64_t grp:4; -+ /** -+ * the type of the tag (ORDERED, ATOMIC, NULL) -+ */ -+ uint64_t tag_type:3; -+ /** -+ * the synchronization/ordering tag -+ */ -+ uint64_t tag:32; -+ -+ /** -+ * WORD 2 HW WRITE: the following 64-bits are filled in by -+ * hardware when a packet arrives This indicates a variety of -+ * status and error conditions. -+ */ -+ union cvmx_pip_wqe_word2 word2; -+ -+ /** -+ * Pointer to the first segment of the packet. -+ */ -+ union cvmx_buf_ptr packet_ptr; -+ -+ /** -+ * HW WRITE: octeon will fill in a programmable amount from the -+ * packet, up to (at most, but perhaps less) the amount -+ * needed to fill the work queue entry to 128 bytes -+ * If the packet is recognized to be IP, the hardware starts (except that -+ * the IPv4 header is padded for appropriate alignment) writing here where -+ * the IP header starts. -+ * If the packet is not recognized to be IP, the hardware starts writing -+ * the beginning of the packet here. -+ */ -+ uint8_t packet_data[96]; -+ -+ /** -+ * If desired, SW can make the work Q entry any length. For the -+ * purposes of discussion here, Assume 128B always, as this is all that -+ * the hardware deals with. -+ * -+ */ -+ -+} CVMX_CACHE_LINE_ALIGNED; -+ -+#endif /* __CVMX_WQE_H__ */ ---- a/arch/mips/include/asm/octeon/cvmx.h -+++ b/arch/mips/include/asm/octeon/cvmx.h -@@ -376,6 +376,18 @@ static inline uint64_t cvmx_get_cycle(vo - } - - /** -+ * Wait for the specified number of cycle -+ * -+ */ -+static inline void cvmx_wait(uint64_t cycles) -+{ -+ uint64_t done = cvmx_get_cycle() + cycles; -+ -+ while (cvmx_get_cycle() < done) -+ ; /* Spin */ -+} -+ -+/** - * Reads a chip global cycle counter. This counts CPU cycles since - * chip reset. The counter is 64 bit. - * This register does not exist on CN38XX pass 1 silicion ---- a/arch/mips/include/asm/octeon/octeon.h -+++ b/arch/mips/include/asm/octeon/octeon.h -@@ -245,4 +245,6 @@ static inline uint32_t octeon_npi_read32 - return cvmx_read64_uint32(address ^ 4); - } - -+extern struct cvmx_bootinfo *octeon_bootinfo; -+ - #endif /* __ASM_OCTEON_OCTEON_H */ |