rename the mx2 target to imx21

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22294 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 255 deletions

diff --git a/target/linux/mx2/files/arch/arm/mach-mx2/mach-vp6500.c b/target/linux/mx2/files/arch/arm/mach-mx2/mach-vp6500.c
deleted file mode 100644
index fb4464eb8..000000000
--- a/target/linux/mx2/files/arch/arm/mach-mx2/mach-vp6500.c
+++ /dev/null
@@ -1,255 +0,0 @@
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/imx-uart.h>
-#include <mach/imxfb.h>
-#include <mach/iomux-mx21.h>
-#include <mach/board-vp6500.h>
-
-#include "devices.h"
-
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm_backlight.h>
-
-static unsigned int vp6500_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-
-#if 0
-	/* LCDC */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-#endif
-
-	/* LCD Backlight */
-	PE5_PF_PWMO,
-	VP6500_GPIO_BACKLIGHT_EN | GPIO_GPIO | GPIO_OUT,
-};
-
-/* Flash */
-
-static struct physmap_flash_data vp6500_flash_data = {
-	.width = 2,
-};
-
-static struct resource vp6500_flash_resource = {
-	.start = MX21_CS0_BASE_ADDR,
-	.end = MX21_CS0_BASE_ADDR + SZ_64M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device vp6500_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = -1,
-	.dev = {
-		.platform_data = &vp6500_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &vp6500_flash_resource,
-};
-
-/* LEDs */
-
-static struct gpio_led vp6500_leds[] = {
-	{
-		.name = "vp6500:orange:keypad",
-		.gpio = VP6500_GPIO_LED_KEYPAD,
-	},
-	{
-		.name = "vp6500:green:",
-		.gpio = VP6500_GPIO_LED_GREEN,
-		.active_low = 1,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "vp6500:red:",
-		.gpio = VP6500_GPIO_LED_RED,
-	},
-	{
-		.name = "vp6500:red:camera",
-		.gpio = VP6500_GPIO_LED_CAMERA,
-	},
-};
-
-static struct gpio_led_platform_data vp6500_leds_data = {
-	.leds		= vp6500_leds,
-	.num_leds	= ARRAY_SIZE(vp6500_leds),
-};
-
-static struct platform_device vp6500_leds_device = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &vp6500_leds_data,
-	},
-};
-
-/* Keypad */
-
-static const uint32_t vp6500_keypad_keys[] = {
-	KEY(0, 3, KEY_F2),
-	KEY(0, 4, KEY_RIGHT),
-	KEY(1, 0, KEY_ZOOM),
-	KEY(1, 1, KEY_NUMERIC_POUND),
-	KEY(1, 2, KEY_0),
-	KEY(1, 3, KEY_ENTER),
-	KEY(1, 4, KEY_8),
-	KEY(2, 0, KEY_5),
-	KEY(2, 1, KEY_2),
-	KEY(2, 2, KEY_DOWN),
-	KEY(2, 3, KEY_OK),
-	KEY(2, 4, KEY_UP),
-	KEY(3, 0, KEY_CAMERA),
-	KEY(3, 1, KEY_NUMERIC_STAR),
-	KEY(3, 2, KEY_9),
-	KEY(3, 3, KEY_LEFT),
-	KEY(3, 4, KEY_6),
-	KEY(4, 0, KEY_7),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_1),
-	KEY(4, 3, KEY_3),
-	KEY(4, 4, KEY_F1),
-};
-
-static struct matrix_keymap_data vp6500_keypad_data = {
-	.keymap = vp6500_keypad_keys,
-	.keymap_size = ARRAY_SIZE(vp6500_keypad_keys),
-};
-
-static struct resource vp6500_keypad_resources[] = {
-	{
-		.start = MX21_KPP_BASE_ADDR,
-		.end = MX21_KPP_BASE_ADDR + 0x10 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX21_INT_KPP,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device vp6500_keypad_device = {
-	.name = "imx-keypad",
-	.id = 0,
-	.dev = {
-		.platform_data = &vp6500_keypad_data,
-	},
-	.resource = vp6500_keypad_resources,
-	.num_resources = ARRAY_SIZE(vp6500_keypad_resources),
-};
-
-static struct gpio_keys_button vp6500_keys = {
-	.gpio = VP6500_GPIO_POWER_KEY,
-	.code = KEY_POWER,
-	.desc = "Power button",
-	.active_low = 1,
-};
-
-static struct gpio_keys_platform_data vp6500_key_data = {
-	.buttons = &vp6500_keys,
-	.nbuttons = 1,
-};
-
-static struct platform_device vp6500_key_device = {
-	.name = "gpio-keys",
-	.id = -1,
-	.dev = {
-		.platform_data = &vp6500_key_data,
-	},
-};
-
-/* LCD backlight */
-
-static int vp6500_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(VP6500_GPIO_BACKLIGHT_EN, !!brightness);
-
-	return brightness;
-}
-
-static struct platform_pwm_backlight_data vp6500_backlight_data = {
-	.max_brightness = 255,
-	.dft_brightness = 100,
-	.pwm_period_ns = 15000000,
-	.notify = vp6500_backlight_notify,
-};
-
-static struct platform_device vp6500_backlight_device = {
-	.name = "pwm-backlight",
-	.id = -1,
-	.dev = {
-		.parent = &mxc_pwm_device.dev,
-		.platform_data = &vp6500_backlight_data,
-	},
-};
-
-
-static struct platform_device *platform_devices[] __initdata = {
-	&vp6500_nor_mtd_device,
-	&vp6500_leds_device,
-	&vp6500_keypad_device,
-	&vp6500_key_device,
-	&vp6500_backlight_device,
-};
-
-static void __init vp6500_board_init(void)
-{
-	mxc_gpio_setup_multiple_pins(vp6500_pins, ARRAY_SIZE(vp6500_pins),
-			"vp6500");
-
-	mxc_register_device(&mxc_uart_device0, NULL);
-	mxc_register_device(&mxc_pwm_device, NULL);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init vp6500_timer_init(void)
-{
-	mx21_clocks_init(32768, 26000000);
-}
-
-static struct sys_timer vp6500_timer = {
-	.init	= vp6500_timer_init,
-};
-
-MACHINE_START(VP6500, "Phillips VP6500")
-	.phys_io        = MX21_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX21_PHYS_OFFSET + 0x100,
-	.map_io         = mx21_map_io,
-	.init_irq       = mx21_init_irq,
-	.init_machine   = vp6500_board_init,
-	.timer          = &vp6500_timer,
-MACHINE_END