diff options
| author | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-03-09 14:35:41 +0000 |
|---|---|---|
| committer | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-03-09 14:35:41 +0000 |
| commit | 455e74f06309d6e4fc035f80698492fda2696aab (patch) | |
| tree | 0d070cf1901b2c0db00fe54bab4b8ed35e5a35e5 /target/linux/mpc52xx | |
| parent | 95a4336b23283964e9b5f0ddd7fd9fe24e3f55af (diff) | |
Several small fixes for ar8216 driver (patch by Jonas Gorski)
* Create defines for some magic values/masks.
* Change vlan_id to u16, to allow VIDs > 255.
* Add a range check to set_pvid as it isn't a VID, but the index
in the vlan table.
* Set the max VID to 4094, since 4095 is a reserved value and
should not be used.
* In mangle_rx replace the provided VID with the VID of the table
entry of the port, not the index of the table.
* In hw_apply, remove a redundant emptyness check (was already
checked several lines above).
* In no vlan mode do not set the ingress mode to secure, as there
are no vlan table entries, but to use the port's destination
masks. Otherwise the switch won't forward anything.
* In read_status tell that the phy is up (taken from the rtl8306
driver).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20083 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/mpc52xx')
0 files changed, 0 insertions, 0 deletions