add minor code cleanup and a core reset for internal sb devices that need it

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@2718 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 130 insertions, 97 deletions

diff --git a/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch b/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch
index 686f2d2af..b945e4372 100644
--- a/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch
+++ b/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch
@@ -11221,8 +11221,8 @@ diff -urN linux.old/arch/mips/bcm947xx/irq.c linux.dev/arch/mips/bcm947xx/irq.c
 +}
 diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c
 --- linux.old/arch/mips/bcm947xx/pci.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/pci.c	2005-12-18 04:44:18.736590500 +0100
-@@ -0,0 +1,91 @@
++++ linux.dev/arch/mips/bcm947xx/pci.c	2005-12-18 07:01:36.731635000 +0100
+@@ -0,0 +1,215 @@
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/pci.h>
@@ -11237,8 +11237,11 @@ diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c
 +#include <sbmips.h>
 +#include <sbconfig.h>
 +#include <sbpci.h>
++#include <bcmdevs.h>
++#include <pcicfg.h>
 +
 +extern sb_t *sbh;
++extern spinlock_t sbh_lock;
 +
 +
 +static int
@@ -11246,7 +11249,12 @@ diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c
 +				int reg, int size, u32 *val)
 +{
 +	int ret;
++	unsigned long flags;
++	
++	spin_lock_irqsave(&sbh_lock, flags);
 +	ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size);
++	spin_unlock_irqrestore(&sbh_lock, flags);
++
 +	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
 +}
 +
@@ -11255,7 +11263,12 @@ diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c
 +				int reg, int size, u32 val)
 +{
 +	int ret;
++	unsigned long flags;
++	
++	spin_lock_irqsave(&sbh_lock, flags);
 +	ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size);
++	spin_unlock_irqrestore(&sbh_lock, flags);
++
 +	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
 +}
 +
@@ -11308,12 +11321,123 @@ diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c
 +
 +void bcm47xx_pci_init(void)
 +{
++	unsigned long flags;
++	
++	spin_lock_irqsave(&sbh_lock, flags);
 +	sbpci_init(sbh);
++	spin_unlock_irqrestore(&sbh_lock, flags);
++
 +	set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000));
 +
 +	register_pci_controller(&bcm47xx_sb_pci_controller);
 +	register_pci_controller(&bcm47xx_ext_pci_controller);
 +}
++
++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	u8 irq;
++	
++	if (dev->bus->number == 1)
++		return 2;
++
++	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
++	return irq + 2;
++}
++
++u32 pci_iobase = 0x100;
++u32 pci_membase = SB_PCI_DMA;
++
++static void bcm47xx_fixup_device(struct pci_dev *d)
++{
++	struct resource *res;
++	int pos, size;
++	u32 *base;
++
++	if (d->bus->number == 0)
++		return;
++	
++	printk("PCI: Fixing up device %s\n", pci_name(d));
++
++	/* Fix up resource bases */
++	for (pos = 0; pos < 6; pos++) {
++		res = &d->resource[pos];
++		base = ((res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase);
++		if (res->end) {
++			size = res->end - res->start + 1;
++			if (*base & (size - 1))
++				*base = (*base + size) & ~(size - 1);
++			res->start = *base;
++			res->end = res->start + size - 1;
++			*base += size;
++			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
++		}
++		/* Fix up PCI bridge BAR0 only */
++		if (d->bus->number == 1 && PCI_SLOT(d->devfn) == 0)
++			break;
++	}
++	/* Fix up interrupt lines */
++	if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
++		d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
++	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
++}
++
++
++static void bcm47xx_fixup_bridge(struct pci_dev *dev)
++{
++	if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
++		return;
++	
++	printk("PCI: fixing up bridge\n");
++
++	/* Enable PCI bridge bus mastering and memory space */
++	pci_set_master(dev);
++	pcibios_enable_device(dev, ~0);
++	
++	/* Enable PCI bridge BAR1 prefetch and burst */
++	pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
++}
++
++/* Do platform specific device initialization at pci_enable_device() time */
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	uint coreidx;
++	unsigned long flags;
++	
++	bcm47xx_fixup_device(dev);
++
++	/* These cores come out of reset enabled */
++	if ((dev->bus->number != 0) ||
++		(dev->device == SB_MIPS) ||
++		(dev->device == SB_MIPS33) ||
++		(dev->device == SB_EXTIF) ||
++		(dev->device == SB_CC))
++		return 0;
++
++	/* Do a core reset */
++	spin_lock_irqsave(&sbh_lock, flags);
++	coreidx = sb_coreidx(sbh);
++	if (sb_setcoreidx(sbh, PCI_SLOT(dev->devfn)) && (sb_coreid(sbh) == SB_USB)) {
++		/* 
++		 * The USB core requires a special bit to be set during core
++		 * reset to enable host (OHCI) mode. Resetting the SB core in
++		 * pcibios_enable_device() is a hack for compatibility with
++		 * vanilla usb-ohci so that it does not have to know about
++		 * SB. A driver that wants to use the USB core in device mode
++		 * should know about SB and should reset the bit back to 0
++		 * after calling pcibios_enable_device().
++		 */
++		sb_core_disable(sbh, sb_coreflags(sbh, 0, 0));
++		sb_core_reset(sbh, 1 << 29);
++	} else {
++		sb_core_reset(sbh, 0);
++	}
++	sb_setcoreidx(sbh, coreidx);
++	spin_unlock_irqrestore(&sbh_lock, flags);
++	
++	return 0;
++}
++
++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcm47xx_fixup_bridge);
 diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c
 --- linux.old/arch/mips/bcm947xx/prom.c	1970-01-01 01:00:00.000000000 +0100
 +++ linux.dev/arch/mips/bcm947xx/prom.c	2005-12-15 12:57:27.877187750 +0100
@@ -11379,8 +11503,8 @@ diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.
 +}
 diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c
 --- linux.old/arch/mips/bcm947xx/setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/setup.c	2005-12-18 04:58:53.946564750 +0100
-@@ -0,0 +1,155 @@
++++ linux.dev/arch/mips/bcm947xx/setup.c	2005-12-18 06:34:52.106215250 +0100
+@@ -0,0 +1,157 @@
 +/*
 + *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
 + *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
@@ -11431,6 +11555,7 @@ diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setu
 +extern void bcm47xx_time_init(void);
 +extern void bcm47xx_timer_setup(struct irqaction *irq);
 +void *sbh;
++spinlock_t sbh_lock = SPIN_LOCK_UNLOCKED;
 +int boardflags;
 +
 +static int ser_line = 0;
@@ -11535,6 +11660,7 @@ diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setu
 +}
 +
 +EXPORT_SYMBOL(sbh);
++EXPORT_SYMBOL(sbh_lock);
 +EXPORT_SYMBOL(boardflags);
 diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c
 --- linux.old/arch/mips/bcm947xx/time.c	1970-01-01 01:00:00.000000000 +0100
@@ -11683,99 +11809,6 @@ diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
  		tlbw(p);
  		break;
  
-diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
---- linux.old/arch/mips/pci/Makefile	2005-12-15 13:26:49.814003000 +0100
-+++ linux.dev/arch/mips/pci/Makefile	2005-12-15 14:27:26.439319250 +0100
-@@ -18,6 +18,7 @@
- obj-$(CONFIG_MIPS_TX3927)	+= ops-tx3927.o
- obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
- obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
-+obj-$(CONFIG_BCM947XX)		+= fixup-bcm47xx.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.
-diff -urN linux.old/arch/mips/pci/fixup-bcm47xx.c linux.dev/arch/mips/pci/fixup-bcm47xx.c
---- linux.old/arch/mips/pci/fixup-bcm47xx.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/pci/fixup-bcm47xx.c	2005-12-18 04:42:58.079549750 +0100
-@@ -0,0 +1,78 @@
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <typedefs.h>
-+#include <sbconfig.h>
-+#include <bcmdevs.h>
-+#include <pcicfg.h>
-+
-+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	u8 irq;
-+	
-+	if (dev->bus->number == 1)
-+		return 2;
-+
-+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
-+	return irq + 2;
-+}
-+
-+u32 pci_iobase = 0x100;
-+u32 pci_membase = SB_PCI_DMA;
-+
-+static void bcm47xx_fixup_device(struct pci_dev *d)
-+{
-+	struct resource *res;
-+	int pos, size;
-+	u32 *base;
-+
-+	if (d->bus->number == 0)
-+		return;
-+	
-+	printk("PCI: Fixing up device %s\n", pci_name(d));
-+
-+	/* Fix up resource bases */
-+	for (pos = 0; pos < 6; pos++) {
-+		res = &d->resource[pos];
-+		base = ((res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase);
-+		if (res->end) {
-+			size = res->end - res->start + 1;
-+			if (*base & (size - 1))
-+				*base = (*base + size) & ~(size - 1);
-+			res->start = *base;
-+			res->end = res->start + size - 1;
-+			*base += size;
-+			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
-+		}
-+		/* Fix up PCI bridge BAR0 only */
-+		if (d->bus->number == 1 && PCI_SLOT(d->devfn) == 0)
-+			break;
-+	}
-+	/* Fix up interrupt lines */
-+	if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
-+		d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
-+	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
-+}
-+
-+static void bcm47xx_fixup_bridge(struct pci_dev *dev)
-+{
-+	if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
-+		return;
-+	
-+	printk("PCI: fixing up bridge\n");
-+
-+	/* Enable PCI bridge bus mastering and memory space */
-+	pci_set_master(dev);
-+	pcibios_enable_device(dev, ~0);
-+	
-+	/* Enable PCI bridge BAR1 prefetch and burst */
-+	pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
-+}
-+
-+/* Do platform specific device initialization at pci_enable_device() time */
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+	bcm47xx_fixup_device(dev);
-+	return 0;
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcm47xx_fixup_bridge);
 diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
 --- linux.old/include/asm-mips/bootinfo.h	2005-12-15 13:26:49.818001250 +0100
 +++ linux.dev/include/asm-mips/bootinfo.h	2005-12-15 12:57:27.969147500 +0100