[lantiq] cleanup patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32953 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 117 deletions

diff --git a/target/linux/lantiq/patches-3.3/204-owrt-dm9000-polling.patch b/target/linux/lantiq/patches-3.3/204-owrt-dm9000-polling.patch
deleted file mode 100644
index 7e898b810..000000000
--- a/target/linux/lantiq/patches-3.3/204-owrt-dm9000-polling.patch
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/drivers/net/ethernet/davicom/dm9000.c
-+++ b/drivers/net/ethernet/davicom/dm9000.c
-@@ -19,6 +19,7 @@
-  *	Sascha Hauer <s.hauer@pengutronix.de>
-  */
- 
-+#define DEBUG
- #include <linux/module.h>
- #include <linux/ioport.h>
- #include <linux/netdevice.h>
-@@ -132,6 +133,8 @@ typedef struct board_info {
- 	struct delayed_work phy_poll;
- 	struct net_device  *ndev;
- 
-+	struct delayed_work irq_poll;	/* for use in irq polling mode */
-+
- 	spinlock_t	lock;
- 
- 	struct mii_if_info mii;
-@@ -845,6 +848,8 @@ static void dm9000_timeout(struct net_de
- 	netif_stop_queue(dev);
- 	dm9000_reset(db);
- 	dm9000_init_dm9000(dev);
-+	dm9000_reset(db);
-+	dm9000_init_dm9000(dev);
- 	/* We can accept TX packets again */
- 	dev->trans_start = jiffies; /* prevent tx timeout */
- 	netif_wake_queue(dev);
-@@ -916,6 +921,12 @@ dm9000_start_xmit(struct sk_buff *skb, s
- 	/* free this SKB */
- 	dev_kfree_skb(skb);
- 
-+	/* directly poll afterwards */
-+	if (dev->irq == -1) {
-+		cancel_delayed_work(&db->irq_poll);
-+		schedule_delayed_work(&db->irq_poll, 1);
-+	}
-+
- 	return NETDEV_TX_OK;
- }
- 
-@@ -1157,6 +1168,18 @@ static void dm9000_poll_controller(struc
- }
- #endif
- 
-+static void dm9000_poll_irq(struct work_struct *w)
-+{
-+	struct delayed_work *dw = to_delayed_work(w);
-+	board_info_t *db = container_of(dw, board_info_t, irq_poll);
-+	struct net_device *ndev = db->ndev;
-+
-+	dm9000_interrupt(0, ndev);
-+
-+	if (netif_running(ndev))
-+		schedule_delayed_work(&db->irq_poll, HZ /100);
-+}
-+
- /*
-  *  Open the interface.
-  *  The interface is opened whenever "ifconfig" actives it.
-@@ -1170,14 +1193,15 @@ dm9000_open(struct net_device *dev)
- 	if (netif_msg_ifup(db))
- 		dev_dbg(db->dev, "enabling %s\n", dev->name);
- 
--	/* If there is no IRQ type specified, default to something that
--	 * may work, and tell the user that this is a problem */
-+	if (dev->irq != -1) {
-+		/* If there is no IRQ type specified, default to something that
-+		 * may work, and tell the user that this is a problem */
- 
--	if (irqflags == IRQF_TRIGGER_NONE)
--		dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
--
--	irqflags |= IRQF_SHARED;
-+		if (irqflags == IRQF_TRIGGER_NONE)
-+			dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
- 
-+		irqflags |= IRQF_SHARED;
-+	}
- 	/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
- 	iow(db, DM9000_GPR, 0);	/* REG_1F bit0 activate phyxcer */
- 	mdelay(1); /* delay needs by DM9000B */
-@@ -1186,8 +1210,14 @@ dm9000_open(struct net_device *dev)
- 	dm9000_reset(db);
- 	dm9000_init_dm9000(dev);
- 
--	if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
--		return -EAGAIN;
-+	/* testing: init a second time */
-+	dm9000_reset(db);
-+	dm9000_init_dm9000(dev);
-+
-+	if (dev->irq != -1) {
-+		if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
-+			return -EAGAIN;
-+	}
- 
- 	/* Init driver variable */
- 	db->dbug_cnt = 0;
-@@ -1195,6 +1225,9 @@ dm9000_open(struct net_device *dev)
- 	mii_check_media(&db->mii, netif_msg_link(db), 1);
- 	netif_start_queue(dev);
- 	
-+	if (dev->irq == -1)
-+		schedule_delayed_work(&db->irq_poll, HZ / 100);
-+
- 	dm9000_schedule_poll(db);
- 
- 	return 0;
-@@ -1392,6 +1425,7 @@ dm9000_probe(struct platform_device *pde
- 	mutex_init(&db->addr_lock);
- 
- 	INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work);
-+	INIT_DELAYED_WORK(&db->irq_poll, dm9000_poll_irq);
- 
- 	db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);