[lantiq] 3.2 R.I.P.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 83 deletions

diff --git a/target/linux/lantiq/patches-3.2/0071-MIPS-lantiq-stp-fix-for-ase-add-get-clock-disabled.patch b/target/linux/lantiq/patches-3.2/0071-MIPS-lantiq-stp-fix-for-ase-add-get-clock-disabled.patch
deleted file mode 100644
index d65a3e8a7..000000000
--- a/target/linux/lantiq/patches-3.2/0071-MIPS-lantiq-stp-fix-for-ase-add-get-clock-disabled.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From d8e3038c520ea6c7619d3f5339c47ca0c2aa7fe3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 11 Apr 2012 18:47:53 +0200
-Subject: [PATCH 71/73] MIPS: lantiq: stp, fix for ase, add get, clock
- disabled
-
-Lantiq serial-to-parallel hardware gpio module
-Added gpio pins as used for amazon se (ase)
-Added get to enable reporting of gpio status
-Changed to use software update, as hw clock was not running on ase. Clock
-really only needed if hw flashing was implemented.
-
-Signed-off-by: Conor O'Gorman <i@conorogorman.net>
----
- arch/mips/lantiq/xway/gpio_stp.c |   22 +++++++++++++---------
- 1 files changed, 13 insertions(+), 9 deletions(-)
-
---- a/arch/mips/lantiq/xway/gpio_stp.c
-+++ b/arch/mips/lantiq/xway/gpio_stp.c
-@@ -27,6 +27,7 @@
- #define LTQ_STP_AR		0x10
- 
- #define LTQ_STP_CON_SWU		(1 << 31)
-+#define LTQ_STP_SWU_MASK	(1 << 31)
- #define LTQ_STP_2HZ		0
- #define LTQ_STP_4HZ		(1 << 23)
- #define LTQ_STP_8HZ		(2 << 23)
-@@ -60,6 +61,12 @@ static void ltq_stp_set(struct gpio_chip
- 	else
- 		ltq_stp_shadow &= ~(1 << offset);
- 	ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
-+	ltq_stp_w32_mask(LTQ_STP_SWU_MASK, LTQ_STP_CON_SWU, LTQ_STP_CON0);
-+}
-+
-+static int ltq_stp_get(struct gpio_chip *chip, unsigned offset)
-+{
-+	return !!(ltq_stp_r32(LTQ_STP_CPU0) & (1<<offset));
- }
- 
- static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
-@@ -74,6 +81,7 @@ static struct gpio_chip ltq_stp_chip = {
- 	.label = "ltq_stp",
- 	.direction_output = ltq_stp_direction_output,
- 	.set = ltq_stp_set,
-+	.get = ltq_stp_get,
- 	.base = 200,
- 	.ngpio = 24,
- 	.owner = THIS_MODULE,
-@@ -97,12 +105,6 @@ static int ltq_stp_hw_init(struct device
- 	ltq_stp_w32_mask(0, LTQ_STP_GROUP0 | LTQ_STP_GROUP1 | LTQ_STP_GROUP2,
- 		LTQ_STP_CON1);
- 
--	/* stp are update periodically by the FPI bus */
--	ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
--
--	/* set stp update speed */
--	ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
--
- 	/* tell the hardware that pin (led) 0 and 1 are controlled
- 	 *  by the dsl arc
- 	 */
-@@ -118,6 +120,7 @@ static int __devinit ltq_stp_probe(struc
- {
- 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	int ret = 0;
-+	int pin;
- 
- 	if (!res)
- 		return -ENOENT;
-@@ -135,9 +138,10 @@ static int __devinit ltq_stp_probe(struc
- 	}
- 
- 	/* the 3 pins used to control the external stp */
--	if (ltq_gpio_request(&pdev->dev, 4, 2, 1, "stp-st") ||
--			ltq_gpio_request(&pdev->dev, 5, 2, 1, "stp-d") ||
--			ltq_gpio_request(&pdev->dev, 6, 2, 1, "stp-sh")) {
-+	pin = ltq_is_ase() ? 1 : 4;
-+	if (ltq_gpio_request(&pdev->dev, pin, 2, 1, "stp-st") ||
-+			ltq_gpio_request(&pdev->dev, pin+1, 2, 1, "stp-d") ||
-+			ltq_gpio_request(&pdev->dev, pin+2, 2, 1, "stp-sh")) {
- 		dev_err(&pdev->dev, "failed to request needed gpios\n");
- 		return -EBUSY;
- 	}