summaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/patches-3.0/120-falcon-i2c.patch
diff options
context:
space:
mode:
authorblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>2011-07-06 17:27:17 +0000
committerblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>2011-07-06 17:27:17 +0000
commita408b75fbaff555cef9536924a1864a69cea8ed9 (patch)
treeacca62cbd1cedc68c360a8af26d56b7207e82b6e /target/linux/lantiq/patches-3.0/120-falcon-i2c.patch
parent90433b3461130f8a4913b3530938e5c552f6b23f (diff)
[lantiq] get ready for 3.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27496 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/lantiq/patches-3.0/120-falcon-i2c.patch')
-rw-r--r--target/linux/lantiq/patches-3.0/120-falcon-i2c.patch828
1 files changed, 828 insertions, 0 deletions
diff --git a/target/linux/lantiq/patches-3.0/120-falcon-i2c.patch b/target/linux/lantiq/patches-3.0/120-falcon-i2c.patch
new file mode 100644
index 000000000..c5d39c8c2
--- /dev/null
+++ b/target/linux/lantiq/patches-3.0/120-falcon-i2c.patch
@@ -0,0 +1,828 @@
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -82,5 +82,6 @@ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
+ obj-$(CONFIG_I2C_STUB) += i2c-stub.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_FALCON) += i2c-falcon.o
+
+ ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -282,6 +282,10 @@ config I2C_POWERMAC
+
+ comment "I2C system bus drivers (mostly embedded / system-on-chip)"
+
++config I2C_FALCON
++ tristate "Falcon I2C interface"
++# depends on SOC_FALCON
++
+ config I2C_AT91
+ tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
+ depends on ARCH_AT91 && EXPERIMENTAL && BROKEN
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-falcon.c
+@@ -0,0 +1,803 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/* #define DEBUG */
++
++#include <linux/module.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/interrupt.h>
++#include <linux/spinlock.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++
++/* CURRENT ISSUES:
++ * - no high speed support
++ * - rx issue with "address mode" & "tx end" interrupts
++ * - ten bit mode is not tested
++ */
++
++/* mapping for access macros */
++#define reg_r32(reg) __raw_readl(reg)
++#define reg_w32(val, reg) __raw_writel(val, reg)
++#define reg_w32_mask(clear, set, reg) \
++ reg_w32((reg_r32(reg) & ~(clear)) | (set), reg)
++#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)&reg)[idx])
++#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)&reg)[idx])
++#define i2c (priv->membase)
++#include <falcon/i2c_reg.h>
++
++/* enable hacks to overcome current issue */
++#define FALCON_FIX_ME
++
++#define FALCON_I2C_ADDR 0x00
++#define FALCON_I2C_READY_TIMEOUT 1000
++#define FALCON_I2C_WAIT_TIMEOUT 10
++
++#define DRV_NAME "i2c-falcon"
++
++#if defined(DEBUG)
++#define static /* no static functions for better debugging */
++#endif
++
++#define FALCON_I2C_ARB_LOST (1 << 0)
++#define FALCON_I2C_NACK (1 << 1)
++#define FALCON_I2C_RX_UFL (1 << 2)
++#define FALCON_I2C_RX_OFL (1 << 3)
++#define FALCON_I2C_TX_UFL (1 << 4)
++#define FALCON_I2C_TX_OFL (1 << 5)
++#define FALCON_I2C_BURST_REQ (1 << 6)
++#define FALCON_I2C_RX (1 << 7)
++#define FALCON_I2C_TX_END (1 << 8)
++#define FALCON_I2C_ADDR_MATCH (1 << 9) /* doesn't trigger */
++
++struct falcon_i2c {
++ spinlock_t lock;
++
++ enum {
++ FALCON_I2C_MODE_100 = 1,
++ FALCON_I2C_MODE_400 = 2,
++ FALCON_I2C_MODE_3400 = 3
++ } mode; /* current speed mode */
++
++ int ten_bit; /* current address mode */
++ unsigned long status; /* bus events holder */
++ struct clk *clk; /* clock input for i2c hardware block */
++ struct gpon_reg_i2c __iomem *membase; /* base of mapped registers */
++ int irq_lb, irq_b, irq_err, irq_p; /* last burst, burst, error,
++ protocol IRQs */
++ struct completion done;
++ struct i2c_adapter adap;
++ struct device *dev;
++};
++
++#define FALCON_I2C_ERROR_MASK (FALCON_I2C_NACK \
++ | FALCON_I2C_ARB_LOST \
++ | FALCON_I2C_RX_OFL \
++ | FALCON_I2C_RX_UFL \
++ | FALCON_I2C_TX_OFL \
++ | FALCON_I2C_TX_UFL)
++
++#define FALCON_I2C_ERROR(priv) (priv->status & FALCON_I2C_ERROR_MASK)
++#define FALCON_I2C_ERROR_CLEAR(priv) do { \
++ priv->status &= \
++ ~FALCON_I2C_ERROR_MASK; \
++ } while (0)
++
++static void falcon_addr_configure(struct falcon_i2c *priv, int ten_bit)
++{
++ u32 ten_bit_mask = ten_bit ? I2C_ADDR_CFG_TBAM_10bit : 0;
++
++ /* configure address */
++ i2c_w32(I2C_ADDR_CFG_SOPE_EN /* generate stop when no more data in the
++ fifo */
++ | I2C_ADDR_CFG_SONA_EN /* generate stop when NA received */
++ | I2C_ADDR_CFG_MnS_EN /* we are master device */
++ | ten_bit_mask
++ | FALCON_I2C_ADDR, /* our address */
++ addr_cfg);
++}
++
++static irqreturn_t falcon_i2c_isr(int irq, void *dev_id)
++{
++ u32 i_raw, i_pro, i_err;
++ struct falcon_i2c *priv = dev_id;
++ unsigned long flags;
++ unsigned int old_status;
++
++ spin_lock_irqsave(&priv->lock, flags);
++
++ old_status = (unsigned int)priv->status;
++
++ i_raw = i2c_r32(mis);
++
++ /* protocol interrupt */
++ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC) {
++ i_pro = i2c_r32(p_irqss);
++
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX)
++ priv->status |= FALCON_I2C_RX;
++
++ /* tx end */
++ if (i_pro & I2C_P_IRQSS_TX_END)
++ priv->status |= FALCON_I2C_TX_END;
++
++ /* not acknowledge */
++ if (i_pro & I2C_P_IRQSS_NACK)
++ priv->status |= FALCON_I2C_NACK;
++
++ /* arbitration lost */
++ if (i_pro & I2C_P_IRQSS_AL)
++ priv->status |= FALCON_I2C_ARB_LOST;
++
++ /* address match */
++ if (i_pro & I2C_P_IRQSS_AM)
++ priv->status |= FALCON_I2C_ADDR_MATCH;
++
++ i2c_w32(i_pro, p_irqsc);
++ }
++
++ /* error interrupt */
++ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
++ i_err = i2c_r32(err_irqss);
++
++ /* tx fifo overflow */
++ if (i_err & I2C_ERR_IRQSS_TXF_OFL)
++ priv->status |= FALCON_I2C_TX_OFL;
++
++ /* tx fifo underflow */
++ if (i_err & I2C_ERR_IRQSS_TXF_UFL)
++ priv->status |= FALCON_I2C_TX_UFL;
++
++ /* rx fifo overflow */
++ if (i_err & I2C_ERR_IRQSS_RXF_OFL)
++ priv->status |= FALCON_I2C_RX_OFL;
++
++ /* rx fifo underflow */
++ if (i_err & I2C_ERR_IRQSS_RXF_UFL)
++ priv->status |= FALCON_I2C_RX_UFL;
++
++ i2c_w32(i_err, err_irqsc);
++ }
++
++ /* burst request */
++ if (i_raw & I2C_RIS_BREQ_INT_INTOCC) {
++ i2c_w32_mask(I2C_IMSC_BREQ_INT_EN, 0, imsc);
++ i2c_w32_mask(0, I2C_ICR_BREQ_INT_CLR, icr);
++
++ priv->status |= FALCON_I2C_BURST_REQ;
++ }
++
++ /* last burst request */
++ if (i_raw & I2C_RIS_LBREQ_INT_INTOCC) {
++ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN, 0, imsc);
++ i2c_w32_mask(0, I2C_ICR_LBREQ_INT_CLR, icr);
++
++ priv->status |= FALCON_I2C_BURST_REQ;
++ }
++
++ if (old_status != (unsigned int)priv->status)
++ complete(&priv->done);
++
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ return IRQ_HANDLED;
++}
++
++static int falcon_i2c_ready(struct falcon_i2c *priv)
++{
++ int timeout;
++ u32 bus_stat;
++ unsigned long flags;
++ int ret;
++
++ for (timeout = 0; timeout < FALCON_I2C_READY_TIMEOUT; timeout++) {
++ bus_stat = i2c_r32(bus_stat);
++
++ if (bus_stat & I2C_BUS_STAT_BS_SC) {
++ cpu_relax();
++ } else {
++ spin_lock_irqsave(&priv->lock, flags);
++
++ if (FALCON_I2C_ERROR(priv)) {
++ ret = priv->status;
++
++ dev_dbg(priv->dev, "bus ready wait error 0x%08lx\n", priv->status);
++
++ FALCON_I2C_ERROR_CLEAR(priv);
++ } else {
++ ret = 0;
++ }
++
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ return ret;
++ }
++ }
++
++ dev_dbg(priv->dev, "bus ready wait timeout\n");
++
++ return -ETIME;
++}
++
++static int falcon_i2c_wait(struct falcon_i2c *priv, unsigned long status)
++{
++ int ret = 0;
++ unsigned long flags;
++ unsigned int timeout;
++
++ spin_lock_irqsave(&priv->lock, flags);
++
++ priv->status &= FALCON_I2C_BURST_REQ;
++
++ /* check if the event already occurred */
++ if ((priv->status & status) == status) {
++ priv->status &= ~status;
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ return 0;
++ }
++
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ /* unmask burst interrupts */
++ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
++
++ for (timeout = 0; timeout < FALCON_I2C_WAIT_TIMEOUT; timeout++) {
++ /* wait for the data request */
++ wait_for_completion_timeout(&priv->done, HZ / 10);
++
++ /* handle errors */
++ spin_lock_irqsave(&priv->lock, flags);
++
++ if (FALCON_I2C_ERROR(priv)) {
++ dev_dbg(priv->dev, "wait error 0x%08lx (waiting for 0x%08lx)\n",
++ priv->status,
++ status);
++
++ if (priv->status & FALCON_I2C_NACK)
++ ret = -ENXIO;
++ else
++ ret = -EREMOTEIO;
++
++ FALCON_I2C_ERROR_CLEAR(priv);
++ } else {
++ if ((priv->status & status) == status) {
++ priv->status &= ~status;
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ return 0;
++ }
++ }
++
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ if (ret)
++ return ret;
++ }
++
++ dev_dbg(priv->dev, "wait timeout error 0x%08lx (waiting for 0x%08lx)\n",
++ priv->status,
++ status);
++
++ return -ETIME;
++}
++
++static int falcon_i2c_tx(struct falcon_i2c *priv, int ten_bit, u16 addr,
++ u8 *buf, int len)
++{
++ int i;
++ int ret;
++
++ dev_dbg(priv->dev, "%s\n", __func__);
++
++ /* tell fifo the number of bytes we are going to send */
++ i2c_w32(len + (ten_bit ? 2 : 1), tps_ctrl);
++
++ /* wait for the data request */
++ ret = falcon_i2c_wait(priv, FALCON_I2C_BURST_REQ);
++ if (ret)
++ return ret;
++
++ /* send slave address */
++ if (ten_bit) {
++ i2c_w32(0x78 | ((addr >> 7) & 0x7), txd);
++ i2c_w32(0x78 | ((addr & 0x7f) << 1) | 0, txd);
++ } else {
++ i2c_w32((addr << 1) | 0, txd);
++ }
++
++ /* fill fifo */
++ for (i = 0; i < len; i++) {
++ ret = falcon_i2c_wait(priv, FALCON_I2C_BURST_REQ);
++ if (ret)
++ return ret;
++
++ i2c_w32(buf[i], txd);
++ }
++
++ return falcon_i2c_wait(priv, FALCON_I2C_TX_END);
++}
++
++static int falcon_i2c_rx(struct falcon_i2c *priv, int ten_bit, u16 addr,
++ u8 *buf, int len)
++{
++ int i;
++ int ret;
++
++ dev_dbg(priv->dev, "%s\n", __func__);
++
++ /* we need to transmit address only */
++ i2c_w32(ten_bit ? 2 : 1, tps_ctrl);
++
++ /* set maximum received packet size */
++ i2c_w32(len, mrps_ctrl);
++
++ /* wait for the data request */
++ ret = falcon_i2c_wait(priv, FALCON_I2C_BURST_REQ);
++ if (ret)
++ return ret;
++
++ /* write down the address */
++ if (ten_bit) {
++ i2c_w32(0x78 | ((addr >> 7) & 0x7), txd);
++ i2c_w32(0x78 | ((addr & 0x7f) << 1) | 1, txd);
++ } else {
++ i2c_w32((addr << 1) | 1, txd);
++ }
++
++ /* wait for the read request */
++ ret = falcon_i2c_wait(priv, FALCON_I2C_TX_END
++#ifndef FALCON_FIX_ME
++ | FALCON_I2C_ADDR_MATCH
++#endif
++ | FALCON_I2C_RX);
++
++ if (ret)
++ return ret;
++
++ /* read bytes */
++ for (i = 0; i < len; i++) {
++#ifdef FALCON_FIX_ME
++ while (i2c_r32(rps_stat) == 0)
++ cpu_relax();
++#else
++ ret = falcon_i2c_wait(priv, FALCON_I2C_BURST_REQ);
++
++ if (ret)
++ return ret;
++#endif
++
++ buf[i] = i2c_r32(rxd);
++ }
++
++#ifndef FALCON_FIX_ME
++ /* wait for transmission end */
++ return falcon_i2c_wait(priv, FALCON_I2C_TX_END);
++#else
++ return 0;
++#endif
++}
++
++static int falcon_i2c_xfer_msg(struct falcon_i2c *priv, struct i2c_msg *msg)
++{
++ int ret;
++ int ten_bit;
++ unsigned long flags;
++
++ dev_dbg(priv->dev, "%s %u byte(s) %s 0x%02x\n",
++ (msg->flags & I2C_M_RD) ? "read" : "write", msg->len,
++ (msg->flags & I2C_M_RD) ? "from" : "to", msg->addr);
++
++ if (msg->flags & I2C_M_TEN)
++ ten_bit = 1;
++ else
++ ten_bit = 0;
++
++ /* reconfigure bus if need to send message in different address mode */
++ spin_lock_irqsave(&priv->lock, flags);
++ if (ten_bit != priv->ten_bit) {
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++ /* reconfigure address */
++ falcon_addr_configure(priv, ten_bit);
++
++ /* enable bus */
++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++
++ priv->ten_bit = ten_bit;
++ }
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ /* read/write actual message */
++ if (msg->flags & I2C_M_RD)
++ ret = falcon_i2c_rx(priv, ten_bit, msg->addr, msg->buf,
++ msg->len);
++ else
++ ret = falcon_i2c_tx(priv, ten_bit, msg->addr, msg->buf,
++ msg->len);
++
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
++ int num)
++{
++ int i;
++ int ret;
++ unsigned long flags;
++ struct falcon_i2c *priv = i2c_get_adapdata(adap);
++
++ dev_dbg(priv->dev, "xfer %u messages\n", num);
++
++ /* transfer each message */
++ for (i = 0; i < num; i++) {
++#ifdef FALCON_FIX_ME
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++ /* enable bus */
++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++#endif
++
++ /* clear bus status */
++ spin_lock_irqsave(&priv->lock, flags);
++ priv->status = 0;
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ /* wait for the bus to become ready */
++ ret = falcon_i2c_ready(priv);
++ if (ret)
++ return ret;
++
++ /* transfer message */
++ ret = falcon_i2c_xfer_msg(priv, &msg[i]);
++
++ if (ret)
++ return ret;
++
++ /* check for unhandled errors */
++ spin_lock_irqsave(&priv->lock, flags);
++ if (FALCON_I2C_ERROR(priv))
++ ret = priv->status;
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ if (ret) {
++ dev_warn(priv->dev, "message %u unhandled error 0x%x\n",
++ i, ret);
++
++ return ret;
++ }
++ }
++
++ return 0;
++}
++
++static u32 falcon_i2c_func(struct i2c_adapter *adap)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm falcon_i2c_algorithm = {
++ .master_xfer = falcon_i2c_xfer,
++ .functionality = falcon_i2c_func,
++};
++
++static int falcon_i2c_hw_init(struct i2c_adapter *adap)
++{
++ struct falcon_i2c *priv = i2c_get_adapdata(adap);
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++ /* set normal operation clock divider */
++ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
++
++ /* set frequency */
++ if (priv->mode == FALCON_I2C_MODE_100) {
++ dev_dbg(priv->dev, "set standard mode (100 kHz)\n");
++
++ i2c_w32(0, fdiv_high_cfg);
++
++ i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET)
++ | (499 << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_cfg);
++ } else if (priv->mode == FALCON_I2C_MODE_400) {
++ dev_dbg(priv->dev, "set fast mode (400 kHz)\n");
++
++ i2c_w32(0, fdiv_high_cfg);
++
++ i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET)
++ | (124 << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_cfg);
++ } else if (priv->mode == FALCON_I2C_MODE_3400) {
++ dev_dbg(priv->dev, "set high mode (3.4 MHz)\n");
++
++ i2c_w32(0, fdiv_cfg);
++
++ /* TODO recalculate value for 100MHz input */
++ i2c_w32((41 << I2C_FDIV_CFG_INC_OFFSET)
++ | (152 << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_high_cfg);
++ } else {
++ dev_warn(priv->dev, "unknown mode\n");
++
++ return -ENODEV;
++ }
++
++ /* configure fifo */
++ i2c_w32(I2C_FIFO_CFG_TXFC /* tx fifo as flow controller */
++ | I2C_FIFO_CFG_RXFC /* rx fifo as flow controller */
++ | I2C_FIFO_CFG_TXFA_TXFA2 /* tx fifo 4-byte aligned */
++ | I2C_FIFO_CFG_RXFA_RXFA2 /* rx fifo 4-byte aligned */
++ | I2C_FIFO_CFG_TXBS_TXBS0 /* tx fifo burst size is 1 word */
++ | I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
++ fifo_cfg);
++
++ /* configure address */
++ falcon_addr_configure(priv, priv->ten_bit);
++
++ /* enable bus */
++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++
++ /* mask burst interrupts */
++ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
++
++ /* enable interrupts */
++ i2c_w32(I2C_IMSC_LBREQ_INT_EN
++ | I2C_IMSC_BREQ_INT_EN
++ | I2C_IMSC_I2C_P_INT_EN
++ | I2C_IMSC_I2C_ERR_INT_EN,
++ imsc);
++
++ return 0;
++}
++
++static int __devinit falcon_i2c_probe(struct platform_device *pdev)
++{
++ int ret = 0;
++ struct falcon_i2c *priv;
++ struct i2c_adapter *adap;
++ struct resource *mmres, *ioarea,
++ *irqres_lb, *irqres_b, *irqres_err, *irqres_p;
++ struct clk *clk;
++
++ dev_dbg(&pdev->dev, "probing\n");
++
++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++ "i2c_lb");
++ irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b");
++ irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++ "i2c_err");
++ irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p");
++
++ if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) {
++ dev_err(&pdev->dev, "no resources\n");
++ return -ENODEV;
++ }
++
++ clk = clk_get(&pdev->dev, "fpi");
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "failed to get fpi clk\n");
++ return -ENOENT;
++ }
++
++ if (clk_get_rate(clk) != 100000000) {
++ dev_err(&pdev->dev, "input clock is not 100MHz\n");
++ return -ENOENT;
++ }
++
++ /* allocate private data */
++ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
++ if (!priv) {
++ dev_err(&pdev->dev, "can't allocate private data\n");
++ return -ENOMEM;
++ }
++
++ adap = &priv->adap;
++ i2c_set_adapdata(adap, priv);
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
++ adap->algo = &falcon_i2c_algorithm;
++
++ priv->ten_bit = 0;
++ priv->mode = FALCON_I2C_MODE_100;
++ priv->clk = clk;
++ priv->dev = &pdev->dev;
++
++ spin_lock_init(&priv->lock);
++
++ ioarea = request_mem_region(mmres->start, resource_size(mmres),
++ pdev->name);
++
++ if (ioarea == NULL) {
++ dev_err(&pdev->dev, "I2C region already claimed\n");
++ ret = -ENXIO;
++ goto err_free_priv;
++ }
++
++ /* map memory */
++ priv->membase = ioremap_nocache(mmres->start & ~KSEG1,
++ resource_size(mmres));
++ if (priv->membase == NULL) {
++ ret = -ENOMEM;
++ goto err_release_region;
++ }
++
++ priv->irq_lb = irqres_lb->start;
++ ret = request_irq(priv->irq_lb, falcon_i2c_isr, IRQF_DISABLED,
++ irqres_lb->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get last burst IRQ %d\n", irqres_lb->start);
++ ret = -ENODEV;
++ goto err_unmap_mem;
++ }
++
++ priv->irq_b = irqres_b->start;
++ ret = request_irq(priv->irq_b, falcon_i2c_isr, IRQF_DISABLED,
++ irqres_b->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get burst IRQ %d\n", irqres_b->start);
++ ret = -ENODEV;
++ goto err_free_lb_irq;
++ }
++
++ priv->irq_err = irqres_err->start;
++ ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED,
++ irqres_err->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get error IRQ %d\n", irqres_err->start);
++ ret = -ENODEV;
++ goto err_free_b_irq;
++ }
++
++ priv->irq_p = irqres_p->start;
++ ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED,
++ irqres_p->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get protocol IRQ %d\n", irqres_p->start);
++ ret = -ENODEV;
++ goto err_free_err_irq;
++ }
++
++ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
++ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start,
++ irqres_b->start, irqres_err->start, irqres_p->start);
++
++ /* add our adapter to the i2c stack */
++ ret = i2c_add_numbered_adapter(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't register I2C adapter\n");
++ goto err_free_p_irq;
++ }
++
++ platform_set_drvdata(pdev, priv);
++ i2c_set_adapdata(adap, priv);
++
++ /* print module version information */
++ dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
++ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
++ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
++
++ init_completion(&priv->done);
++
++ /* initialize HW */
++ ret = falcon_i2c_hw_init(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't configure adapter\n");
++ goto err_remove_adapter;
++ }
++
++ return 0;
++
++err_remove_adapter:
++ i2c_del_adapter(adap);
++ platform_set_drvdata(pdev, NULL);
++
++err_free_p_irq:
++ free_irq(priv->irq_p, priv);
++
++err_free_err_irq:
++ free_irq(priv->irq_err, priv);
++
++err_free_b_irq:
++ free_irq(priv->irq_b, priv);
++
++err_free_lb_irq:
++ free_irq(priv->irq_lb, priv);
++
++err_unmap_mem:
++ iounmap(priv->membase);
++
++err_release_region:
++ release_mem_region(mmres->start, resource_size(mmres));
++
++err_free_priv:
++ kfree(priv);
++
++ return ret;
++}
++
++static int __devexit falcon_i2c_remove(struct platform_device *pdev)
++{
++ struct falcon_i2c *priv = platform_get_drvdata(pdev);
++ struct resource *mmres;
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++ /* remove driver */
++ platform_set_drvdata(pdev, NULL);
++ i2c_del_adapter(&priv->adap);
++
++ free_irq(priv->irq_lb, priv);
++ free_irq(priv->irq_b, priv);
++ free_irq(priv->irq_err, priv);
++ free_irq(priv->irq_p, priv);
++
++ kfree(priv);
++
++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ release_mem_region(mmres->start, resource_size(mmres));
++
++ dev_dbg(&pdev->dev, "removed\n");
++
++ return 0;
++}
++
++static struct platform_driver falcon_i2c_driver = {
++ .probe = falcon_i2c_probe,
++ .remove = __devexit_p(falcon_i2c_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init falcon_i2c_init(void)
++{
++ int ret;
++
++ ret = platform_driver_register(&falcon_i2c_driver);
++
++ if (ret)
++ printk(KERN_DEBUG DRV_NAME ": can't register platform driver");
++
++ return ret;
++}
++
++static void __exit falcon_i2c_exit(void)
++{
++ platform_driver_unregister(&falcon_i2c_driver);
++}
++
++module_init(falcon_i2c_init);
++module_exit(falcon_i2c_exit);
++
++MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter");
++MODULE_ALIAS("platform:i2c_falcon");
++MODULE_LICENSE("GPL");