summaryrefslogtreecommitdiffstats
path: root/target/linux/generic
diff options
context:
space:
mode:
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2012-02-07 11:28:06 +0000
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2012-02-07 11:28:06 +0000
commit6c242e52a8451894639dfd36b8744b7a84eaef95 (patch)
tree9c2d5ab351c25001c22687110253f305429202dd /target/linux/generic
parent68eac67f554c4730ac1ebd5406c353f46993f570 (diff)
kernel: add a recent upstream commit (post-3.3) to the ssb update patch, required for the next mac80211 update
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30345 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/generic')
-rw-r--r--target/linux/generic/patches-2.6.30/941-ssb_update.patch137
-rw-r--r--target/linux/generic/patches-2.6.31/941-ssb_update.patch137
-rw-r--r--target/linux/generic/patches-2.6.32/975-ssb_update.patch142
-rw-r--r--target/linux/generic/patches-2.6.36/941-ssb_update.patch142
-rw-r--r--target/linux/generic/patches-2.6.37/020-ssb_update.patch142
-rw-r--r--target/linux/generic/patches-2.6.38/020-ssb_update.patch139
-rw-r--r--target/linux/generic/patches-2.6.39/020-ssb_update.patch135
-rw-r--r--target/linux/generic/patches-3.0/020-ssb_update.patch125
-rw-r--r--target/linux/generic/patches-3.1/020-ssb_update.patch121
-rw-r--r--target/linux/generic/patches-3.2/020-ssb_update.patch132
-rw-r--r--target/linux/generic/patches-3.3/020-ssb_update.patch130
11 files changed, 1329 insertions, 153 deletions
diff --git a/target/linux/generic/patches-2.6.30/941-ssb_update.patch b/target/linux/generic/patches-2.6.30/941-ssb_update.patch
index 71f5b74a7..b27270aba 100644
--- a/target/linux/generic/patches-2.6.30/941-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.30/941-ssb_update.patch
@@ -225,7 +225,7 @@
* Copyright 2007, Broadcom Corporation
*
* Licensed under the GNU/GPL. See COPYING for details.
-@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
+@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
}
@@ -289,7 +289,7 @@
u32 pmucap;
if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon
+@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon
ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
@@ -1720,7 +1720,7 @@
static inline u8 ssb_crc8(u8 crc, u8 data)
{
-@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
+@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
int i;
for (i = 0; i < bus->sprom_size; i++)
@@ -1800,7 +1800,7 @@
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb
+@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
@@ -1809,7 +1809,17 @@
/* TODO - get remaining rev 4 stuff needed */
}
-@@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
/* extract the MAC address */
for (i = 0; i < 3; i++) {
@@ -1825,7 +1835,7 @@
SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
SSB_SPROM8_ANTAVAIL_A_SHIFT);
SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-@@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_
+@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_
SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
SSB_SPROM8_ITSSI_A_SHIFT);
@@ -1881,10 +1891,42 @@
/* Extract the antenna gain values. */
SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
-@@ -509,6 +607,31 @@ static void sprom_extract_r8(struct ssb_
+@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -1913,7 +1955,7 @@
/* TODO - get remaining rev 8 stuff needed */
}
-@@ -521,36 +644,34 @@ static int sprom_extract(struct ssb_bus
+@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
@@ -1971,7 +2013,7 @@
}
if (out->boardflags_lo == 0xFFFF)
-@@ -564,13 +685,34 @@ static int sprom_extract(struct ssb_bus
+@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
@@ -2009,7 +2051,7 @@
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
-@@ -580,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
if (!buf)
@@ -2039,7 +2081,7 @@
err = 0;
goto out_free;
}
-@@ -602,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
out_free:
kfree(buf);
@@ -2451,7 +2493,7 @@
}
bus->mmio = NULL;
bus->mapped_device = NULL;
-@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
+@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
SSB_BUG_ON(1); /* Can't reach this code. */
#endif
break;
@@ -3391,7 +3433,20 @@
#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,26 +25,62 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,26 +31,64 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -3458,10 +3513,12 @@
+ u16 boardflags2_lo; /* Board flags (bits 32-47) */
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
++
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
-@@ -58,14 +94,23 @@ struct ssb_sprom {
+@@ -58,14 +102,23 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -3487,7 +3544,7 @@
};
-@@ -137,7 +182,7 @@ struct ssb_device {
+@@ -137,7 +190,7 @@ struct ssb_device {
* is an optimization. */
const struct ssb_bus_ops *ops;
@@ -3496,7 +3553,7 @@
struct ssb_bus *bus;
struct ssb_device_id id;
-@@ -195,10 +240,9 @@ struct ssb_driver {
+@@ -195,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -3510,7 +3567,7 @@
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -208,6 +252,7 @@ enum ssb_bustype {
+@@ -208,6 +260,7 @@ enum ssb_bustype {
SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
@@ -3518,7 +3575,7 @@
};
/* board_vendor */
-@@ -238,20 +283,33 @@ struct ssb_bus {
+@@ -238,20 +291,33 @@ struct ssb_bus {
const struct ssb_bus_ops *ops;
@@ -3560,7 +3617,7 @@
#ifdef CONFIG_SSB_SPROM
/* Mutex to protect the SPROM writing. */
-@@ -260,7 +318,8 @@ struct ssb_bus {
+@@ -260,7 +326,8 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
@@ -3570,7 +3627,7 @@
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -306,6 +365,11 @@ struct ssb_bus {
+@@ -306,6 +373,11 @@ struct ssb_bus {
#endif /* DEBUG */
};
@@ -3582,7 +3639,7 @@
/* The initialization-invariants. */
struct ssb_init_invariants {
/* Versioning information about the PCB. */
-@@ -336,12 +400,23 @@ extern int ssb_bus_pcmciabus_register(st
+@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st
struct pcmcia_device *pcmcia_dev,
unsigned long baseaddr);
#endif /* CONFIG_SSB_PCMCIAHOST */
@@ -3607,7 +3664,7 @@
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -612,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
@@ -3876,7 +3933,7 @@
#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
-@@ -264,104 +267,257 @@
+@@ -264,104 +267,291 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
@@ -4117,6 +4174,39 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
+#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
@@ -4143,6 +4233,7 @@
+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1 0x00DA
+#define SSB_SPROM8_PA1HIB2 0x00DC
++
+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
diff --git a/target/linux/generic/patches-2.6.31/941-ssb_update.patch b/target/linux/generic/patches-2.6.31/941-ssb_update.patch
index e86ec9ba1..82c0ff3d9 100644
--- a/target/linux/generic/patches-2.6.31/941-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.31/941-ssb_update.patch
@@ -225,7 +225,7 @@
* Copyright 2007, Broadcom Corporation
*
* Licensed under the GNU/GPL. See COPYING for details.
-@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
+@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
}
@@ -289,7 +289,7 @@
u32 pmucap;
if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon
+@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon
ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
@@ -1577,7 +1577,7 @@
static inline u8 ssb_crc8(u8 crc, u8 data)
{
-@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
+@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
int i;
for (i = 0; i < bus->sprom_size; i++)
@@ -1657,7 +1657,7 @@
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb
+@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
@@ -1666,7 +1666,17 @@
/* TODO - get remaining rev 4 stuff needed */
}
-@@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
/* extract the MAC address */
for (i = 0; i < 3; i++) {
@@ -1682,7 +1692,7 @@
SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
SSB_SPROM8_ANTAVAIL_A_SHIFT);
SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-@@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_
+@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_
SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
SSB_SPROM8_ITSSI_A_SHIFT);
@@ -1738,10 +1748,42 @@
/* Extract the antenna gain values. */
SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
-@@ -509,6 +607,31 @@ static void sprom_extract_r8(struct ssb_
+@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -1770,7 +1812,7 @@
/* TODO - get remaining rev 8 stuff needed */
}
-@@ -521,36 +644,34 @@ static int sprom_extract(struct ssb_bus
+@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
@@ -1828,7 +1870,7 @@
}
if (out->boardflags_lo == 0xFFFF)
-@@ -564,13 +685,34 @@ static int sprom_extract(struct ssb_bus
+@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
@@ -1866,7 +1908,7 @@
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
-@@ -580,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
if (!buf)
@@ -1896,7 +1938,7 @@
err = 0;
goto out_free;
}
-@@ -602,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
out_free:
kfree(buf);
@@ -2292,7 +2334,7 @@
}
bus->mmio = NULL;
bus->mapped_device = NULL;
-@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
+@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
SSB_BUG_ON(1); /* Can't reach this code. */
#endif
break;
@@ -3199,7 +3241,20 @@
#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,26 +25,62 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,26 +31,64 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -3266,10 +3321,12 @@
+ u16 boardflags2_lo; /* Board flags (bits 32-47) */
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
++
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
-@@ -58,14 +94,23 @@ struct ssb_sprom {
+@@ -58,14 +102,23 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -3295,7 +3352,7 @@
};
-@@ -137,7 +182,7 @@ struct ssb_device {
+@@ -137,7 +190,7 @@ struct ssb_device {
* is an optimization. */
const struct ssb_bus_ops *ops;
@@ -3304,7 +3361,7 @@
struct ssb_bus *bus;
struct ssb_device_id id;
-@@ -195,10 +240,9 @@ struct ssb_driver {
+@@ -195,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -3318,7 +3375,7 @@
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -208,6 +252,7 @@ enum ssb_bustype {
+@@ -208,6 +260,7 @@ enum ssb_bustype {
SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
@@ -3326,7 +3383,7 @@
};
/* board_vendor */
-@@ -238,20 +283,33 @@ struct ssb_bus {
+@@ -238,20 +291,33 @@ struct ssb_bus {
const struct ssb_bus_ops *ops;
@@ -3368,7 +3425,7 @@
#ifdef CONFIG_SSB_SPROM
/* Mutex to protect the SPROM writing. */
-@@ -260,7 +318,8 @@ struct ssb_bus {
+@@ -260,7 +326,8 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
@@ -3378,7 +3435,7 @@
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -306,6 +365,11 @@ struct ssb_bus {
+@@ -306,6 +373,11 @@ struct ssb_bus {
#endif /* DEBUG */
};
@@ -3390,7 +3447,7 @@
/* The initialization-invariants. */
struct ssb_init_invariants {
/* Versioning information about the PCB. */
-@@ -336,12 +400,23 @@ extern int ssb_bus_pcmciabus_register(st
+@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st
struct pcmcia_device *pcmcia_dev,
unsigned long baseaddr);
#endif /* CONFIG_SSB_PCMCIAHOST */
@@ -3415,7 +3472,7 @@
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -612,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
@@ -3684,7 +3741,7 @@
#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
-@@ -264,104 +267,257 @@
+@@ -264,104 +267,291 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
@@ -3925,6 +3982,39 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
+#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
@@ -3951,6 +4041,7 @@
+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1 0x00DA
+#define SSB_SPROM8_PA1HIB2 0x00DC
++
+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
diff --git a/target/linux/generic/patches-2.6.32/975-ssb_update.patch b/target/linux/generic/patches-2.6.32/975-ssb_update.patch
index a619e6cc6..4d4d60853 100644
--- a/target/linux/generic/patches-2.6.32/975-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.32/975-ssb_update.patch
@@ -206,7 +206,7 @@
u32 pmucap;
if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon
+@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon
ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
@@ -1381,7 +1381,7 @@
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -470,6 +515,8 @@ static void sprom_extract_r45(struct ssb
+@@ -470,13 +515,21 @@ static void sprom_extract_r45(struct ssb
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
@@ -1390,10 +1390,56 @@
/* TODO - get remaining rev 4 stuff needed */
}
-@@ -560,6 +607,31 @@ static void sprom_extract_r8(struct ssb_
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -560,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -1422,7 +1468,7 @@
/* TODO - get remaining rev 8 stuff needed */
}
-@@ -572,37 +644,34 @@ static int sprom_extract(struct ssb_bus
+@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
@@ -1481,7 +1527,7 @@
}
if (out->boardflags_lo == 0xFFFF)
-@@ -616,15 +685,14 @@ static int sprom_extract(struct ssb_bus
+@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
@@ -1499,7 +1545,7 @@
/*
* get SPROM offset: SSB_SPROM_BASE1 except for
* chipcommon rev >= 31 or chip ID is 0x4312 and
-@@ -644,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -644,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
@@ -1508,7 +1554,7 @@
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
-@@ -654,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -654,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
if (!buf)
@@ -1538,7 +1584,7 @@
err = 0;
goto out_free;
}
-@@ -676,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -676,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
out_free:
kfree(buf);
@@ -2115,7 +2161,20 @@
#endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,8 +25,10 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,8 +31,10 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -2127,7 +2186,7 @@
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
-@@ -55,6 +57,10 @@ struct ssb_sprom {
+@@ -55,6 +63,10 @@ struct ssb_sprom {
u8 tri5gl; /* 5.2GHz TX isolation */
u8 tri5g; /* 5.3GHz TX isolation */
u8 tri5gh; /* 5.8GHz TX isolation */
@@ -2138,7 +2197,16 @@
u8 rxpo2g; /* 2GHz RX power offset */
u8 rxpo5g; /* 5GHz RX power offset */
u8 rssisav2g; /* 2GHz RSSI params */
-@@ -88,6 +94,15 @@ struct ssb_sprom {
+@@ -76,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+@@ -88,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -2154,7 +2222,7 @@
/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
-@@ -95,7 +110,7 @@ struct ssb_sprom {
+@@ -95,7 +118,7 @@ struct ssb_sprom {
struct ssb_boardinfo {
u16 vendor;
u16 type;
@@ -2163,7 +2231,7 @@
};
-@@ -167,7 +182,7 @@ struct ssb_device {
+@@ -167,7 +190,7 @@ struct ssb_device {
* is an optimization. */
const struct ssb_bus_ops *ops;
@@ -2172,7 +2240,7 @@
struct ssb_bus *bus;
struct ssb_device_id id;
-@@ -225,10 +240,9 @@ struct ssb_driver {
+@@ -225,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -2186,7 +2254,7 @@
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -269,7 +283,8 @@ struct ssb_bus {
+@@ -269,7 +291,8 @@ struct ssb_bus {
const struct ssb_bus_ops *ops;
@@ -2196,7 +2264,7 @@
struct ssb_device *mapped_device;
union {
/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
-@@ -281,14 +296,17 @@ struct ssb_bus {
+@@ -281,14 +304,17 @@ struct ssb_bus {
* On PCMCIA-host busses this is used to protect the whole MMIO access. */
spinlock_t bar_lock;
@@ -2221,7 +2289,7 @@
/* See enum ssb_quirks */
unsigned int quirks;
-@@ -300,7 +318,7 @@ struct ssb_bus {
+@@ -300,7 +326,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
@@ -2230,7 +2298,7 @@
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -396,7 +414,9 @@ extern bool ssb_is_sprom_available(struc
+@@ -396,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
@@ -2241,7 +2309,7 @@
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -667,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
@@ -2607,7 +2675,7 @@
#define SSB_SPROM8_RSSISMF5G 0x000F
#define SSB_SPROM8_RSSISMC5G 0x00F0
#define SSB_SPROM8_RSSISMC5G_SHIFT 4
-@@ -374,47 +420,104 @@
+@@ -374,47 +420,138 @@
#define SSB_SPROM8_RSSISAV5G_SHIFT 8
#define SSB_SPROM8_BXA5G 0x1800
#define SSB_SPROM8_BXA5G_SHIFT 11
@@ -2644,6 +2712,39 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
@@ -2687,6 +2788,7 @@
+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1 0x00DA
+#define SSB_SPROM8_PA1HIB2 0x00DC
++
+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
diff --git a/target/linux/generic/patches-2.6.36/941-ssb_update.patch b/target/linux/generic/patches-2.6.36/941-ssb_update.patch
index e634a4a46..80abe6597 100644
--- a/target/linux/generic/patches-2.6.36/941-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.36/941-ssb_update.patch
@@ -417,7 +417,7 @@
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -471,6 +515,8 @@ static void sprom_extract_r45(struct ssb
+@@ -471,13 +515,21 @@ static void sprom_extract_r45(struct ssb
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
@@ -426,10 +426,56 @@
/* TODO - get remaining rev 4 stuff needed */
}
-@@ -561,6 +607,31 @@ static void sprom_extract_r8(struct ssb_
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -561,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -458,7 +504,7 @@
/* TODO - get remaining rev 8 stuff needed */
}
-@@ -573,37 +644,34 @@ static int sprom_extract(struct ssb_bus
+@@ -573,37 +682,34 @@ static int sprom_extract(struct ssb_bus
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
@@ -517,7 +563,7 @@
}
if (out->boardflags_lo == 0xFFFF)
-@@ -617,15 +685,14 @@ static int sprom_extract(struct ssb_bus
+@@ -617,15 +723,14 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
@@ -535,7 +581,7 @@
/*
* get SPROM offset: SSB_SPROM_BASE1 except for
* chipcommon rev >= 31 or chip ID is 0x4312 and
-@@ -645,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -645,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
@@ -544,7 +590,7 @@
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
-@@ -655,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -655,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
if (!buf)
@@ -574,7 +620,7 @@
err = 0;
goto out_free;
}
-@@ -677,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -677,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
out_free:
kfree(buf);
@@ -711,7 +757,20 @@
}
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,8 +25,10 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,8 +31,10 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -723,7 +782,7 @@
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
-@@ -55,6 +57,10 @@ struct ssb_sprom {
+@@ -55,6 +63,10 @@ struct ssb_sprom {
u8 tri5gl; /* 5.2GHz TX isolation */
u8 tri5g; /* 5.3GHz TX isolation */
u8 tri5gh; /* 5.8GHz TX isolation */
@@ -734,7 +793,16 @@
u8 rxpo2g; /* 2GHz RX power offset */
u8 rxpo5g; /* 5GHz RX power offset */
u8 rssisav2g; /* 2GHz RSSI params */
-@@ -88,6 +94,15 @@ struct ssb_sprom {
+@@ -76,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+@@ -88,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -750,7 +818,7 @@
/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
-@@ -95,7 +110,7 @@ struct ssb_sprom {
+@@ -95,7 +118,7 @@ struct ssb_sprom {
struct ssb_boardinfo {
u16 vendor;
u16 type;
@@ -759,7 +827,7 @@
};
-@@ -225,10 +240,9 @@ struct ssb_driver {
+@@ -225,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -773,7 +841,7 @@
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -304,7 +318,7 @@ struct ssb_bus {
+@@ -304,7 +326,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
@@ -782,7 +850,7 @@
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -400,7 +414,9 @@ extern bool ssb_is_sprom_available(struc
+@@ -400,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
@@ -793,7 +861,7 @@
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -514,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -514,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
@@ -916,7 +984,7 @@
#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
-@@ -386,6 +432,23 @@
+@@ -386,6 +432,56 @@
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
@@ -937,10 +1005,50 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -416,6 +479,46 @@
+@@ -410,12 +506,53 @@
+ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+ #define SSB_SPROM8_PA1HIB1 0x00DA
+ #define SSB_SPROM8_PA1HIB2 0x00DC
++
+ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
diff --git a/target/linux/generic/patches-2.6.37/020-ssb_update.patch b/target/linux/generic/patches-2.6.37/020-ssb_update.patch
index b71b67598..d773a4fc9 100644
--- a/target/linux/generic/patches-2.6.37/020-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.37/020-ssb_update.patch
@@ -417,7 +417,7 @@
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -471,6 +515,8 @@ static void sprom_extract_r45(struct ssb
+@@ -471,13 +515,21 @@ static void sprom_extract_r45(struct ssb
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
@@ -426,10 +426,56 @@
/* TODO - get remaining rev 4 stuff needed */
}
-@@ -561,6 +607,31 @@ static void sprom_extract_r8(struct ssb_
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -561,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -458,7 +504,7 @@
/* TODO - get remaining rev 8 stuff needed */
}
-@@ -573,37 +644,34 @@ static int sprom_extract(struct ssb_bus
+@@ -573,37 +682,34 @@ static int sprom_extract(struct ssb_bus
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
@@ -517,7 +563,7 @@
}
if (out->boardflags_lo == 0xFFFF)
-@@ -617,15 +685,14 @@ static int sprom_extract(struct ssb_bus
+@@ -617,15 +723,14 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
@@ -535,7 +581,7 @@
/*
* get SPROM offset: SSB_SPROM_BASE1 except for
* chipcommon rev >= 31 or chip ID is 0x4312 and
-@@ -645,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -645,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
@@ -544,7 +590,7 @@
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
-@@ -655,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -655,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
if (!buf)
@@ -574,7 +620,7 @@
err = 0;
goto out_free;
}
-@@ -677,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -677,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
out_free:
kfree(buf);
@@ -711,7 +757,20 @@
}
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,8 +25,10 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,8 +31,10 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -723,7 +782,7 @@
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
-@@ -55,6 +57,10 @@ struct ssb_sprom {
+@@ -55,6 +63,10 @@ struct ssb_sprom {
u8 tri5gl; /* 5.2GHz TX isolation */
u8 tri5g; /* 5.3GHz TX isolation */
u8 tri5gh; /* 5.8GHz TX isolation */
@@ -734,7 +793,16 @@
u8 rxpo2g; /* 2GHz RX power offset */
u8 rxpo5g; /* 5GHz RX power offset */
u8 rssisav2g; /* 2GHz RSSI params */
-@@ -88,6 +94,15 @@ struct ssb_sprom {
+@@ -76,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+@@ -88,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -750,7 +818,7 @@
/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
-@@ -95,7 +110,7 @@ struct ssb_sprom {
+@@ -95,7 +118,7 @@ struct ssb_sprom {
struct ssb_boardinfo {
u16 vendor;
u16 type;
@@ -759,7 +827,7 @@
};
-@@ -225,10 +240,9 @@ struct ssb_driver {
+@@ -225,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -773,7 +841,7 @@
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -304,7 +318,7 @@ struct ssb_bus {
+@@ -304,7 +326,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
@@ -782,7 +850,7 @@
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -400,7 +414,9 @@ extern bool ssb_is_sprom_available(struc
+@@ -400,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
@@ -793,7 +861,7 @@
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -514,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -514,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
@@ -888,7 +956,7 @@
#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
-@@ -387,6 +432,23 @@
+@@ -387,6 +432,56 @@
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
@@ -909,10 +977,50 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -417,6 +479,46 @@
+@@ -411,12 +506,53 @@
+ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+ #define SSB_SPROM8_PA1HIB1 0x00DA
+ #define SSB_SPROM8_PA1HIB2 0x00DC
++
+ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
diff --git a/target/linux/generic/patches-2.6.38/020-ssb_update.patch b/target/linux/generic/patches-2.6.38/020-ssb_update.patch
index a72a39b8b..41556285e 100644
--- a/target/linux/generic/patches-2.6.38/020-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.38/020-ssb_update.patch
@@ -326,10 +326,57 @@
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -603,6 +607,29 @@ static void sprom_extract_r8(struct ssb_
+@@ -519,7 +523,13 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -603,6 +613,61 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -356,7 +403,7 @@
sprom_extract_r458(out, in);
/* TODO - get remaining rev 8 stuff needed */
-@@ -641,7 +668,7 @@ static int sprom_extract(struct ssb_bus
+@@ -641,7 +706,7 @@ static int sprom_extract(struct ssb_bus
break;
default:
ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
@@ -365,7 +412,7 @@
" v1\n", out->revision);
out->revision = 1;
sprom_extract_r123(out, in);
-@@ -658,7 +685,6 @@ static int sprom_extract(struct ssb_bus
+@@ -658,7 +723,6 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
@@ -373,7 +420,7 @@
int err;
u16 *buf;
-@@ -666,7 +692,7 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -666,7 +730,7 @@ static int ssb_pci_sprom_get(struct ssb_
ssb_printk(KERN_ERR PFX "No SPROM available!\n");
return -ENODEV;
}
@@ -382,7 +429,7 @@
/*
* get SPROM offset: SSB_SPROM_BASE1 except for
* chipcommon rev >= 31 or chip ID is 0x4312 and
-@@ -703,10 +729,17 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -703,10 +767,17 @@ static int ssb_pci_sprom_get(struct ssb_
if (err) {
/* All CRC attempts failed.
* Maybe there is no SPROM on the device?
@@ -404,7 +451,7 @@
err = 0;
goto out_free;
}
-@@ -724,12 +757,9 @@ out_free:
+@@ -724,12 +795,9 @@ out_free:
static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
struct ssb_boardinfo *bi)
{
@@ -460,7 +507,7 @@
#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
-@@ -427,6 +432,23 @@
+@@ -427,6 +432,56 @@
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
@@ -481,10 +528,50 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -457,6 +479,46 @@
+@@ -451,12 +506,53 @@
+ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+ #define SSB_SPROM8_PA1HIB1 0x00DA
+ #define SSB_SPROM8_PA1HIB2 0x00DC
++
+ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
@@ -1248,7 +1335,20 @@
/* core.c */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,8 +25,10 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,8 +31,10 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -1260,7 +1360,16 @@
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
-@@ -92,6 +94,15 @@ struct ssb_sprom {
+@@ -80,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+@@ -92,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -1276,7 +1385,7 @@
/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
-@@ -99,7 +110,7 @@ struct ssb_sprom {
+@@ -99,7 +118,7 @@ struct ssb_sprom {
struct ssb_boardinfo {
u16 vendor;
u16 type;
@@ -1285,7 +1394,7 @@
};
-@@ -229,10 +240,9 @@ struct ssb_driver {
+@@ -229,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -1299,7 +1408,7 @@
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -308,7 +318,7 @@ struct ssb_bus {
+@@ -308,7 +326,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
@@ -1308,7 +1417,7 @@
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -404,7 +414,9 @@ extern bool ssb_is_sprom_available(struc
+@@ -404,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
@@ -1319,7 +1428,7 @@
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -518,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -518,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
diff --git a/target/linux/generic/patches-2.6.39/020-ssb_update.patch b/target/linux/generic/patches-2.6.39/020-ssb_update.patch
index be7071b93..8113bca68 100644
--- a/target/linux/generic/patches-2.6.39/020-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.39/020-ssb_update.patch
@@ -787,10 +787,57 @@
* Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
-@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_
+@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -817,7 +864,7 @@
sprom_extract_r458(out, in);
/* TODO - get remaining rev 8 stuff needed */
-@@ -662,7 +685,6 @@ static int sprom_extract(struct ssb_bus
+@@ -662,7 +723,6 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
@@ -825,7 +872,7 @@
int err;
u16 *buf;
-@@ -707,10 +729,17 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -707,10 +767,17 @@ static int ssb_pci_sprom_get(struct ssb_
if (err) {
/* All CRC attempts failed.
* Maybe there is no SPROM on the device?
@@ -847,7 +894,7 @@
err = 0;
goto out_free;
}
-@@ -728,12 +757,9 @@ out_free:
+@@ -728,12 +795,9 @@ out_free:
static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
struct ssb_boardinfo *bi)
{
@@ -1024,7 +1071,20 @@
/* core.c */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,8 +25,10 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,8 +31,10 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -1036,7 +1096,16 @@
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
-@@ -92,6 +94,15 @@ struct ssb_sprom {
+@@ -80,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+@@ -92,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -1052,7 +1121,7 @@
/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
-@@ -99,7 +110,7 @@ struct ssb_sprom {
+@@ -99,7 +118,7 @@ struct ssb_sprom {
struct ssb_boardinfo {
u16 vendor;
u16 type;
@@ -1061,7 +1130,7 @@
};
-@@ -229,10 +240,9 @@ struct ssb_driver {
+@@ -229,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -1075,7 +1144,7 @@
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -308,7 +318,7 @@ struct ssb_bus {
+@@ -308,7 +326,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
@@ -1084,7 +1153,7 @@
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -404,7 +414,9 @@ extern bool ssb_is_sprom_available(struc
+@@ -404,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
@@ -1095,7 +1164,7 @@
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -518,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -518,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
@@ -1157,7 +1226,7 @@
#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
-@@ -432,6 +432,23 @@
+@@ -432,6 +432,56 @@
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
@@ -1178,10 +1247,50 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -462,6 +479,46 @@
+@@ -456,12 +506,53 @@
+ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+ #define SSB_SPROM8_PA1HIB1 0x00DA
+ #define SSB_SPROM8_PA1HIB2 0x00DC
++
+ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
diff --git a/target/linux/generic/patches-3.0/020-ssb_update.patch b/target/linux/generic/patches-3.0/020-ssb_update.patch
index 74fb28c84..5a7715410 100644
--- a/target/linux/generic/patches-3.0/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.0/020-ssb_update.patch
@@ -322,10 +322,57 @@
* Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
-@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_
+@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -352,7 +399,7 @@
sprom_extract_r458(out, in);
/* TODO - get remaining rev 8 stuff needed */
-@@ -734,12 +757,9 @@ out_free:
+@@ -734,12 +795,9 @@ out_free:
static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
struct ssb_boardinfo *bi)
{
@@ -455,7 +502,20 @@
* Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,8 +25,10 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,8 +31,10 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -467,7 +527,16 @@
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
-@@ -92,6 +94,15 @@ struct ssb_sprom {
+@@ -80,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+@@ -92,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -483,7 +552,7 @@
/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
-@@ -99,7 +110,7 @@ struct ssb_sprom {
+@@ -99,7 +118,7 @@ struct ssb_sprom {
struct ssb_boardinfo {
u16 vendor;
u16 type;
@@ -492,7 +561,7 @@
};
-@@ -229,10 +240,9 @@ struct ssb_driver {
+@@ -229,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -519,7 +588,7 @@
*/
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -432,6 +432,23 @@
+@@ -432,6 +432,56 @@
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
@@ -540,10 +609,50 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -462,6 +479,46 @@
+@@ -456,12 +506,53 @@
+ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+ #define SSB_SPROM8_PA1HIB1 0x00DA
+ #define SSB_SPROM8_PA1HIB2 0x00DC
++
+ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
diff --git a/target/linux/generic/patches-3.1/020-ssb_update.patch b/target/linux/generic/patches-3.1/020-ssb_update.patch
index c67097b3e..843f97044 100644
--- a/target/linux/generic/patches-3.1/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.1/020-ssb_update.patch
@@ -58,10 +58,57 @@
}
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
-@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_
+@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -90,7 +137,20 @@
/* TODO - get remaining rev 8 stuff needed */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -25,7 +25,7 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,7 +31,7 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
@@ -99,7 +159,16 @@
u8 country_code; /* Country Code */
u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
-@@ -94,6 +94,15 @@ struct ssb_sprom {
+@@ -82,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+@@ -94,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -115,7 +184,7 @@
/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
-@@ -231,10 +240,9 @@ struct ssb_driver {
+@@ -231,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -131,7 +200,7 @@
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -432,6 +432,23 @@
+@@ -432,6 +432,56 @@
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
@@ -152,10 +221,50 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -462,6 +479,46 @@
+@@ -456,12 +506,53 @@
+ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+ #define SSB_SPROM8_PA1HIB1 0x00DA
+ #define SSB_SPROM8_PA1HIB2 0x00DC
++
+ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
diff --git a/target/linux/generic/patches-3.2/020-ssb_update.patch b/target/linux/generic/patches-3.2/020-ssb_update.patch
index 9e7bff934..ca686f361 100644
--- a/target/linux/generic/patches-3.2/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.2/020-ssb_update.patch
@@ -1,9 +1,56 @@
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
-@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_
+@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -32,7 +79,29 @@
/* TODO - get remaining rev 8 stuff needed */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -94,6 +94,15 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -82,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+@@ -94,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
@@ -50,7 +119,7 @@
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -432,6 +432,23 @@
+@@ -432,6 +432,56 @@
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
@@ -71,13 +140,56 @@
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -464,6 +481,46 @@
+@@ -456,6 +506,7 @@
+ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+ #define SSB_SPROM8_PA1HIB1 0x00DA
+ #define SSB_SPROM8_PA1HIB2 0x00DC
++
+ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
+@@ -502,6 +553,46 @@
+ #define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */
+ #define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */
- /* Values for boardflags_lo read from SPROM */
- #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
++/* Values for boardflags_lo read from SPROM */
++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
+#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
+#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
+#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
@@ -116,8 +228,6 @@
+#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */
+#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */
+
-+/* Values for boardflags_lo read from SPROM */
-+#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
- #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
- #define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
- #define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {
+ SSB_SPROM1CCODE_WORLD = 0,
diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch
new file mode 100644
index 000000000..4435315d3
--- /dev/null
+++ b/target/linux/generic/patches-3.3/020-ssb_update.patch
@@ -0,0 +1,130 @@
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+@@ -607,6 +613,38 @@ static void sprom_extract_r8(struct ssb_
+ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+ sizeof(out->antenna_gain.ghz5));
+
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -82,6 +88,8 @@ struct ssb_sprom {
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
+
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
++
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+ * loss in the connectors is bigger than the gain. */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -449,6 +449,39 @@
+ #define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+ #define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+ #define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
+ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
+ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
+ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
+@@ -473,6 +506,7 @@
+ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+ #define SSB_SPROM8_PA1HIB1 0x00DA
+ #define SSB_SPROM8_PA1HIB2 0x00DC
++
+ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 14:30:44 +0000