kernel: update bcma and ssb to master-2013-01-09 from wireless-testing

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35080 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 1041 insertions, 152 deletions

diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch
index bfcb556b0..3a3afd020 100644
--- a/target/linux/generic/patches-3.3/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.3/020-ssb_update.patch
@@ -1,3 +1,75 @@
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -43,8 +43,8 @@ static void early_nvram_init(void)
+ #ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
+-		base = mcore_ssb->flash_window;
+-		lim = mcore_ssb->flash_window_size;
++		base = mcore_ssb->pflash.window;
++		lim = mcore_ssb->pflash.window_size;
+ 		break;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ b/arch/mips/bcm47xx/wgt634u.c
+@@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
+ 					    SSB_CHIPCO_IRQ_GPIO);
+ 		}
+ 
+-		wgt634u_flash_data.width = mcore->flash_buswidth;
+-		wgt634u_flash_resource.start = mcore->flash_window;
+-		wgt634u_flash_resource.end = mcore->flash_window
+-					   + mcore->flash_window_size
++		wgt634u_flash_data.width = mcore->pflash.buswidth;
++		wgt634u_flash_resource.start = mcore->pflash.window;
++		wgt634u_flash_resource.end = mcore->pflash.window
++					   + mcore->pflash.window_size
+ 					   - 1;
+ 		return platform_add_devices(wgt634u_devices,
+ 					    ARRAY_SIZE(wgt634u_devices));
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS
+ 
+ 	  If unsure, say N
+ 
++config SSB_SFLASH
++	bool "SSB serial flash support"
++	depends on SSB_DRIVER_MIPS && BROKEN
++	default y
++
+ # Assumption: We are on embedded, if we compile the MIPS core.
+ config SSB_EMBEDDED
+ 	bool
+@@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE
+ 
+ 	  If unsure, say N
+ 
++config SSB_DRIVER_GPIO
++	bool "SSB GPIO driver"
++	depends on SSB && GPIOLIB
++	help
++	  Driver to provide access to the GPIO pins on the bus.
++
++	  If unsure, say N
++
+ endmenu
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
+@@ -11,10 +11,12 @@ ssb-$(CONFIG_SSB_SDIOHOST)		+= sdio.o
+ # built-in drivers
+ ssb-y					+= driver_chipcommon.o
+ ssb-y					+= driver_chipcommon_pmu.o
++ssb-$(CONFIG_SSB_SFLASH)		+= driver_chipcommon_sflash.o
+ ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
+ ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
+ ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
+ ssb-$(CONFIG_SSB_DRIVER_GIGE)		+= driver_gige.o
++ssb-$(CONFIG_SSB_DRIVER_GPIO)		+= driver_gpio.o
+ 
+ # b43 pci-ssb-bridge driver
+ # Not strictly a part of SSB, but kept here for convenience
 --- a/drivers/ssb/b43_pci_bridge.c
 +++ b/drivers/ssb/b43_pci_bridge.c
 @@ -29,11 +29,15 @@ static const struct pci_device_id b43_pc
@@ -34,7 +106,7 @@
  
  #include "ssb_private.h"
  
-@@ -280,6 +282,69 @@ static void calc_fast_powerup_delay(stru
+@@ -280,10 +282,76 @@ static void calc_fast_powerup_delay(stru
  	cc->fast_pwrup_delay = tmp;
  }
  
@@ -104,7 +176,14 @@
  void ssb_chipcommon_init(struct ssb_chipcommon *cc)
  {
  	if (!cc->dev)
-@@ -297,6 +362,11 @@ void ssb_chipcommon_init(struct ssb_chip
+ 		return; /* We don't have a ChipCommon */
++
++	spin_lock_init(&cc->gpio_lock);
++
+ 	if (cc->dev->id.revision >= 11)
+ 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ 	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+@@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip
  	chipco_powercontrol_init(cc);
  	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
  	calc_fast_powerup_delay(cc);
@@ -116,7 +195,7 @@
  }
  
  void ssb_chipco_suspend(struct ssb_chipcommon *cc)
-@@ -395,10 +465,27 @@ void ssb_chipco_timing_init(struct ssb_c
+@@ -395,10 +468,27 @@ void ssb_chipco_timing_init(struct ssb_c
  }
  
  /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
@@ -147,7 +226,106 @@
  }
  
  void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
-@@ -473,12 +560,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+@@ -418,28 +508,93 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco
+ 
+ u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+-	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+-	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+-	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ EXPORT_SYMBOL(ssb_chipco_gpio_control);
+ 
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+-	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+-	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
++}
++
++u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res = 0;
++
++	if (cc->dev->id.revision < 20)
++		return 0xffffffff;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLUP, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
++}
++
++u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res = 0;
++
++	if (cc->dev->id.revision < 20)
++		return 0xffffffff;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLDOWN, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ #ifdef CONFIG_SSB_SERIAL
+@@ -473,12 +628,7 @@ int ssb_chipco_serial_init(struct ssb_ch
  				       chipco_read32(cc, SSB_CHIPCO_CORECTL)
  				       | SSB_CHIPCO_CORECTL_UARTCLK0);
  		} else if ((ccrev >= 11) && (ccrev != 15)) {
@@ -288,9 +466,30 @@
 +		return 0;
 +	}
 +}
+--- /dev/null
++++ b/drivers/ssb/driver_chipcommon_sflash.c
+@@ -0,0 +1,18 @@
++/*
++ * Sonics Silicon Backplane
++ * ChipCommon serial flash interface
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/ssb/ssb.h>
++
++#include "ssb_private.h"
++
++/* Initialize serial flash access */
++int ssb_sflash_init(struct ssb_chipcommon *cc)
++{
++	pr_err("Serial flash support is not implemented yet!\n");
++
++	return -ENOTSUPP;
++}
 --- a/drivers/ssb/driver_extif.c
 +++ b/drivers/ssb/driver_extif.c
-@@ -112,10 +112,30 @@ void ssb_extif_get_clockcontrol(struct s
+@@ -112,10 +112,37 @@ void ssb_extif_get_clockcontrol(struct s
  	*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
  }
  
@@ -320,9 +519,250 @@
  	extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
 +
 +	return ticks;
++}
++
++void ssb_extif_init(struct ssb_extif *extif)
++{
++	if (!extif->dev)
++		return; /* We don't have a Extif core */
++	spin_lock_init(&extif->gpio_lock);
  }
  
  u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
+@@ -125,22 +152,50 @@ u32 ssb_extif_gpio_in(struct ssb_extif *
+ 
+ u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
+ {
+-	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&extif->gpio_lock, flags);
++	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
+ 				   mask, value);
++	spin_unlock_irqrestore(&extif->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
+ {
+-	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&extif->gpio_lock, flags);
++	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
+ 				   mask, value);
++	spin_unlock_irqrestore(&extif->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
+ {
+-	return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&extif->gpio_lock, flags);
++	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
++	spin_unlock_irqrestore(&extif->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
+ {
+-	return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&extif->gpio_lock, flags);
++	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
++	spin_unlock_irqrestore(&extif->gpio_lock, flags);
++
++	return res;
+ }
+--- /dev/null
++++ b/drivers/ssb/driver_gpio.c
+@@ -0,0 +1,176 @@
++/*
++ * Sonics Silicon Backplane
++ * GPIO driver
++ *
++ * Copyright 2011, Broadcom Corporation
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/gpio.h>
++#include <linux/export.h>
++#include <linux/ssb/ssb.h>
++
++#include "ssb_private.h"
++
++static struct ssb_bus *ssb_gpio_get_bus(struct gpio_chip *chip)
++{
++	return container_of(chip, struct ssb_bus, gpio);
++}
++
++static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	return !!ssb_chipco_gpio_in(&bus->chipco, 1 << gpio);
++}
++
++static void ssb_gpio_chipco_set_value(struct gpio_chip *chip, unsigned gpio,
++				      int value)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int ssb_gpio_chipco_direction_input(struct gpio_chip *chip,
++					   unsigned gpio)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 0);
++	return 0;
++}
++
++static int ssb_gpio_chipco_direction_output(struct gpio_chip *chip,
++					    unsigned gpio, int value)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 1 << gpio);
++	ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0);
++	return 0;
++}
++
++static int ssb_gpio_chipco_request(struct gpio_chip *chip, unsigned gpio)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	ssb_chipco_gpio_control(&bus->chipco, 1 << gpio, 0);
++	/* clear pulldown */
++	ssb_chipco_gpio_pulldown(&bus->chipco, 1 << gpio, 0);
++	/* Set pullup */
++	ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 1 << gpio);
++
++	return 0;
++}
++
++static void ssb_gpio_chipco_free(struct gpio_chip *chip, unsigned gpio)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	/* clear pullup */
++	ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
++}
++
++static int ssb_gpio_chipco_init(struct ssb_bus *bus)
++{
++	struct gpio_chip *chip = &bus->gpio;
++
++	chip->label		= "ssb_chipco_gpio";
++	chip->owner		= THIS_MODULE;
++	chip->request		= ssb_gpio_chipco_request;
++	chip->free		= ssb_gpio_chipco_free;
++	chip->get		= ssb_gpio_chipco_get_value;
++	chip->set		= ssb_gpio_chipco_set_value;
++	chip->direction_input	= ssb_gpio_chipco_direction_input;
++	chip->direction_output	= ssb_gpio_chipco_direction_output;
++	chip->ngpio		= 16;
++	/* There is just one SoC in one device and its GPIO addresses should be
++	 * deterministic to address them more easily. The other buses could get
++	 * a random base number. */
++	if (bus->bustype == SSB_BUSTYPE_SSB)
++		chip->base		= 0;
++	else
++		chip->base		= -1;
++
++	return gpiochip_add(chip);
++}
++
++#ifdef CONFIG_SSB_DRIVER_EXTIF
++
++static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	return !!ssb_extif_gpio_in(&bus->extif, 1 << gpio);
++}
++
++static void ssb_gpio_extif_set_value(struct gpio_chip *chip, unsigned gpio,
++				     int value)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int ssb_gpio_extif_direction_input(struct gpio_chip *chip,
++					  unsigned gpio)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 0);
++	return 0;
++}
++
++static int ssb_gpio_extif_direction_output(struct gpio_chip *chip,
++					   unsigned gpio, int value)
++{
++	struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++	ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 1 << gpio);
++	ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0);
++	return 0;
++}
++
++static int ssb_gpio_extif_init(struct ssb_bus *bus)
++{
++	struct gpio_chip *chip = &bus->gpio;
++
++	chip->label		= "ssb_extif_gpio";
++	chip->owner		= THIS_MODULE;
++	chip->get		= ssb_gpio_extif_get_value;
++	chip->set		= ssb_gpio_extif_set_value;
++	chip->direction_input	= ssb_gpio_extif_direction_input;
++	chip->direction_output	= ssb_gpio_extif_direction_output;
++	chip->ngpio		= 5;
++	/* There is just one SoC in one device and its GPIO addresses should be
++	 * deterministic to address them more easily. The other buses could get
++	 * a random base number. */
++	if (bus->bustype == SSB_BUSTYPE_SSB)
++		chip->base		= 0;
++	else
++		chip->base		= -1;
++
++	return gpiochip_add(chip);
++}
++
++#else
++static int ssb_gpio_extif_init(struct ssb_bus *bus)
++{
++	return -ENOTSUPP;
++}
++#endif
++
++int ssb_gpio_init(struct ssb_bus *bus)
++{
++	if (ssb_chipco_available(&bus->chipco))
++		return ssb_gpio_chipco_init(bus);
++	else if (ssb_extif_available(&bus->extif))
++		return ssb_gpio_extif_init(bus);
++	else
++		SSB_WARN_ON(1);
++
++	return -1;
++}
 --- a/drivers/ssb/driver_mipscore.c
 +++ b/drivers/ssb/driver_mipscore.c
 @@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
@@ -337,7 +777,7 @@
  		mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
  	else
  		mcore->nr_serial_ports = 0;
-@@ -190,16 +190,32 @@ static void ssb_mips_flash_detect(struct
+@@ -190,16 +190,33 @@ static void ssb_mips_flash_detect(struct
  {
  	struct ssb_bus *bus = mcore->dev->bus;
  
@@ -358,7 +798,8 @@
 +	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
 +	case SSB_CHIPCO_FLASHT_STSER:
 +	case SSB_CHIPCO_FLASHT_ATSER:
-+		pr_err("Serial flash not supported\n");
++		pr_debug("Found serial flash\n");
++		ssb_sflash_init(&bus->chipco);
 +		break;
 +	case SSB_CHIPCO_FLASHT_PARA:
 +		pr_debug("Found parallel flash\n");
@@ -378,7 +819,7 @@
  	}
  }
  
-@@ -208,9 +224,12 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+@@ -208,9 +225,12 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
  	struct ssb_bus *bus = mcore->dev->bus;
  	u32 pll_type, n, m, rate = 0;
  
@@ -393,7 +834,7 @@
  		ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
  	} else
  		return 0;
-@@ -246,9 +265,9 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -246,9 +266,9 @@ void ssb_mipscore_init(struct ssb_mipsco
  		hz = 100000000;
  	ns = 1000000000 / hz;
  
@@ -534,7 +975,22 @@
  		ssb_bus_may_powerdown(bus);
  
  		err = ssb_devices_register(bus);
-@@ -1094,6 +1086,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -812,7 +804,14 @@ static int __devinit ssb_bus_register(st
+ 	if (err)
+ 		goto err_pcmcia_exit;
+ 	ssb_chipcommon_init(&bus->chipco);
++	ssb_extif_init(&bus->extif);
+ 	ssb_mipscore_init(&bus->mipscore);
++	err = ssb_gpio_init(bus);
++	if (err == -ENOTSUPP)
++		ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++	else if (err)
++		ssb_dprintk(KERN_ERR PFX
++			   "Error registering GPIO driver: %i\n", err);
+ 	err = ssb_fetch_invariants(bus, get_invariants);
+ 	if (err) {
+ 		ssb_bus_may_powerdown(bus);
+@@ -1094,6 +1093,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
  	u32 plltype;
  	u32 clkctl_n, clkctl_m;
  
@@ -544,7 +1000,7 @@
  	if (ssb_extif_available(&bus->extif))
  		ssb_extif_get_clockcontrol(&bus->extif, &plltype,
  					   &clkctl_n, &clkctl_m);
-@@ -1131,8 +1126,7 @@ static u32 ssb_tmslow_reject_bitmask(str
+@@ -1131,8 +1133,7 @@ static u32 ssb_tmslow_reject_bitmask(str
  	case SSB_IDLOW_SSBREV_27:     /* same here */
  		return SSB_TMSLOW_REJECT;	/* this is a guess */
  	default:
@@ -890,7 +1346,7 @@
  
  
  #define PFX	"ssb: "
-@@ -207,4 +208,38 @@ static inline void b43_pci_ssb_bridge_ex
+@@ -207,4 +208,66 @@ static inline void b43_pci_ssb_bridge_ex
  }
  #endif /* CONFIG_SSB_B43_PCI_BRIDGE */
  
@@ -903,6 +1359,17 @@
 +					     u32 ticks);
 +extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
 +
++/* driver_chipcommon_sflash.c */
++#ifdef CONFIG_SSB_SFLASH
++int ssb_sflash_init(struct ssb_chipcommon *cc);
++#else
++static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
++{
++	pr_err("Serial flash not supported\n");
++	return 0;
++}
++#endif /* CONFIG_SSB_SFLASH */
++
 +#ifdef CONFIG_SSB_DRIVER_EXTIF
 +extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
 +extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
@@ -928,18 +1395,38 @@
 +}
 +#endif /* CONFIG_SSB_EMBEDDED */
 +
++#ifdef CONFIG_SSB_DRIVER_EXTIF
++extern void ssb_extif_init(struct ssb_extif *extif);
++#else
++static inline void ssb_extif_init(struct ssb_extif *extif)
++{
++}
++#endif
++
++#ifdef CONFIG_SSB_DRIVER_GPIO
++extern int ssb_gpio_init(struct ssb_bus *bus);
++#else /* CONFIG_SSB_DRIVER_GPIO */
++static inline int ssb_gpio_init(struct ssb_bus *bus)
++{
++	return -ENOTSUPP;
++}
++#endif /* CONFIG_SSB_DRIVER_GPIO */
++
  #endif /* LINUX_SSB_PRIVATE_H_ */
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
-@@ -8,6 +8,7 @@
+@@ -6,8 +6,10 @@
+ #include <linux/types.h>
+ #include <linux/spinlock.h>
  #include <linux/pci.h>
++#include <linux/gpio.h>
  #include <linux/mod_devicetable.h>
  #include <linux/dma-mapping.h>
 +#include <linux/platform_device.h>
  
  #include <linux/ssb/ssb_regs.h>
  
-@@ -16,6 +17,12 @@ struct pcmcia_device;
+@@ -16,6 +18,12 @@ struct pcmcia_device;
  struct ssb_bus;
  struct ssb_driver;
  
@@ -952,7 +1439,7 @@
  struct ssb_sprom {
  	u8 revision;
  	u8 il0mac[6];		/* MAC address for 802.11b/g */
-@@ -26,9 +33,12 @@ struct ssb_sprom {
+@@ -26,9 +34,12 @@ struct ssb_sprom {
  	u8 et0mdcport;		/* MDIO for enet0 */
  	u8 et1mdcport;		/* MDIO for enet1 */
  	u16 board_rev;		/* Board revision number from SPROM. */
@@ -967,7 +1454,7 @@
  	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
  	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
  	u16 pa0b0;
-@@ -47,10 +57,10 @@ struct ssb_sprom {
+@@ -47,10 +58,10 @@ struct ssb_sprom {
  	u8 gpio1;		/* GPIO pin 1 */
  	u8 gpio2;		/* GPIO pin 2 */
  	u8 gpio3;		/* GPIO pin 3 */
@@ -982,7 +1469,7 @@
  	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
  	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
  	u8 tri2g;		/* 2.4GHz TX isolation */
-@@ -61,8 +71,8 @@ struct ssb_sprom {
+@@ -61,8 +72,8 @@ struct ssb_sprom {
  	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
  	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
  	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
@@ -993,7 +1480,7 @@
  	u8 rssisav2g;		/* 2GHz RSSI params */
  	u8 rssismc2g;
  	u8 rssismf2g;
-@@ -82,16 +92,13 @@ struct ssb_sprom {
+@@ -82,16 +93,13 @@ struct ssb_sprom {
  	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
  	/* TODO store board flags in a single u64 */
  
@@ -1013,7 +1500,7 @@
  	} antenna_gain;
  
  	struct {
-@@ -103,14 +110,85 @@ struct ssb_sprom {
+@@ -103,14 +111,85 @@ struct ssb_sprom {
  		} ghz5;
  	} fem;
  
@@ -1101,7 +1588,7 @@
  };
  
  
-@@ -166,6 +244,7 @@ struct ssb_bus_ops {
+@@ -166,6 +245,7 @@ struct ssb_bus_ops {
  #define SSB_DEV_MINI_MACPHY	0x823
  #define SSB_DEV_ARM_1176	0x824
  #define SSB_DEV_ARM_7TDMI	0x825
@@ -1109,14 +1596,18 @@
  
  /* Vendor-ID values */
  #define SSB_VENDOR_BROADCOM	0x4243
-@@ -354,6 +433,7 @@ struct ssb_bus {
+@@ -354,7 +434,11 @@ struct ssb_bus {
  #ifdef CONFIG_SSB_EMBEDDED
  	/* Lock for GPIO register access. */
  	spinlock_t gpio_lock;
 +	struct platform_device *watchdog;
  #endif /* EMBEDDED */
++#ifdef CONFIG_SSB_DRIVER_GPIO
++	struct gpio_chip gpio;
++#endif /* DRIVER_GPIO */
  
  	/* Internal-only stuff follows. Do not touch. */
+ 	struct list_head list;
 --- a/include/linux/ssb/ssb_driver_chipcommon.h
 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
 @@ -504,7 +504,9 @@
@@ -1130,16 +1621,18 @@
  
  /* Status register bits for ST flashes */
  #define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
-@@ -589,6 +591,8 @@ struct ssb_chipcommon {
+@@ -588,7 +590,10 @@ struct ssb_chipcommon {
+ 	u32 status;
  	/* Fast Powerup Delay constant */
  	u16 fast_pwrup_delay;
++	spinlock_t gpio_lock;
  	struct ssb_chipcommon_pmu pmu;
 +	u32 ticks_per_ms;
 +	u32 max_timer_ms;
  };
  
  static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -628,8 +632,7 @@ enum ssb_clkmode {
+@@ -628,8 +633,7 @@ enum ssb_clkmode {
  extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
  				     enum ssb_clkmode mode);
  
@@ -1149,9 +1642,18 @@
  
  void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
  
+@@ -642,6 +646,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
+ u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
+ u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
++u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value);
++u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value);
+ 
+ #ifdef CONFIG_SSB_SERIAL
+ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 --- a/include/linux/ssb/ssb_driver_extif.h
 +++ b/include/linux/ssb/ssb_driver_extif.h
-@@ -152,6 +152,9 @@
+@@ -152,12 +152,16 @@
  /* watchdog */
  #define SSB_EXTIF_WATCHDOG_CLK		48000000	/* Hz */
  
@@ -1161,7 +1663,14 @@
  
  
  #ifdef CONFIG_SSB_DRIVER_EXTIF
-@@ -171,8 +174,7 @@ extern void ssb_extif_get_clockcontrol(s
+ 
+ struct ssb_extif {
+ 	struct ssb_device *dev;
++	spinlock_t gpio_lock;
+ };
+ 
+ static inline bool ssb_extif_available(struct ssb_extif *extif)
+@@ -171,8 +175,7 @@ extern void ssb_extif_get_clockcontrol(s
  extern void ssb_extif_timing_init(struct ssb_extif *extif,
  				  unsigned long ns);
  
@@ -1171,7 +1680,7 @@
  
  /* Extif GPIO pin access */
  u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
-@@ -205,10 +207,52 @@ void ssb_extif_get_clockcontrol(struct s
+@@ -205,10 +208,52 @@ void ssb_extif_get_clockcontrol(struct s
  }
  
  static inline
@@ -1414,3 +1923,25 @@
  /* Values for boardflags_lo read from SPROM */
  #define SSB_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */
  #define SSB_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */
+--- /dev/null
++++ b/include/linux/bcm47xx_wdt.h
+@@ -0,0 +1,19 @@
++#ifndef LINUX_BCM47XX_WDT_H_
++#define LINUX_BCM47XX_WDT_H_
++
++#include <linux/types.h>
++
++
++struct bcm47xx_wdt {
++	u32 (*timer_set)(struct bcm47xx_wdt *, u32);
++	u32 (*timer_set_ms)(struct bcm47xx_wdt *, u32);
++	u32 max_timer_ms;
++
++	void *driver_data;
++};
++
++static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt)
++{
++	return wdt->driver_data;
++}
++#endif /* LINUX_BCM47XX_WDT_H_ */
diff --git a/target/linux/generic/patches-3.3/021-ssb_bcma_watchdog_header.patch b/target/linux/generic/patches-3.3/021-ssb_bcma_watchdog_header.patch
deleted file mode 100644
index 18feeab0b..000000000
--- a/target/linux/generic/patches-3.3/021-ssb_bcma_watchdog_header.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- /dev/null
-+++ b/include/linux/bcm47xx_wdt.h
-@@ -0,0 +1,19 @@
-+#ifndef LINUX_BCM47XX_WDT_H_
-+#define LINUX_BCM47XX_WDT_H_
-+
-+#include <linux/types.h>
-+
-+
-+struct bcm47xx_wdt {
-+	u32 (*timer_set)(struct bcm47xx_wdt *, u32);
-+	u32 (*timer_set_ms)(struct bcm47xx_wdt *, u32);
-+	u32 max_timer_ms;
-+
-+	void *driver_data;
-+};
-+
-+static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt)
-+{
-+	return wdt->driver_data;
-+}
-+#endif /* LINUX_BCM47XX_WDT_H_ */
diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch
index 282da4224..a00bec30e 100644
--- a/target/linux/generic/patches-3.3/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.3/025-bcma_backport.patch
@@ -1,33 +1,3 @@
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -43,8 +43,8 @@ static void early_nvram_init(void)
- #ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
--		base = mcore_ssb->flash_window;
--		lim = mcore_ssb->flash_window_size;
-+		base = mcore_ssb->pflash.window;
-+		lim = mcore_ssb->pflash.window_size;
- 		break;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ b/arch/mips/bcm47xx/wgt634u.c
-@@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
- 					    SSB_CHIPCO_IRQ_GPIO);
- 		}
- 
--		wgt634u_flash_data.width = mcore->flash_buswidth;
--		wgt634u_flash_resource.start = mcore->flash_window;
--		wgt634u_flash_resource.end = mcore->flash_window
--					   + mcore->flash_window_size
-+		wgt634u_flash_data.width = mcore->pflash.buswidth;
-+		wgt634u_flash_resource.start = mcore->pflash.window;
-+		wgt634u_flash_resource.end = mcore->pflash.window
-+					   + mcore->pflash.window_size
- 					   - 1;
- 		return platform_add_devices(wgt634u_devices,
- 					    ARRAY_SIZE(wgt634u_devices));
 --- a/drivers/bcma/Kconfig
 +++ b/drivers/bcma/Kconfig
 @@ -29,7 +29,7 @@ config BCMA_HOST_PCI
@@ -39,7 +9,7 @@
  	help
  	  PCI core hostmode operation (external PCI bus).
  
-@@ -46,6 +46,25 @@ config BCMA_DRIVER_MIPS
+@@ -46,6 +46,33 @@ config BCMA_DRIVER_MIPS
  
  	  If unsure, say N
  
@@ -62,12 +32,20 @@
 +
 +	  If unsure, say N
 +
++config BCMA_DRIVER_GPIO
++	bool "BCMA GPIO driver"
++	depends on BCMA && GPIOLIB
++	help
++	  Driver to provide access to the GPIO pins of the bcma bus.
++
++	  If unsure, say N
++
  config BCMA_DEBUG
  	bool "BCMA debugging"
  	depends on BCMA
 --- a/drivers/bcma/Makefile
 +++ b/drivers/bcma/Makefile
-@@ -1,8 +1,11 @@
+@@ -1,8 +1,12 @@
  bcma-y					+= main.o scan.o core.o sprom.o
  bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
 +bcma-$(CONFIG_BCMA_SFLASH)		+= driver_chipcommon_sflash.o
@@ -76,6 +54,7 @@
  bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
  bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
 +bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)	+= driver_gmac_cmn.o
++bcma-$(CONFIG_BCMA_DRIVER_GPIO)		+= driver_gpio.o
  bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
  bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
  obj-$(CONFIG_BCMA)			+= bcma.o
@@ -102,7 +81,16 @@
  void bcma_bus_unregister(struct bcma_bus *bus);
  int __init bcma_bus_early_register(struct bcma_bus *bus,
  				   struct bcma_device *core_cc,
-@@ -39,8 +48,32 @@ void bcma_chipco_serial_init(struct bcma
+@@ -22,6 +31,8 @@ int __init bcma_bus_early_register(struc
+ int bcma_bus_suspend(struct bcma_bus *bus);
+ int bcma_bus_resume(struct bcma_bus *bus);
+ #endif
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++					u8 unit);
+ 
+ /* scan.c */
+ int bcma_bus_scan(struct bcma_bus *bus);
+@@ -39,8 +50,32 @@ void bcma_chipco_serial_init(struct bcma
  #endif /* CONFIG_BCMA_DRIVER_MIPS */
  
  /* driver_chipcommon_pmu.c */
@@ -137,7 +125,7 @@
  
  #ifdef CONFIG_BCMA_HOST_PCI
  /* host_pci.c */
-@@ -48,8 +81,14 @@ extern int __init bcma_host_pci_init(voi
+@@ -48,8 +83,24 @@ extern int __init bcma_host_pci_init(voi
  extern void __exit bcma_host_pci_exit(void);
  #endif /* CONFIG_BCMA_HOST_PCI */
  
@@ -152,6 +140,16 @@
 +void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
  #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
  
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++/* driver_gpio.c */
++int bcma_gpio_init(struct bcma_drv_cc *cc);
++#else
++static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++	return -ENOTSUPP;
++}
++#endif /* CONFIG_BCMA_DRIVER_GPIO */
++
  #endif
 --- a/drivers/bcma/core.c
 +++ b/drivers/bcma/core.c
@@ -226,7 +224,7 @@
  #include <linux/bcma/bcma.h>
  
  static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,12 +25,93 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,20 +25,119 @@ static inline u32 bcma_cc_write32_masked
  	return value;
  }
  
@@ -323,8 +321,11 @@
 +	if (cc->early_setup_done)
  		return;
  
++	spin_lock_init(&cc->gpio_lock);
++
  	if (cc->core->id.rev >= 11)
-@@ -36,6 +120,22 @@ void bcma_core_chipcommon_init(struct bc
+ 		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ 	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
  	if (cc->core->id.rev >= 35)
  		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
  
@@ -347,7 +348,7 @@
  	if (cc->core->id.rev >= 20) {
  		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
  		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -44,7 +144,7 @@ void bcma_core_chipcommon_init(struct bc
+@@ -44,7 +146,7 @@ void bcma_core_chipcommon_init(struct bc
  	if (cc->capabilities & BCMA_CC_CAP_PMU)
  		bcma_pmu_init(cc);
  	if (cc->capabilities & BCMA_CC_CAP_PCTL)
@@ -356,7 +357,7 @@
  
  	if (cc->core->id.rev >= 16) {
  		if (cc->core->bus->sprom.leddc_on_time &&
-@@ -56,15 +156,33 @@ void bcma_core_chipcommon_init(struct bc
+@@ -56,15 +158,33 @@ void bcma_core_chipcommon_init(struct bc
  			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
  			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
  	}
@@ -393,7 +394,110 @@
  }
  
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -118,8 +236,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -84,28 +204,97 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+ 
+ u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++	unsigned long flags;
++	u32 res;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++	unsigned long flags;
++	u32 res;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ 
++/*
++ * If the bit is set to 0, chipcommon controlls this GPIO,
++ * if the bit is set to 1, it is used by some part of the chip and not our code.
++ */
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++	unsigned long flags;
++	u32 res;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+ 
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++	unsigned long flags;
++	u32 res;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+-	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++	unsigned long flags;
++	u32 res;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
++}
++
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res;
++
++	if (cc->core->id.rev < 20)
++		return 0;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLUP, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
++}
++
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res;
++
++	if (cc->core->id.rev < 20)
++		return 0;
++
++	spin_lock_irqsave(&cc->gpio_lock, flags);
++	res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLDOWN, mask, value);
++	spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++	return res;
+ }
+ 
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+@@ -118,8 +307,7 @@ void bcma_chipco_serial_init(struct bcma
  	struct bcma_serial_port *ports = cc->serial_ports;
  
  	if (ccrev >= 11 && ccrev != 15) {
@@ -403,7 +507,7 @@
  		if (ccrev >= 21) {
  			/* Turn off UART clock before switching clocksource. */
  			bcma_cc_write32(cc, BCMA_CC_CORECTL,
-@@ -137,8 +254,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -137,8 +325,7 @@ void bcma_chipco_serial_init(struct bcma
  				       | BCMA_CC_CORECTL_UARTCLKEN);
  		}
  	} else {
@@ -472,7 +576,22 @@
   *
   * Licensed under the GNU/GPL. See COPYING for details.
   */
-@@ -54,38 +55,19 @@ void bcma_chipco_regctl_maskset(struct b
+@@ -12,12 +13,13 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+ 
+-static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
++u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+ {
+ 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+ 	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+ 	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
+ 
+ void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
+ {
+@@ -54,38 +56,19 @@ void bcma_chipco_regctl_maskset(struct b
  }
  EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
  
@@ -514,7 +633,7 @@
  	}
  
  	/* Set the resource masks. */
-@@ -93,22 +75,12 @@ static void bcma_pmu_resources_init(stru
+@@ -93,22 +76,12 @@ static void bcma_pmu_resources_init(stru
  		bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
  	if (max_msk)
  		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
@@ -542,7 +661,7 @@
  }
  
  /* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
-@@ -122,51 +94,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -122,51 +95,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
  		val |= BCMA_CHIPCTL_4331_EXTPA_EN;
  		if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
  			val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
@@ -629,7 +748,7 @@
  	if (cc->pmu.rev == 1)
  		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
  			      ~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -174,37 +164,31 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -174,37 +165,31 @@ void bcma_pmu_init(struct bcma_drv_cc *c
  		bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
  			     BCMA_CC_PMU_CTL_NOILPONW);
  
@@ -679,7 +798,7 @@
  	}
  	return BCMA_CC_PMU_ALP_CLOCK;
  }
-@@ -212,7 +196,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+@@ -212,7 +197,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
  /* Find the output of the "m" pll divider given pll controls that start with
   * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
   */
@@ -688,7 +807,7 @@
  {
  	u32 tmp, div, ndiv, p1, p2, fc;
  	struct bcma_bus *bus = cc->core->bus;
-@@ -221,7 +205,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -221,7 +206,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
  
  	BUG_ON(!m || m > 4);
  
@@ -698,7 +817,7 @@
  		/* Detect failure in clock setting */
  		tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
  		if (tmp & 0x40000)
-@@ -240,60 +225,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -240,60 +226,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
  	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
  
  	/* Do calculation in Mhz */
@@ -820,7 +939,7 @@
  			pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
  			break;
  		default:
-@@ -301,10 +321,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -301,10 +322,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
  			break;
  		}
  
@@ -1054,7 +1173,7 @@
 +	{ "M25P40", 0x12, 0x10000, 8, },
 +
 +	{ "M25P16", 0x14, 0x10000, 32, },
-+	{ "M25P32", 0x14, 0x10000, 64, },
++	{ "M25P32", 0x15, 0x10000, 64, },
 +	{ "M25P64", 0x16, 0x10000, 128, },
 +	{ "M25FL128", 0x17, 0x10000, 256, },
 +	{ 0 },
@@ -1199,6 +1318,107 @@
 +{
 +	mutex_init(&gc->phy_mutex);
 +}
+--- /dev/null
++++ b/drivers/bcma/driver_gpio.c
+@@ -0,0 +1,98 @@
++/*
++ * Broadcom specific AMBA
++ * GPIO driver
++ *
++ * Copyright 2011, Broadcom Corporation
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/gpio.h>
++#include <linux/export.h>
++#include <linux/bcma/bcma.h>
++
++#include "bcma_private.h"
++
++static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
++{
++	return container_of(chip, struct bcma_drv_cc, gpio);
++}
++
++static int bcma_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++	return !!bcma_chipco_gpio_in(cc, 1 << gpio);
++}
++
++static void bcma_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
++				int value)
++{
++	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++	bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int bcma_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++{
++	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++	bcma_chipco_gpio_outen(cc, 1 << gpio, 0);
++	return 0;
++}
++
++static int bcma_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
++				      int value)
++{
++	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++	bcma_chipco_gpio_outen(cc, 1 << gpio, 1 << gpio);
++	bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++	return 0;
++}
++
++static int bcma_gpio_request(struct gpio_chip *chip, unsigned gpio)
++{
++	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++	bcma_chipco_gpio_control(cc, 1 << gpio, 0);
++	/* clear pulldown */
++	bcma_chipco_gpio_pulldown(cc, 1 << gpio, 0);
++	/* Set pullup */
++	bcma_chipco_gpio_pullup(cc, 1 << gpio, 1 << gpio);
++
++	return 0;
++}
++
++static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio)
++{
++	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++	/* clear pullup */
++	bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
++}
++
++int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++	struct gpio_chip *chip = &cc->gpio;
++
++	chip->label		= "bcma_gpio";
++	chip->owner		= THIS_MODULE;
++	chip->request		= bcma_gpio_request;
++	chip->free		= bcma_gpio_free;
++	chip->get		= bcma_gpio_get_value;
++	chip->set		= bcma_gpio_set_value;
++	chip->direction_input	= bcma_gpio_direction_input;
++	chip->direction_output	= bcma_gpio_direction_output;
++	chip->ngpio		= 16;
++	/* There is just one SoC in one device and its GPIO addresses should be
++	 * deterministic to address them more easily. The other buses could get
++	 * a random base number. */
++	if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++		chip->base		= 0;
++	else
++		chip->base		= -1;
++
++	return gpiochip_add(chip);
++}
 --- a/drivers/bcma/driver_mips.c
 +++ b/drivers/bcma/driver_mips.c
 @@ -22,15 +22,15 @@
@@ -1221,36 +1441,112 @@
  	       dev->bus->chipinfo.pkg == 11 &&
  	       dev->id.id == BCMA_CORE_USB20_HOST;
  }
-@@ -115,7 +115,7 @@ static void bcma_core_mips_set_irq(struc
+@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct
+ 		return dev->core_index;
+ 	flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+ 
+-	return flag & 0x1F;
++	if (flag)
++		return flag & 0x1F;
++	else
++		return 0x3f;
+ }
+ 
+ /* Get the MIPS IRQ assignment for a specified device.
+  * If unassigned, 0 is returned.
++ * If disabled, 5 is returned.
++ * If not supported, 6 is returned.
+  */
+ unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b
+ 	unsigned int irq;
+ 
+ 	irqflag = bcma_core_mips_irqflag(dev);
++	if (irqflag == 0x3f)
++		return 6;
+ 
+-	for (irq = 1; irq <= 4; irq++)
++	for (irq = 0; irq <= 4; irq++)
+ 		if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
+ 		    (1 << irqflag))
+ 			return irq;
+ 
+-	return 0;
++	return 5;
+ }
+ EXPORT_SYMBOL(bcma_core_mips_irq);
+ 
+@@ -114,8 +121,8 @@ static void bcma_core_mips_set_irq(struc
+ 		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
  			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
  			    ~(1 << irqflag));
- 	else
+-	else
 -		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
++	else if (oldirq != 5)
 +		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
  
  	/* assign the new one */
  	if (irq == 0) {
-@@ -131,7 +131,7 @@ static void bcma_core_mips_set_irq(struc
+@@ -123,17 +130,17 @@ static void bcma_core_mips_set_irq(struc
+ 			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
+ 			    (1 << irqflag));
+ 	} else {
+-		u32 oldirqflag = bcma_read32(mdev,
+-					     BCMA_MIPS_MIPS74K_INTMASK(irq));
+-		if (oldirqflag) {
++		u32 irqinitmask = bcma_read32(mdev,
++					      BCMA_MIPS_MIPS74K_INTMASK(irq));
++		if (irqinitmask) {
+ 			struct bcma_device *core;
+ 
  			/* backplane irq line is in use, find out who uses
  			 * it and set user to irq 0
  			 */
 -			list_for_each_entry_reverse(core, &bus->cores, list) {
 +			list_for_each_entry(core, &bus->cores, list) {
  				if ((1 << bcma_core_mips_irqflag(core)) ==
- 				    oldirqflag) {
+-				    oldirqflag) {
++				    irqinitmask) {
  					bcma_core_mips_set_irq(core, 0);
-@@ -143,8 +143,8 @@ static void bcma_core_mips_set_irq(struc
+ 					break;
+ 				}
+@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc
  			     1 << irqflag);
  	}
  
 -	pr_info("set_irq: core 0x%04x, irq %d => %d\n",
 -		dev->id.id, oldirq + 2, irq + 2);
-+	bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n",
-+		  dev->id.id, oldirq + 2, irq + 2);
++	bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n",
++		   dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2);
++}
++
++static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq,
++					u16 coreid, u8 unit)
++{
++	struct bcma_device *core;
++
++	core = bcma_find_core_unit(bus, coreid, unit);
++	if (!core) {
++		bcma_warn(bus,
++			  "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n",
++			  coreid, unit);
++		return;
++	}
++
++	bcma_core_mips_set_irq(core, irq);
  }
  
  static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
-@@ -161,7 +161,7 @@ static void bcma_core_mips_dump_irq(stru
+ {
+ 	int i;
+ 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+-	printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
++	printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+ 	for (i = 0; i <= 6; i++)
+ 		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
+ 	printk("\n");
+@@ -161,7 +184,7 @@ static void bcma_core_mips_dump_irq(stru
  {
  	struct bcma_device *core;
  
@@ -1259,7 +1555,7 @@
  		bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
  	}
  }
-@@ -171,9 +171,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
  	struct bcma_bus *bus = mcore->core->bus;
  
  	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
@@ -1271,7 +1567,7 @@
  	return 0;
  }
  EXPORT_SYMBOL(bcma_cpu_clock);
-@@ -181,26 +181,50 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+@@ -181,76 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock);
  static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
  {
  	struct bcma_bus *bus = mcore->core->bus;
@@ -1306,7 +1602,7 @@
  	default:
 -		pr_err("flash not supported.\n");
 +		bcma_err(bus, "Flash type not supported\n");
- 	}
++	}
 +
 +	if (cc->core->id.rev == 38 ||
 +	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
@@ -1314,9 +1610,9 @@
 +			bcma_debug(bus, "Found NAND flash\n");
 +			bcma_nflash_init(cc);
 +		}
-+	}
-+}
-+
+ 	}
+ }
+ 
 +void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
 +{
 +	struct bcma_bus *bus = mcore->core->bus;
@@ -1328,10 +1624,11 @@
 +	bcma_core_mips_flash_detect(mcore);
 +
 +	mcore->early_setup_done = true;
- }
- 
++}
++
  void bcma_core_mips_init(struct bcma_drv_mips *mcore)
-@@ -209,13 +233,17 @@ void bcma_core_mips_init(struct bcma_drv
+ {
+ 	struct bcma_bus *bus;
  	struct bcma_device *core;
  	bus = mcore->core->bus;
  
@@ -1339,26 +1636,84 @@
 +	if (mcore->setup_done)
 +		return;
 +
-+	bcma_info(bus, "Initializing MIPS core...\n");
-+
-+	bcma_core_mips_early_init(mcore);
++	bcma_debug(bus, "Initializing MIPS core...\n");
  
 -	if (!mcore->setup_done)
 -		mcore->assigned_irqs = 1;
-+	mcore->assigned_irqs = 1;
++	bcma_core_mips_early_init(mcore);
  
- 	/* Assign IRQs to all cores on the bus */
+-	/* Assign IRQs to all cores on the bus */
 -	list_for_each_entry_reverse(core, &bus->cores, list) {
-+	list_for_each_entry(core, &bus->cores, list) {
- 		int mips_irq;
- 		if (core->irq)
- 			continue;
-@@ -244,13 +272,8 @@ void bcma_core_mips_init(struct bcma_drv
- 			break;
+-		int mips_irq;
+-		if (core->irq)
+-			continue;
+-
+-		mips_irq = bcma_core_mips_irq(core);
+-		if (mips_irq > 4)
+-			core->irq = 0;
+-		else
+-			core->irq = mips_irq + 2;
+-		if (core->irq > 5)
+-			continue;
+-		switch (core->id.id) {
+-		case BCMA_CORE_PCI:
+-		case BCMA_CORE_PCIE:
+-		case BCMA_CORE_ETHERNET:
+-		case BCMA_CORE_ETHERNET_GBIT:
+-		case BCMA_CORE_MAC_GBIT:
+-		case BCMA_CORE_80211:
+-		case BCMA_CORE_USB20_HOST:
+-			/* These devices get their own IRQ line if available,
+-			 * the rest goes on IRQ0
+-			 */
+-			if (mcore->assigned_irqs <= 4)
+-				bcma_core_mips_set_irq(core,
+-						       mcore->assigned_irqs++);
+-			break;
++	switch (bus->chipinfo.id) {
++	case BCMA_CHIP_ID_BCM4716:
++	case BCMA_CHIP_ID_BCM4748:
++		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++		bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++		break;
++	case BCMA_CHIP_ID_BCM5356:
++	case BCMA_CHIP_ID_BCM47162:
++	case BCMA_CHIP_ID_BCM53572:
++		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++		break;
++	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4749:
++		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++		break;
++	case BCMA_CHIP_ID_BCM4706:
++		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0);
++		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT,
++					    0);
++		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1);
++		bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON,
++					    0);
++		break;
++	default:
++		list_for_each_entry(core, &bus->cores, list) {
++			core->irq = bcma_core_mips_irq(core) + 2;
  		}
++		bcma_err(bus,
++			 "Unknown device (0x%x) found, can not configure IRQs\n",
++			 bus->chipinfo.id);
  	}
 -	pr_info("IRQ reconfiguration done\n");
-+	bcma_info(bus, "IRQ reconfiguration done\n");
++	bcma_debug(bus, "IRQ reconfiguration done\n");
  	bcma_core_mips_dump_irq(bus);
  
 -	if (mcore->setup_done)
@@ -2512,8 +2867,8 @@
  }
 +EXPORT_SYMBOL_GPL(bcma_find_core);
 +
-+static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
-+					       u8 unit)
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++					u8 unit)
 +{
 +	struct bcma_device *core;
 +
@@ -2546,7 +2901,7 @@
  
  		switch (bus->hosttype) {
  		case BCMA_HOSTTYPE_PCI:
-@@ -111,41 +140,85 @@ static int bcma_register_cores(struct bc
+@@ -111,41 +140,90 @@ static int bcma_register_cores(struct bc
  
  		err = device_register(&core->dev);
  		if (err) {
@@ -2576,6 +2931,11 @@
 +			bcma_err(bus, "Error registering NAND flash\n");
 +	}
 +#endif
++	err = bcma_gpio_init(&bus->drv_cc);
++	if (err == -ENOTSUPP)
++		bcma_debug(bus, "GPIO driver not activated\n");
++	else if (err)
++		bcma_err(bus, "Error registering GPIO driver: %i\n", err);
 +
 +	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
 +		err = bcma_chipco_watchdog_register(&bus->drv_cc);
@@ -2639,7 +2999,7 @@
  	if (core) {
  		bus->drv_cc.core = core;
  		bcma_core_chipcommon_init(&bus->drv_cc);
-@@ -159,30 +232,47 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -159,30 +237,47 @@ int bcma_bus_register(struct bcma_bus *b
  	}
  
  	/* Init PCIE core */
@@ -2697,7 +3057,7 @@
  }
  
  int __init bcma_bus_early_register(struct bcma_bus *bus,
-@@ -196,14 +286,14 @@ int __init bcma_bus_early_register(struc
+@@ -196,14 +291,14 @@ int __init bcma_bus_early_register(struc
  	bcma_init_bus(bus);
  
  	match.manuf = BCMA_MANUF_BCM;
@@ -2714,7 +3074,7 @@
  		return -1;
  	}
  
-@@ -215,25 +305,25 @@ int __init bcma_bus_early_register(struc
+@@ -215,25 +310,25 @@ int __init bcma_bus_early_register(struc
  	/* Scan for mips core */
  	err = bcma_bus_scan_early(bus, &match, core_mips);
  	if (err) {
@@ -2747,7 +3107,7 @@
  
  	return 0;
  }
-@@ -259,8 +349,7 @@ int bcma_bus_resume(struct bcma_bus *bus
+@@ -259,8 +354,7 @@ int bcma_bus_resume(struct bcma_bus *bus
  	struct bcma_device *core;
  
  	/* Init CC core */
@@ -3760,18 +4120,27 @@
  extern bool bcma_core_is_enabled(struct bcma_device *core);
  extern void bcma_core_disable(struct bcma_device *core, u32 flags);
  extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+@@ -289,6 +350,7 @@ extern void bcma_core_set_clockmode(stru
+ 				    enum bcma_clkmode clkmode);
+ extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
+ 			      bool on);
++extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset);
+ #define BCMA_DMA_TRANSLATION_MASK	0xC0000000
+ #define  BCMA_DMA_TRANSLATION_NONE	0x00000000
+ #define  BCMA_DMA_TRANSLATION_DMA32_CMT	0x40000000 /* Client Mode Translation for 32-bit DMA */
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -1,6 +1,8 @@
+@@ -1,6 +1,9 @@
  #ifndef LINUX_BCMA_DRIVER_CC_H_
  #define LINUX_BCMA_DRIVER_CC_H_
  
 +#include <linux/platform_device.h>
++#include <linux/gpio.h>
 +
  /** ChipCommon core registers. **/
  #define BCMA_CC_ID			0x0000
  #define  BCMA_CC_ID_ID			0x0000FFFF
-@@ -24,7 +26,7 @@
+@@ -24,7 +27,7 @@
  #define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
  #define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
  #define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
@@ -3780,7 +4149,7 @@
  #define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
  #define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
  #define   BCMA_PLLTYPE_NONE		0x00000000
-@@ -45,6 +47,7 @@
+@@ -45,6 +48,7 @@
  #define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
  #define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
  #define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
@@ -3788,7 +4157,7 @@
  #define BCMA_CC_CORECTL			0x0008
  #define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
  #define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
-@@ -56,6 +59,9 @@
+@@ -56,6 +60,9 @@
  #define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
  #define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
  #define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
@@ -3798,7 +4167,7 @@
  #define BCMA_CC_OTPC			0x0014		/* OTP control */
  #define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
  #define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
-@@ -72,6 +78,8 @@
+@@ -72,6 +79,8 @@
  #define	 BCMA_CC_OTPP_READ		0x40000000
  #define	 BCMA_CC_OTPP_START		0x80000000
  #define	 BCMA_CC_OTPP_BUSY		0x80000000
@@ -3807,7 +4176,7 @@
  #define BCMA_CC_IRQSTAT			0x0020
  #define BCMA_CC_IRQMASK			0x0024
  #define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
-@@ -79,6 +87,22 @@
+@@ -79,6 +88,22 @@
  #define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
  #define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
  #define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
@@ -3830,7 +4199,7 @@
  #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
  #define  BCMA_CC_JCMD_START		0x80000000
  #define  BCMA_CC_JCMD_BUSY		0x80000000
-@@ -108,10 +132,58 @@
+@@ -108,10 +133,58 @@
  #define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
  #define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
  #define BCMA_CC_FLASHCTL		0x0040
@@ -3889,7 +4258,7 @@
  #define BCMA_CC_BCAST_ADDR		0x0050
  #define BCMA_CC_BCAST_DATA		0x0054
  #define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
-@@ -181,6 +253,45 @@
+@@ -181,6 +254,45 @@
  #define BCMA_CC_FLASH_CFG		0x0128
  #define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
  #define BCMA_CC_FLASH_WAITCNT		0x012C
@@ -3935,7 +4304,7 @@
  /* 0x1E0 is defined as shared BCMA_CLKCTLST */
  #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
  #define BCMA_CC_UART0_DATA		0x0300
-@@ -240,7 +351,60 @@
+@@ -240,7 +352,60 @@
  #define BCMA_CC_PLLCTL_ADDR		0x0660
  #define BCMA_CC_PLLCTL_DATA		0x0664
  #define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
@@ -3997,7 +4366,7 @@
  
  /* Divider allocation in 4716/47162/5356 */
  #define BCMA_CC_PMU5_MAINPLL_CPU	1
-@@ -256,6 +420,15 @@
+@@ -256,6 +421,15 @@
  
  /* 4706 PMU */
  #define BCMA_CC_PMU4706_MAINPLL_PLL0	0
@@ -4013,7 +4382,7 @@
  
  /* ALP clock on pre-PMU chips */
  #define BCMA_CC_PMU_ALP_CLOCK		20000000
-@@ -284,6 +457,19 @@
+@@ -284,6 +458,19 @@
  #define BCMA_CC_PPL_PCHI_OFF		5
  #define BCMA_CC_PPL_PCHI_MASK		0x0000003f
  
@@ -4033,7 +4402,7 @@
  /* BCM4331 ChipControl numbers. */
  #define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
  #define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
-@@ -297,9 +483,25 @@
+@@ -297,9 +484,25 @@
  #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
  #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
  #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
@@ -4059,7 +4428,7 @@
  /* Data for the PMU, if available.
   * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
   */
-@@ -310,11 +512,35 @@ struct bcma_chipcommon_pmu {
+@@ -310,11 +513,35 @@ struct bcma_chipcommon_pmu {
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
  struct bcma_pflash {
@@ -4095,7 +4464,7 @@
  struct bcma_serial_port {
  	void *regs;
  	unsigned long clockspeed;
-@@ -330,15 +556,24 @@ struct bcma_drv_cc {
+@@ -330,15 +557,30 @@ struct bcma_drv_cc {
  	u32 capabilities;
  	u32 capabilities_ext;
  	u8 setup_done:1;
@@ -4117,10 +4486,16 @@
  #endif /* CONFIG_BCMA_DRIVER_MIPS */
 +	u32 ticks_per_ms;
 +	struct platform_device *watchdog;
++
++	/* Lock for GPIO register access. */
++	spinlock_t gpio_lock;
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++	struct gpio_chip gpio;
++#endif
  };
  
  /* Register access */
-@@ -355,14 +590,14 @@ struct bcma_drv_cc {
+@@ -355,14 +597,14 @@ struct bcma_drv_cc {
  	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
  
  extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
@@ -4137,7 +4512,12 @@
  
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
  
-@@ -378,6 +613,7 @@ u32 bcma_chipco_gpio_polarity(struct bcm
+@@ -375,9 +617,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
  
  /* PMU support */
  extern void bcma_pmu_init(struct bcma_drv_cc *cc);
@@ -4145,7 +4525,7 @@
  
  extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
  				  u32 value);
-@@ -387,5 +623,6 @@ extern void bcma_chipco_chipctl_maskset(
+@@ -387,5 +632,6 @@ extern void bcma_chipco_chipctl_maskset(
  					u32 offset, u32 mask, u32 set);
  extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
  				       u32 offset, u32 mask, u32 set);
@@ -4257,12 +4637,12 @@
 +#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
 --- a/include/linux/bcma/bcma_driver_mips.h
 +++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -35,13 +35,16 @@ struct bcma_device;
+@@ -35,13 +35,15 @@ struct bcma_device;
  struct bcma_drv_mips {
  	struct bcma_device *core;
  	u8 setup_done:1;
+-	unsigned int assigned_irqs;
 +	u8 early_setup_done:1;
- 	unsigned int assigned_irqs;
  };
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS