kernel: add missing bcma defines and header file for bcrmfmac

Fixes build failure when having kmod-mmc and brcmfmac selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36468 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 124 insertions, 0 deletions

diff --git a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h
new file mode 100644
index 000000000..1ade657d5
--- /dev/null
+++ b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2013 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_BRCMFMAC_PLATFORM_H
+#define _LINUX_BRCMFMAC_PLATFORM_H
+
+/*
+ * Platform specific driver functions and data. Through the platform specific
+ * device data functions can be provided to help the brcmfmac driver to
+ * operate with the device in combination with the used platform.
+ *
+ * Use the platform data in the following (similar) way:
+ *
+ *
+#include <brcmfmac_platform.h>
+
+
+static void brcmfmac_power_on(void)
+{
+}
+
+static void brcmfmac_power_off(void)
+{
+}
+
+static void brcmfmac_reset(void)
+{
+}
+
+static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
+	.power_on		= brcmfmac_power_on,
+	.power_off		= brcmfmac_power_off,
+	.reset			= brcmfmac_reset
+};
+
+static struct platform_device brcmfmac_device = {
+	.name			= BRCMFMAC_SDIO_PDATA_NAME,
+	.id			= PLATFORM_DEVID_NONE,
+	.dev.platform_data	= &brcmfmac_sdio_pdata
+};
+
+void __init brcmfmac_init_pdata(void)
+{
+	brcmfmac_sdio_pdata.oob_irq_supported = true;
+	brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
+	brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
+					    IORESOURCE_IRQ_HIGHLEVEL;
+	platform_device_register(&brcmfmac_device);
+}
+ *
+ *
+ * Note: the brcmfmac can be loaded as module or be statically built-in into
+ * the kernel. If built-in then do note that it uses module_init (and
+ * module_exit) routines which equal device_initcall. So if you intend to
+ * create a module with the platform specific data for the brcmfmac and have
+ * it built-in to the kernel then use a higher initcall then device_initcall
+ * (see init.h). If this is not done then brcmfmac will load without problems
+ * but will not pickup the platform data.
+ *
+ * When the driver does not "detect" platform driver data then it will continue
+ * without reporting anything and just assume there is no data needed. Which is
+ * probably true for most platforms.
+ *
+ * Explanation of the platform_data fields:
+ *
+ * drive_strength: is the preferred drive_strength to be used for the SDIO
+ * pins. If 0 then a default value will be used. This is the target drive
+ * strength, the exact drive strength which will be used depends on the
+ * capabilities of the device.
+ *
+ * oob_irq_supported: does the board have support for OOB interrupts. SDIO
+ * in-band interrupts are relatively slow and for having less overhead on
+ * interrupt processing an out of band interrupt can be used. If the HW
+ * supports this then enable this by setting this field to true and configure
+ * the oob related fields.
+ *
+ * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
+ * used for registering the irq using request_irq function.
+ *
+ * power_on: This function is called by the brcmfmac when the module gets
+ * loaded. This can be particularly useful for low power devices. The platform
+ * spcific routine may for example decide to power up the complete device.
+ * If there is no use-case for this function then provide NULL.
+ *
+ * power_off: This function is called by the brcmfmac when the module gets
+ * unloaded. At this point the device can be powered down or otherwise be reset.
+ * So if an actual power_off is not supported but reset is then reset the device
+ * when this function gets called. This can be particularly useful for low power
+ * devices. If there is no use-case for this function (either power-down or
+ * reset) then provide NULL.
+ *
+ * reset: This function can get called if the device communication broke down.
+ * This functionality is particularly useful in case of SDIO type devices. It is
+ * possible to reset a dongle via sdio data interface, but it requires that
+ * this is fully functional. This function is chip/module specific and this
+ * function should return only after the complete reset has completed.
+ */
+
+#define BRCMFMAC_SDIO_PDATA_NAME	"brcmfmac_sdio"
+
+struct brcmfmac_sdio_platform_data {
+	unsigned int drive_strength;
+	bool oob_irq_supported;
+	unsigned int oob_irq_nr;
+	unsigned long oob_irq_flags;
+	void (*power_on)(void);
+	void (*power_off)(void);
+	void (*reset)(void);
+};
+
+#endif /* _LINUX_BRCMFMAC_PLATFORM_H */