rename target/linux/generic-2.6 to generic

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21952 3c298f89-4303-0410-b956-a3cf2f4a3e73

9 files changed, 636 insertions, 0 deletions

diff --git a/target/linux/generic/files/include/linux/glamo-engine.h b/target/linux/generic/files/include/linux/glamo-engine.h
new file mode 100644
index 000000000..516d45fa6
--- /dev/null
+++ b/target/linux/generic/files/include/linux/glamo-engine.h
@@ -0,0 +1,27 @@
+#ifndef __GLAMO_ENGINE_H
+#define __GLAMO_ENGINE_H
+
+enum glamo_engine {
+	GLAMO_ENGINE_CAPTURE = 0,
+	GLAMO_ENGINE_ISP = 1,
+	GLAMO_ENGINE_JPEG = 2,
+	GLAMO_ENGINE_MPEG_ENC = 3,
+	GLAMO_ENGINE_MPEG_DEC = 4,
+	GLAMO_ENGINE_LCD = 5,
+	GLAMO_ENGINE_CMDQ = 6,
+	GLAMO_ENGINE_2D = 7,
+	GLAMO_ENGINE_3D = 8,
+	GLAMO_ENGINE_MMC = 9,
+	GLAMO_ENGINE_MICROP0 = 10,
+	GLAMO_ENGINE_RISC = 11,
+	GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
+	GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
+#if 0
+	GLAMO_ENGINE_H264_DEC = 14,
+	GLAMO_ENGINE_RISC1 = 15,
+	GLAMO_ENGINE_SPI = 16,
+#endif
+	__NUM_GLAMO_ENGINES
+};
+
+#endif
diff --git a/target/linux/generic/files/include/linux/glamofb.h b/target/linux/generic/files/include/linux/glamofb.h
new file mode 100644
index 000000000..5f9fab5a4
--- /dev/null
+++ b/target/linux/generic/files/include/linux/glamofb.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/fb.h>
+
+#ifdef __KERNEL__
+
+struct glamo_core;
+struct glamofb_handle;
+
+struct glamo_fb_platform_data {
+    int width, height;
+
+    int num_modes;
+    struct fb_videomode *modes;
+
+    struct glamo_core *core;
+};
+
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#ifdef CONFIG_MFD_GLAMO
+void glamo_lcm_reset(struct platform_device *pdev, int level);
+#else
+#define glamo_lcm_reset(...) do {} while (0)
+#endif
+
+#endif
+
+#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
+#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
+#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
+
+#endif
diff --git a/target/linux/generic/files/include/linux/gpio_buttons.h b/target/linux/generic/files/include/linux/gpio_buttons.h
new file mode 100644
index 000000000..f85b993ed
--- /dev/null
+++ b/target/linux/generic/files/include/linux/gpio_buttons.h
@@ -0,0 +1,33 @@
+/*
+ *  Definitions for the GPIO buttons interface driver
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was based on: /include/linux/gpio_keys.h
+ *	The original gpio_keys.h seems not to have a license.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _GPIO_BUTTONS_H_
+#define _GPIO_BUTTONS_H_
+
+struct gpio_button {
+	int	gpio;		/* GPIO line number */
+	int	active_low;
+	char	*desc;		/* button description */
+	int	type;		/* input event type (EV_KEY, EV_SW) */
+	int	code;		/* input event code (KEY_*, SW_*) */
+	int	threshold;	/* count threshold */
+};
+
+struct gpio_buttons_platform_data {
+	struct gpio_button *buttons;
+	int	nbuttons;		/* number of buttons */
+	int	poll_interval;		/* polling interval */
+};
+
+#endif /* _GPIO_BUTTONS_H_ */
diff --git a/target/linux/generic/files/include/linux/gpio_dev.h b/target/linux/generic/files/include/linux/gpio_dev.h
new file mode 100644
index 000000000..a2a4b51c7
--- /dev/null
+++ b/target/linux/generic/files/include/linux/gpio_dev.h
@@ -0,0 +1,42 @@
+#ifndef _GPIO_DEV_H__
+#define _GPIO_DEV_H__
+
+/*********************************************************************
+ *
+ * This Linux kernel header is expanded from the original driver
+ * (gpio_dev) by John Crispin. It provides an ioctl based interface to
+ * GPIO pins via the /dev/gpio char device and gpiolib within the kernel.
+ * The third argument to each ioctl is the GPIO pin number.
+ *
+ * This driver has been tested with lk 2.6.31 and works. The original
+ * driver fails quietly with this version. The protocol is now a bit
+ * different: the ioctl(fd, GPIO_REQUEST, <pin>) should be called
+ * after the open("/dev/gpio", O_RDWR) to determine if the <pin> is
+ * already in use. If the ioctl is successful (i.e. returns 0 for not
+ * in use) then the <pin> is claimed by this driver and
+ * ioctl(fd, GPIO_FREE, <pin>) should be called prior to close(fd) .
+ * 
+ * See <kernel_source>/Documentation/gpio.txt
+ * Note that kernel designers prefer the use of the sysfs gpio interface.
+ * This char driver is easier to use from code and faster.
+ ********************************************************************/
+
+/* This header can be included in both the user and kernel spaces */
+/* The _IO macro is defined in sys/ioctl.h */
+
+#define IOC_GPIODEV_MAGIC  'B'
+
+#define GPIO_GET        _IO(IOC_GPIODEV_MAGIC, 10)
+#define GPIO_SET        _IO(IOC_GPIODEV_MAGIC, 11)
+#define GPIO_CLEAR      _IO(IOC_GPIODEV_MAGIC, 12)
+#define GPIO_DIR_IN     _IO(IOC_GPIODEV_MAGIC, 13)
+#define GPIO_DIR_OUT    _IO(IOC_GPIODEV_MAGIC, 14)
+        /* Sets the direction out and clears the <pin> (low) */
+
+#define GPIO_DIR_HIGH   _IO(IOC_GPIODEV_MAGIC, 15)
+        /* Sets the direction out and sets the <pin> (high) */
+#define GPIO_REQUEST    _IO(IOC_GPIODEV_MAGIC, 16)
+#define GPIO_FREE       _IO(IOC_GPIODEV_MAGIC, 17)
+#define GPIO_CAN_SLEEP  _IO(IOC_GPIODEV_MAGIC, 18)
+
+#endif
diff --git a/target/linux/generic/files/include/linux/myloader.h b/target/linux/generic/files/include/linux/myloader.h
new file mode 100644
index 000000000..dcba6eb62
--- /dev/null
+++ b/target/linux/generic/files/include/linux/myloader.h
@@ -0,0 +1,120 @@
+/*
+ *  Compex's MyLoader specific definitions
+ *
+ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_SYS_PARAMS	0x20021107
+#define MYLO_MAGIC_PARTITIONS	0x20021103
+#define MYLO_MAGIC_BOARD_PARAMS	0x20021103
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX		0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G	0x0078
+#define DEVID_COMPEX_NP28G	0x044C
+#define DEVID_COMPEX_NP28GHS	0x044E
+#define DEVID_COMPEX_WP54Gv1C	0x0514
+#define DEVID_COMPEX_WP54G	0x0515
+#define DEVID_COMPEX_WP54AG	0x0546
+#define DEVID_COMPEX_WPP54AG	0x0550
+#define DEVID_COMPEX_WPP54G	0x0555
+
+/* Devices based on the Atheros AR2317 */
+#define DEVID_COMPEX_NP25G	0x05E6
+#define DEVID_COMPEX_WPE53G	0x05DC
+
+/* Devices based on the Atheros AR71xx */
+#define DEVID_COMPEX_WP543	0x0640
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18	0x047E
+#define DEVID_COMPEX_NP18A	0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M	0x03E8
+#define DEVID_COMPEX_NP26G16M	0x03E9
+
+struct mylo_partition {
+	uint16_t	flags;	/* partition flags */
+	uint16_t	type;	/* type of the partition */
+	uint32_t	addr;	/* relative address of the partition from the
+				   flash start */
+	uint32_t	size;	/* size of the partition in bytes */
+	uint32_t	param;	/* if this is the active partition, the
+				   MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
+					* MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
+					* before decompression */
+#define PARTITION_FLAG_LZMA	0x0100 /* partition data compressed by LZMA */
+#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE	0
+#define PARTITION_TYPE_USED	1
+
+#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
+					   partition table */
+
+struct mylo_partition_table {
+	uint32_t	magic;		/* must be MYLO_MAGIC_PARTITIONS */
+	uint32_t	res0;		/* unknown/unused */
+	uint32_t	res1;		/* unknown/unused */
+	uint32_t 	res2;		/* unknown/unused */
+	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+	uint32_t	len;		/* length of the partition data */
+	uint32_t	crc;		/* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+	uint32_t	magic;		/* must be MYLO_MAGIC_SYS_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	mylo_ver;
+	uint16_t	vid;		/* Vendor ID */
+	uint16_t	did;		/* Device ID */
+	uint16_t	svid;		/* Sub Vendor ID */
+	uint16_t	sdid;		/* Sub Device ID */
+	uint32_t	rev;		/* device revision */
+	uint32_t	fwhi;
+	uint32_t	fwlo;
+	uint32_t	tftp_addr;
+	uint32_t	prog_start;
+	uint32_t	flash_size;	/* size of boot FLASH in bytes */
+	uint32_t	dram_size;	/* size of onboard RAM in bytes */
+};
+
+struct mylo_eth_addr {
+	uint8_t	mac[6];
+	uint8_t	csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
+					   in the board parameters */
+
+struct mylo_board_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	res2;
+	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+#endif /* _MYLOADER_H_*/
diff --git a/target/linux/generic/files/include/linux/pwm/pwm.h b/target/linux/generic/files/include/linux/pwm/pwm.h
new file mode 100644
index 000000000..e01cca903
--- /dev/null
+++ b/target/linux/generic/files/include/linux/pwm/pwm.h
@@ -0,0 +1,165 @@
+/*
+ * include/linux/pwm.h
+ *
+ * Copyright (C) 2008 Bill Gatliff < bgat@billgatliff.com>
+ *
+ * This program is free software; you may redistribute and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#ifndef __LINUX_PWM_H
+#define __LINUX_PWM_H
+
+enum {
+	PWM_CONFIG_DUTY_TICKS = BIT(0),
+	PWM_CONFIG_PERIOD_TICKS = BIT(1),
+	PWM_CONFIG_POLARITY = BIT(2),
+	PWM_CONFIG_START = BIT(3),
+	PWM_CONFIG_STOP = BIT(4),
+
+	PWM_CONFIG_HANDLER = BIT(5),
+
+	PWM_CONFIG_DUTY_NS = BIT(6),
+	PWM_CONFIG_DUTY_PERCENT = BIT(7),
+	PWM_CONFIG_PERIOD_NS = BIT(8),
+};
+
+struct pwm_channel;
+struct work_struct;
+
+typedef int (*pwm_handler_t)(struct pwm_channel *p, void *data);
+typedef void (*pwm_callback_t)(struct pwm_channel *p);
+
+struct pwm_channel_config {
+	int config_mask;
+	unsigned long duty_ticks;
+	unsigned long period_ticks;
+	int polarity;
+
+	pwm_handler_t handler;
+
+	unsigned long duty_ns;
+	unsigned long period_ns;
+	int duty_percent;
+};
+
+struct pwm_device {
+	struct list_head list;
+	spinlock_t list_lock;
+	struct device *dev;
+	struct module *owner;
+	struct pwm_channel *channels;
+
+	const char *bus_id;
+	int nchan;
+
+	int	(*request)	(struct pwm_channel *p);
+	void	(*free)		(struct pwm_channel *p);
+	int	(*config)	(struct pwm_channel *p,
+				 struct pwm_channel_config *c);
+	int	(*config_nosleep)(struct pwm_channel *p,
+				  struct pwm_channel_config *c);
+	int	(*synchronize)	(struct pwm_channel *p,
+				 struct pwm_channel *to_p);
+	int	(*unsynchronize)(struct pwm_channel *p,
+				 struct pwm_channel *from_p);
+	int	(*set_callback)	(struct pwm_channel *p,
+				 pwm_callback_t callback);
+};
+
+int pwm_register(struct pwm_device *pwm);
+int pwm_unregister(struct pwm_device *pwm);
+
+enum {
+	FLAG_REQUESTED = 0,
+	FLAG_STOP = 1,
+};
+
+struct pwm_channel {
+	struct list_head list;
+	struct pwm_device *pwm;
+	const char *requester;
+	pid_t pid;
+	int chan;
+	unsigned long flags;
+	unsigned long tick_hz;
+
+	spinlock_t lock;
+	struct completion complete;
+
+	pwm_callback_t callback;
+
+	struct work_struct handler_work;
+	pwm_handler_t handler;
+	void *handler_data;
+
+	int active_high;
+	unsigned long period_ticks;
+	unsigned long duty_ticks;
+};
+
+struct gpio_pwm_platform_data {
+	int gpio;
+};
+
+struct pwm_channel *
+pwm_request(const char *bus_id, int chan,
+	    const char *requester);
+
+void pwm_free(struct pwm_channel *pwm);
+
+int pwm_config_nosleep(struct pwm_channel *pwm,
+		       struct pwm_channel_config *c);
+
+int pwm_config(struct pwm_channel *pwm,
+	       struct pwm_channel_config *c);
+
+unsigned long pwm_ns_to_ticks(struct pwm_channel *pwm,
+			      unsigned long nsecs);
+
+unsigned long pwm_ticks_to_ns(struct pwm_channel *pwm,
+			      unsigned long ticks);
+
+int pwm_set_period_ns(struct pwm_channel *pwm,
+		      unsigned long period_ns);
+
+unsigned long int pwm_get_period_ns(struct pwm_channel *pwm);
+
+int pwm_set_duty_ns(struct pwm_channel *pwm,
+		    unsigned long duty_ns);
+
+int pwm_set_duty_percent(struct pwm_channel *pwm,
+			 int percent);
+
+unsigned long pwm_get_duty_ns(struct pwm_channel *pwm);
+
+int pwm_set_polarity(struct pwm_channel *pwm,
+		     int active_high);
+
+int pwm_start(struct pwm_channel *pwm);
+
+int pwm_stop(struct pwm_channel *pwm);
+
+int pwm_set_handler(struct pwm_channel *pwm,
+		    pwm_handler_t handler,
+		    void *data);
+
+int pwm_synchronize(struct pwm_channel *p,
+		    struct pwm_channel *to_p);
+
+
+int pwm_unsynchronize(struct pwm_channel *p,
+		      struct pwm_channel *from_p);
+
+
+#endif /* __LINUX_PWM_H */
diff --git a/target/linux/generic/files/include/linux/rtl8366rb.h b/target/linux/generic/files/include/linux/rtl8366rb.h
new file mode 100644
index 000000000..053e2ec04
--- /dev/null
+++ b/target/linux/generic/files/include/linux/rtl8366rb.h
@@ -0,0 +1,21 @@
+/*
+ * Platform data definition for the Realtek RTL8366S ethernet switch driver
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366RB_H
+#define _RTL8366RB_H
+
+#define RTL8366RB_DRIVER_NAME	"rtl8366rb"
+
+struct rtl8366rb_platform_data {
+	unsigned	gpio_sda;
+	unsigned	gpio_sck;
+};
+
+#endif /*  _RTL8366RB_SMI_H */
diff --git a/target/linux/generic/files/include/linux/rtl8366s.h b/target/linux/generic/files/include/linux/rtl8366s.h
new file mode 100644
index 000000000..09173ec20
--- /dev/null
+++ b/target/linux/generic/files/include/linux/rtl8366s.h
@@ -0,0 +1,21 @@
+/*
+ * Platform data definition for the Realtek RTL8366S ethernet switch driver
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366S_H
+#define _RTL8366S_H
+
+#define RTL8366S_DRIVER_NAME	"rtl8366s"
+
+struct rtl8366s_platform_data {
+	unsigned	gpio_sda;
+	unsigned	gpio_sck;
+};
+
+#endif /*  _RTL8366_SMI_H */
diff --git a/target/linux/generic/files/include/linux/switch.h b/target/linux/generic/files/include/linux/switch.h
new file mode 100644
index 000000000..25aedb83b
--- /dev/null
+++ b/target/linux/generic/files/include/linux/switch.h
@@ -0,0 +1,172 @@
+/*
+ * switch.h: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_SWITCH_H
+#define __LINUX_SWITCH_H
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/genetlink.h>
+#ifndef __KERNEL__
+#include <netlink/netlink.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/ctrl.h>
+#else
+#include <net/genetlink.h>
+#endif
+
+/* main attributes */
+enum {
+	SWITCH_ATTR_UNSPEC,
+	/* global */
+	SWITCH_ATTR_TYPE,
+	/* device */
+	SWITCH_ATTR_ID,
+	SWITCH_ATTR_NAME,
+	SWITCH_ATTR_DEV_NAME,
+	SWITCH_ATTR_VLANS,
+	SWITCH_ATTR_PORTS,
+	SWITCH_ATTR_CPU_PORT,
+	/* attributes */
+	SWITCH_ATTR_OP_ID,
+	SWITCH_ATTR_OP_TYPE,
+	SWITCH_ATTR_OP_NAME,
+	SWITCH_ATTR_OP_PORT,
+	SWITCH_ATTR_OP_VLAN,
+	SWITCH_ATTR_OP_VALUE_INT,
+	SWITCH_ATTR_OP_VALUE_STR,
+	SWITCH_ATTR_OP_VALUE_PORTS,
+	SWITCH_ATTR_OP_DESCRIPTION,
+	/* port lists */
+	SWITCH_ATTR_PORT,
+	SWITCH_ATTR_MAX
+};
+
+/* commands */
+enum {
+	SWITCH_CMD_UNSPEC,
+	SWITCH_CMD_GET_SWITCH,
+	SWITCH_CMD_NEW_ATTR,
+	SWITCH_CMD_LIST_GLOBAL,
+	SWITCH_CMD_GET_GLOBAL,
+	SWITCH_CMD_SET_GLOBAL,
+	SWITCH_CMD_LIST_PORT,
+	SWITCH_CMD_GET_PORT,
+	SWITCH_CMD_SET_PORT,
+	SWITCH_CMD_LIST_VLAN,
+	SWITCH_CMD_GET_VLAN,
+	SWITCH_CMD_SET_VLAN
+};
+
+/* data types */
+enum switch_val_type {
+	SWITCH_TYPE_UNSPEC,
+	SWITCH_TYPE_INT,
+	SWITCH_TYPE_STRING,
+	SWITCH_TYPE_PORTS,
+	SWITCH_TYPE_NOVAL,
+};
+
+/* port nested attributes */
+enum {
+	SWITCH_PORT_UNSPEC,
+	SWITCH_PORT_ID,
+	SWITCH_PORT_FLAG_TAGGED,
+	SWITCH_PORT_ATTR_MAX
+};
+
+#define SWITCH_ATTR_DEFAULTS_OFFSET	0x1000
+
+#ifdef __KERNEL__
+
+struct switch_dev;
+struct switch_op;
+struct switch_val;
+struct switch_attr;
+struct switch_attrlist;
+
+int register_switch(struct switch_dev *dev, struct net_device *netdev);
+void unregister_switch(struct switch_dev *dev);
+
+struct switch_attrlist {
+	/* filled in by the driver */
+	int n_attr;
+	const struct switch_attr *attr;
+};
+
+
+struct switch_dev {
+	int id;
+	void *priv;
+	const char *name;
+
+	/* NB: either devname or netdev must be set */
+	const char *devname;
+	struct net_device *netdev;
+
+	int ports;
+	int vlans;
+	int cpu_port;
+	struct switch_attrlist attr_global, attr_port, attr_vlan;
+
+	spinlock_t lock;
+	struct switch_port *portbuf;
+	struct list_head dev_list;
+	unsigned long def_global, def_port, def_vlan;
+
+	int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+	int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+	int (*get_port_pvid)(struct switch_dev *dev, int port, int *val);
+	int (*set_port_pvid)(struct switch_dev *dev, int port, int val);
+	int (*apply_config)(struct switch_dev *dev);
+	int (*reset_switch)(struct switch_dev *dev);
+};
+
+struct switch_port {
+	u32 id;
+	u32 flags;
+};
+
+struct switch_val {
+	const struct switch_attr *attr;
+	int port_vlan;
+	int len;
+	union {
+		const char *s;
+		u32 i;
+		struct switch_port *ports;
+	} value;
+};
+
+struct switch_attr {
+	int disabled;
+	int type;
+	const char *name;
+	const char *description;
+
+	int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+	int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+
+	/* for driver internal use */
+	int id;
+	int ofs;
+	int max;
+};
+
+#endif
+
+#endif