generic: add b53 swconfig switch driver

Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35305 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 308 insertions, 0 deletions

diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
new file mode 100644
index 000000000..7b8f539be
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
@@ -0,0 +1,308 @@
+/*
+ * B53 register definitions
+ *
+ * Copyright (C) 2004 Broadcom Corporation
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_REGS_H
+#define __B53_REGS_H
+
+/* Management Port (SMP) Page offsets */
+#define B53_CTRL_PAGE			0x00 /* Control */
+#define B53_STAT_PAGE			0x01 /* Status */
+#define B53_MGMT_PAGE			0x02 /* Management Mode */
+#define B53_MIB_AC_PAGE			0x03 /* MIB Autocast */
+#define B53_ARLCTRL_PAGE		0x04 /* ARL Control */
+#define B53_ARLIO_PAGE			0x05 /* ARL Access */
+#define B53_FRAMEBUF_PAGE		0x06 /* Management frame access */
+#define B53_MEM_ACCESS_PAGE		0x08 /* Memory access */
+
+/* PHY Registers */
+#define B53_PORT_MII_PAGE(i)		(0x10 + i) /* Port i MII Registers */
+#define B53_IM_PORT_PAGE		0x18 /* Inverse MII Port (to EMAC) */
+#define B53_ALL_PORT_PAGE		0x19 /* All ports MII (broadcast) */
+
+/* MIB registers */
+#define B53_MIB_PAGE(i)			(0x20 + i)
+
+/* Quality of Service (QoS) Registers */
+#define B53_QOS_PAGE			0x30
+
+/* Port VLAN Page */
+#define B53_PVLAN_PAGE			0x31
+
+/* VLAN Registers */
+#define B53_VLAN_PAGE			0x34
+
+/* Jumbo Frame Registers */
+#define B53_JUMBO_PAGE			0x40
+
+/*************************************************************************
+ * Control Page registers
+ *************************************************************************/
+
+/* Port Control Register (8 bit) */
+#define B53_PORT_CTRL(i)		(0x00 + i)
+#define   PORT_CTRL_RX_DISABLE		BIT(0)
+#define   PORT_CTRL_TX_DISABLE		BIT(1)
+#define   PORT_CTRL_RX_BCST_EN		BIT(2) /* Broadcast RX (P8 only) */
+#define   PORT_CTRL_RX_MCST_EN		BIT(3) /* Multicast RX (P8 only) */
+#define   PORT_CTRL_RX_UCST_EN		BIT(4) /* Unicast RX (P8 only) */
+#define	  PORT_CTRL_STP_STATE_S		5
+#define   PORT_CTRL_STP_STATE_MASK	(0x3 << PORT_CTRL_STP_STATE_S)
+
+/* SMP Control Register (8 bit) */
+#define B53_SMP_CTRL			0x0a
+
+/* Switch Mode Control Register (8 bit) */
+#define B53_SWITCH_MODE			0x0b
+#define   SM_SW_FWD_MODE		BIT(0)	/* 1 = Managed Mode */
+#define   SM_SW_FWD_EN			BIT(1)	/* Forwarding Enable */
+
+/* IMP Port state override register (8 bit) */
+#define B53_PORT_OVERRIDE_CTRL		0x0e
+#define   PORT_OVERRIDE_LINK		BIT(0)
+#define   PORT_OVERRIDE_HALF_DUPLEX	BIT(1) /* 0 = Full Duplex */
+#define   PORT_OVERRIDE_SPEED_S		2
+#define   PORT_OVERRIDE_SPEED_10M	(0 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_SPEED_100M	(1 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_SPEED_1000M	(2 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_RV_MII_25	BIT(4) /* BCM5325 only */
+#define   PORT_OVERRIDE_RX_FLOW		BIT(4)
+#define   PORT_OVERRIDE_TX_FLOW		BIT(5)
+#define   PORT_OVERRIDE_EN		BIT(7) /* Use the register contents */
+
+/* Power-down mode control */
+#define B53_PD_MODE_CTRL_25		0x0f
+
+/* IP Multicast control (8 bit) */
+#define B53_IP_MULTICAST_CTRL		0x21
+#define  B53_IPMC_FWD_EN		BIT(1)
+#define  B53_UC_FWD_EN			BIT(6)
+#define  B53_MC_FWD_EN			BIT(7)
+
+/* (16 bit) */
+#define B53_UC_FLOOD_MASK		0x32
+#define B53_MC_FLOOD_MASK		0x34
+#define B53_IPMC_FLOOD_MASK		0x36
+
+/* Software reset register (8 bit) */
+#define B53_SOFTRESET			0x79
+
+/* Fast Aging Control register (8 bit) */
+#define B53_FAST_AGE_CTRL		0x88
+#define   FAST_AGE_STATIC		BIT(0)
+#define   FAST_AGE_DYNAMIC		BIT(1)
+#define   FAST_AGE_PORT			BIT(2)
+#define   FAST_AGE_VLAN			BIT(3)
+#define   FAST_AGE_STP			BIT(4)
+#define   FAST_AGE_MC			BIT(5)
+#define   FAST_AGE_DONE			BIT(7)
+
+/*************************************************************************
+ * Status Page registers
+ *************************************************************************/
+
+/* Link Status Summary Register (16bit) */
+#define B53_LINK_STAT			0x00
+
+/* Link Status Change Register (16 bit) */
+#define B53_LINK_STAT_CHANGE		0x02
+
+/* Port Speed Summary Register (16 bit for FE, 32 bit for GE) */
+#define B53_SPEED_STAT			0x04
+#define  SPEED_PORT_FE(reg, port)	(((reg) >> (port)) & 1)
+#define  SPEED_PORT_GE(reg, port)	(((reg) >> 2 * (port)) & 3)
+#define  SPEED_STAT_10M			0
+#define  SPEED_STAT_100M		1
+#define  SPEED_STAT_1000M		2
+
+/* Duplex Status Summary (16 bit) */
+#define B53_DUPLEX_STAT_FE		0x06
+#define B53_DUPLEX_STAT_GE		0x08
+#define B53_DUPLEX_STAT_63XX		0x0c
+
+/* Strap Value (48 bit) */
+#define B53_STRAP_VALUE			0x70
+#define   SV_GMII_CTRL_115		BIT(27)
+
+/*************************************************************************
+ * Management Mode Page Registers
+ *************************************************************************/
+
+/* Global Management Config Register (8 bit) */
+#define B53_GLOBAL_CONFIG		0x00
+#define   GC_RESET_MIB			0x01
+#define   GC_RX_BPDU_EN			0x02
+#define   GC_MIB_AC_HDR_EN		0x10
+#define   GC_MIB_AC_EN			0x20
+#define   GC_FRM_MGMT_PORT_M		0xC0
+#define   GC_FRM_MGMT_PORT_04		0x00
+#define   GC_FRM_MGMT_PORT_MII		0x80
+
+/* Device ID register (8 or 32 bit) */
+#define B53_DEVICE_ID			0x30
+
+/* Revision ID register (8 bit) */
+#define B53_REV_ID			0x40
+
+/*************************************************************************
+ * ARL Access Page Registers
+ *************************************************************************/
+
+/* VLAN Table Access Register (8 bit) */
+#define B53_VT_ACCESS			0x80
+#define B53_VT_ACCESS_9798		0x60 /* for BCM5397/BCM5398 */
+#define B53_VT_ACCESS_63XX		0x60 /* for BCM6328/62/68 */
+#define   VTA_CMD_WRITE			0
+#define   VTA_CMD_READ			1
+#define   VTA_CMD_CLEAR			2
+#define   VTA_START_CMD			BIT(7)
+
+/* VLAN Table Index Register (16 bit) */
+#define B53_VT_INDEX			0x81
+#define B53_VT_INDEX_9798		0x61
+#define B53_VT_INDEX_63XX		0x62
+
+/* VLAN Table Entry Register (32 bit) */
+#define B53_VT_ENTRY			0x83
+#define B53_VT_ENTRY_9798		0x63
+#define B53_VT_ENTRY_63XX		0x64
+#define   VTE_MEMBERS			0x1ff
+#define   VTE_UNTAG_S			9
+#define   VTE_UNTAG			(0x1ff << 9)
+
+/*************************************************************************
+ * Port VLAN Registers
+ *************************************************************************/
+
+/* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */
+#define B53_PVLAN_PORT_MASK(i)		((i) * 2)
+
+/*************************************************************************
+ * 802.1Q Page Registers
+ *************************************************************************/
+
+/* Global QoS Control (8 bit) */
+#define B53_QOS_GLOBAL_CTL		0x00
+
+/* Enable 802.1Q for individual Ports (16 bit) */
+#define B53_802_1P_EN			0x04
+
+/*************************************************************************
+ * VLAN Page Registers
+ *************************************************************************/
+
+/* VLAN Control 0 (8 bit) */
+#define B53_VLAN_CTRL0			0x00
+#define   VC0_8021PF_CTRL_MASK		0x3
+#define   VC0_8021PF_CTRL_NONE		0x0
+#define   VC0_8021PF_CTRL_CHANGE_PRI	0x1
+#define   VC0_8021PF_CTRL_CHANGE_VID	0x2
+#define   VC0_8021PF_CTRL_CHANGE_BOTH	0x3
+#define   VC0_8021QF_CTRL_MASK		0xc
+#define   VC0_8021QF_CTRL_CHANGE_PRI	0x1
+#define   VC0_8021QF_CTRL_CHANGE_VID	0x2
+#define   VC0_8021QF_CTRL_CHANGE_BOTH	0x3
+#define   VC0_RESERVED_1		BIT(1)
+#define   VC0_DROP_VID_MISS		BIT(4)
+#define   VC0_VID_HASH_VID		BIT(5)
+#define   VC0_VID_CHK_EN		BIT(6)	/* Use VID,DA or VID,SA */
+#define   VC0_VLAN_EN			BIT(7)	/* 802.1Q VLAN Enabled */
+
+/* VLAN Control 1 (8 bit) */
+#define B53_VLAN_CTRL1			0x01
+#define   VC1_RX_MCST_TAG_EN		BIT(1)
+#define   VC1_RX_MCST_FWD_EN		BIT(2)
+#define   VC1_RX_MCST_UNTAG_EN		BIT(3)
+
+/* VLAN Control 2 (8 bit) */
+#define B53_VLAN_CTRL2			0x02
+
+/* VLAN Control 3 (8 bit when BCM5325, 16 bit else) */
+#define B53_VLAN_CTRL3			0x03
+#define B53_VLAN_CTRL3_63XX		0x04
+#define   VC3_MAXSIZE_1532		BIT(6) /* 5325 only */
+#define   VC3_HIGH_8BIT_EN		BIT(7) /* 5325 only */
+
+/* VLAN Control 4 (8 bit) */
+#define B53_VLAN_CTRL4			0x05
+#define B53_VLAN_CTRL4_25		0x04
+#define B53_VLAN_CTRL4_63XX		0x06
+#define   VC4_ING_VID_CHECK_S		6
+#define   VC4_ING_VID_CHECK_MASK	(0x3 << VC4_ING_VID_CHECK_S)
+#define   VC4_ING_VID_VIO_FWD		0 /* forward, but do not learn */
+#define   VC4_ING_VID_VIO_DROP		1 /* drop VID violations */
+#define   VC4_NO_ING_VID_CHK		2 /* do not check */
+#define   VC4_ING_VID_VIO_TO_IMP	3 /* redirect to MII port */
+
+/* VLAN Control 5 (8 bit) */
+#define B53_VLAN_CTRL5			0x06
+#define B53_VLAN_CTRL5_25		0x05
+#define B53_VLAN_CTRL5_63XX		0x07
+#define   VC5_VID_FFF_EN		BIT(2)
+#define   VC5_DROP_VTABLE_MISS		BIT(3)
+
+/* VLAN Control 6 (8 bit) */
+#define B53_VLAN_CTRL6			0x07
+#define B53_VLAN_CTRL6_63XX		0x08
+
+/* VLAN Table Access Register (16 bit) */
+#define B53_VLAN_TABLE_ACCESS_25	0x06	/* BCM5325E/5350 */
+#define B53_VLAN_TABLE_ACCESS_65	0x08	/* BCM5365 */
+#define   VTA_VID_LOW_MASK_25		0xf
+#define   VTA_VID_LOW_MASK_65		0xff
+#define   VTA_VID_HIGH_S_25		4
+#define   VTA_VID_HIGH_S_65		8
+#define   VTA_VID_HIGH_MASK_25		(0xff << VTA_VID_HIGH_S_25E)
+#define   VTA_VID_HIGH_MASK_65		(0xf << VTA_VID_HIGH_S_65)
+#define   VTA_RW_STATE			BIT(12)
+#define   VTA_RW_STATE_RD		0
+#define   VTA_RW_STATE_WR		BIT(12)
+#define   VTA_RW_OP_EN			BIT(13)
+
+/* VLAN Read/Write Registers for (16/32 bit) */
+#define B53_VLAN_WRITE_25		0x08
+#define B53_VLAN_WRITE_65		0x0a
+#define B53_VLAN_READ			0x0c
+#define   VA_MEMBER_MASK		0x3f
+#define   VA_UNTAG_S			6
+#define   VA_UNTAG_MASK			(0x3f << VA_UNTAG_S)
+#define   VA_VID_HIGH_S			12
+#define   VA_VID_HIGH_MASK		(0xffff << VA_VID_HIGH_S)
+#define   VA_VALID_25			BIT(20)
+#define   VA_VALID_25_R4		BIT(24)
+#define   VA_VALID_65			BIT(14)
+
+/* VLAN Port Default Tag (16 bit) */
+#define B53_VLAN_PORT_DEF_TAG(i)	(0x10 + 2 * (i))
+
+/*************************************************************************
+ * Jumbo Frame Page Registers
+ *************************************************************************/
+
+/* Jumbo Enable Port Mask (bit i == port i enabled) (32 bit) */
+#define B53_JUMBO_PORT_MASK		0x01
+#define B53_JUMBO_PORT_MASK_63XX	0x04
+#define   JPM_10_100_JUMBO_EN		BIT(24) /* GigE always enabled */
+
+/* Good Frame Max Size without 802.1Q TAG (16 bit) */
+#define B53_JUMBO_MAX_SIZE		0x05
+#define B53_JUMBO_MAX_SIZE_63XX		0x08
+#define   JMS_MIN_SIZE			1518
+#define   JMS_MAX_SIZE			9724
+
+#endif /* !__B53_REGS_H */