diff options
author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2008-11-17 09:19:27 +0000 |
---|---|---|
committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2008-11-17 09:19:27 +0000 |
commit | 939db4d35a047573d1b5e7751d9de32413f626b9 (patch) | |
tree | b9184cb100e8865cba96231280498e02684c11ee /target/linux/generic-2.6/files/include | |
parent | bfc031e319dbff431316068fce8a9165f3059ca0 (diff) |
[ar71xx] move MyLoader stuff into generic files, will be used on adm5120
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13254 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/generic-2.6/files/include')
-rw-r--r-- | target/linux/generic-2.6/files/include/linux/myloader.h | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/target/linux/generic-2.6/files/include/linux/myloader.h b/target/linux/generic-2.6/files/include/linux/myloader.h new file mode 100644 index 000000000..c16c41341 --- /dev/null +++ b/target/linux/generic-2.6/files/include/linux/myloader.h @@ -0,0 +1,116 @@ +/* + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_SYS_PARAMS 0x20021107 +#define MYLO_MAGIC_PARTITIONS 0x20021103 +#define MYLO_MAGIC_BOARD_PARAMS 0x20021103 + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the Atheros AR71xx */ +#define DEVID_COMPEX_WP543 0x0640 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_LZMA 0x0100 /* partition data compressed by LZMA */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* size of boot FLASH in bytes */ + uint32_t dram_size; /* size of onboard RAM in bytes */ +}; + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +#endif /* _MYLOADER_H_*/ |