diff options
| author | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-03-09 14:35:41 +0000 |
|---|---|---|
| committer | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-03-09 14:35:41 +0000 |
| commit | 455e74f06309d6e4fc035f80698492fda2696aab (patch) | |
| tree | 0d070cf1901b2c0db00fe54bab4b8ed35e5a35e5 /target/linux/generic-2.6/files/drivers/net/phy/ar8216.h | |
| parent | 95a4336b23283964e9b5f0ddd7fd9fe24e3f55af (diff) | |
Several small fixes for ar8216 driver (patch by Jonas Gorski)
* Create defines for some magic values/masks.
* Change vlan_id to u16, to allow VIDs > 255.
* Add a range check to set_pvid as it isn't a VID, but the index
in the vlan table.
* Set the max VID to 4094, since 4095 is a reserved value and
should not be used.
* In mangle_rx replace the provided VID with the VID of the table
entry of the port, not the index of the table.
* In hw_apply, remove a redundant emptyness check (was already
checked several lines above).
* In no vlan mode do not set the ingress mode to secure, as there
are no vlan table entries, but to use the port's destination
masks. Otherwise the switch won't forward anything.
* In read_status tell that the phy is up (taken from the rtl8306
driver).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20083 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/generic-2.6/files/drivers/net/phy/ar8216.h')
| -rw-r--r-- | target/linux/generic-2.6/files/drivers/net/phy/ar8216.h | 16 |
1 files changed, 14 insertions, 2 deletions
diff --git a/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h b/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h index 741dce917..c1b8fdbd8 100644 --- a/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h +++ b/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h @@ -24,6 +24,10 @@ #define AR8216_NUM_VLANS 16 #define AR8216_REG_CTRL 0x0000 +#define AR8216_CTRL_REVISION BITS(0, 8) +#define AR8216_CTRL_REVISION_S 0 +#define AR8216_CTRL_VERSION BITS(8, 8) +#define AR8216_CTRL_VERSION_S 8 #define AR8216_CTRL_RESET BIT(31) #define AR8216_REG_GLOBAL_CTRL 0x0030 @@ -73,8 +77,8 @@ #define AR8216_PORT_OFFSET(_i) (0x0100 * (_i + 1)) #define AR8216_REG_PORT_STATUS(_i) (AR8216_PORT_OFFSET(_i) + 0x0000) -#define AR8216_PORT_STATUS_SPEED BIT(0) -#define AR8216_PORT_STATUS_SPEED_ERR BIT(1) +#define AR8216_PORT_STATUS_SPEED BITS(0,2) +#define AR8216_PORT_STATUS_SPEED_S 0 #define AR8216_PORT_STATUS_TXMAC BIT(2) #define AR8216_PORT_STATUS_RXMAC BIT(3) #define AR8216_PORT_STATUS_TXFLOW BIT(4) @@ -126,6 +130,14 @@ #define AR8216_REG_PORT_RATE(_i) (AR8216_PORT_OFFSET(_i) + 0x000c) #define AR8216_REG_PORT_PRIO(_i) (AR8216_PORT_OFFSET(_i) + 0x0010) +/* port speed */ +enum { + AR8216_PORT_SPEED_10M = 0, + AR8216_PORT_SPEED_100M = 1, + AR8216_PORT_SPEED_1000M = 2, + AR8216_PORT_SPEED_ERR = 3, +}; + /* ingress 802.1q mode */ enum { AR8216_IN_PORT_ONLY = 0, |