summaryrefslogtreecommitdiffstats
path: root/target/linux/generic-2.4/patches
diff options
context:
space:
mode:
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2006-07-30 12:47:09 +0000
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2006-07-30 12:47:09 +0000
commit159377985a06e06657d113687835f82f46a2c437 (patch)
tree71e0b220e30678a99e035b65874cc84b23e14f72 /target/linux/generic-2.4/patches
parente8267e67439d3a022200be03ddedbb94b12b8980 (diff)
usb fixes and performance enhancements
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4325 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/generic-2.4/patches')
-rw-r--r--target/linux/generic-2.4/patches/228-more_usb_fixes.patch861
1 files changed, 861 insertions, 0 deletions
diff --git a/target/linux/generic-2.4/patches/228-more_usb_fixes.patch b/target/linux/generic-2.4/patches/228-more_usb_fixes.patch
new file mode 100644
index 000000000..40b24cac0
--- /dev/null
+++ b/target/linux/generic-2.4/patches/228-more_usb_fixes.patch
@@ -0,0 +1,861 @@
+diff -ur linux.old/drivers/scsi/hosts.c linux.dev/drivers/scsi/hosts.c
+--- linux.old/drivers/scsi/hosts.c 2003-06-13 16:51:36.000000000 +0200
++++ linux.dev/drivers/scsi/hosts.c 2006-07-30 12:34:30.000000000 +0200
+@@ -107,8 +107,21 @@
+ if (shn) shn->host_registered = 0;
+ /* else {} : This should not happen, we should panic here... */
+
++ /* If we are removing the last host registered, it is safe to reuse
++ * its host number (this avoids "holes" at boot time) (DB)
++ * It is also safe to reuse those of numbers directly below which have
++ * been released earlier (to avoid some holes in numbering).
++ */
++ if(sh->host_no == max_scsi_hosts - 1) {
++ while(--max_scsi_hosts >= next_scsi_host) {
++ shpnt = scsi_hostlist;
++ while(shpnt && shpnt->host_no != max_scsi_hosts - 1)
++ shpnt = shpnt->next;
++ if(shpnt)
++ break;
++ }
++ }
+ next_scsi_host--;
+-
+ kfree((char *) sh);
+ }
+
+diff -ur linux.old/drivers/usb/hcd.c linux.dev/drivers/usb/hcd.c
+--- linux.old/drivers/usb/hcd.c 2004-04-14 15:05:32.000000000 +0200
++++ linux.dev/drivers/usb/hcd.c 2006-07-30 11:49:06.000000000 +0200
+@@ -1105,7 +1105,8 @@
+ break;
+ case PIPE_BULK:
+ allowed |= USB_DISABLE_SPD | USB_QUEUE_BULK
+- | USB_ZERO_PACKET | URB_NO_INTERRUPT;
++ | USB_ZERO_PACKET | URB_NO_INTERRUPT
++ | URB_NO_TRANSFER_DMA_MAP;
+ break;
+ case PIPE_INTERRUPT:
+ allowed |= USB_DISABLE_SPD;
+@@ -1212,7 +1213,8 @@
+ urb->setup_packet,
+ sizeof (struct usb_ctrlrequest),
+ PCI_DMA_TODEVICE);
+- if (urb->transfer_buffer_length != 0)
++ if (urb->transfer_buffer_length != 0
++ && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ urb->transfer_dma = pci_map_single (
+ hcd->pdev,
+ urb->transfer_buffer,
+diff -ur linux.old/drivers/usb/host/ehci-hcd.c linux.dev/drivers/usb/host/ehci-hcd.c
+--- linux.old/drivers/usb/host/ehci-hcd.c 2006-07-30 11:31:57.000000000 +0200
++++ linux.dev/drivers/usb/host/ehci-hcd.c 2006-07-30 11:48:14.000000000 +0200
+@@ -399,6 +399,27 @@
+ ehci_mem_cleanup (ehci);
+ return retval;
+ }
++
++{
++ int misc_reg;
++ u32 vendor_id;
++
++ pci_read_config_dword (ehci->hcd.pdev, PCI_VENDOR_ID, &vendor_id);
++ if (vendor_id == 0x31041106) {
++ /* VIA 6212 */
++ printk(KERN_INFO "EHCI: Enabling VIA 6212 workarounds\n", misc_reg);
++ pci_read_config_byte(ehci->hcd.pdev, 0x49, &misc_reg);
++ misc_reg &= ~0x20;
++ pci_write_config_byte(ehci->hcd.pdev, 0x49, misc_reg);
++ pci_read_config_byte(ehci->hcd.pdev, 0x49, &misc_reg);
++
++ pci_read_config_byte(ehci->hcd.pdev, 0x4b, &misc_reg);
++ misc_reg |= 0x20;
++ pci_write_config_byte(ehci->hcd.pdev, 0x4b, misc_reg);
++ pci_read_config_byte(ehci->hcd.pdev, 0x4b, &misc_reg);
++ }
++}
++
+ writel (INTR_MASK, &ehci->regs->intr_enable);
+ writel (ehci->periodic_dma, &ehci->regs->frame_list);
+
+diff -ur linux.old/drivers/usb/host/ehci-q.c linux.dev/drivers/usb/host/ehci-q.c
+--- linux.old/drivers/usb/host/ehci-q.c 2006-07-30 11:31:57.000000000 +0200
++++ linux.dev/drivers/usb/host/ehci-q.c 2006-07-30 12:10:15.000000000 +0200
+@@ -791,6 +791,8 @@
+ writel (cmd, &ehci->regs->command);
+ ehci->hcd.state = USB_STATE_RUNNING;
+ /* posted write need not be known to HC yet ... */
++
++ timer_action (ehci, TIMER_IO_WATCHDOG);
+ }
+ }
+
+diff -ur linux.old/drivers/usb/host/usb-uhci.c linux.dev/drivers/usb/host/usb-uhci.c
+--- linux.old/drivers/usb/host/usb-uhci.c 2004-11-17 12:54:21.000000000 +0100
++++ linux.dev/drivers/usb/host/usb-uhci.c 2006-07-30 12:10:16.000000000 +0200
+@@ -2491,7 +2491,7 @@
+ ((urb_priv_t*)urb->hcpriv)->flags=0;
+ }
+
+- if ((urb->status != -ECONNABORTED) && (urb->status != ECONNRESET) &&
++ if ((urb->status != -ECONNABORTED) && (urb->status != -ECONNRESET) &&
+ (urb->status != -ENOENT)) {
+
+ urb->status = -EINPROGRESS;
+@@ -3034,6 +3034,21 @@
+
+ pci_set_master(dev);
+
++ {
++ u8 misc_reg;
++ u32 vendor_id;
++
++ pci_read_config_dword (dev, PCI_VENDOR_ID, &vendor_id);
++ if (vendor_id == 0x30381106) {
++ /* VIA 6212 */
++ printk(KERN_INFO "UHCI: Enabling VIA 6212 workarounds\n");
++ pci_read_config_byte(dev, 0x41, &misc_reg);
++ misc_reg &= ~0x10;
++ pci_write_config_byte(dev, 0x41, misc_reg);
++ pci_read_config_byte(dev, 0x41, &misc_reg);
++ }
++ }
++
+ /* Search for the IO base address.. */
+ for (i = 0; i < 6; i++) {
+
+diff -ur linux.old/drivers/usb/storage/transport.c linux.dev/drivers/usb/storage/transport.c
+--- linux.old/drivers/usb/storage/transport.c 2005-04-04 03:42:19.000000000 +0200
++++ linux.dev/drivers/usb/storage/transport.c 2006-07-30 12:22:56.000000000 +0200
+@@ -54,6 +54,22 @@
+ #include <linux/sched.h>
+ #include <linux/errno.h>
+ #include <linux/slab.h>
++#include <linux/pci.h>
++#include "../hcd.h"
++
++/* These definitions mirror those in pci.h, so they can be used
++ * interchangeably with their PCI_ counterparts */
++enum dma_data_direction {
++ DMA_BIDIRECTIONAL = 0,
++ DMA_TO_DEVICE = 1,
++ DMA_FROM_DEVICE = 2,
++ DMA_NONE = 3,
++};
++
++#define dma_map_sg(d,s,n,dir) pci_map_sg(d,s,n,dir)
++#define dma_unmap_sg(d,s,n,dir) pci_unmap_sg(d,s,n,dir)
++
++
+
+ /***********************************************************************
+ * Helper routines
+@@ -554,6 +570,543 @@
+ return US_BULK_TRANSFER_SHORT;
+ }
+
++/*-------------------------------------------------------------------*/
++/**
++ * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
++ * @dev: device to which the scatterlist will be mapped
++ * @pipe: endpoint defining the mapping direction
++ * @sg: the scatterlist to unmap
++ * @n_hw_ents: the positive return value from usb_buffer_map_sg
++ *
++ * Reverses the effect of usb_buffer_map_sg().
++ */
++static void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
++ struct scatterlist *sg, int n_hw_ents)
++{
++ struct usb_bus *bus;
++ struct usb_hcd *hcd;
++ struct pci_dev *pdev;
++
++ if (!dev
++ || !(bus = dev->bus)
++ || !(hcd = bus->hcpriv)
++ || !(pdev = hcd->pdev)
++ || !pdev->dma_mask)
++ return;
++
++ dma_unmap_sg (pdev, sg, n_hw_ents,
++ usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
++}
++
++/**
++ * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
++ * @dev: device to which the scatterlist will be mapped
++ * @pipe: endpoint defining the mapping direction
++ * @sg: the scatterlist to map
++ * @nents: the number of entries in the scatterlist
++ *
++ * Return value is either < 0 (indicating no buffers could be mapped), or
++ * the number of DMA mapping array entries in the scatterlist.
++ *
++ * The caller is responsible for placing the resulting DMA addresses from
++ * the scatterlist into URB transfer buffer pointers, and for setting the
++ * URB_NO_TRANSFER_DMA_MAP transfer flag in each of those URBs.
++ *
++ * Top I/O rates come from queuing URBs, instead of waiting for each one
++ * to complete before starting the next I/O. This is particularly easy
++ * to do with scatterlists. Just allocate and submit one URB for each DMA
++ * mapping entry returned, stopping on the first error or when all succeed.
++ * Better yet, use the usb_sg_*() calls, which do that (and more) for you.
++ *
++ * This call would normally be used when translating scatterlist requests,
++ * rather than usb_buffer_map(), since on some hardware (with IOMMUs) it
++ * may be able to coalesce mappings for improved I/O efficiency.
++ *
++ * Reverse the effect of this call with usb_buffer_unmap_sg().
++ */
++static int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
++ struct scatterlist *sg, int nents)
++{
++ struct usb_bus *bus;
++ struct usb_hcd *hcd;
++ struct pci_dev *pdev;
++
++ if (!dev
++ || usb_pipecontrol (pipe)
++ || !(bus = dev->bus)
++ || !(hcd = bus->hcpriv)
++ || !(pdev = hcd->pdev)
++ || !pdev->dma_mask)
++ return -1;
++
++ // FIXME generic api broken like pci, can't report errors
++ return dma_map_sg (pdev, sg, nents,
++ usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
++}
++
++static void sg_clean (struct usb_sg_request *io)
++{
++ struct usb_hcd *hcd = io->dev->bus->hcpriv;
++ struct pci_dev *pdev = hcd->pdev;
++
++ if (io->urbs) {
++ while (io->entries--)
++ usb_free_urb (io->urbs [io->entries]);
++ kfree (io->urbs);
++ io->urbs = 0;
++ }
++ if (pdev->dma_mask != 0)
++ usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents);
++ io->dev = 0;
++}
++
++static void sg_complete (struct urb *urb)
++{
++ struct usb_sg_request *io = (struct usb_sg_request *) urb->context;
++
++ spin_lock (&io->lock);
++
++ /* In 2.5 we require hcds' endpoint queues not to progress after fault
++ * reports, until the completion callback (this!) returns. That lets
++ * device driver code (like this routine) unlink queued urbs first,
++ * if it needs to, since the HC won't work on them at all. So it's
++ * not possible for page N+1 to overwrite page N, and so on.
++ *
++ * That's only for "hard" faults; "soft" faults (unlinks) sometimes
++ * complete before the HCD can get requests away from hardware,
++ * though never during cleanup after a hard fault.
++ */
++ if (io->status
++ && (io->status != -ECONNRESET
++ || urb->status != -ECONNRESET)
++ && urb->actual_length) {
++ US_DEBUGP("Error: %s ep%d%s scatterlist error %d/%d\n",
++ io->dev->devpath,
++ usb_pipeendpoint (urb->pipe),
++ usb_pipein (urb->pipe) ? "in" : "out",
++ urb->status, io->status);
++ // BUG ();
++ }
++
++ if (urb->status && urb->status != -ECONNRESET) {
++ int i, found, status;
++
++ io->status = urb->status;
++
++ /* the previous urbs, and this one, completed already.
++ * unlink pending urbs so they won't rx/tx bad data.
++ */
++ for (i = 0, found = 0; i < io->entries; i++) {
++ if (!io->urbs [i])
++ continue;
++ if (found) {
++ status = usb_unlink_urb (io->urbs [i]);
++ if (status != -EINPROGRESS && status != -EBUSY)
++ US_DEBUGP("Error: %s, unlink --> %d\n", __FUNCTION__, status);
++ } else if (urb == io->urbs [i])
++ found = 1;
++ }
++ }
++ urb->dev = 0;
++
++ /* on the last completion, signal usb_sg_wait() */
++ io->bytes += urb->actual_length;
++ io->count--;
++ if (!io->count)
++ complete (&io->complete);
++
++ spin_unlock (&io->lock);
++}
++
++/**
++ * usb_sg_init - initializes scatterlist-based bulk/interrupt I/O request
++ * @io: request block being initialized. until usb_sg_wait() returns,
++ * treat this as a pointer to an opaque block of memory,
++ * @dev: the usb device that will send or receive the data
++ * @pipe: endpoint "pipe" used to transfer the data
++ * @period: polling rate for interrupt endpoints, in frames or
++ * (for high speed endpoints) microframes; ignored for bulk
++ * @sg: scatterlist entries
++ * @nents: how many entries in the scatterlist
++ * @length: how many bytes to send from the scatterlist, or zero to
++ * send every byte identified in the list.
++ * @mem_flags: SLAB_* flags affecting memory allocations in this call
++ *
++ * Returns zero for success, else a negative errno value. This initializes a
++ * scatter/gather request, allocating resources such as I/O mappings and urb
++ * memory (except maybe memory used by USB controller drivers).
++ *
++ * The request must be issued using usb_sg_wait(), which waits for the I/O to
++ * complete (or to be canceled) and then cleans up all resources allocated by
++ * usb_sg_init().
++ *
++ * The request may be canceled with usb_sg_cancel(), either before or after
++ * usb_sg_wait() is called.
++ */
++int usb_sg_init (
++ struct usb_sg_request *io,
++ struct usb_device *dev,
++ unsigned pipe,
++ unsigned period,
++ struct scatterlist *sg,
++ int nents,
++ size_t length,
++ int mem_flags
++)
++{
++ int i;
++ int urb_flags;
++ int dma;
++ struct usb_hcd *hcd;
++
++ hcd = dev->bus->hcpriv;
++
++ if (!io || !dev || !sg
++ || usb_pipecontrol (pipe)
++ || usb_pipeisoc (pipe)
++ || nents <= 0)
++ return -EINVAL;
++
++ spin_lock_init (&io->lock);
++ io->dev = dev;
++ io->pipe = pipe;
++ io->sg = sg;
++ io->nents = nents;
++
++ /* not all host controllers use DMA (like the mainstream pci ones);
++ * they can use PIO (sl811) or be software over another transport.
++ */
++ dma = (hcd->pdev->dma_mask != 0);
++ if (dma)
++ io->entries = usb_buffer_map_sg (dev, pipe, sg, nents);
++ else
++ io->entries = nents;
++
++ /* initialize all the urbs we'll use */
++ if (io->entries <= 0)
++ return io->entries;
++
++ io->count = 0;
++ io->urbs = kmalloc (io->entries * sizeof *io->urbs, mem_flags);
++ if (!io->urbs)
++ goto nomem;
++
++ urb_flags = USB_ASYNC_UNLINK | URB_NO_INTERRUPT | URB_NO_TRANSFER_DMA_MAP;
++ if (usb_pipein (pipe))
++ urb_flags |= URB_SHORT_NOT_OK;
++
++ for (i = 0; i < io->entries; i++, io->count = i) {
++ unsigned len;
++
++ io->urbs [i] = usb_alloc_urb (0);
++ if (!io->urbs [i]) {
++ io->entries = i;
++ goto nomem;
++ }
++
++ io->urbs [i]->dev = 0;
++ io->urbs [i]->pipe = pipe;
++ io->urbs [i]->interval = period;
++ io->urbs [i]->transfer_flags = urb_flags;
++
++ io->urbs [i]->complete = sg_complete;
++ io->urbs [i]->context = io;
++ io->urbs [i]->status = -EINPROGRESS;
++ io->urbs [i]->actual_length = 0;
++
++ if (dma) {
++ /* hc may use _only_ transfer_dma */
++ io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
++ len = sg_dma_len (sg + i);
++ } else {
++ /* hc may use _only_ transfer_buffer */
++ io->urbs [i]->transfer_buffer =
++ page_address (sg [i].page) + sg [i].offset;
++ len = sg [i].length;
++ }
++
++ if (length) {
++ len = min_t (unsigned, len, length);
++ length -= len;
++ if (length == 0)
++ io->entries = i + 1;
++ }
++ io->urbs [i]->transfer_buffer_length = len;
++ }
++ io->urbs [--i]->transfer_flags &= ~URB_NO_INTERRUPT;
++
++ /* transaction state */
++ io->status = 0;
++ io->bytes = 0;
++ init_completion (&io->complete);
++ return 0;
++
++nomem:
++ sg_clean (io);
++ return -ENOMEM;
++}
++
++/**
++ * usb_sg_cancel - stop scatter/gather i/o issued by usb_sg_wait()
++ * @io: request block, initialized with usb_sg_init()
++ *
++ * This stops a request after it has been started by usb_sg_wait().
++ * It can also prevents one initialized by usb_sg_init() from starting,
++ * so that call just frees resources allocated to the request.
++ */
++void usb_sg_cancel (struct usb_sg_request *io)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave (&io->lock, flags);
++
++ /* shut everything down, if it didn't already */
++ if (!io->status) {
++ int i;
++
++ io->status = -ECONNRESET;
++ for (i = 0; i < io->entries; i++) {
++ int retval;
++
++ if (!io->urbs [i]->dev)
++ continue;
++ retval = usb_unlink_urb (io->urbs [i]);
++ if (retval != -EINPROGRESS && retval != -EBUSY)
++ US_DEBUGP("WARNING: %s, unlink --> %d\n", __FUNCTION__, retval);
++ }
++ }
++ spin_unlock_irqrestore (&io->lock, flags);
++}
++
++/**
++ * usb_sg_wait - synchronously execute scatter/gather request
++ * @io: request block handle, as initialized with usb_sg_init().
++ * some fields become accessible when this call returns.
++ * Context: !in_interrupt ()
++ *
++ * This function blocks until the specified I/O operation completes. It
++ * leverages the grouping of the related I/O requests to get good transfer
++ * rates, by queueing the requests. At higher speeds, such queuing can
++ * significantly improve USB throughput.
++ *
++ * There are three kinds of completion for this function.
++ * (1) success, where io->status is zero. The number of io->bytes
++ * transferred is as requested.
++ * (2) error, where io->status is a negative errno value. The number
++ * of io->bytes transferred before the error is usually less
++ * than requested, and can be nonzero.
++ * (3) cancelation, a type of error with status -ECONNRESET that
++ * is initiated by usb_sg_cancel().
++ *
++ * When this function returns, all memory allocated through usb_sg_init() or
++ * this call will have been freed. The request block parameter may still be
++ * passed to usb_sg_cancel(), or it may be freed. It could also be
++ * reinitialized and then reused.
++ *
++ * Data Transfer Rates:
++ *
++ * Bulk transfers are valid for full or high speed endpoints.
++ * The best full speed data rate is 19 packets of 64 bytes each
++ * per frame, or 1216 bytes per millisecond.
++ * The best high speed data rate is 13 packets of 512 bytes each
++ * per microframe, or 52 KBytes per millisecond.
++ *
++ * The reason to use interrupt transfers through this API would most likely
++ * be to reserve high speed bandwidth, where up to 24 KBytes per millisecond
++ * could be transferred. That capability is less useful for low or full
++ * speed interrupt endpoints, which allow at most one packet per millisecond,
++ * of at most 8 or 64 bytes (respectively).
++ */
++void usb_sg_wait (struct usb_sg_request *io)
++{
++ int i, entries = io->entries;
++
++ /* queue the urbs. */
++ spin_lock_irq (&io->lock);
++ for (i = 0; i < entries && !io->status; i++) {
++ int retval;
++
++ io->urbs [i]->dev = io->dev;
++ retval = usb_submit_urb (io->urbs [i]);
++
++ /* after we submit, let completions or cancelations fire;
++ * we handshake using io->status.
++ */
++ spin_unlock_irq (&io->lock);
++ switch (retval) {
++ /* maybe we retrying will recover */
++ case -ENXIO: // hc didn't queue this one
++ case -EAGAIN:
++ case -ENOMEM:
++ io->urbs [i]->dev = 0;
++ retval = 0;
++ i--;
++ yield ();
++ break;
++
++ /* no error? continue immediately.
++ *
++ * NOTE: to work better with UHCI (4K I/O buffer may
++ * need 3K of TDs) it may be good to limit how many
++ * URBs are queued at once; N milliseconds?
++ */
++ case 0:
++ cpu_relax ();
++ break;
++
++ /* fail any uncompleted urbs */
++ default:
++ spin_lock_irq (&io->lock);
++ io->count -= entries - i;
++ if (io->status == -EINPROGRESS)
++ io->status = retval;
++ if (io->count == 0)
++ complete (&io->complete);
++ spin_unlock_irq (&io->lock);
++
++ io->urbs [i]->dev = 0;
++ io->urbs [i]->status = retval;
++
++ US_DEBUGP("%s, submit --> %d\n", __FUNCTION__, retval);
++ usb_sg_cancel (io);
++ }
++ spin_lock_irq (&io->lock);
++ if (retval && io->status == -ECONNRESET)
++ io->status = retval;
++ }
++ spin_unlock_irq (&io->lock);
++
++ /* OK, yes, this could be packaged as non-blocking.
++ * So could the submit loop above ... but it's easier to
++ * solve neither problem than to solve both!
++ */
++ wait_for_completion (&io->complete);
++
++ sg_clean (io);
++}
++
++/*
++ * Interpret the results of a URB transfer
++ *
++ * This function prints appropriate debugging messages, clears halts on
++ * non-control endpoints, and translates the status to the corresponding
++ * USB_STOR_XFER_xxx return code.
++ */
++static int interpret_urb_result(struct us_data *us, unsigned int pipe,
++ unsigned int length, int result, unsigned int partial)
++{
++ US_DEBUGP("Status code %d; transferred %u/%u\n",
++ result, partial, length);
++ switch (result) {
++
++ /* no error code; did we send all the data? */
++ case 0:
++ if (partial != length) {
++ US_DEBUGP("-- short transfer\n");
++ return USB_STOR_XFER_SHORT;
++ }
++
++ US_DEBUGP("-- transfer complete\n");
++ return USB_STOR_XFER_GOOD;
++
++ /* stalled */
++ case -EPIPE:
++ /* for control endpoints, (used by CB[I]) a stall indicates
++ * a failed command */
++ if (usb_pipecontrol(pipe)) {
++ US_DEBUGP("-- stall on control pipe\n");
++ return USB_STOR_XFER_STALLED;
++ }
++
++ /* for other sorts of endpoint, clear the stall */
++ US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
++ if (usb_stor_clear_halt(us, pipe) < 0)
++ return USB_STOR_XFER_ERROR;
++ return USB_STOR_XFER_STALLED;
++
++ /* timeout or excessively long NAK */
++ case -ETIMEDOUT:
++ US_DEBUGP("-- timeout or NAK\n");
++ return USB_STOR_XFER_ERROR;
++
++ /* babble - the device tried to send more than we wanted to read */
++ case -EOVERFLOW:
++ US_DEBUGP("-- babble\n");
++ return USB_STOR_XFER_LONG;
++
++ /* the transfer was cancelled by abort, disconnect, or timeout */
++ case -ECONNRESET:
++ US_DEBUGP("-- transfer cancelled\n");
++ return USB_STOR_XFER_ERROR;
++
++ /* short scatter-gather read transfer */
++ case -EREMOTEIO:
++ US_DEBUGP("-- short read transfer\n");
++ return USB_STOR_XFER_SHORT;
++
++ /* abort or disconnect in progress */
++ case -EIO:
++ US_DEBUGP("-- abort or disconnect in progress\n");
++ return USB_STOR_XFER_ERROR;
++
++ /* the catch-all error case */
++ default:
++ US_DEBUGP("-- unknown error\n");
++ return USB_STOR_XFER_ERROR;
++ }
++}
++
++/*
++ * Transfer a scatter-gather list via bulk transfer
++ *
++ * This function does basically the same thing as usb_stor_bulk_msg()
++ * above, but it uses the usbcore scatter-gather library.
++ */
++int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
++ struct scatterlist *sg, int num_sg, unsigned int length,
++ unsigned int *act_len)
++{
++ int result;
++
++ /* don't submit s-g requests during abort/disconnect processing */
++ if (us->flags & ABORTING_OR_DISCONNECTING)
++ return USB_STOR_XFER_ERROR;
++
++ /* initialize the scatter-gather request block */
++ US_DEBUGP("%s: xfer %u bytes, %d entries\n", __FUNCTION__,
++ length, num_sg);
++ result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0,
++ sg, num_sg, length, SLAB_NOIO);
++ if (result) {
++ US_DEBUGP("usb_sg_init returned %d\n", result);
++ return USB_STOR_XFER_ERROR;
++ }
++
++ /* since the block has been initialized successfully, it's now
++ * okay to cancel it */
++ set_bit(US_FLIDX_SG_ACTIVE, &us->flags);
++
++ /* did an abort/disconnect occur during the submission? */
++ if (us->flags & ABORTING_OR_DISCONNECTING) {
++
++ /* cancel the request, if it hasn't been cancelled already */
++ if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->flags)) {
++ US_DEBUGP("-- cancelling sg request\n");
++ usb_sg_cancel(&us->current_sg);
++ }
++ }
++
++ /* wait for the completion of the transfer */
++ usb_sg_wait(&us->current_sg);
++ clear_bit(US_FLIDX_SG_ACTIVE, &us->flags);
++
++ result = us->current_sg.status;
++ if (act_len)
++ *act_len = us->current_sg.bytes;
++ return interpret_urb_result(us, pipe, length, result,
++ us->current_sg.bytes);
++}
++
+ /*
+ * Transfer an entire SCSI command's worth of data payload over the bulk
+ * pipe.
+@@ -569,6 +1122,8 @@
+ struct scatterlist *sg;
+ unsigned int total_transferred = 0;
+ unsigned int transfer_amount;
++ unsigned int partial;
++ unsigned int pipe;
+
+ /* calculate how much we want to transfer */
+ transfer_amount = usb_stor_transfer_length(srb);
+@@ -585,23 +1140,34 @@
+ * make the appropriate requests for each, until done
+ */
+ sg = (struct scatterlist *) srb->request_buffer;
+- for (i = 0; i < srb->use_sg; i++) {
+-
+- /* transfer the lesser of the next buffer or the
+- * remaining data */
+- if (transfer_amount - total_transferred >=
+- sg[i].length) {
+- result = usb_stor_transfer_partial(us,
+- sg[i].address, sg[i].length);
+- total_transferred += sg[i].length;
+- } else
+- result = usb_stor_transfer_partial(us,
+- sg[i].address,
+- transfer_amount - total_transferred);
+-
+- /* if we get an error, end the loop here */
+- if (result)
+- break;
++ if (us->pusb_dev->speed == USB_SPEED_HIGH) {
++ /* calculate the appropriate pipe information */
++ if (us->srb->sc_data_direction == SCSI_DATA_READ)
++ pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
++ else
++ pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
++ /* use the usb core scatter-gather primitives */
++ result = usb_stor_bulk_transfer_sglist(us, pipe,
++ sg, srb->use_sg, transfer_amount, &partial);
++ } else {
++ for (i = 0; i < srb->use_sg; i++) {
++
++ /* transfer the lesser of the next buffer or the
++ * remaining data */
++ if (transfer_amount - total_transferred >=
++ sg[i].length) {
++ result = usb_stor_transfer_partial(us,
++ sg[i].address, sg[i].length);
++ total_transferred += sg[i].length;
++ } else
++ result = usb_stor_transfer_partial(us,
++ sg[i].address,
++ transfer_amount - total_transferred);
++
++ /* if we get an error, end the loop here */
++ if (result)
++ break;
++ }
+ }
+ }
+ else
+diff -ur linux.old/drivers/usb/storage/transport.h linux.dev/drivers/usb/storage/transport.h
+--- linux.old/drivers/usb/storage/transport.h 2003-08-25 13:44:42.000000000 +0200
++++ linux.dev/drivers/usb/storage/transport.h 2006-07-30 12:10:16.000000000 +0200
+@@ -127,6 +127,16 @@
+ #define US_BULK_TRANSFER_ABORTED 3 /* transfer canceled */
+
+ /*
++ * usb_stor_bulk_transfer_xxx() return codes, in order of severity
++ */
++
++#define USB_STOR_XFER_GOOD 0 /* good transfer */
++#define USB_STOR_XFER_SHORT 1 /* transferred less than expected */
++#define USB_STOR_XFER_STALLED 2 /* endpoint stalled */
++#define USB_STOR_XFER_LONG 3 /* device tried to send too much */
++#define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */
++
++/*
+ * Transport return codes
+ */
+
+diff -ur linux.old/drivers/usb/storage/usb.h linux.dev/drivers/usb/storage/usb.h
+--- linux.old/drivers/usb/storage/usb.h 2005-04-04 03:42:20.000000000 +0200
++++ linux.dev/drivers/usb/storage/usb.h 2006-07-30 12:11:06.000000000 +0200
+@@ -111,6 +111,60 @@
+ typedef void (*proto_cmnd)(Scsi_Cmnd*, struct us_data*);
+ typedef void (*extra_data_destructor)(void *); /* extra data destructor */
+
++/* Dynamic flag definitions: used in set_bit() etc. */
++#define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */
++#define US_FLIDX_SG_ACTIVE 19 /* 0x00080000 current_sg is in use */
++#define US_FLIDX_ABORTING 20 /* 0x00100000 abort is in progress */
++#define US_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect in progress */
++#define ABORTING_OR_DISCONNECTING ((1UL << US_FLIDX_ABORTING) | \
++ (1UL << US_FLIDX_DISCONNECTING))
++#define US_FLIDX_RESETTING 22 /* 0x00400000 device reset in progress */
++
++/* processing state machine states */
++#define US_STATE_IDLE 1
++#define US_STATE_RUNNING 2
++#define US_STATE_RESETTING 3
++#define US_STATE_ABORTING 4
++
++/**
++ * struct usb_sg_request - support for scatter/gather I/O
++ * @status: zero indicates success, else negative errno
++ * @bytes: counts bytes transferred.
++ *
++ * These requests are initialized using usb_sg_init(), and then are used
++ * as request handles passed to usb_sg_wait() or usb_sg_cancel(). Most
++ * members of the request object aren't for driver access.
++ *
++ * The status and bytecount values are valid only after usb_sg_wait()
++ * returns. If the status is zero, then the bytecount matches the total
++ * from the request.
++ *
++ * After an error completion, drivers may need to clear a halt condition
++ * on the endpoint.
++ */
++struct usb_sg_request {
++ int status;
++ size_t bytes;
++
++ /*
++ * members below are private to usbcore,
++ * and are not provided for driver access!
++ */
++ spinlock_t lock;
++
++ struct usb_device *dev;
++ int pipe;
++ struct scatterlist *sg;
++ int nents;
++
++ int entries;
++ struct urb **urbs;
++
++ int count;
++ struct completion complete;
++};
++
++
+ /* we allocate one of these for every device that we remember */
+ struct us_data {
+ struct us_data *next; /* next device */
+@@ -171,6 +225,7 @@
+ struct urb *current_urb; /* non-int USB requests */
+ struct completion current_done; /* the done flag */
+ unsigned int tag; /* tag for bulk CBW/CSW */
++ struct usb_sg_request current_sg; /* scatter-gather req. */
+
+ /* the semaphore for sleeping the control thread */
+ struct semaphore sema; /* to sleep thread on */
+diff -ur linux.old/include/linux/usb.h linux.dev/include/linux/usb.h
+--- linux.old/include/linux/usb.h 2004-11-17 12:54:22.000000000 +0100
++++ linux.dev/include/linux/usb.h 2006-07-30 12:19:19.000000000 +0200
+@@ -483,6 +483,8 @@
+ #define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */
+ /* ... less overhead for QUEUE_BULK */
+ #define USB_TIMEOUT_KILLED 0x1000 // only set by HCD!
++#define URB_NO_TRANSFER_DMA_MAP 0x0400 /* urb->transfer_dma valid on submit */
++#define URB_NO_SETUP_DMA_MAP 0x0800 /* urb->setup_dma valid on submit */
+
+ struct iso_packet_descriptor
+ {