diff options
| author | claudio <claudio@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-02-09 21:38:27 +0000 |
|---|---|---|
| committer | claudio <claudio@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-02-09 21:38:27 +0000 |
| commit | 85a0242c71e34bdc6daa0abc33f787dc0859dae2 (patch) | |
| tree | c038d4ba0fc014f727be9878a416d19ade7becfa /target/linux/etrax/files | |
| parent | 75d621a3c5be47428d04061841d1d56ebe707264 (diff) | |
Add i2c driver (to etrax) improved by Geert Vancompernolle
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14462 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/etrax/files')
4 files changed, 1416 insertions, 0 deletions
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h new file mode 100644 index 000000000..4235086d5 --- /dev/null +++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h @@ -0,0 +1,49 @@ +#ifndef _LINUX_ETRAXI2C_H
+#define _LINUX_ETRAXI2C_H
+
+/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */
+
+#define ETRAXI2C_IOCTYPE 44
+
+/* supported ioctl _IOC_NR's */
+
+/* in write operations, the argument contains both i2c
+ * slave, register and value.
+ */
+
+#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value))
+#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8))
+
+#define I2C_ARGSLAVE(arg) ((arg) >> 16)
+#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff)
+#define I2C_ARGVALUE(arg) ((arg) & 0xff)
+
+#define I2C_WRITEREG 0x1 /* write to an I2C register */
+#define I2C_READREG 0x2 /* read from an I2C register */
+
+/*
+EXAMPLE usage:
+
+ i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
+ ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
+
+ i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
+ val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
+
+*/
+
+/* Extended part */
+#define I2C_READ 0x4 /* reads from I2C device */
+#define I2C_WRITE 0x3 /* writes to I2C device */
+#define I2C_WRITEREAD 0x5 /* writes to I2C device where to start reading */
+
+typedef struct _I2C_DATA
+{
+ unsigned char slave; /* I2C address (8-bit representation) of slave device */
+ unsigned char wbuf[256]; /* Write buffer (length = 256 bytes) */
+ unsigned int wlen; /* Number of bytes to write from wbuf[] */
+ unsigned char rbuf[256]; /* Read buffer (length = 256 bytes) */
+ unsigned int rlen; /* Number of bytes to read into rbuf[] */
+} I2C_DATA;
+
+#endif
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h new file mode 100644 index 000000000..7de4ad62c --- /dev/null +++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h @@ -0,0 +1,20 @@ +#ifndef _I2C_ERRNO_H
+#define _I2C_ERRNO_H
+
+#define EI2CNOERRORS 0 /* All fine */
+#define EI2CBUSNFREE 1 /* I2C bus not free */
+#define EI2CWADDRESS 2 /* Address write failed */
+#define EI2CRADDRESS 3 /* Address read failed */
+#define EI2CSENDDATA 4 /* Sending data failed */
+#define EI2CRECVDATA 5 /* Receiving data failed */
+#define EI2CSTRTCOND 6 /* Start condition failed */
+#define EI2CRSTACOND 7 /* Repeated start condition failed */
+#define EI2CSTOPCOND 8 /* Stop condition failed */
+#define EI2CNOSNDBYT 9 /* Number of send bytes is 0, while there's a send buffer defined */
+#define EI2CNOSNDBUF 10 /* No send buffer defined, while number of send bytes is not 0 */
+#define EI2CNORCVBYT 11 /* Number of receive bytes is 0, while there's a receive buffer defined */
+#define EI2CNORCVBUF 12 /* No receive buffer defined, while number of receive bytes is not 0 */
+#define EI2CNOACKNLD 13 /* No acknowledge received from slave */
+#define EI2CNOMNUMBR 14 /* No MAJOR number received from kernel while registering the device */
+
+#endif /* _I2C_ERRNO_H */
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.c b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.c new file mode 100644 index 000000000..bc2c07ecb --- /dev/null +++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.c @@ -0,0 +1,1316 @@ +/*!***************************************************************************
+*!
+*! FILE NAME : i2c.c
+*!
+*!
+*! ---------------------------------------------------------------------------
+*!
+*! ( C ) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
+*!
+*!***************************************************************************/
+/* $Id: i2c.c,v 1.16 2005/09/29 13:33:35 bjarne Exp $ */
+
+#define DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+//#undef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+
+/******************** INCLUDE FILES SECTION ****************************/
+
+#include <linux/module.h>
+#include <linux/fs.h>
+
+/**GVC**/
+#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+#include <linux/types.h> /* for dev_t */
+#include <linux/cdev.h> /* for struct cdev */
+#endif
+/**END GVC**/
+
+#include "etraxi2c.h"
+
+/**GVC**/
+#include "i2c_errno.h"
+/**END GVC**/
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/arch/io_interface_mux.h>
+#include <asm/uaccess.h>
+
+#include "i2c_gvc.h"
+
+MODULE_DESCRIPTION( "I2C Device Driver - 1.1" );
+
+/*!*********************************************************************
+ *!History I2C driver Geert Vancompernolle
+ *!---------------------------------------
+ *!
+ *! - v1.0:
+ *! First official version.
+ *!
+ *! - v1.1:
+ *! Changes to remove unwanted spikes at ACK/NACK time.
+ *!
+ *!*********************************************************************/
+
+MODULE_LICENSE( "GPL" );
+
+/****************** MACRO's **********************/
+
+#define D( x )
+
+/**GVC**/
+#ifndef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+/**END GVC**/
+#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */
+/**GVC**/
+#endif
+/**END GVC**/
+
+/**GVC**/
+#define WAITONEUS 1
+/* Following are abbreviations taken from Philips I2C standard */
+/* Values are representing time in us and are rounded to next whole number, if relevant */
+#define THDSTA 4 /* Hold delay time for (repeated) START condition */
+#define TLOW 5 /* LOW period of the SCL clock */
+#define THDDAT 1 /* Hold delay time for DATA: value of 0 is allowed but 1 taken to be sure */
+#define TSUDAT 1 /* Set-up time for DATA */
+#define THIGH 4 /* HIGH period of the SCL clock */
+#define TSUSTA 5 /* Set-up time for a repeated START condition */
+#define TSUSTO 4 /* Set-up time for STOP condition */
+#define TBUF 5 /* Bus-free time between STOP and START condition */
+
+#define MAXBUSFREERETRIES 5
+#define MAXRETRIES 3
+#define WRITEADDRESS_MASK ( 0xFE )
+#define READADDRESS_MASK ( 0x01 )
+/**END GVC**/
+
+#define SCL_HIGH 1
+#define SCL_LOW 0
+#define SDA_HIGH 1
+#define SDA_LOW 0
+
+#ifdef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+/* Use PB and not PB_I2C */
+#ifndef CONFIG_ETRAX_I2C_DATA_PORT
+#define CONFIG_ETRAX_I2C_DATA_PORT 0
+#endif
+#ifndef CONFIG_ETRAX_I2C_CLK_PORT
+#define CONFIG_ETRAX_I2C_CLK_PORT 1
+#endif
+
+#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
+#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
+#define i2c_enable()
+#define i2c_disable()
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+#define i2c_sda_dir_out() \
+ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 1 )
+#define i2c_sda_dir_in() \
+ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 0 )
+
+/* control the i2c clock and data signals */
+#define i2c_set_scl( x ) \
+ REG_SHADOW_SET( R_PORT_PB_DATA, port_pb_data_shadow, SCLBIT, x )
+#define i2c_set_sda( x ) \
+ REG_SHADOW_SET( R_PORT_PB_DATA, port_pb_data_shadow, SDABIT, x )
+
+/* read status of SDA bit from the i2c interface */
+#define i2c_sda_is_high() ( ( ( *R_PORT_PB_READ & ( 1 << SDABIT ) ) ) >> SDABIT )
+
+/**GVC**/
+/* read status of SCL bit from the i2c interface */
+#define i2c_scl_is_high() ( ( ( *R_PORT_PB_READ & ( 1 << SCLBIT ) ) ) >> SCLBIT )
+/**END GVC**/
+
+#else
+/* enable or disable the i2c interface */
+#define i2c_enable() *R_PORT_PB_I2C = ( port_pb_i2c_shadow |= IO_MASK( R_PORT_PB_I2C, i2c_en ) )
+#define i2c_disable() *R_PORT_PB_I2C = ( port_pb_i2c_shadow &= ~IO_MASK( R_PORT_PB_I2C, i2c_en ) )
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+#define i2c_sda_dir_out() \
+ *R_PORT_PB_I2C = ( port_pb_i2c_shadow &= ~IO_MASK( R_PORT_PB_I2C, i2c_oe_ ) ); \
+ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1 );
+#define i2c_sda_dir_in() \
+ *R_PORT_PB_I2C = ( port_pb_i2c_shadow |= IO_MASK( R_PORT_PB_I2C, i2c_oe_ ) ); \
+ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0 );
+
+/* control the i2c clock and data signals */
+#define i2c_set_scl( x ) \
+ *R_PORT_PB_I2C = ( port_pb_i2c_shadow = ( port_pb_i2c_shadow & \
+ ~IO_MASK( R_PORT_PB_I2C, i2c_set_scl ) ) | IO_FIELD( R_PORT_PB_I2C, i2c_set_scl, ( x ) ) ); \
+ REG_SHADOW_SET( R_PORT_PB_DATA, port_pb_data_shadow, 1, x );
+
+#define i2c_set_sda( x ) \
+ *R_PORT_PB_I2C = ( port_pb_i2c_shadow = ( port_pb_i2c_shadow & \
+ ~IO_MASK( R_PORT_PB_I2C, i2c_d ) ) | IO_FIELD( R_PORT_PB_I2C, i2c_d, ( x ) ) ); \
+ REG_SHADOW_SET( R_PORT_PB_DATA, port_pb_data_shadow, 0, x );
+
+/* read a bit from the i2c interface */
+#define i2c_sda_is_high() ( *R_PORT_PB_READ & 0x1 )
+#endif
+
+/* use the kernels delay routine */
+#define i2c_delay( usecs ) udelay( usecs )
+
+
+/****************** TYPEDEF's **********************/
+
+
+/****************** STATIC (file scope) VARIABLES **********************/
+static DEFINE_SPINLOCK( i2c_lock ); /* Protect directions etc */
+/**GVC**/
+#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+static const char i2c_name[] = "i2cgvc";
+#else
+static const char i2c_name[] = "i2c";
+#endif
+/**END GVC**/
+
+
+/****************** PROTOTYPING SECTION *************************/
+static int i2c_open( struct inode *inode, struct file *filp );
+static int i2c_release( struct inode *inode, struct file *filp );
+/**GVC**/
+static int i2c_command( unsigned char slave
+ , unsigned char* wbuf
+ , unsigned char wlen
+ , unsigned char* rbuf
+ , unsigned char rlen
+ );
+static int i2c_bus_free_check( unsigned char maxretries );
+static void i2c_finalise( const char* text, unsigned long irqflags );
+/**END GVC**/
+
+
+/************************************************************************/
+/****************** AUXILIARIES *************************/
+/************************************************************************/
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_open
+ *#
+ *# DESCRIPTION : opens an I2C device
+ *#
+ *# PARAMETERS : *inode: reference to inode
+ *# *filp : reference to file pointer
+ *#
+ *#---------------------------------------------------------------------------
+ */
+static int i2c_open( struct inode *inode, struct file *filp )
+{
+ return 0;
+} /* i2c_open */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_release
+ *#
+ *# DESCRIPTION : Releases the I2C device
+ *#
+ *# PARAMETERS : *inode: reference to inode
+ *# *filp : reference to file pointer
+ *#
+ *#---------------------------------------------------------------------------
+ */
+static int i2c_release( struct inode *inode, struct file *filp )
+{
+ return 0;
+} /* i2c_release */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_ioctl
+ *#
+ *# DESCRIPTION : Main device API: ioctl's to write/read
+ *# to/from i2c registers
+ *#
+ *# PARAMETERS : *inode: reference to inode
+ *# *filp : reference to file pointer
+ *# cmd : command to be executed during the ioctl call
+ *# arg : pointer to a structure with the data???
+ *#
+ *# RETURN : result of the ioctl call
+ *#
+ *#---------------------------------------------------------------------------
+ */
+static int i2c_ioctl( struct inode *inode
+ , struct file *file
+ , unsigned int cmd
+ , unsigned long arg
+ )
+{
+ /* the acme ioctls */
+ I2C_DATA i2cdata;
+ int RetVal = EI2CNOERRORS;
+
+ if ( _IOC_TYPE( cmd ) != ETRAXI2C_IOCTYPE )
+ {
+ return ( -EINVAL );
+ }
+
+ switch ( _IOC_NR( cmd ) )
+ {
+ case I2C_WRITEREG:
+ /* write to an i2c slave */
+ RetVal = i2c_writereg( I2C_ARGSLAVE( arg )
+ , I2C_ARGREG( arg )
+ , I2C_ARGVALUE( arg )
+ );
+ break;
+
+ case I2C_READREG:
+ RetVal = i2c_readreg( I2C_ARGSLAVE( arg ), I2C_ARGREG( arg ) );
+ break;
+
+/**GVC**/
+ /* New functions added by GVC */
+ case I2C_READ:
+ copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) );
+ {
+ int RetryCntr = MAXRETRIES;
+
+ do
+ {
+ RetVal = i2c_command( i2cdata.slave
+ , NULL
+ , 0
+ , i2cdata.rbuf
+ , i2cdata.rlen
+ );
+ } while ( ( EI2CNOERRORS != RetVal )
+ &&( --RetryCntr )
+ );
+ }
+ copy_to_user( (char*)arg, (char*)&i2cdata, sizeof( I2C_DATA ) );
+ break;
+
+ case I2C_WRITE:
+ copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) );
+ {
+ int RetryCntr = MAXRETRIES;
+
+ do
+ {
+ RetVal = i2c_command( i2cdata.slave
+ , i2cdata.wbuf
+ , i2cdata.wlen
+ , NULL
+ , 0
+ );
+ } while ( ( EI2CNOERRORS != RetVal )
+ &&( --RetryCntr )
+ );
+ }
+ break;
+
+ case I2C_WRITEREAD:
+ copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) );
+ {
+ int RetryCntr = MAXRETRIES;
+
+ do
+ {
+ RetVal = i2c_command( i2cdata.slave
+ , i2cdata.wbuf
+ , i2cdata.wlen
+ , i2cdata.rbuf
+ , i2cdata.rlen
+ );
+ } while ( ( EI2CNOERRORS != RetVal )
+ &&( --RetryCntr )
+ );
+ }
+ copy_to_user( (char*)arg, (char*)&i2cdata, sizeof( I2C_DATA ) );
+ break;
+/**END GVC**/
+
+ default:
+ RetVal = -EINVAL;
+ }
+
+ return ( -RetVal );
+} /* i2c_ioctl */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_command
+ *#
+ *# DESCRIPTION : general routine to read/write bytes from an I2C device
+ *#
+ *# 'i2c_command()' sends wlen bytes to the I2c bus and receives
+ *# rlen bytes from the I2c bus.
+ *# The data to be send must be placed in wbuf[ 0 ] upto wbuf[ wlen - 1 ).
+ *# The data to be received is assembled in rbuf[ 0 ] upto rbuf[ rlen - 1 ].
+ *#
+ *# If no data is to be sent or received, put appropriate buffer parameter
+ *# to "NULL" and appropriate length parameter to "0".
+ *#
+ *# PARAMETERS : slave = slave address of the I2C device
+ *# wbuf = address of first element of write buffer (wbuf)
+ *# wlen = number of bytes to be written to slave
+ *# rbuf = address of first element of read buffer (rbuf)
+ *# rlen = number of bytes to be read from slave
+ *#
+ *# RETURN :
+ *# EI2CNOERRORS: I2C communication went fine
+ *# EI2CBUSNFREE: I2C bus is not free
+ *# EI2CWADDRESS: I2C write address failed
+ *# EI2CRADDRESS: I2C read address failed
+ *# EI2CSENDDATA: I2C send data failed
+ *# EI2CRECVDATA: I2C receive data failed
+ *# EI2CSTRTCOND: I2C start condition failed
+ *# EI2CRSTACOND: I2C repeated start condition failed
+ *# EI2CSTOPCOND: I2C stop condition failed
+ *# EI2CNOSNDBYT: I2C no bytes to be sent
+ *# EI2CNOSNDBUF: I2C no send buffer defined
+ *# EI2CNORCVBYT: I2C no bytes to be received
+ *# EI2CNORCVBUF: I2C no receive buffer defined
+ *# EI2CNOACKNLD: I2C no acknowledge received
+ *#
+ *# REMARK :
+ *# First, the send part is completed.
+ *# In the send routine, there is no stop generated. This is because maybe
+ *# a repeated start condition must be generated.
+ *# This happens when we want to receive some data from the I2c bus. If not,
+ *# at the end of the general I2c loop the stopcondition is generated.
+ *# If, on the contrary, there are a number of bytes to be received, a new
+ *# startcondition is generated in the 'if' part of the main I2c routine,
+ *# which controls the receiving part.
+ *# Only when the receiving of data is finished, a final stopcondition is
+ *# generated.
+ *#
+ *#---------------------------------------------------------------------------
+ */
+static int i2c_command( unsigned char slave
+ , unsigned char* wbuf
+ , unsigned char wlen
+ , unsigned char* rbuf
+ , unsigned char rlen
+ )
+{
+ /* Check arguments and report error if relevant... */
+ if ( ( wlen > 0 ) && ( wbuf == NULL ) )
+ {
+ printk( KERN_DEBUG "I2C: EI2CNOSNDBUF\n" );
+ return ( EI2CNOSNDBUF );
+ }
+ else if ( ( wlen == 0 ) && ( wbuf != NULL ) )
+ {
+ printk( KERN_DEBUG "I2C: EI2CNOSNDBYT\n" );
+ return ( EI2CNOSNDBYT );
+ }
+ else if ( ( rlen > 0 ) && ( rbuf == NULL ) )
+ {
+ printk( KERN_DEBUG "I2C: EI2CNORCVBUF\n" );
+ return ( EI2CNORCVBUF );
+ }
+ else if ( ( rlen == 0 ) && ( rbuf != NULL ) )
+ {
+ printk( KERN_DEBUG "I2C: EI2CNORCVBYT\n" );
+ return ( EI2CNORCVBYT );
+ }
+ else if ( EI2CBUSNFREE == i2c_bus_free_check( MAXBUSFREERETRIES ) )
+ {
+ /* There's no need to try more, since we weren't even
+ * able to start the I2C communication.
+ * So, no IRQ flags are stored yet, no changes to any other
+ * stuff like START, STOP, SENDBYTES...
+ * Result, simply write down the error and return the correct error code.
+ */
+ printk( KERN_DEBUG "I2C: EI2CBUSNFREE\n" );
+ return ( EI2CBUSNFREE );
+ }
+ else
+ {
+ /* Finally... We made it... */
+ unsigned long irqflags = 0;
+
+ /* we don't like to be interrupted */
+ local_irq_save( irqflags );
+
+ /* Check if there are bytes to be send,
+ * or if you immediately want to receive data.
+ */
+ if ( 0 < wlen )
+ {
+ /* start I2C communication */
+ if ( EI2CNOERRORS != i2c_start() )
+ {
+ return ( i2c_finalise( "I2C: EI2CSTRTCOND\n", irqflags )
+ , EI2CSTRTCOND
+ );
+ }
+
+ /* send slave address: xxxxxxx0B (last bit must be zero) */
+ if ( EI2CNOERRORS != i2c_outbyte( slave & WRITEADDRESS_MASK ) )
+ {
+ return ( i2c_finalise( "I2C: EI2CWADDRESS\n", irqflags )
+ , EI2CWADDRESS
+ );
+ }
+
+ while ( wlen-- )
+ {
+ /* send register data */
+ if ( EI2CNOERRORS != i2c_outbyte( *wbuf ) )
+ {
+ return ( i2c_finalise( "I2C: EI2CSENDDATA\n", irqflags )
+ , EI2CSENDDATA
+ );
+ }
+
+ wbuf++;
+ };
+
+ i2c_delay( TLOW );
+ }
+
+ /*
+ * Receiving data from I2c_bus
+ * If there are bytes to be received, a new start condition is
+ * generated => Repeated Startcondition.
+ * A final stopcondition is generated at the end of the main I2c
+ * routine.
+ */
+ if ( 0 < rlen )
+ {
+ /*
+ * Generate start condition if wlen == 0
+ * or repeated start condition if wlen != 0...
+ */
+ if ( EI2CNOERRORS != i2c_start() )
+ {
+ return ( i2c_finalise( ( ( 0 < wlen )
+ ? "I2C: EI2CRSTACOND\n"
+ : "I2C: EI2CSTRTCOND\n"
+ )
+ , irqflags
+ )
+ , ( ( 0 < wlen ) ? EI2CRSTACOND : EI2CSTRTCOND )
+ );
+ }
+
+ /* Send ReadAddress: xxxxxxx1B (last bit must be one) */
+ if ( EI2CNOERRORS != i2c_outbyte( slave | READADDRESS_MASK ) )
+ {
+ return ( i2c_finalise( "I2C: EI2CRADDRESS\n", irqflags )
+ , EI2CRADDRESS
+ );
+ }
+
+ while ( rlen-- )
+ {
+ /* fetch register */
+ *rbuf = i2c_inbyte();
+ rbuf++;
+
+ /* last received byte needs to be NACK-ed instead of ACK-ed */
+ if ( rlen )
+ {
+ i2c_sendack();
+ }
+ else
+ {
+ i2c_sendnack();
+ }
+ };
+ }
+
+ /* Generate final stop condition */
+ if ( EI2CNOERRORS != i2c_stop() )
+ {
+ return ( i2c_finalise( "I2C: EI2CSTOPCOND\n", irqflags )
+ , EI2CSTOPCOND
+ );
+ }
+
+ /* enable interrupt again */
+ local_irq_restore( irqflags );
+ }
+
+ return ( EI2CNOERRORS );
+} /* i2c_command */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_bus_free_check
+ *#
+ *# DESCRIPTION : checks if the I2C bus is free before starting
+ *# an I2C communication
+ *#
+ *# PARAMETERS : maxretries, the number of times we will try to release
+ *# the I2C bus
+ *#
+ *# RETURN : I2cStatus_I2cBusNotFreeError in case the bus is not free,
+ *# I2cStatus_I2cNoError otherwise
+ *#
+ *#---------------------------------------------------------------------------
+ */
+static int i2c_bus_free_check( unsigned char maxretries )
+{
+ i2c_sda_dir_in(); /* Release SDA line */
+ i2c_set_scl( SCL_HIGH ); /* put SCL line high */
+
+ i2c_delay( WAITONEUS );
+
+ while ( ( !i2c_sda_is_high() || !i2c_scl_is_high() )
+ &&( maxretries-- )
+ )
+ {
+ /* Try to release I2C bus by generating STOP conditions */
+ i2c_stop();
+ }
+
+ if ( 0 == maxretries )
+ {
+ printk( KERN_DEBUG "I2C: EI2CBUSNFREE\n" );
+ return ( EI2CBUSNFREE );
+ }
+ else
+ {
+ return ( EI2CNOERRORS );
+ }
+} /* i2c_bus_free_check */
+
+
+static void i2c_finalise( const char* errortxt
+ , unsigned long irqflags
+ )
+{
+ printk( KERN_DEBUG "%s", errortxt );
+ local_irq_restore( irqflags );
+ /* The least we can do when things go terribly wrong,
+ * is to try to release the bus.
+ * If this fails, well, then I don't know
+ * what I can do more for the moment...
+ */
+ (void)i2c_bus_free_check( MAXBUSFREERETRIES );
+} /* i2c_finalise */
+
+
+static struct file_operations i2c_fops =
+{
+ .owner = THIS_MODULE
+, .ioctl = i2c_ioctl
+, .open = i2c_open
+, .release = i2c_release
+};
+
+
+/***********************************************************************/
+/************* EXTERNAL FUNCTION DEFINITION SECTION ********************/
+/***********************************************************************/
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_init
+ *#
+ *# DESCRIPTION : initialises the I2C device driver
+ *#
+ *# PARAMETERS :
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int __init i2c_init( void )
+{
+ static int res = 0;
+ static int first = 1;
+
+ if ( !first )
+ {
+ return res;
+ }
+
+ first = 0;
+
+ /* Setup and enable the Port B I2C interface */
+
+#ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+ /* here, we're using the dedicated I2C pins of FoxBoard */
+ if ( ( res = cris_request_io_interface( if_i2c, "I2C" ) ) )
+ {
+ printk( KERN_CRIT "i2c_init: Failed to get IO interface\n" );
+ return res;
+ }
+
+ *R_PORT_PB_I2C = port_pb_i2c_shadow |=
+ IO_STATE( R_PORT_PB_I2C, i2c_en, on ) |
+ IO_FIELD( R_PORT_PB_I2C, i2c_d, 1 ) |
+ IO_FIELD( R_PORT_PB_I2C, i2c_set_scl, 1 ) |
+ IO_STATE( R_PORT_PB_I2C, i2c_oe_, enable );
+
+ port_pb_dir_shadow &= ~IO_MASK( R_PORT_PB_DIR, dir0 );
+ port_pb_dir_shadow &= ~IO_MASK( R_PORT_PB_DIR, dir1 );
+
+ *R_PORT_PB_DIR = ( port_pb_dir_shadow |=
+ IO_STATE( R_PORT_PB_DIR, dir0, input ) |
+ IO_STATE( R_PORT_PB_DIR, dir1, output ) );
+#else
+ /* If everything goes fine, res = 0, meaning "if" fails =>
+ * will do the "else" too and as such initialise the clock port...
+ * Clever trick!
+ */
+ if ( ( res = cris_io_interface_allocate_pins( if_i2c
+ , 'b'
+ , CONFIG_ETRAX_I2C_DATA_PORT
+ , CONFIG_ETRAX_I2C_DATA_PORT
+ )
+ )
+ )
+ {
+ printk( KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n" );
+ return ( res );
+ }
+ /* Same here...*/
+ else if ( ( res = cris_io_interface_allocate_pins( if_i2c
+ , 'b'
+ , CONFIG_ETRAX_I2C_CLK_PORT
+ , CONFIG_ETRAX_I2C_CLK_PORT
+ )
+ )
+ )
+ {
+ cris_io_interface_free_pins( if_i2c
+ , 'b'
+ , CONFIG_ETRAX_I2C_DATA_PORT
+ , CONFIG_ETRAX_I2C_DATA_PORT
+ );
+ printk( KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n" );
+ }
+#endif
+
+ return ( res );
+} /* i2c_init */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_register
+ *#
+ *# DESCRIPTION : this registers the i2c driver as a character device
+ *#
+ *# PARAMETERS :
+ *#
+ *#---------------------------------------------------------------------------
+ */
+static int __init i2c_register( void )
+{
+ int res;
+/**GVC**/
+#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+ dev_t devt;
+ struct cdev *my_i2cdev = NULL;
+#endif
+/**END GVC**/
+
+ res = i2c_init();
+
+ if ( res < 0 )
+ {
+ return res;
+ }
+
+/**GVC**/
+#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+ res = alloc_chrdev_region( &devt, 0, 1, i2c_name );
+
+ if ( res < 0 )
+ {
+ printk( KERN_DEBUG "I2C: EI2CNOMNUMBR\n" );
+ return ( res );
+ }
+
+ my_i2cdev = cdev_alloc();
+ my_i2cdev->ops = &i2c_fops;
+ my_i2cdev->owner = THIS_MODULE;
+
+ /* make device "alive" */
+ res = cdev_add( my_i2cdev, devt, 1 );
+
+ if ( res < 0 )
+ {
+ printk( KERN_DEBUG "I2C: EI2CDADDFAIL\n" );
+ return ( res );
+ }
+#else
+/**END GVC**/
+ res = register_chrdev( I2C_MAJOR, i2c_name, &i2c_fops );
+
+ if ( res < 0 )
+ {
+ printk( KERN_ERR "i2c: couldn't get a major number.\n" );
+ return res;
+ }
+/**GVC**/
+#endif
+/**END GVC**/
+
+ printk( KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n" );
+
+/**GVC**/
+ printk( KERN_INFO " ==> Improvements done by Geert Vancompernolle - December 2006\n" );
+
+#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+ printk( KERN_INFO "I2C Major: %d / I2C Name: %s\n", MAJOR( devt ), i2c_name );
+#else
+/**END GVC**/
+ printk( KERN_INFO "I2C Major: %d / I2C Name: %s\n", I2C_MAJOR, i2c_name );
+/**GVC**/
+#endif
+/**END GVC**/
+
+ return ( 0 );
+} /* i2c_register */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_start
+ *#
+ *# DESCRIPTION : generate i2c start condition
+ *#
+ *# PARAMETERS : none
+ *#
+ *# RETURN : EI2CNOERRORS if OK, EI2CSTRTCOND otherwise
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int i2c_start( void )
+{
+ /* Set SCL=1, SDA=1 */
+ i2c_sda_dir_out();
+ i2c_set_sda( SDA_HIGH );
+ i2c_delay( WAITONEUS );
+ i2c_set_scl( SCL_HIGH );
+ i2c_delay( WAITONEUS );
+
+ /* Set SCL=1, SDA=0 */
+ i2c_set_sda( SDA_LOW );
+ i2c_delay( THDSTA );
+
+ /* Set SCL=0, SDA=0 */
+ i2c_set_scl( SCL_LOW );
+ /* We can take 1 us less than defined in spec (5 us), since the next action
+ * will be to set the dataline high or low and this action is 1 us
+ * before the clock is put high, so that makes our 5 us.
+ */
+ i2c_delay( TLOW - WAITONEUS );
+
+ if ( i2c_sda_is_high() || i2c_scl_is_high() )
+ {
+ printk( KERN_DEBUG "I2C: EI2CSTRTCOND\n" );
+ return ( EI2CSTRTCOND );
+ }
+
+ return ( EI2CNOERRORS );
+} /* i2c_start */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_stop
+ *#
+ *# DESCRIPTION : generate i2c stop condition
+ *#
+ *# PARAMETERS : none
+ *#
+ *# RETURN : none
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int i2c_stop( void )
+{
+ i2c_sda_dir_out();
+
+ /* Set SCL=0, SDA=0 */
+ /* Don't change order, otherwise you might generate a start condition! */
+ i2c_set_scl( SCL_LOW );
+ i2c_delay( WAITONEUS );
+ i2c_set_sda( SDA_LOW );
+ i2c_delay( WAITONEUS );
+
+ /* Set SCL=1, SDA=0 */
+ i2c_set_scl( SCL_HIGH );
+ i2c_delay( TSUSTO );
+
+ /* Set SCL=1, SDA=1 */
+ i2c_set_sda( SDA_HIGH );
+ i2c_delay( TBUF );
+
+ i2c_sda_dir_in();
+
+ if ( !i2c_sda_is_high() || !i2c_scl_is_high() )
+ {
+ printk( KERN_DEBUG "I2C: EI2CSTOPCOND\n" );
+ return ( EI2CSTOPCOND );
+ }
+
+ return ( EI2CNOERRORS );
+} /* i2c_stop */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_outbyte
+ *#
+ *# DESCRIPTION : write a byte to the i2c interface
+ *#
+ *# PARAMETERS : x: byte to be sent on the I2C bus
+ *#
+ *# RETURN : none
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int i2c_outbyte( unsigned char x )
+{
+ int i;
+
+ i2c_sda_dir_out();
+
+ for ( i = 0; i < 8; i++ )
+ {
+ if ( x & 0x80 )
+ {
+ i2c_set_sda( SDA_HIGH );
+ }
+ else
+ {
+ i2c_set_sda( SDA_LOW );
+ }
+
+ i2c_delay( TSUDAT );
+ i2c_set_scl( SCL_HIGH );
+ i2c_delay( THIGH );
+ i2c_set_scl( SCL_LOW );
+ i2c_delay( TSUDAT );
+ i2c_set_sda( SDA_LOW );
+ /* There should be only 5 us between falling edge and new rising
+ * edge of clock pulse.
+ * Since we spend already 1 us since clock edge was low, there are
+ * only ( TLOW - TSUDAT ) us left.
+ * Next to this, since the data line will be set up 1 us before the
+ * clock line is set up, we can reduce the delay with another us.
+ */
+ i2c_delay( TLOW - TSUDAT - WAITONEUS );
+ x <<= 1;
+ }
+
+ /* enable input */
+ i2c_sda_dir_in();
+
+ if ( !i2c_getack() )
+ {
+ printk( KERN_DEBUG "I2C: EI2CNOACKNLD\n" );
+ return( EI2CNOACKNLD );
+ }
+
+ return ( EI2CNOERRORS );
+} /* i2c_outbyte */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_inbyte
+ *#
+ *# DESCRIPTION : read a byte from the i2c interface
+ *#
+ *# PARAMETERS : none
+ *#
+ *# RETURN : returns the byte read from the I2C device
+ *#
+ *#---------------------------------------------------------------------------
+ */
+unsigned char i2c_inbyte( void )
+{
+ unsigned char aBitByte = 0;
+ unsigned char Mask = 0x80; /* !!! ATTENTION: do NOT use 'char', otherwise shifting is wrong!!! */
+ /* Must be UNSIGNED, not SIGNED! */
+
+
+ /* Switch off I2C to get bit */
+ i2c_disable();
+ i2c_sda_dir_in();
+
+ while ( Mask != 0 )
+ {
+ i2c_set_scl( SCL_HIGH );
+ i2c_delay( THIGH );
+
+ if ( i2c_sda_is_high() )
+ {
+ aBitByte |= Mask;
+ }
+
+ i2c_set_scl( SCL_LOW );
+
+ Mask >>= 1;
+
+ i2c_delay( TLOW );
+ }
+
+ /*
+ * we leave the clock low, getbyte is usually followed
+ * by sendack/nack, they assume the clock to be low
+ */
+ return ( aBitByte );
+} /* i2c_inbyte */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_getack
+ *#
+ *# DESCRIPTION : checks if ack was received from ic2
+ *#
+ *# PARAMETERS : none
+ *#
+ *# RETURN : returns the ack state of the I2C device
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int i2c_getack( void )
+{
+ int ack = 1;
+
+ /* generate ACK clock pulse */
+ i2c_set_scl( SCL_HIGH );
+
+ /* switch off I2C */
+ i2c_disable();
+
+ /* now wait for ack */
+ i2c_delay( THIGH );
+ /* check for ack: if SDA is high, then NACK, else ACK */
+ if ( i2c_sda_is_high() )
+ {
+ ack = 0;
+ }
+ else
+ {
+ ack = 1;
+ }
+
+ /* end clock pulse */
+ i2c_enable();
+ i2c_set_scl( SCL_LOW );
+ i2c_sda_dir_out();
+ i2c_set_sda( SDA_LOW );
+
+ /* Since we "lost" already THDDAT time, we can subtract it here... */
+ i2c_delay( TLOW - THDDAT );
+
+ return ( ack );
+} /* i2c_getack */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_sendack
+ *#
+ *# DESCRIPTION : sends ACK on received data
+ *#
+ *# PARAMETERS : none
+ *#
+ *# RETURN : none
+ *#
+ *#---------------------------------------------------------------------------
+ */
+void i2c_sendack( void )
+{
+ /* enable output */
+ /* Clock has been set to TLOW already at end of i2c_inbyte()
+ * and i2c_outbyte(), so no need to do it again.
+ */
+ i2c_sda_dir_out();
+ /* set ack pulse low */
+ i2c_set_sda( SDA_LOW );
+ /* generate clock pulse */
+ i2c_delay( TSUDAT );
+ i2c_set_scl( SCL_HIGH );
+ i2c_delay( THIGH );
+ i2c_set_scl( SCL_LOW );
+ i2c_delay( THDDAT );
+ /* reset data out */
+ i2c_set_sda( SDA_HIGH );
+ /* Subtract time spend already when waited to put SDA high */
+ i2c_delay( TLOW - THDDAT );
+
+ /* release the SDA line */
+ i2c_sda_dir_in();
+} /* i2c_sendack */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_sendnack
+ *#
+ *# DESCRIPTION : sends NACK on received data
+ *#
+ *# PARAMETERS : none
+ *#
+ *# RETURN : none
+ *#
+ *#---------------------------------------------------------------------------
+ */
+void i2c_sendnack( void )
+{
+ /* make sure the SDA line is set high prior to activation of the output.
+ * this way, you avoid an unnecessary peak to ground when a NACK has to
+ * be created.
+ */
+ /* set data high */
+ i2c_set_sda( SDA_HIGH );
+ /* enable output */
+ i2c_sda_dir_out();
+
+ /* generate clock pulse */
+ i2c_delay( TSUDAT );
+ i2c_set_scl( SCL_HIGH );
+ i2c_delay( THIGH );
+ i2c_set_scl( SCL_LOW );
+ i2c_delay( TSUDAT );
+ i2c_set_sda( SDA_LOW );
+ i2c_delay( TLOW - TSUDAT );
+
+ /* There's no need to change the direction of SDA to "in" again,
+ * since a NACK is always followed by a stop condition.
+ * A STOP condition will put the direction of SDA back to "out"
+ * resulting in a useless SDA "dip" on the line...
+ */
+ /* i2c_sda_dir_in(); */
+} /* i2c_sendnack */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_writereg
+ *#
+ *# DESCRIPTION : writes a value to a register of an I2C device
+ *#
+ *# PARAMETERS : theSlave = slave address of the I2C device
+ *# theReg = register of the I2C device that needs to be written
+ *# theValue = value to be written to the register
+ *#
+ *# RETURN : returns OR-ed result of the write action:
+ *# 0 = Ok
+ *# 1 = Slave_NoAck
+ *# 2 = Reg_NoAck
+ *# 4 = Val_NoAck
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int i2c_writereg( unsigned char theSlave
+ , unsigned char theReg
+ , unsigned char theValue
+ )
+{
+ int error, cntr = 3;
+ unsigned long flags;
+
+ spin_lock( &i2c_lock );
+
+ do
+ {
+ error = 0;
+ /* we don't like to be interrupted */
+ local_irq_save( flags );
+
+ i2c_start();
+ /* send slave address */
+ if ( EI2CNOACKNLD == i2c_outbyte( theSlave & 0xfe ) )
+ {
+ error = 1;
+ }
+
+ /* now select register */
+ if ( EI2CNOACKNLD == i2c_outbyte( theReg ) )
+ {
+ error |= 2;
+ }
+
+ /* send register register data */
+ if ( EI2CNOACKNLD == i2c_outbyte( theValue ) )
+ {
+ error |= 4;
+ }
+
+ /* end byte stream */
+ i2c_stop();
+ /* enable interrupt again */
+ local_irq_restore( flags );
+
+ } while ( error && cntr-- );
+
+ i2c_delay( TLOW );
+
+ spin_unlock( &i2c_lock );
+
+ return ( -error );
+} /* i2c_writereg */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_readreg
+ *#
+ *# DESCRIPTION : reads the value from a certain register of an I2C device.
+ *# Function first writes the register that it wants to read
+ *# later on.
+ *#
+ *# PARAMETERS : theSlave = slave address of the I2C device
+ *# theReg = register of the I2C device that needs to be written
+ *#
+ *# RETURN : returns OR-ed result of the write action:
+ *# 0 = Ok
+ *# 1 = Slave_NoAck
+ *# 2 = Reg_NoAck
+ *# 4 = Val_NoAck
+ *#
+ *#---------------------------------------------------------------------------
+ */
+unsigned char i2c_readreg( unsigned char theSlave
+ , unsigned char theReg
+ )
+{
+ unsigned char b = 0;
+ int error, cntr = 3;
+ unsigned long flags;
+
+ spin_lock( &i2c_lock );
+
+ do
+ {
+ error = 0;
+
+ /* we don't like to be interrupted */
+ local_irq_save( flags );
+
+ /* generate start condition */
+ i2c_start();
+
+ /* send slave address */
+ if ( EI2CNOACKNLD == i2c_outbyte( theSlave & 0xfe ) )
+ {
+ error = 1;
+ }
+
+ /* now select register */
+ i2c_sda_dir_out();
+
+ if ( EI2CNOACKNLD == i2c_outbyte( theReg ) )
+ {
+ error |= 2;
+ }
+
+ /* repeat start condition */
+ i2c_delay( TLOW );
+ i2c_start();
+
+ /* send slave address */
+ if ( EI2CNOACKNLD == i2c_outbyte( theSlave | 0x01 ) )
+ {
+ error |= 1;
+ }
+
+ /* fetch register */
+ b = i2c_inbyte();
+ /*
+ * last received byte needs to be nacked
+ * instead of acked
+ */
+ i2c_sendnack();
+
+ /* end sequence */
+ i2c_stop();
+
+ /* enable interrupt again */
+ local_irq_restore( flags );
+
+ } while ( error && cntr-- );
+
+ spin_unlock( &i2c_lock );
+
+ return ( b );
+} /* i2c_readreg */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_read
+ *#
+ *# DESCRIPTION :
+ *#
+ *# PARAMETERS :
+ *#
+ *# RETURN :
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen )
+{
+ return ( i2c_command( slave, NULL, 0, rbuf, rlen ) );
+} /* i2c_read */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_write
+ *#
+ *# DESCRIPTION :
+ *#
+ *# PARAMETERS :
+ *#
+ *# RETURN :
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen )
+{
+ return ( i2c_command( slave, wbuf, wlen, NULL, 0 ) );
+} /* i2c_write */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: i2c_writeread
+ *#
+ *# DESCRIPTION :
+ *#
+ *# PARAMETERS :
+ *#
+ *# RETURN :
+ *#
+ *#---------------------------------------------------------------------------
+ */
+int i2c_writeread( unsigned char slave
+ , unsigned char* wbuf
+ , unsigned char wlen
+ , unsigned char* rbuf
+ , unsigned char rlen
+ )
+{
+ return ( i2c_command( slave, wbuf, wlen, rbuf, rlen ) );
+} /* i2c_writeread */
+
+
+/*#---------------------------------------------------------------------------
+ *#
+ *# FUNCTION NAME: module_init
+ *#
+ *# DESCRIPTION : this makes sure that i2c_register is called during boot
+ *#
+ *# PARAMETERS :
+ *#
+ *#---------------------------------------------------------------------------
+ */
+module_init( i2c_register );
+
+/****************** END OF FILE i2c.c ********************************/
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h new file mode 100644 index 000000000..970705898 --- /dev/null +++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h @@ -0,0 +1,31 @@ +/* $Id: i2c.h,v 1.3 2004/05/28 09:26:59 starvik Exp $ */
+#ifndef _I2C_H
+#define _I2C_H
+
+int i2c_init(void);
+
+/* High level I2C actions */
+int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
+unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
+
+/* Low level I2C */
+int i2c_start(void);
+int i2c_stop(void);
+int i2c_outbyte(unsigned char x);
+unsigned char i2c_inbyte(void);
+int i2c_getack(void);
+void i2c_sendack(void);
+void i2c_sendnack(void);
+
+/**GVC**/
+/* New low level I2C functions */
+int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen );
+int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen );
+int i2c_writeread( unsigned char slave
+ , unsigned char* wbuf
+ , unsigned char wlen
+ , unsigned char* rbuf
+ , unsigned char rlen
+ );
+/**END GVC**/
+#endif /* _I2C_H */
|