strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 1973 deletions

diff --git a/target/linux/etrax-2.6/patches/cris/010-multi-target-build.patch b/target/linux/etrax-2.6/patches/cris/010-multi-target-build.patch
deleted file mode 100644
index 9d3a28b50..000000000
--- a/target/linux/etrax-2.6/patches/cris/010-multi-target-build.patch
+++ /dev/null
@@ -1,1973 +0,0 @@
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile	2007-05-28 16:28:34.000000000 +0200
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile	2007-05-28 17:24:26.000000000 +0200
-@@ -5,7 +5,7 @@
- OBJCOPY = /usr/local/cris/objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
- 
--subdir- := compressed rescue
-+subdir- := compressed 
- targets := Image
- 
- $(obj)/Image: vmlinux FORCE
-@@ -14,8 +14,12 @@
- 
- $(obj)/compressed/vmlinux: $(obj)/Image FORCE
- 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
--	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
- 
- $(obj)/zImage:  $(obj)/compressed/vmlinux
- 	@cp $< $@
-+	@cp $(obj)/compressed/vmlinux $(obj)/zImage_custom
-+	@cp $(obj)/compressed/vmlinux_MCM $(obj)/zImage_MCM 
-+	@cp $(obj)/compressed/vmlinux_416 $(obj)/zImage_416 
-+	@cp $(obj)/compressed/vmlinux_816 $(obj)/zImage_816 
-+	@cp $(obj)/compressed/vmlinux_832 $(obj)/zImage_832 
- 	@echo '  Kernel: $@ is ready'
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile	2007-05-28 16:28:34.000000000 +0200
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile	2007-05-28 17:03:02.000000000 +0200
-@@ -17,18 +17,34 @@
- 
- $(obj)/decompress.o: $(OBJECTS) FORCE
- 	$(call if_changed,ld)
-+	$(LD) $(LDFLAGS) arch/cris/boot/compressed/head_MCM.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_MCM.o
-+	$(LD) $(LDFLAGS) arch/cris/boot/compressed/head_416.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_416.o
-+	$(LD) $(LDFLAGS) arch/cris/boot/compressed/head_816.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_816.o
-+	$(LD) $(LDFLAGS) arch/cris/boot/compressed/head_832.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_832.o
- 
- $(obj)/decompress.bin: $(obj)/decompress.o FORCE
- 	$(call if_changed,objcopy)
-+	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_MCM.o $(obj)/decompress_MCM.bin
-+	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_416.o $(obj)/decompress_416.bin
-+	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_816.o $(obj)/decompress_816.bin
-+	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_832.o $(obj)/decompress_832.bin
-+
-+$(obj)/head.o: $(obj)/head.S .config FORCE
-+	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c $< -o $@
-+	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_MCM.S -o arch/cris/boot/compressed/head_MCM.o
-+	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_416.S -o arch/cris/boot/compressed/head_416.o
-+	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_816.S -o arch/cris/boot/compressed/head_816.o
-+	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_832.S -o arch/cris/boot/compressed/head_832.o
- 
--$(obj)/head.o: $(obj)/head.S .config
--	/usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__ASSEMBLY__ -traditional -c $< -o $@
--
--$(obj)/misc.o: $(obj)/misc.c .config
-+$(obj)/misc.o: $(obj)/misc.c .config FORCE
- 	/usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__KERNEL__ -c $< -o $@
- 
- $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
- 	$(call if_changed,image)
-+	cat $(obj)/decompress_MCM.bin $(obj)/piggy.gz >  $(obj)/vmlinux_MCM
-+	cat $(obj)/decompress_416.bin $(obj)/piggy.gz >  $(obj)/vmlinux_416
-+	cat $(obj)/decompress_816.bin $(obj)/piggy.gz >  $(obj)/vmlinux_816
-+	cat $(obj)/decompress_832.bin $(obj)/piggy.gz >  $(obj)/vmlinux_832
- 
- $(obj)/piggy.gz: $(obj)/../Image FORCE
- 	$(call if_changed,gzip)
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S	2007-05-28 16:42:15.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ * 
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ *       information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ * 
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5  2006/10/13 12:43:11  starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4  2003/09/22 09:21:59  starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3  2003/03/31 09:38:37  starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2  2002/11/19 13:33:29  starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13  2002/10/30 07:42:28  starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12  2002/08/09 11:37:37  orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11  2002/06/04 11:43:21  starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10  2001/10/04 12:00:21  martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9  2001/10/01 14:47:35  bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8  2001/05/15 07:12:45  hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7  2001/04/18 12:05:39  bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6  2001/04/10 06:20:16  starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5  2001/04/09 06:01:13  starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4  2001/03/26 14:24:01  bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3  2001/03/23 08:29:41  starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2  2001/02/08 15:20:00  starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1  2001/01/29 13:08:02  starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+	;; WARNING! The registers r8 and r9 are used as parameters carrying
-+	;; information from the decompressor (if the kernel was compressed). 
-+	;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM	
-+	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+	move.d   $r0, [R_WAITSTATES]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+	move.d   $r0, [R_BUS_CONFIG]
-+	
-+#ifndef CONFIG_ETRAX_SDRAM
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+	move.d   $r0, [R_DRAM_CONFIG]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+	move.d   $r0, [R_DRAM_TIMING]
-+#else
-+	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+	moveq    2, $r6	
-+_sdram_init:
-+	
-+	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+	
-+	; Bank configuration
-+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0
-+	move.d   $r0, [R_SDRAM_CONFIG]
-+
-+	; Calculate value of mrs_data 
-+	; CAS latency = 2 && bus_width = 32 => 0x40
-+	; CAS latency = 3 && bus_width = 32 => 0x60
-+	; CAS latency = 2 && bus_width = 16 => 0x20
-+	; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+	; Check if value is already supplied in kernel config
-+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r2
-+	and.d    0x00ff0000, $r2
-+	bne	 _set_timing
-+	lsrq     16, $r2
-+	
-+	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
-+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
-+	move.d   $r1, $r3
-+ 	and.d    0x03, $r1       ; Get CAS latency
-+	and.d    0x1000, $r3     ; 50 or 100 MHz?
-+	beq      _speed_50
-+	nop
-+_speed_100:		
-+	cmp.d    0x00, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2	; CAS latency = 3 
-+	ba       _bw_check
-+	nop
-+_speed_50:			
-+	cmp.d    0x01, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2       ; CAS latency = 3
-+_bw_check:
-+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r1
-+	and.d    0x800000, $r1	; DRAM width is bit 23
-+	bne      _set_timing
-+	nop
-+	lsrq     1, $r2		;  16 bits. Shift down value.
-+
-+	; Set timing parameters. Starts master clock
-+_set_timing:
-+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
-+	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
-+	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
-+	move.d   $r1, $r5
-+	or.d     0x0000c000, $r1 ; ref = disable
-+	lslq     16, $r2		; mrs data starts at bit 16
-+	or.d     $r2, $r1 
-+	move.d   $r1, [R_SDRAM_TIMING]	
-+		
-+	; Wait 200us
-+	move.d   10000, $r2
-+1:	bne      1b
-+	subq     1, $r2
-+	
-+	; Issue initialization command sequence
-+	move.d   _sdram_commands_start, $r2
-+	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
-+	move.d   _sdram_commands_end,  $r3
-+	and.d    0x000fffff, $r3
-+1:	clear.d  $r4
-+	move.b   [$r2+], $r4
-+	lslq     9, $r4	; Command starts at bit 9
-+	or.d     $r1, $r4
-+	move.d   $r4, [R_SDRAM_TIMING]
-+	nop		; Wait five nop cycles between each command
-+	nop
-+	nop
-+	nop
-+	nop
-+	cmp.d    $r2, $r3
-+	bne      1b
-+	nop
-+	move.d   $r5, [R_SDRAM_TIMING]
-+	subq     1, $r6
-+	bne      _sdram_init
-+	nop
-+	ba       _sdram_commands_end
-+	nop
-+
-+_sdram_commands_start:
-+	.byte   3	; Precharge
-+	.byte   0       ; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   1	; mrs
-+	.byte   0	; nop 
-+_sdram_commands_end:		
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S	2007-05-28 20:02:25.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ * 
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ *       information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ * 
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5  2006/10/13 12:43:11  starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4  2003/09/22 09:21:59  starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3  2003/03/31 09:38:37  starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2  2002/11/19 13:33:29  starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13  2002/10/30 07:42:28  starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12  2002/08/09 11:37:37  orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11  2002/06/04 11:43:21  starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10  2001/10/04 12:00:21  martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9  2001/10/01 14:47:35  bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8  2001/05/15 07:12:45  hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7  2001/04/18 12:05:39  bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6  2001/04/10 06:20:16  starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5  2001/04/09 06:01:13  starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4  2001/03/26 14:24:01  bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3  2001/03/23 08:29:41  starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2  2001/02/08 15:20:00  starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1  2001/01/29 13:08:02  starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+	;; WARNING! The registers r8 and r9 are used as parameters carrying
-+	;; information from the decompressor (if the kernel was compressed). 
-+	;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM	
-+	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+	move.d   $r0, [R_WAITSTATES]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+	move.d   $r0, [R_BUS_CONFIG]
-+	
-+#ifndef CONFIG_ETRAX_SDRAM
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+	move.d   $r0, [R_DRAM_CONFIG]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+	move.d   $r0, [R_DRAM_TIMING]
-+#else
-+	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+	moveq    2, $r6	
-+_sdram_init:
-+	
-+	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+	
-+	; Bank configuration
-+	move.d   0x09603636, $r0
-+	move.d   $r0, [R_SDRAM_CONFIG]
-+
-+	; Calculate value of mrs_data 
-+	; CAS latency = 2 && bus_width = 32 => 0x40
-+	; CAS latency = 3 && bus_width = 32 => 0x60
-+	; CAS latency = 2 && bus_width = 16 => 0x20
-+	; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+	; Check if value is already supplied in kernel config
-+	move.d   0x80008002, $r2
-+	and.d    0x00ff0000, $r2
-+	bne	 _set_timing
-+	lsrq     16, $r2
-+	
-+	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
-+	move.d   0x80008002, $r1
-+	move.d   $r1, $r3
-+ 	and.d    0x03, $r1       ; Get CAS latency
-+	and.d    0x1000, $r3     ; 50 or 100 MHz?
-+	beq      _speed_50
-+	nop
-+_speed_100:		
-+	cmp.d    0x00, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2	; CAS latency = 3 
-+	ba       _bw_check
-+	nop
-+_speed_50:			
-+	cmp.d    0x01, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2       ; CAS latency = 3
-+_bw_check:
-+	move.d   0x09603636, $r1
-+	and.d    0x800000, $r1	; DRAM width is bit 23
-+	bne      _set_timing
-+	nop
-+	lsrq     1, $r2		;  16 bits. Shift down value.
-+
-+	; Set timing parameters. Starts master clock
-+_set_timing:
-+	move.d   0x80008002, $r1
-+	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
-+	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
-+	move.d   $r1, $r5
-+	or.d     0x0000c000, $r1 ; ref = disable
-+	lslq     16, $r2		; mrs data starts at bit 16
-+	or.d     $r2, $r1 
-+	move.d   $r1, [R_SDRAM_TIMING]	
-+		
-+	; Wait 200us
-+	move.d   10000, $r2
-+1:	bne      1b
-+	subq     1, $r2
-+	
-+	; Issue initialization command sequence
-+	move.d   _sdram_commands_start, $r2
-+	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
-+	move.d   _sdram_commands_end,  $r3
-+	and.d    0x000fffff, $r3
-+1:	clear.d  $r4
-+	move.b   [$r2+], $r4
-+	lslq     9, $r4	; Command starts at bit 9
-+	or.d     $r1, $r4
-+	move.d   $r4, [R_SDRAM_TIMING]
-+	nop		; Wait five nop cycles between each command
-+	nop
-+	nop
-+	nop
-+	nop
-+	cmp.d    $r2, $r3
-+	bne      1b
-+	nop
-+	move.d   $r5, [R_SDRAM_TIMING]
-+	subq     1, $r6
-+	bne      _sdram_init
-+	nop
-+	ba       _sdram_commands_end
-+	nop
-+
-+_sdram_commands_start:
-+	.byte   3	; Precharge
-+	.byte   0       ; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   1	; mrs
-+	.byte   0	; nop 
-+_sdram_commands_end:		
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S	2007-05-28 20:04:05.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ * 
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ *       information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ * 
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5  2006/10/13 12:43:11  starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4  2003/09/22 09:21:59  starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3  2003/03/31 09:38:37  starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2  2002/11/19 13:33:29  starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13  2002/10/30 07:42:28  starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12  2002/08/09 11:37:37  orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11  2002/06/04 11:43:21  starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10  2001/10/04 12:00:21  martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9  2001/10/01 14:47:35  bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8  2001/05/15 07:12:45  hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7  2001/04/18 12:05:39  bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6  2001/04/10 06:20:16  starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5  2001/04/09 06:01:13  starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4  2001/03/26 14:24:01  bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3  2001/03/23 08:29:41  starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2  2001/02/08 15:20:00  starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1  2001/01/29 13:08:02  starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+	;; WARNING! The registers r8 and r9 are used as parameters carrying
-+	;; information from the decompressor (if the kernel was compressed). 
-+	;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM	
-+	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+	move.d   $r0, [R_WAITSTATES]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+	move.d   $r0, [R_BUS_CONFIG]
-+	
-+#ifndef CONFIG_ETRAX_SDRAM
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+	move.d   $r0, [R_DRAM_CONFIG]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+	move.d   $r0, [R_DRAM_TIMING]
-+#else
-+	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+	moveq    2, $r6	
-+_sdram_init:
-+	
-+	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+	
-+	; Bank configuration
-+	move.d   0x09603636, $r0
-+	move.d   $r0, [R_SDRAM_CONFIG]
-+
-+	; Calculate value of mrs_data 
-+	; CAS latency = 2 && bus_width = 32 => 0x40
-+	; CAS latency = 3 && bus_width = 32 => 0x60
-+	; CAS latency = 2 && bus_width = 16 => 0x20
-+	; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+	; Check if value is already supplied in kernel config
-+	move.d   0x80008002, $r2
-+	and.d    0x00ff0000, $r2
-+	bne	 _set_timing
-+	lsrq     16, $r2
-+	
-+	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
-+	move.d   0x80008002, $r1
-+	move.d   $r1, $r3
-+ 	and.d    0x03, $r1       ; Get CAS latency
-+	and.d    0x1000, $r3     ; 50 or 100 MHz?
-+	beq      _speed_50
-+	nop
-+_speed_100:		
-+	cmp.d    0x00, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2	; CAS latency = 3 
-+	ba       _bw_check
-+	nop
-+_speed_50:			
-+	cmp.d    0x01, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2       ; CAS latency = 3
-+_bw_check:
-+	move.d   0x09603636, $r1
-+	and.d    0x800000, $r1	; DRAM width is bit 23
-+	bne      _set_timing
-+	nop
-+	lsrq     1, $r2		;  16 bits. Shift down value.
-+
-+	; Set timing parameters. Starts master clock
-+_set_timing:
-+	move.d   0x80008002, $r1
-+	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
-+	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
-+	move.d   $r1, $r5
-+	or.d     0x0000c000, $r1 ; ref = disable
-+	lslq     16, $r2		; mrs data starts at bit 16
-+	or.d     $r2, $r1 
-+	move.d   $r1, [R_SDRAM_TIMING]	
-+		
-+	; Wait 200us
-+	move.d   10000, $r2
-+1:	bne      1b
-+	subq     1, $r2
-+	
-+	; Issue initialization command sequence
-+	move.d   _sdram_commands_start, $r2
-+	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
-+	move.d   _sdram_commands_end,  $r3
-+	and.d    0x000fffff, $r3
-+1:	clear.d  $r4
-+	move.b   [$r2+], $r4
-+	lslq     9, $r4	; Command starts at bit 9
-+	or.d     $r1, $r4
-+	move.d   $r4, [R_SDRAM_TIMING]
-+	nop		; Wait five nop cycles between each command
-+	nop
-+	nop
-+	nop
-+	nop
-+	cmp.d    $r2, $r3
-+	bne      1b
-+	nop
-+	move.d   $r5, [R_SDRAM_TIMING]
-+	subq     1, $r6
-+	bne      _sdram_init
-+	nop
-+	ba       _sdram_commands_end
-+	nop
-+
-+_sdram_commands_start:
-+	.byte   3	; Precharge
-+	.byte   0       ; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   1	; mrs
-+	.byte   0	; nop 
-+_sdram_commands_end:		
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S	2007-05-28 20:04:57.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ * 
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ *       information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ * 
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5  2006/10/13 12:43:11  starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4  2003/09/22 09:21:59  starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3  2003/03/31 09:38:37  starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2  2002/11/19 13:33:29  starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13  2002/10/30 07:42:28  starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12  2002/08/09 11:37:37  orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11  2002/06/04 11:43:21  starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10  2001/10/04 12:00:21  martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9  2001/10/01 14:47:35  bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8  2001/05/15 07:12:45  hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7  2001/04/18 12:05:39  bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6  2001/04/10 06:20:16  starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5  2001/04/09 06:01:13  starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4  2001/03/26 14:24:01  bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3  2001/03/23 08:29:41  starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2  2001/02/08 15:20:00  starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1  2001/01/29 13:08:02  starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+	;; WARNING! The registers r8 and r9 are used as parameters carrying
-+	;; information from the decompressor (if the kernel was compressed). 
-+	;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM	
-+	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+	move.d   $r0, [R_WAITSTATES]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+	move.d   $r0, [R_BUS_CONFIG]
-+	
-+#ifndef CONFIG_ETRAX_SDRAM
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+	move.d   $r0, [R_DRAM_CONFIG]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+	move.d   $r0, [R_DRAM_TIMING]
-+#else
-+	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+	moveq    2, $r6	
-+_sdram_init:
-+	
-+	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+	
-+	; Bank configuration
-+	move.d   0x09603737, $r0
-+	move.d   $r0, [R_SDRAM_CONFIG]
-+
-+	; Calculate value of mrs_data 
-+	; CAS latency = 2 && bus_width = 32 => 0x40
-+	; CAS latency = 3 && bus_width = 32 => 0x60
-+	; CAS latency = 2 && bus_width = 16 => 0x20
-+	; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+	; Check if value is already supplied in kernel config
-+	move.d   0x80008002, $r2
-+	and.d    0x00ff0000, $r2
-+	bne	 _set_timing
-+	lsrq     16, $r2
-+	
-+	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
-+	move.d   0x80008002, $r1
-+	move.d   $r1, $r3
-+ 	and.d    0x03, $r1       ; Get CAS latency
-+	and.d    0x1000, $r3     ; 50 or 100 MHz?
-+	beq      _speed_50
-+	nop
-+_speed_100:		
-+	cmp.d    0x00, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2	; CAS latency = 3 
-+	ba       _bw_check
-+	nop
-+_speed_50:			
-+	cmp.d    0x01, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2       ; CAS latency = 3
-+_bw_check:
-+	move.d   0x09603737, $r1
-+	and.d    0x800000, $r1	; DRAM width is bit 23
-+	bne      _set_timing
-+	nop
-+	lsrq     1, $r2		;  16 bits. Shift down value.
-+
-+	; Set timing parameters. Starts master clock
-+_set_timing:
-+	move.d   0x80008002, $r1
-+	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
-+	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
-+	move.d   $r1, $r5
-+	or.d     0x0000c000, $r1 ; ref = disable
-+	lslq     16, $r2		; mrs data starts at bit 16
-+	or.d     $r2, $r1 
-+	move.d   $r1, [R_SDRAM_TIMING]	
-+		
-+	; Wait 200us
-+	move.d   10000, $r2
-+1:	bne      1b
-+	subq     1, $r2
-+	
-+	; Issue initialization command sequence
-+	move.d   _sdram_commands_start, $r2
-+	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
-+	move.d   _sdram_commands_end,  $r3
-+	and.d    0x000fffff, $r3
-+1:	clear.d  $r4
-+	move.b   [$r2+], $r4
-+	lslq     9, $r4	; Command starts at bit 9
-+	or.d     $r1, $r4
-+	move.d   $r4, [R_SDRAM_TIMING]
-+	nop		; Wait five nop cycles between each command
-+	nop
-+	nop
-+	nop
-+	nop
-+	cmp.d    $r2, $r3
-+	bne      1b
-+	nop
-+	move.d   $r5, [R_SDRAM_TIMING]
-+	subq     1, $r6
-+	bne      _sdram_init
-+	nop
-+	ba       _sdram_commands_end
-+	nop
-+
-+_sdram_commands_start:
-+	.byte   3	; Precharge
-+	.byte   0       ; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   1	; mrs
-+	.byte   0	; nop 
-+_sdram_commands_end:		
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S	2007-05-28 20:03:13.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ * 
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ *       information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ * 
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5  2006/10/13 12:43:11  starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4  2003/09/22 09:21:59  starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3  2003/03/31 09:38:37  starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2  2002/11/19 13:33:29  starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13  2002/10/30 07:42:28  starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12  2002/08/09 11:37:37  orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11  2002/06/04 11:43:21  starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10  2001/10/04 12:00:21  martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9  2001/10/01 14:47:35  bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8  2001/05/15 07:12:45  hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7  2001/04/18 12:05:39  bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6  2001/04/10 06:20:16  starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5  2001/04/09 06:01:13  starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4  2001/03/26 14:24:01  bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3  2001/03/23 08:29:41  starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2  2001/02/08 15:20:00  starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1  2001/01/29 13:08:02  starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+	;; WARNING! The registers r8 and r9 are used as parameters carrying
-+	;; information from the decompressor (if the kernel was compressed). 
-+	;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM	
-+	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+	move.d   $r0, [R_WAITSTATES]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+	move.d   $r0, [R_BUS_CONFIG]
-+	
-+#ifndef CONFIG_ETRAX_SDRAM
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+	move.d   $r0, [R_DRAM_CONFIG]
-+
-+	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+	move.d   $r0, [R_DRAM_TIMING]
-+#else
-+	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+	moveq    2, $r6	
-+_sdram_init:
-+	
-+	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+	
-+	; Bank configuration
-+	move.d   0x09603636, $r0
-+	move.d   $r0, [R_SDRAM_CONFIG]
-+
-+	; Calculate value of mrs_data 
-+	; CAS latency = 2 && bus_width = 32 => 0x40
-+	; CAS latency = 3 && bus_width = 32 => 0x60
-+	; CAS latency = 2 && bus_width = 16 => 0x20
-+	; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+	; Check if value is already supplied in kernel config
-+	move.d   0x80608002, $r2
-+	and.d    0x00ff0000, $r2
-+	bne	 _set_timing
-+	lsrq     16, $r2
-+	
-+	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
-+	move.d   0x80608002, $r1
-+	move.d   $r1, $r3
-+ 	and.d    0x03, $r1       ; Get CAS latency
-+	and.d    0x1000, $r3     ; 50 or 100 MHz?
-+	beq      _speed_50
-+	nop
-+_speed_100:		
-+	cmp.d    0x00, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2	; CAS latency = 3 
-+	ba       _bw_check
-+	nop
-+_speed_50:			
-+	cmp.d    0x01, $r1	; CAS latency = 2?
-+	beq      _bw_check
-+	nop
-+	or.d     0x20, $r2       ; CAS latency = 3
-+_bw_check:
-+	move.d   0x09603636, $r1
-+	and.d    0x800000, $r1	; DRAM width is bit 23
-+	bne      _set_timing
-+	nop
-+	lsrq     1, $r2		;  16 bits. Shift down value.
-+
-+	; Set timing parameters. Starts master clock
-+_set_timing:
-+	move.d   0x80608002, $r1
-+	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
-+	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
-+	move.d   $r1, $r5
-+	or.d     0x0000c000, $r1 ; ref = disable
-+	lslq     16, $r2		; mrs data starts at bit 16
-+	or.d     $r2, $r1 
-+	move.d   $r1, [R_SDRAM_TIMING]	
-+		
-+	; Wait 200us
-+	move.d   10000, $r2
-+1:	bne      1b
-+	subq     1, $r2
-+	
-+	; Issue initialization command sequence
-+	move.d   _sdram_commands_start, $r2
-+	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
-+	move.d   _sdram_commands_end,  $r3
-+	and.d    0x000fffff, $r3
-+1:	clear.d  $r4
-+	move.b   [$r2+], $r4
-+	lslq     9, $r4	; Command starts at bit 9
-+	or.d     $r1, $r4
-+	move.d   $r4, [R_SDRAM_TIMING]
-+	nop		; Wait five nop cycles between each command
-+	nop
-+	nop
-+	nop
-+	nop
-+	cmp.d    $r2, $r3
-+	bne      1b
-+	nop
-+	move.d   $r5, [R_SDRAM_TIMING]
-+	subq     1, $r6
-+	bne      _sdram_init
-+	nop
-+	ba       _sdram_commands_end
-+	nop
-+
-+_sdram_commands_start:
-+	.byte   3	; Precharge
-+	.byte   0       ; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   2	; refresh
-+	.byte   0	; nop
-+	.byte   1	; mrs
-+	.byte   0	; nop 
-+_sdram_commands_end:		
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S	2007-05-28 17:16:28.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ *  arch/cris/boot/compressed/head.S
-+ *
-+ *  Copyright (C) 1999, 2001 Axis Communications AB
-+ *
-+ *  Code that sets up the DRAM registers, calls the
-+ *  decompressor to unpack the piggybacked kernel, and jumps.
-+ *
-+ */
-+
-+#define ASSEMBLER_MACROS_ONLY
-+#include <asm/arch/sv_addr_ag.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define COMMAND_LINE_MAGIC 0x87109563
-+
-+	;; Exported symbols
-+	
-+	.globl	_input_data
-+
-+	
-+	.text
-+
-+	nop
-+	di
-+
-+;; We need to initialze DRAM registers before we start using the DRAM
-+	
-+	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
-+	beq	dram_init_finished
-+	nop
-+	
-+#include "dram_init_416.S"
-+	
-+dram_init_finished:	
-+		
-+	;; Initiate the PA and PB ports
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-+	move.b   r0, [R_PORT_PA_DATA]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-+	move.b   r0, [R_PORT_PA_DIR]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-+	move.b   r0, [R_PORT_PB_DATA]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-+	move.b   r0, [R_PORT_PB_DIR]
-+
-+	;; Setup the stack to a suitably high address.
-+	;; We assume 8 MB is the minimum DRAM in an eLinux
-+	;; product and put the sp at the top for now.
-+
-+	move.d	0x40800000, sp
-+
-+	;; Figure out where the compressed piggyback image is
-+	;; in the flash (since we wont try to copy it to DRAM
-+	;; before unpacking). It is at _edata, but in flash.
-+	;; Use (_edata - basse) as offset to the current PC.
-+	
-+basse:	move.d	pc, r5
-+	and.d	0x7fffffff, r5	; strip any non-cache bit
-+	subq	2, r5		; compensate for the move.d pc instr
-+	move.d	r5, r0		; save for later - flash address of 'basse'
-+	add.d	_edata, r5
-+	sub.d	basse, r5	; r5 = flash address of '_edata'
-+	
-+	;; Copy text+data to DRAM
-+	
-+	move.d	basse, r1	; destination
-+	move.d	_edata, r2	; end destination
-+1:	move.w	[r0+], r3
-+	move.w	r3, [r1+]
-+	cmp.d	r2, r1
-+	bcs	1b
-+	nop
-+
-+	move.d	r5, [_input_data] ; for the decompressor
-+
-+
-+	;; Clear the decompressors BSS (between _edata and _end)
-+	
-+	moveq	0, r0
-+	move.d	_edata, r1
-+	move.d	_end, r2
-+1:	move.w	r0, [r1+]
-+	cmp.d	r2, r1
-+	bcs	1b
-+	nop
-+
-+	;;  Save command line magic and address.
-+	move.d	_cmd_line_magic, $r12
-+	move.d  $r10, [$r12]
-+	move.d	_cmd_line_addr, $r12
-+	move.d  $r11, [$r12]
-+	
-+	;; Do the decompression and save compressed size in _inptr
-+
-+	jsr	_decompress_kernel
-+	
-+	;; Put start address of root partition in r9 so the kernel can use it
-+	;; when mounting from flash
-+
-+	move.d	[_input_data], r9	; flash address of compressed kernel
-+	add.d	[_inptr], r9		; size of compressed kernel
-+
-+	;; Restore command line magic and address.
-+	move.d  _cmd_line_magic, $r10
-+	move.d  [$r10], $r10
-+	move.d  _cmd_line_addr, $r11
-+	move.d  [$r11], $r11
-+
-+	;; Enter the decompressed kernel
-+	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
-+	jump	0x40004000	; kernel is linked to this address
-+	
-+	.data
-+
-+_input_data:
-+	.dword	0		; used by the decompressor
-+_cmd_line_magic:
-+	.dword 0
-+_cmd_line_addr:
-+	.dword 0
-+#include "hw_settings_416.S"
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S	2007-05-28 17:16:58.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ *  arch/cris/boot/compressed/head.S
-+ *
-+ *  Copyright (C) 1999, 2001 Axis Communications AB
-+ *
-+ *  Code that sets up the DRAM registers, calls the
-+ *  decompressor to unpack the piggybacked kernel, and jumps.
-+ *
-+ */
-+
-+#define ASSEMBLER_MACROS_ONLY
-+#include <asm/arch/sv_addr_ag.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define COMMAND_LINE_MAGIC 0x87109563
-+
-+	;; Exported symbols
-+	
-+	.globl	_input_data
-+
-+	
-+	.text
-+
-+	nop
-+	di
-+
-+;; We need to initialze DRAM registers before we start using the DRAM
-+	
-+	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
-+	beq	dram_init_finished
-+	nop
-+	
-+#include "dram_init_816.S"
-+	
-+dram_init_finished:	
-+		
-+	;; Initiate the PA and PB ports
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-+	move.b   r0, [R_PORT_PA_DATA]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-+	move.b   r0, [R_PORT_PA_DIR]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-+	move.b   r0, [R_PORT_PB_DATA]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-+	move.b   r0, [R_PORT_PB_DIR]
-+
-+	;; Setup the stack to a suitably high address.
-+	;; We assume 8 MB is the minimum DRAM in an eLinux
-+	;; product and put the sp at the top for now.
-+
-+	move.d	0x40800000, sp
-+
-+	;; Figure out where the compressed piggyback image is
-+	;; in the flash (since we wont try to copy it to DRAM
-+	;; before unpacking). It is at _edata, but in flash.
-+	;; Use (_edata - basse) as offset to the current PC.
-+	
-+basse:	move.d	pc, r5
-+	and.d	0x7fffffff, r5	; strip any non-cache bit
-+	subq	2, r5		; compensate for the move.d pc instr
-+	move.d	r5, r0		; save for later - flash address of 'basse'
-+	add.d	_edata, r5
-+	sub.d	basse, r5	; r5 = flash address of '_edata'
-+	
-+	;; Copy text+data to DRAM
-+	
-+	move.d	basse, r1	; destination
-+	move.d	_edata, r2	; end destination
-+1:	move.w	[r0+], r3
-+	move.w	r3, [r1+]
-+	cmp.d	r2, r1
-+	bcs	1b
-+	nop
-+
-+	move.d	r5, [_input_data] ; for the decompressor
-+
-+
-+	;; Clear the decompressors BSS (between _edata and _end)
-+	
-+	moveq	0, r0
-+	move.d	_edata, r1
-+	move.d	_end, r2
-+1:	move.w	r0, [r1+]
-+	cmp.d	r2, r1
-+	bcs	1b
-+	nop
-+
-+	;;  Save command line magic and address.
-+	move.d	_cmd_line_magic, $r12
-+	move.d  $r10, [$r12]
-+	move.d	_cmd_line_addr, $r12
-+	move.d  $r11, [$r12]
-+	
-+	;; Do the decompression and save compressed size in _inptr
-+
-+	jsr	_decompress_kernel
-+	
-+	;; Put start address of root partition in r9 so the kernel can use it
-+	;; when mounting from flash
-+
-+	move.d	[_input_data], r9	; flash address of compressed kernel
-+	add.d	[_inptr], r9		; size of compressed kernel
-+
-+	;; Restore command line magic and address.
-+	move.d  _cmd_line_magic, $r10
-+	move.d  [$r10], $r10
-+	move.d  _cmd_line_addr, $r11
-+	move.d  [$r11], $r11
-+
-+	;; Enter the decompressed kernel
-+	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
-+	jump	0x40004000	; kernel is linked to this address
-+	
-+	.data
-+
-+_input_data:
-+	.dword	0		; used by the decompressor
-+_cmd_line_magic:
-+	.dword 0
-+_cmd_line_addr:
-+	.dword 0
-+#include "hw_settings_816.S"
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S	2007-05-28 17:17:12.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ *  arch/cris/boot/compressed/head.S
-+ *
-+ *  Copyright (C) 1999, 2001 Axis Communications AB
-+ *
-+ *  Code that sets up the DRAM registers, calls the
-+ *  decompressor to unpack the piggybacked kernel, and jumps.
-+ *
-+ */
-+
-+#define ASSEMBLER_MACROS_ONLY
-+#include <asm/arch/sv_addr_ag.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define COMMAND_LINE_MAGIC 0x87109563
-+
-+	;; Exported symbols
-+	
-+	.globl	_input_data
-+
-+	
-+	.text
-+
-+	nop
-+	di
-+
-+;; We need to initialze DRAM registers before we start using the DRAM
-+	
-+	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
-+	beq	dram_init_finished
-+	nop
-+	
-+#include "dram_init_832.S"
-+	
-+dram_init_finished:	
-+		
-+	;; Initiate the PA and PB ports
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-+	move.b   r0, [R_PORT_PA_DATA]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-+	move.b   r0, [R_PORT_PA_DIR]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-+	move.b   r0, [R_PORT_PB_DATA]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-+	move.b   r0, [R_PORT_PB_DIR]
-+
-+	;; Setup the stack to a suitably high address.
-+	;; We assume 8 MB is the minimum DRAM in an eLinux
-+	;; product and put the sp at the top for now.
-+
-+	move.d	0x40800000, sp
-+
-+	;; Figure out where the compressed piggyback image is
-+	;; in the flash (since we wont try to copy it to DRAM
-+	;; before unpacking). It is at _edata, but in flash.
-+	;; Use (_edata - basse) as offset to the current PC.
-+	
-+basse:	move.d	pc, r5
-+	and.d	0x7fffffff, r5	; strip any non-cache bit
-+	subq	2, r5		; compensate for the move.d pc instr
-+	move.d	r5, r0		; save for later - flash address of 'basse'
-+	add.d	_edata, r5
-+	sub.d	basse, r5	; r5 = flash address of '_edata'
-+	
-+	;; Copy text+data to DRAM
-+	
-+	move.d	basse, r1	; destination
-+	move.d	_edata, r2	; end destination
-+1:	move.w	[r0+], r3
-+	move.w	r3, [r1+]
-+	cmp.d	r2, r1
-+	bcs	1b
-+	nop
-+
-+	move.d	r5, [_input_data] ; for the decompressor
-+
-+
-+	;; Clear the decompressors BSS (between _edata and _end)
-+	
-+	moveq	0, r0
-+	move.d	_edata, r1
-+	move.d	_end, r2
-+1:	move.w	r0, [r1+]
-+	cmp.d	r2, r1
-+	bcs	1b
-+	nop
-+
-+	;;  Save command line magic and address.
-+	move.d	_cmd_line_magic, $r12
-+	move.d  $r10, [$r12]
-+	move.d	_cmd_line_addr, $r12
-+	move.d  $r11, [$r12]
-+	
-+	;; Do the decompression and save compressed size in _inptr
-+
-+	jsr	_decompress_kernel
-+	
-+	;; Put start address of root partition in r9 so the kernel can use it
-+	;; when mounting from flash
-+
-+	move.d	[_input_data], r9	; flash address of compressed kernel
-+	add.d	[_inptr], r9		; size of compressed kernel
-+
-+	;; Restore command line magic and address.
-+	move.d  _cmd_line_magic, $r10
-+	move.d  [$r10], $r10
-+	move.d  _cmd_line_addr, $r11
-+	move.d  [$r11], $r11
-+
-+	;; Enter the decompressed kernel
-+	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
-+	jump	0x40004000	; kernel is linked to this address
-+	
-+	.data
-+
-+_input_data:
-+	.dword	0		; used by the decompressor
-+_cmd_line_magic:
-+	.dword 0
-+_cmd_line_addr:
-+	.dword 0
-+#include "hw_settings_832.S"
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S	2007-05-28 17:17:51.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ *  arch/cris/boot/compressed/head.S
-+ *
-+ *  Copyright (C) 1999, 2001 Axis Communications AB
-+ *
-+ *  Code that sets up the DRAM registers, calls the
-+ *  decompressor to unpack the piggybacked kernel, and jumps.
-+ *
-+ */
-+
-+#define ASSEMBLER_MACROS_ONLY
-+#include <asm/arch/sv_addr_ag.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define COMMAND_LINE_MAGIC 0x87109563
-+
-+	;; Exported symbols
-+	
-+	.globl	_input_data
-+
-+	
-+	.text
-+
-+	nop
-+	di
-+
-+;; We need to initialze DRAM registers before we start using the DRAM
-+	
-+	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
-+	beq	dram_init_finished
-+	nop
-+	
-+#include "dram_init_MCM.S"
-+	
-+dram_init_finished:	
-+		
-+	;; Initiate the PA and PB ports
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-+	move.b   r0, [R_PORT_PA_DATA]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-+	move.b   r0, [R_PORT_PA_DIR]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-+	move.b   r0, [R_PORT_PB_DATA]
-+
-+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-+	move.b   r0, [R_PORT_PB_DIR]
-+
-+	;; Setup the stack to a suitably high address.
-+	;; We assume 8 MB is the minimum DRAM in an eLinux
-+	;; product and put the sp at the top for now.
-+
-+	move.d	0x40800000, sp
-+
-+	;; Figure out where the compressed piggyback image is
-+	;; in the flash (since we wont try to copy it to DRAM
-+	;; before unpacking). It is at _edata, but in flash.
-+	;; Use (_edata - basse) as offset to the current PC.
-+	
-+basse:	move.d	pc, r5
-+	and.d	0x7fffffff, r5	; strip any non-cache bit
-+	subq	2, r5		; compensate for the move.d pc instr
-+	move.d	r5, r0		; save for later - flash address of 'basse'
-+	add.d	_edata, r5
-+	sub.d	basse, r5	; r5 = flash address of '_edata'
-+	
-+	;; Copy text+data to DRAM
-+	
-+	move.d	basse, r1	; destination
-+	move.d	_edata, r2	; end destination
-+1:	move.w	[r0+], r3
-+	move.w	r3, [r1+]
-+	cmp.d	r2, r1
-+	bcs	1b
-+	nop
-+
-+	move.d	r5, [_input_data] ; for the decompressor
-+
-+
-+	;; Clear the decompressors BSS (between _edata and _end)
-+	
-+	moveq	0, r0
-+	move.d	_edata, r1
-+	move.d	_end, r2
-+1:	move.w	r0, [r1+]
-+	cmp.d	r2, r1
-+	bcs	1b
-+	nop
-+
-+	;;  Save command line magic and address.
-+	move.d	_cmd_line_magic, $r12
-+	move.d  $r10, [$r12]
-+	move.d	_cmd_line_addr, $r12
-+	move.d  $r11, [$r12]
-+	
-+	;; Do the decompression and save compressed size in _inptr
-+
-+	jsr	_decompress_kernel
-+	
-+	;; Put start address of root partition in r9 so the kernel can use it
-+	;; when mounting from flash
-+
-+	move.d	[_input_data], r9	; flash address of compressed kernel
-+	add.d	[_inptr], r9		; size of compressed kernel
-+
-+	;; Restore command line magic and address.
-+	move.d  _cmd_line_magic, $r10
-+	move.d  [$r10], $r10
-+	move.d  _cmd_line_addr, $r11
-+	move.d  [$r11], $r11
-+
-+	;; Enter the decompressed kernel
-+	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
-+	jump	0x40004000	; kernel is linked to this address
-+	
-+	.data
-+
-+_input_data:
-+	.dword	0		; used by the decompressor
-+_cmd_line_magic:
-+	.dword 0
-+_cmd_line_addr:
-+	.dword 0
-+#include "hw_settings_MCM.S"
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S	2007-05-28 17:14:14.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ * 
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+	
-+	.ascii "HW_PARAM_MAGIC" ; Magic number
-+	.dword 0xc0004000	; Kernel start address
-+
-+	; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+	.dword 0		
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+	.dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+	.dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+	.dword 3
-+#else
-+	.dword 4 ; No debug
-+#endif			
-+
-+	; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword 1
-+#else
-+	.dword 0
-+#endif
-+
-+	; Register values 
-+	.dword R_WAITSTATES
-+	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+	.dword R_BUS_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword R_SDRAM_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
-+	.dword R_SDRAM_TIMING
-+	.dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
-+#else
-+	.dword R_DRAM_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-+	.dword R_DRAM_TIMING
-+	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
-+#endif
-+	.dword R_PORT_PA_SET
-+	.dword PA_SET_VALUE 
-+	.dword R_PORT_PB_SET
-+	.dword PB_SET_VALUE
-+	.dword 0 ; No more register values
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S	2007-05-28 20:12:02.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ * 
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+	
-+	.ascii "HW_PARAM_MAGIC" ; Magic number
-+	.dword 0xc0004000	; Kernel start address
-+
-+	; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+	.dword 0		
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+	.dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+	.dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+	.dword 3
-+#else
-+	.dword 4 ; No debug
-+#endif			
-+
-+	; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword 1
-+#else
-+	.dword 0
-+#endif
-+
-+	; Register values 
-+	.dword R_WAITSTATES
-+	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+	.dword R_BUS_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword R_SDRAM_CONFIG
-+	.dword 0x09603636
-+	.dword R_SDRAM_TIMING
-+	.dword 0x80008002
-+#else
-+	.dword R_DRAM_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-+	.dword R_DRAM_TIMING
-+	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
-+#endif
-+	.dword R_PORT_PA_SET
-+	.dword PA_SET_VALUE 
-+	.dword R_PORT_PB_SET
-+	.dword PB_SET_VALUE
-+	.dword 0 ; No more register values
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S	2007-05-28 20:12:29.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ * 
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+	
-+	.ascii "HW_PARAM_MAGIC" ; Magic number
-+	.dword 0xc0004000	; Kernel start address
-+
-+	; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+	.dword 0		
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+	.dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+	.dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+	.dword 3
-+#else
-+	.dword 4 ; No debug
-+#endif			
-+
-+	; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword 1
-+#else
-+	.dword 0
-+#endif
-+
-+	; Register values 
-+	.dword R_WAITSTATES
-+	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+	.dword R_BUS_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword R_SDRAM_CONFIG
-+	.dword 0x09603636
-+	.dword R_SDRAM_TIMING
-+	.dword 0x80008002
-+#else
-+	.dword R_DRAM_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-+	.dword R_DRAM_TIMING
-+	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
-+#endif
-+	.dword R_PORT_PA_SET
-+	.dword PA_SET_VALUE 
-+	.dword R_PORT_PB_SET
-+	.dword PB_SET_VALUE
-+	.dword 0 ; No more register values
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S	2007-05-28 20:12:55.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ * 
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+	
-+	.ascii "HW_PARAM_MAGIC" ; Magic number
-+	.dword 0xc0004000	; Kernel start address
-+
-+	; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+	.dword 0		
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+	.dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+	.dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+	.dword 3
-+#else
-+	.dword 4 ; No debug
-+#endif			
-+
-+	; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword 1
-+#else
-+	.dword 0
-+#endif
-+
-+	; Register values 
-+	.dword R_WAITSTATES
-+	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+	.dword R_BUS_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword R_SDRAM_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
-+	.dword R_SDRAM_TIMING
-+	.dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
-+#else
-+	.dword R_DRAM_CONFIG
-+	.dword 0x09603737
-+	.dword R_DRAM_TIMING
-+	.dword 0x80008002
-+#endif
-+	.dword R_PORT_PA_SET
-+	.dword PA_SET_VALUE 
-+	.dword R_PORT_PB_SET
-+	.dword PB_SET_VALUE
-+	.dword 0 ; No more register values
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S	2007-05-28 20:11:31.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ * 
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors:  Mikael Starvik (starvik@axis.com)	
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+	
-+	.ascii "HW_PARAM_MAGIC" ; Magic number
-+	.dword 0xc0004000	; Kernel start address
-+
-+	; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+	.dword 0		
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+	.dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+	.dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+	.dword 3
-+#else
-+	.dword 4 ; No debug
-+#endif			
-+
-+	; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword 1
-+#else
-+	.dword 0
-+#endif
-+
-+	; Register values 
-+	.dword R_WAITSTATES
-+	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+	.dword R_BUS_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+	.dword R_SDRAM_CONFIG
-+	.dword 0x09603636
-+	.dword R_SDRAM_TIMING
-+	.dword 0x80608002
-+#else
-+	.dword R_DRAM_CONFIG
-+	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-+	.dword R_DRAM_TIMING
-+	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
-+#endif
-+	.dword R_PORT_PA_SET
-+	.dword PA_SET_VALUE 
-+	.dword R_PORT_PB_SET
-+	.dword PB_SET_VALUE
-+	.dword 0 ; No more register values