made the danube pmu f00 generic

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9759 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 5 insertions, 23 deletions

diff --git a/target/linux/danube/files/drivers/char/danube_led.c b/target/linux/danube/files/drivers/char/danube_led.c
index 38ac4c170..86a92d599 100644
--- a/target/linux/danube/files/drivers/char/danube_led.c
+++ b/target/linux/danube/files/drivers/char/danube_led.c
@@ -29,7 +29,7 @@
 #include <linux/errno.h>
 #include <asm/danube/danube.h>
 #include <asm/danube/danube_gpio.h>
-#include <asm/delay.h>
+#include <asm/danube/danube_pmu.h>
 
 #define DANUBE_LED_CLK_EDGE				DANUBE_LED_FALLING
 //#define DANUBE_LED_CLK_EDGE			DANUBE_LED_RISING
@@ -87,24 +87,6 @@ danube_led_setup_gpio (void)
 	}
 }
 
-static void
-danube_led_enable (void)
-{
-	int err = 1000000;
-
-	writel(readl(DANUBE_PMU_PWDCR) & ~DANUBE_PMU_PWDCR_LED, DANUBE_PMU_PWDCR);
-	while (--err && (readl(DANUBE_PMU_PWDSR) & DANUBE_PMU_PWDCR_LED)) {}
-
-	if (!err)
-		panic("Activating LED in PMU failed!");
-}
-
-static inline void
-danube_led_disable (void)
-{
-	writel(readl(DANUBE_PMU_PWDCR) | DANUBE_PMU_PWDCR_LED, DANUBE_PMU_PWDCR);
-}
-
 static int
 led_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
@@ -187,7 +169,7 @@ danube_led_init (void)
 	writel(readl(DANUBE_LED_CON0) | DANUBE_LED_ADSL_SRC, DANUBE_LED_CON0);
 
 	/* per default, the leds are turned on */
-	danube_led_enable();
+	danube_pmu_enable(DANUBE_PMU_PWDCR_LED);
 
 	danube_led_major = register_chrdev(0, "danube_led", &danube_led_fops);
 
diff --git a/target/linux/danube/files/drivers/net/danube_mii0.c b/target/linux/danube/files/drivers/net/danube_mii0.c
index 63a7febbf..354ccc36d 100644
--- a/target/linux/danube/files/drivers/net/danube_mii0.c
+++ b/target/linux/danube/files/drivers/net/danube_mii0.c
@@ -44,6 +44,7 @@
 #include <asm/danube/danube.h>
 #include <asm/danube/danube_mii0.h>
 #include <asm/danube/danube_dma.h>
+#include <asm/danube/danube_pmu.h>
 
 static struct net_device danube_mii0_dev;
 static unsigned char u_boot_ethaddr[MAX_ADDR_LEN];
@@ -372,9 +373,8 @@ switch_init (struct net_device *dev)
 static void
 danube_sw_chip_init (int mode)
 {
-	writel(readl(DANUBE_PMU_PWDCR) & ~DANUBE_PMU_PWDCR_DMA, DANUBE_PMU_PWDCR);
-	writel(readl(DANUBE_PMU_PWDCR) & ~DANUBE_PMU_PWDCR_PPE, DANUBE_PMU_PWDCR);
-	wmb();
+	danube_pmu_enable(DANUBE_PMU_PWDCR_DMA);
+	danube_pmu_enable(DANUBE_PMU_PWDCR_PPE);
 
 	if(mode == REV_MII_MODE)
 		writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_REVERSE, DANUBE_PPE32_CFG);