[coldfire]: switch to 2.6.38

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31546 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 269 deletions

diff --git a/target/linux/coldfire/files-2.6.31/drivers/net/phy/broadcom522x.c b/target/linux/coldfire/files-2.6.31/drivers/net/phy/broadcom522x.c
deleted file mode 100644
index f20a519e5..000000000
--- a/target/linux/coldfire/files-2.6.31/drivers/net/phy/broadcom522x.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- *Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
- *	Chenghu Wu <b16972@freescale.com>
- *
- * Driver for broadcom PHYs 522x
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/phy.h>
-#include <linux/netdevice.h>
-
-/* DP83865 phy identifier values */
-#define BCM5222_PHY_ID	0x00406320
-
-/* PHY Register */
-#define BCM5222_TIMEOUT                 0x100
-
-/* MII Registers */
-#define BCM5222_CTRL                    0x00
-#define BCM5222_STATUS                  0x01
-#define BCM5222_ID_HIGH                 0x02
-#define BCM5222_ID_LOW                  0x03
-#define BCM5222_AN_ADV                  0x04
-#define BCM5222_AN_LP                   0x05
-#define BCM5222_AN_EXP                  0x06
-#define BCM5222_AN_NEXTPG               0x07
-#define BCM5222_AN_LP_NPTX              0x08
-#define BCM5222_AUX_CS                  0x18
-#define BCM5222_AUX_STATUS              0x19
-
-/* CONTROL Bits */
-#define BCM5222_CTRL_RESET              0x8000
-#define BCM5222_CTRL_LOOPBACK           0x4000
-#define BCM5222_CTRL_FORCE              0x2000
-#define BCM5222_CTRL_AUTOEN             0x1000
-#define BCM5222_CTRL_PWRDN              0x0800
-#define BCM5222_CTRL_ISOLATE            0x0400
-#define BCM5222_CTRL_RESTART            0x0200
-#define BCM5222_CTRL_DUPLEX             0x0100
-#define BCM5222_CTRL_COLLEN             0x0080
-
-/* STATUS Bits */
-#define BCM5222_STATUS_100T4            0x8000
-#define BCM5222_STATUS_100TXFDX         0x4000
-#define BCM5222_STATUS_100TX            0x2000
-#define BCM5222_STATUS_10FDX            0x1000
-#define BCM5222_STATUS_10               0x0800
-#define BCM5222_STATUS_MF_PREAMBLE      0x0040
-#define BCM5222_STATUS_AN_COMPLETE      0x0020
-#define BCM5222_STATUS_REMOTE_FAULT     0x0010
-#define BCM5222_STATUS_AN_CAPABLE       0x0008
-#define BCM5222_STATUS_LINK             0x0004
-#define BCM5222_STATUS_JABBER           0x0002
-#define BCM5222_STATUS_EXT_CAP          0x0001
-
-/* ID Values */
-#define BCM5222_ID_HIGH_VAL             0x0040
-#define BCM5222_ID_LOW_VAL              0x6320
-
-/* Advertise Bits */
-#define BCM5222_AN_ADV_NEXTPG           0x8000
-#define BCM5222_AN_ADV_REMOTE_FAULT     0x2000
-#define BCM5222_AN_ADV_PAUSE            0x0400
-#define BCM5222_AN_ADV_100T4            0x0200
-#define BCM5222_AN_ADV_100TXFDX         0x0100
-#define BCM5222_AN_ADV_100TX            0x0080
-#define BCM5222_AN_ADV_10FDX            0x0040
-#define BCM5222_AN_ADV_10               0x0020
-#define BCM5222_AN_ADV_8023             0x0001
-#define BCM5222_AN_ADV_ALL              \
-	(BCM5222_AN_ADV_100TXFDX | \
-	BCM5222_AN_ADV_100TXFDX | \
-	BCM5222_AN_ADV_100TX | \
-	BCM5222_AN_ADV_10FDX | \
-	BCM5222_AN_ADV_10 |    \
-	BCM5222_AN_ADV_8023)
-
-/* AUX CTRL/STATUS Bits */
-#define BCM5222_AUX_CS_JABBER_DIS       0x8000
-#define BCM5222_AUX_CS_FORCE_LINK       0x4000
-#define BCM5222_AUX_CS_10M_TX_PWR       0x0100
-#define BCM5222_AUX_CS_HSQ_LSQ_MASK     0x00c0
-#define BCM5222_AUX_CS_EDGE_RATE_MASK   0x0030
-#define BCM5222_AUX_CS_AN_IND           0x0008
-#define BCM5222_AUX_CS_SPEED_FORCE      0x0004
-#define BCM5222_AUX_CS_SPEED            0x0002
-#define BCM5222_AUX_CS_DUPLEX           0x0001
-
-/* AUX STATUS Bits */
-#define BCM5222_AUX_STATUS_AN_COMP      0x8000
-#define BCM5222_AUX_STATUS_AN_COMPACK   0x4000
-#define BCM5222_AUX_STATUS_AN_ACKDET    0x2000
-#define BCM5222_AUX_STATUS_AN_ABDET     0x1000
-#define BCM5222_AUX_STATUS_AN_PAUSE     0x0800
-#define BCM5222_AUX_STATUS_AN_HCDMASK   0x0700
-#define BCM5222_AUX_STATUS_AN_PDFAULT   0x0080
-#define BCM5222_AUX_STATUS_LP_RMTFAULT  0x0040
-#define BCM5222_AUX_STATUS_LP_PGRX      0x0020
-#define BCM5222_AUX_STATUS_LP_NEGABLE   0x0010
-#define BCM5222_AUX_STATUS_SPEED        0x0008
-#define BCM5222_AUX_STATUS_LINK         0x0004
-#define BCM5222_AUX_STATUS_AN_EN        0x0002
-#define BCM5222_AUX_STATUS_JABBER       0x0001
-
-static int bcm5222_config_intr(struct phy_device *phydev)
-{
-	int err = 0;
-	printk(KERN_INFO "%s PHY_INTERRUPT %x\n",
-			__func__, phydev->interrupts);
-
-	return err;
-}
-
-static int bcm5222_ack_interrupt(struct phy_device *phydev)
-{
-	return 0;
-}
-
-static int bcm5222_config_init(struct phy_device *phydev)
-{
-	return  bcm5222_ack_interrupt(phydev);
-}
-
-static int bcm5222_config_init_old(struct phy_device *phydev)
-{
-	int timeout;
-	int flag = 1;
-	int ret = phy_read(phydev, BCM5222_AUX_STATUS);
-	if (ret < 0) {
-		printk(KERN_INFO "%s MII_BCM5222_ISR %x\n",
-			__func__, ret);
-	}
-	/*
-	* reset
-	*/
-	phy_write(phydev, BCM5222_CTRL, BCM5222_CTRL_RESET);
-
-	/* check that it cleared */
-	ret = phy_read(phydev, BCM5222_CTRL);
-	printk(KERN_INFO "%s BCM5222_CTRL %x\n",
-		__func__, ret);
-	/*if reset bit is set, return */
-	if (ret & BCM5222_CTRL_RESET) {
-		printk(KERN_ERR "%s %x = BCM5222_CTRL_RESET(%x)\n",
-			__func__, ret, BCM5222_CTRL_RESET);
-		return -ETIME;
-	}
-
-	/*
-	* setup auto-negotiation
-	*/
-
-	/* disable */
-	phy_write(phydev, BCM5222_CTRL, 0);
-	ret = phy_read(phydev, BCM5222_CTRL);
-	printk(KERN_INFO "%s BCM5222_CTRL %x\n",
-		__func__, ret);
-	/* set the auto-negotiation advertisement register */
-	phy_write(phydev, BCM5222_AN_ADV, BCM5222_AN_ADV_ALL);
-	ret = phy_read(phydev, BCM5222_AN_ADV);
-	printk(KERN_INFO "%s BCM5222_AN_ADV %x, BCM5222_AN_ADV_ALL %x\n",
-		__func__, ret, BCM5222_AN_ADV_ALL);
-	/* enable */
-	phy_write(phydev, BCM5222_CTRL, BCM5222_CTRL_AUTOEN);
-	ret = phy_read(phydev, BCM5222_CTRL);
-	printk(KERN_INFO "%s BCM5222_CTRL %x\n",
-			__func__, ret);
-	printk(KERN_INFO "** wait for complete\n");
-
-	/* read aux status reg */
-	ret = phy_read(phydev, BCM5222_AUX_STATUS);
-	/* Wait for the auto-negotiation completion */
-	timeout = BCM5222_TIMEOUT;
-	while (!(ret & BCM5222_AUX_STATUS_AN_COMP)) {
-		if (!timeout--) {
-			flag = 0;
-			printk(KERN_INFO "BCM5222: TIMEOUT\n");
-			break;
-		}
-
-		mdelay(10);
-		/* Read PHY status register */
-		ret = phy_read(phydev, BCM5222_AUX_STATUS);
-	}
-
-	ret = phy_read(phydev, BCM5222_AUX_STATUS);
-	ret = phy_read(phydev, BCM5222_AN_ADV);
-	return 0;
-}
-
-static int bcm5222_read_status(struct phy_device *phydev)
-{
-	int ret;
-	ret = phy_read(phydev, BCM5222_AUX_STATUS);
-	printk(KERN_INFO "%s ret %x\n", __func__, ret);
-
-	if (ret & BCM5222_AUX_STATUS_LINK)
-		phydev->link = 1;
-	else
-		phydev->link = 0;
-
-	if (ret & BCM5222_AUX_STATUS_SPEED)
-		phydev->speed = SPEED_100;
-	else
-		phydev->speed = SPEED_10;
-
-	ret = phy_read(phydev, BCM5222_AUX_CS);
-	printk(KERN_INFO "%s ret %x\n", __func__, ret);
-	if (ret & BCM5222_AUX_CS_DUPLEX)
-		phydev->duplex = DUPLEX_FULL;
-	else
-		phydev->duplex = DUPLEX_HALF;
-	return 0;
-}
-
-static int bcm5222_config_aneg(struct phy_device *phydev)
-{
-	phy_read(phydev, BCM5222_AUX_STATUS);
-	phy_read(phydev, BCM5222_AN_ADV);
-	return 0;
-}
-
-static struct phy_driver bcm5222_driver = {
-	.phy_id = BCM5222_PHY_ID,
-	.phy_id_mask = 0xfffffff0,
-	.name = "Broadcom BCM5222",
-	.features = PHY_BASIC_FEATURES,
-	.flags = PHY_HAS_INTERRUPT,
-	.config_init = bcm5222_config_init,
-	.config_aneg = genphy_config_aneg,
-	.read_status = genphy_read_status,
-	.ack_interrupt = bcm5222_ack_interrupt,
-	.config_intr = bcm5222_config_intr,
-	.driver = {.owner = THIS_MODULE,}
-};
-
-static int __init bcm5222_init(void)
-{
-	int ret;
-
-	ret = phy_driver_register(&bcm5222_driver);
-	if (ret)
-		goto err1;
-
-	return 0;
-err1:
-	printk(KERN_INFO "register bcm5222 PHY driver fail\n");
-	return ret;
-}
-
-static void __exit bcm5222_exit(void)
-{
-	phy_driver_unregister(&bcm5222_driver);
-}
-
-MODULE_DESCRIPTION("Broadcom PHY driver");
-MODULE_LICENSE("GPL v2");
-
-module_init(bcm5222_init);
-module_exit(bcm5222_exit);