diff options
author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2012-04-21 16:42:05 +0000 |
---|---|---|
committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2012-04-21 16:42:05 +0000 |
commit | d71e7bf38e5008e69b189970ff305f4c7fdc6c76 (patch) | |
tree | dd7e89527ff26840b7258151363f1130b95273c6 /target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch | |
parent | 7665f62dad0e34b18bb227aa478b3ba4abcd3af3 (diff) |
cns3xxx: remove 2.6.31 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31418 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch')
-rw-r--r-- | target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch | 1071 |
1 files changed, 0 insertions, 1071 deletions
diff --git a/target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch b/target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch deleted file mode 100644 index 5556010b0..000000000 --- a/target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch +++ /dev/null @@ -1,1071 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -236,6 +236,39 @@ config SPI_XILINX - See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" - Product Specification document (DS464) for hardware details. - -+config SPI_CNS3XXX -+ tristate "CNS3XXX SPI controller" -+ depends on ARCH_CNS3XXX && SPI_MASTER && EXPERIMENTAL -+ select SPI_BITBANG -+ help -+ This enables using the CNS3XXX SPI controller in master -+ mode. -+ -+config SPI_CNS3XXX_DEBUG -+ boolean "Debug support for CNS3XXX SPI drivers" -+ depends on SPI_CNS3XXX -+ help -+ Say "yes" to enable debug messaging -+ -+config SPI_CNS3XXX_2IOREAD -+ bool "CNS3XXX SPI 2 IO Read Mode" -+ depends on SPI_CNS3XXX -+ help -+ This enables 2 IO Read Mode -+ -+config SPI_CNS3XXX_USEDMA -+ bool "CNS3XXX SPI DMA Mode" -+ depends on SPI_CNS3XXX -+ select CNS3XXX_DMAC -+ help -+ This enables DMA Mode -+ -+config SPI_CNS3XXX_USEDMA_DEBUG -+ boolean "Debug support for CNS3XXX SPI DMA drivers" -+ depends on SPI_CNS3XXX_USEDMA -+ help -+ Say "yes" to enable debug messaging -+ - # - # Add new SPI master controllers in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x - obj-$(CONFIG_SPI_TXX9) += spi_txx9.o - obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o - obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o -+obj-$(CONFIG_SPI_CNS3XXX) += spi_cns3xxx.o - # ... add above this line ... - - # SPI protocol drivers (device/link on bus) ---- a/drivers/spi/spi_bitbang.c -+++ b/drivers/spi/spi_bitbang.c -@@ -334,6 +334,14 @@ static void bitbang_work(struct work_str - */ - if (!m->is_dma_mapped) - t->rx_dma = t->tx_dma = 0; -+ -+#ifdef CONFIG_ARCH_CNS3XXX -+ if (t->transfer_list.next == &m->transfers) { -+ t->last_in_message_list = 1; -+ } else { -+ t->last_in_message_list = 0; -+ } -+#endif - status = bitbang->txrx_bufs(spi, t); - } - if (status > 0) ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -769,6 +769,89 @@ int spi_write_then_read(struct spi_devic - } - EXPORT_SYMBOL_GPL(spi_write_then_read); - -+#ifdef CONFIG_ARCH_CNS3XXX -+/** -+ * spi_write_read_sync - SPI synchronous write & read -+ * @spi: device with which data will be exchanged -+ * @txbuf: data to be written (need not be dma-safe) -+ * @n_tx: size of txbuf, in bytes -+ * @rxbuf: buffer into which data will be read -+ * @n_rx: size of rxbuf, in bytes (need not be dma-safe) -+ * -+ * This performs a half duplex MicroWire style transaction with the -+ * device, sending txbuf and then reading rxbuf. The return value -+ * is zero for success, else a negative errno status code. -+ * This call may only be used from a context that may sleep. -+ * -+ * Parameters to this routine are always copied using a small buffer; -+ * performance-sensitive or bulk transfer code should instead use -+ * spi_{async,sync}() calls with dma-safe buffers. -+ */ -+int spi_write_read_sync(struct spi_device *spi, -+ const u8 *txbuf, unsigned n_tx, -+ u8 *rxbuf, unsigned n_rx) -+{ -+ static DECLARE_MUTEX(lock); -+ -+ int status; -+ struct spi_message message; -+ struct spi_transfer x; -+ u8 *local_buf; -+ -+ /* Use preallocated DMA-safe buffer. We can't avoid copying here, -+ * (as a pure convenience thing), but we can keep heap costs -+ * out of the hot path ... -+ */ -+#if 0 -+ while (!str8131_spi_bus_idle()){ -+ printk("spi bus is not idle \n"); // do nothing -+ } -+ while (!str8131_spi_tx_buffer_empty()){ -+ printk("spi tx buffer is not empty \n"); // do nothing -+ } -+#endif -+ if ((n_tx + n_rx) > SPI_BUFSIZ) -+ return -EINVAL; -+ spi_message_init(&message); -+ memset(&x, 0, sizeof x); -+ x.len = n_tx; -+ spi_message_add_tail(&x, &message); -+ -+ /* ... unless someone else is using the pre-allocated buffer */ -+ if (down_trylock(&lock)) { -+ local_buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL); -+ if (!local_buf) -+ return -ENOMEM; -+ } else -+ local_buf = buf; -+ -+ memcpy(local_buf, txbuf, n_tx); -+ x.tx_buf = local_buf; -+ x.rx_buf = local_buf + n_tx; -+ -+ /* do the i/o */ -+ status = spi_sync(spi, &message); -+ if (status == 0) { -+ memcpy(rxbuf, x.rx_buf, n_rx); -+ status = message.status; -+ } -+ -+ if (x.tx_buf == buf) -+ up(&lock); -+ else -+ kfree(local_buf); -+ -+ return status; -+} -+ -+EXPORT_SYMBOL_GPL(spi_write_read_sync); -+#endif /* CONFIG_ARCH_CNS3XXX */ -+ -+ -+ -+ -+ -+ - /*-------------------------------------------------------------------------*/ - - static int __init spi_init(void) ---- /dev/null -+++ b/drivers/spi/spi_cns3xxx.c -@@ -0,0 +1,878 @@ -+/******************************************************************************* -+ * -+ * CNS3XXX SPI controller driver (master mode only) -+ * -+ * Copyright (c) 2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or -+ * visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ * -+ ******************************************************************************/ -+ -+#include <linux/init.h> -+#include <linux/spinlock.h> -+#include <linux/workqueue.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <linux/errno.h> -+#include <linux/err.h> -+#include <linux/clk.h> -+#include <linux/platform_device.h> -+ -+#include <linux/spi/spi.h> -+#include <linux/spi/spi_bitbang.h> -+#include <linux/mtd/partitions.h> -+#include <linux/dma-mapping.h> -+ -+#include <asm/io.h> -+#include <asm/memory.h> -+#include <asm/dma.h> -+#include <asm/delay.h> -+#include <mach/board.h> -+#include <mach/dmac.h> -+#include <linux/module.h> -+#include <mach/misc.h> -+#include <mach/gpio.h> -+#include <mach/pm.h> -+ -+#define LE8221_SPI_CS 1 -+#define SI3226_SPI_CS 1 -+ -+#define CNS3XXX_SPI_INTERRUPT -+#undef CNS3XXX_SPI_INTERRUPT /* Interrupt is not supported for D2 and SEN */ -+ -+/* -+ * define access macros -+ */ -+#define SPI_MEM_MAP_VALUE(reg_offset) (*((u32 volatile *)(CNS3XXX_SSP_BASE_VIRT + reg_offset))) -+ -+#define SPI_CONFIGURATION_REG SPI_MEM_MAP_VALUE(0x40) -+#define SPI_SERVICE_STATUS_REG SPI_MEM_MAP_VALUE(0x44) -+#define SPI_BIT_RATE_CONTROL_REG SPI_MEM_MAP_VALUE(0x48) -+#define SPI_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x4C) -+#define SPI_TRANSMIT_BUFFER_REG SPI_MEM_MAP_VALUE(0x50) -+#define SPI_RECEIVE_CONTROL_REG SPI_MEM_MAP_VALUE(0x54) -+#define SPI_RECEIVE_BUFFER_REG SPI_MEM_MAP_VALUE(0x58) -+#define SPI_FIFO_TRANSMIT_CONFIG_REG SPI_MEM_MAP_VALUE(0x5C) -+#define SPI_FIFO_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x60) -+#define SPI_FIFO_RECEIVE_CONFIG_REG SPI_MEM_MAP_VALUE(0x64) -+#define SPI_INTERRUPT_STATUS_REG SPI_MEM_MAP_VALUE(0x68) -+#define SPI_INTERRUPT_ENABLE_REG SPI_MEM_MAP_VALUE(0x6C) -+ -+#define SPI_TRANSMIT_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x50) -+#define SPI_RECEIVE_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x58) -+ -+/* Structure for SPI controller of CNS3XXX SOCs */ -+struct cns3xxx_spi { -+ /* bitbang has to be first */ -+ struct spi_bitbang bitbang; -+ struct completion done; -+ wait_queue_head_t wait; -+ -+ int len; -+ int count; -+ int last_in_message_list; -+ -+ /* data buffers */ -+ const unsigned char *tx; -+ unsigned char *rx; -+ -+ struct spi_master *master; -+ struct platform_device *pdev; -+ struct device *dev; -+}; -+ -+static inline u8 cns3xxx_spi_bus_idle(void) -+{ -+ return ((SPI_SERVICE_STATUS_REG & 0x1) ? 0 : 1); -+} -+ -+static inline u8 cns3xxx_spi_tx_buffer_empty(void) -+{ -+ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 3)) ? 1 : 0); -+} -+ -+static inline u8 cns3xxx_spi_rx_buffer_full(void) -+{ -+ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 2)) ? 1 : 0); -+} -+ -+u8 cns3xxx_spi_tx_rx(u8 tx_channel, u8 tx_eof, u32 tx_data, -+ u32 * rx_data) -+{ -+ u8 rx_channel; -+ u8 rx_eof; -+ -+ while (!cns3xxx_spi_bus_idle()) ; // do nothing -+ -+ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing -+ -+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7); -+ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2); -+ -+ SPI_TRANSMIT_BUFFER_REG = tx_data; -+ -+ while (!cns3xxx_spi_rx_buffer_full()) ; // do nothing -+ -+ rx_channel = SPI_RECEIVE_CONTROL_REG & 0x3; -+ rx_eof = (SPI_RECEIVE_CONTROL_REG & (0x1 << 2)) ? 1 : 0; -+ -+ *rx_data = SPI_RECEIVE_BUFFER_REG; -+ -+ if ((tx_channel != rx_channel) || (tx_eof != rx_eof)) { -+ return 0; -+ } else { -+ return 1; -+ } -+} -+ -+u8 cns3xxx_spi_tx(u8 tx_channel, u8 tx_eof, u32 tx_data) -+{ -+ -+ while (!cns3xxx_spi_bus_idle()) ; // do nothing -+ -+ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing -+ -+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7); -+ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2); -+ -+ SPI_TRANSMIT_BUFFER_REG = tx_data; -+ -+ return 1; -+} -+ -+ -+ -+#ifdef CONFIG_SPI_CNS3XXX_DEBUG -+static void spi_slave_probe(void) -+{ -+ int i; -+ u32 rx_data1, rx_data2, rx_data3; -+ -+ cns3xxx_spi_tx_rx(0, 0, 0x9f, &rx_data1); -+ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data1); -+ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data2); -+ cns3xxx_spi_tx_rx(0, 1, 0xff, &rx_data3); -+ printk("[SPI_CNS3XXX_DEBUG] manufacturer: %x\n", rx_data1); -+ printk("[SPI_CNS3XXX_DEBUG] device: %x\n", -+ ((rx_data2 & 0xff) << 8) | (u16) (rx_data3 & 0xff)); -+ -+ cns3xxx_spi_tx_rx(0, 0, 0x03, &rx_data1); -+ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1); -+ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1); -+ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1); -+ for (i = 0; i < 15; i++) { -+ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data1); -+ printk("[SPI_CNS3XXX_DEBUG] flash[%02d]:0x%02x\n", i, -+ rx_data1 & 0xff); -+ } -+ cns3xxx_spi_tx_rx(0, 1, 0xff, &rx_data1); -+ printk("[SPI_CNS3XXX_DEBUG] flash[%02d]:0x%02x\n", i, rx_data1 & 0xff); -+} -+#else -+#define spi_slave_probe() do{}while(0) -+#endif -+ -+static inline struct cns3xxx_spi *to_hw(struct spi_device *sdev) -+{ -+ return spi_master_get_devdata(sdev->master); -+} -+ -+static int cns3xxx_spi_setup_transfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ return 0; -+} -+ -+static void cns3xxx_spi_chipselect(struct spi_device *spi, int value) -+{ -+ unsigned int spi_config; -+ -+ switch (value) { -+ case BITBANG_CS_INACTIVE: -+ break; -+ -+ case BITBANG_CS_ACTIVE: -+ spi_config = SPI_CONFIGURATION_REG; -+ -+ if (spi->mode & SPI_CPHA) -+ spi_config |= (0x1 << 13); -+ else -+ spi_config &= ~(0x1 << 13); -+ -+ if (spi->mode & SPI_CPOL) -+ spi_config |= (0x1 << 14); -+ else -+ spi_config &= ~(0x1 << 14); -+ -+ /* write new configration */ -+ SPI_CONFIGURATION_REG = spi_config; -+ -+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7); -+ SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3); -+ -+#if defined(CONFIG_LE8221_CONTROL) -+ if (spi->chip_select == LE8221_SPI_CS) { -+ SPI_CONFIGURATION_REG |= (0x1 << 9); -+ } -+#elif defined (CONFIG_SI3226_CONTROL_API) -+ if (spi->chip_select == SI3226_SPI_CS) { -+ SPI_CONFIGURATION_REG &= ~(0x1 << 9); -+ } -+#endif -+ break; -+ } -+} -+ -+static int cns3xxx_spi_setup(struct spi_device *spi) -+{ -+ if (!spi->bits_per_word) -+ spi->bits_per_word = 8; -+ -+ return 0; -+} -+ -+#ifdef CONFIG_SPI_CNS3XXX_USEDMA -+ -+int cns3xxx_spi_dma_irq_handler(void *pdata) -+{ -+ -+ struct cns3xxx_spi *hw = pdata; -+ complete(&hw->done); -+ -+ return 0; -+} -+ -+static int cns3xxx_spi_dma_initialize(int *rxchan, int *txchan, int *rxevtno, -+ int *txevtno, void *handlerargs) -+{ -+ *rxchan = dmac_get_channel(cns3xxx_spi_dma_irq_handler, handlerargs); -+ if ((*rxchan) == -1) -+ goto fail1; -+ *txchan = dmac_get_channel(NULL, NULL); -+ if ((*txchan) == -1) -+ goto fail2; -+ *rxevtno = 9; -+ if (dmac_get_event(*rxchan, *rxevtno) == -1) -+ goto fail3; -+ *txevtno = 10; -+ if (dmac_get_event(*txchan, *txevtno) == -1) -+ goto fail4; -+ return 0; -+ -+fail4: -+ dmac_release_event(*rxchan, *rxevtno); -+fail3: -+ dmac_release_channel(*txchan); -+fail2: -+ dmac_release_channel(*rxchan); -+fail1: -+ return -1; -+} -+ -+static int cns3xxx_spi_start_dma(int rch, int tch, int rev, int tev, -+ struct spi_transfer *t, struct cns3xxx_spi *hw) -+{ -+ static void *dummy; -+ static dma_addr_t dummy_dma; -+ dma_addr_t rdma, tdma; -+ int rx_inc, tx_inc; -+ int lc0, totlps, lc1, rump; -+ u32 rx_data; -+ -+ if (!dummy) { -+ dummy = dma_alloc_coherent(NULL, 16, &dummy_dma, GFP_KERNEL); -+#ifdef CONFIG_SPI_CNS3XXX_DEBUG_DMA -+ printk("Allocated Memory for dummy buffer va:%p,pa:%x\n", dummy, -+ dummy_dma); -+#endif -+ } -+ if (!dummy) { -+ return -1; -+ } -+ *((uint32_t *) dummy) = 0xffffffff; -+ -+ (t->tx_buf) ? (tdma = t->tx_dma, tx_inc = 1) : -+ (tdma = dummy_dma, tx_inc = 0); -+ (t->rx_buf) ? (rdma = t->rx_dma, rx_inc = 1) : -+ (rdma = dummy_dma, rx_inc = 0); -+ -+#ifdef CONFIG_SPI_CNS3XXX_DEBUG_DMA -+ printk("Here with tdma %x, rdma %x\n", tdma, rdma); -+#endif -+ -+ if(t->len < 3) { -+ if(t->len == 2){ -+ cns3xxx_spi_tx_rx(0,0,(t->tx_buf) ? hw->tx[0] : 0xff ,&rx_data); -+ if(!(t->tx_buf)) -+ hw->rx[0] = rx_data & 0xff; -+ } -+ cns3xxx_spi_dma_irq_handler(hw); -+ return 0; -+ } -+ -+ -+ totlps = t->len - 1 -1; -+ if (totlps > 0x100) { -+ lc0 = 0x100; -+ lc1 = totlps / lc0; -+ rump = totlps % lc0; -+ } else { -+ lc0 = totlps; -+ lc1 = 0; -+ rump = 0; -+ } -+ -+ if(t->tx_buf) { -+ cns3xxx_spi_tx(0,0,*((uint32_t *) t->tx_buf)); -+ tdma+=1; -+ } -+ else { -+ cns3xxx_spi_tx(0,0,0xff); -+ } -+ -+ //SPI_RECEIVE_BUFFER_REG; -+ { -+ DMAC_DMAMOV(tch, SAR, tdma); -+ DMAC_DMAMOV(tch, DAR, SPI_TRANSMIT_BUFFER_REG_ADDR); -+ DMAC_DMAMOV(tch, CCR, -+ dmac_create_ctrlval(tx_inc, 1, 1, 0, 1, 1, 0)); -+ //DMAC_WFE(tch, rev); -+ if (lc1) -+ DMAC_DMALP(tch, 1, lc1); -+ DMAC_DMALP(tch, 0, lc0); -+ DMAC_WFE(tch, rev); -+ DMAC_DMALDS(tch); -+ DMAC_DMASTS(tch); -+ DMAC_DMAWMB(tch); -+ DMAC_DMASEV(tch, tev); -+ DMAC_DMALPEND(tch, 0, -+ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE + -+ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE + -+ DMALD_INSTR_SIZE, 1); -+ if (lc1) -+ DMAC_DMALPEND(tch, 1, -+ DMALP_INSTR_SIZE + DMALPEND_INSTR_SIZE + -+ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE + -+ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE + -+ DMALD_INSTR_SIZE, 1); -+ -+ if (rump) { -+ DMAC_DMALP(tch, 0, rump); -+ DMAC_WFE(tch, rev); -+ DMAC_DMALDS(tch); -+ DMAC_DMASTS(tch); -+ DMAC_DMAWMB(tch); -+ DMAC_DMASEV(tch, tev); -+ DMAC_DMALPEND(tch, 0, -+ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE + -+ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE + -+ DMALD_INSTR_SIZE, 1); -+ } -+ -+ -+ DMAC_DMAEND(tch); -+ DMAC_DMAGO(tch); -+ } -+ { -+ DMAC_DMAMOV(rch, SAR, SPI_RECEIVE_BUFFER_REG_ADDR); -+ DMAC_DMAMOV(rch, DAR, rdma); -+ DMAC_DMAMOV(rch, CCR, -+ dmac_create_ctrlval(0, 1, 1, rx_inc, 1, 1, 0)); -+ -+ if (lc1) -+ DMAC_DMALP(rch, 1, lc1); -+ DMAC_DMALP(rch, 0, lc0); -+ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL); -+ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0); -+ DMAC_DMASTS(rch); -+ DMAC_DMAWMB(rch); -+ DMAC_DMASEV(rch, rev); -+ DMAC_WFE(rch, tev); -+ DMAC_DMALPEND(rch, 0, -+ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE + -+ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE + -+ DMALDP_INSTR_SIZE + DMAWFP_INSTR_SIZE, 1); -+ if (lc1) -+ DMAC_DMALPEND(rch, 1, -+ DMAWFE_INSTR_SIZE + -+ DMASEV_INSTR_SIZE + DMAWMB_INSTR_SIZE + -+ DMAST_INSTR_SIZE + DMALDP_INSTR_SIZE + -+ DMAWFP_INSTR_SIZE + DMALP_INSTR_SIZE + -+ DMALPEND_INSTR_SIZE, 1); -+ -+ -+ if (rump) { -+ DMAC_DMALP(rch, 0, rump); -+ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL); -+ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0); -+ DMAC_DMASTS(rch); -+ DMAC_DMAWMB(rch); -+ DMAC_DMASEV(rch, rev); -+ DMAC_WFE(rch, tev); -+ DMAC_DMALPEND(rch, 0, -+ DMAWFE_INSTR_SIZE + -+ DMASEV_INSTR_SIZE + DMAWMB_INSTR_SIZE + -+ DMAST_INSTR_SIZE + DMALDP_INSTR_SIZE + -+ DMAWFP_INSTR_SIZE, 1); -+ } -+ // extra RX -+ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL); -+ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0); -+ DMAC_DMASTS(rch); -+ DMAC_DMAWMB(rch); -+ -+ DMAC_DMAFLUSHP(rch, DMAC_SPI_PERIPH_ID); -+ DMAC_DMASEV(rch, rch); // This will generate an interrupt -+ DMAC_DMAEND(rch); -+ DMAC_DMAGO(rch); -+ } -+ return 0; -+} -+ -+static void cns3xxx_spi_dma_uninitialize(int rch, int tch, int revt, int tevt) -+{ -+ dmac_release_event(rch, revt); -+ dmac_release_event(tch, tevt); -+ dmac_release_channel(rch); -+ dmac_release_channel(tch); -+ return; -+} -+ -+#endif /* CONFIG_SPI_CNS3XXX_USEDMA */ -+ -+static int cns3xxx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct cns3xxx_spi *hw = to_hw(spi); -+#ifdef CONFIG_SPI_CNS3XXX_USEDMA -+ int spi_rxchan, spi_txchan, spi_rxevt, spi_txevt; -+ int rx_data; -+#endif -+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf, -+ t->len); -+ -+ hw->tx = t->tx_buf; -+ hw->rx = t->rx_buf; -+ hw->len = t->len; -+ hw->count = 0; -+ hw->last_in_message_list = t->last_in_message_list; -+ -+#ifdef CONFIG_SPI_CNS3XXX_USEDMA -+ init_completion(&hw->done); -+ -+ if (cns3xxx_spi_dma_initialize -+ (&spi_rxchan, &spi_txchan, &spi_rxevt, &spi_txevt, hw)) { -+ dev_dbg(&spi->dev, "%s:%d Could not initialize DMA. \n", -+ __FUNCTION__, __LINE__); -+ return 0; -+ } -+ -+ if (t->tx_buf) -+ t->tx_dma = -+ dma_map_single(NULL, t->tx_buf, t->len, DMA_TO_DEVICE); -+ if (t->rx_buf) -+ t->rx_dma = -+ dma_map_single(NULL, t->rx_buf, t->len, DMA_FROM_DEVICE); -+ -+ if (cns3xxx_spi_start_dma -+ (spi_rxchan, spi_txchan, spi_rxevt, spi_txevt, t, hw)) { -+ dev_dbg(&spi->dev, "Could not start DMA. \n"); -+ if (t->tx_buf) -+ dma_unmap_single(NULL, t->tx_dma, t->len, -+ DMA_TO_DEVICE); -+ t->tx_dma = 0; -+ if (t->rx_buf) -+ dma_unmap_single(NULL, t->rx_dma, t->len, -+ DMA_FROM_DEVICE); -+ t->rx_dma = 0; -+ cns3xxx_spi_dma_uninitialize(spi_rxchan, spi_txchan, spi_rxevt, -+ spi_txevt); -+ return 0; -+ } -+ -+ wait_for_completion(&hw->done); -+ -+ dev_dbg(&spi->dev, "DMA reported completion of transfer of %d bytes\n", -+ t->len - 1); -+ -+ if (t->tx_buf) -+ dma_unmap_single(NULL, t->tx_dma, t->len, DMA_TO_DEVICE); -+ t->tx_dma = 0; -+ if (t->rx_buf) -+ dma_unmap_single(NULL, t->rx_dma, t->len, DMA_FROM_DEVICE); -+ t->rx_dma = 0; -+ cns3xxx_spi_dma_uninitialize(spi_rxchan, spi_txchan, spi_rxevt, -+ spi_txevt); -+ -+ if (t->last_in_message_list) -+ cns3xxx_spi_tx_rx(spi->chip_select, 1, -+ (hw->tx) ? hw->tx[hw->len - 1] : 0xff, -+ &rx_data); -+ else -+ cns3xxx_spi_tx_rx(spi->chip_select, 0, -+ (hw->tx) ? hw->tx[hw->len - 1] : 0xff, -+ &rx_data); -+ -+ if (hw->rx) -+ hw->rx[hw->len - 1] = rx_data & 0xff; -+ -+ return hw->len; -+ -+#else /* !CONFIG_SPI_CNS3XXX_USEDMA */ -+ -+#ifdef CNS3XXX_SPI_INTERRUPT -+ -+ init_completion(&hw->done); -+ -+ /* Effectively, we are enabling only the Receive Buffer Interrupt Enable */ -+ /* TX Buf Underrun and RX Buf Overrun are not to happen */ -+ SPI_INTERRUPT_ENABLE_REG = (0x1 << 2); -+// (0x0) | (0x1 << 2) | (0x0 << 3) | (0x1 << 6) | (0x1 << 7); -+ -+ /* Write data and wait for completion */ -+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7); -+ SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3) | -+ ((((hw->last_in_message_list) && (hw->len == 1)) ? 0x1 : 0x0) << 2); -+ -+ SPI_TRANSMIT_BUFFER_REG = (hw->tx) ? hw->tx[hw->count] : 0xff; -+ -+ wait_for_completion(&hw->done); -+ -+ SPI_INTERRUPT_ENABLE_REG = 0; -+ -+ return hw->count; -+ -+#else /* !CNS3XXX_SPI_INTERRUPT */ -+ -+ init_completion(&hw->done); -+ -+ if (hw->tx) { -+ int i; -+ u32 rx_data; -+ for (i = 0; i < (hw->len - 1); i++) { -+ dev_dbg(&spi->dev, -+ "[SPI_CNS3XXX_DEBUG] hw->tx[%02d]: 0x%02x\n", i, -+ hw->tx[i]); -+ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i], -+ &rx_data); -+ if (hw->rx) { -+ hw->rx[i] = rx_data; -+ dev_dbg(&spi->dev, -+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", -+ i, hw->rx[i]); -+ } -+ } -+ -+ if (t->last_in_message_list) { -+ cns3xxx_spi_tx_rx(spi->chip_select, 1, hw->tx[i], -+ &rx_data); -+ if (hw->rx) { -+ hw->rx[i] = rx_data; -+ dev_dbg(&spi->dev, -+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", -+ i, hw->rx[i]); -+ } -+ } else { -+ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i], -+ &rx_data); -+ } -+ goto done; -+ } -+ -+ if (hw->rx) { -+ int i; -+ u32 rx_data; -+ for (i = 0; i < (hw->len - 1); i++) { -+ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data); -+ hw->rx[i] = rx_data; -+ dev_dbg(&spi->dev, -+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", i, -+ hw->rx[i]); -+ } -+ -+ if (t->last_in_message_list) { -+ cns3xxx_spi_tx_rx(spi->chip_select, 1, 0xff, &rx_data); -+ } else { -+ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data); -+ } -+ hw->rx[i] = rx_data; -+ dev_dbg(&spi->dev, "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", -+ i, hw->rx[i]); -+ } -+done: -+ return hw->len; -+ -+#endif /* CNS3XXX_SPI_INTERRUPT */ -+ -+#endif /* CONFIG_SPI_CNS3XXX_USEDMA */ -+} -+ -+#ifdef CNS3XXX_SPI_INTERRUPT -+/* Driver supports single master only. -+ * We have disabled fifo, so we wait for the receive buff full interrupt. -+ * Receive Buff overrun, transmit buff underrun are not to happen -+ */ -+static irqreturn_t cns3xxx_spi_irq(int irq, void *dev) -+{ -+ struct cns3xxx_spi *hw = dev; -+ uint32_t int_status; -+ uint8_t data; -+ unsigned int count = hw->count; -+ -+ /* Read the interrupt status and clear interrupt */ -+ int_status = SPI_INTERRUPT_STATUS_REG; -+ -+ if (!(int_status & (0x1 << 2))) { -+ printk("DEBUG THIS ! Unexpected interrupt (status = 0x%x)", int_status); -+ /* Clearing spurious interrupts */ -+ SPI_INTERRUPT_STATUS_REG = (0xF << 4); -+ goto irq_done; -+ } -+ -+ /* Read to clear */ -+ data = SPI_RECEIVE_BUFFER_REG & 0xff; -+ -+ if (hw->rx) -+ hw->rx[hw->count] = data; -+ -+ hw->count++; -+ hw->len--; -+ -+ if (hw->len) { -+ SPI_TRANSMIT_CONTROL_REG |= -+ ((((hw->last_in_message_list) && (hw->len == 1)) ? 0x1 : 0x0) << 2); -+ SPI_TRANSMIT_BUFFER_REG = (hw->tx) ? hw->tx[hw->count] : 0xff; -+ } else { -+ complete(&hw->done); -+ } -+ -+irq_done: -+ return IRQ_HANDLED; -+} -+#endif -+ -+static void __init cns3xxx_spi_initial(void) -+{ -+ -+ /* share pin config. */ -+#if 1 -+#if 0 -+ /* GPIOB18 is set to PCM by default */ -+ MISC_GPIOB_PIN_ENABLE_REG &= ~(MISC_GSW_P0_CRS_PIN); -+ gpio_direction_output(50, 1); -+#endif -+ PM_PLL_HM_PD_CTRL_REG &= ~(0x1 << 5); -+ HAL_MISC_ENABLE_SPI_PINS(); -+ HAL_MISC_ENABLE_PCM_PINS(); /* this just for PCM test */ -+ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SPI_PCM_I2C)); -+ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SPI_PCM_I2C)); -+#endif -+ -+ SPI_CONFIGURATION_REG = (((0x0 & 0x3) << 0) | /* 8bits shift length */ -+ (0x0 << 9) | /* SPI mode */ -+ (0x0 << 10) | /* disable FIFO */ -+ (0x1 << 11) | /* SPI master mode */ -+ (0x0 << 12) | /* disable SPI loopback mode */ -+ (0x1 << 13) | /* clock phase */ -+ (0x1 << 14) | /* clock polarity */ -+ (0x0 << 24) | /* disable - SPI data swap */ -+#ifdef CONFIG_SPI_CNS3XXX_2IOREAD -+ (0x1 << 29) | /* enable - 2IO Read mode */ -+#else -+ (0x0 << 29) | /* disablea - 2IO Read mode */ -+#endif -+ (0x0 << 30) | /* disable - SPI high speed read for system boot up */ -+ (0x0 << 31)); /* disable - SPI */ -+ -+ /* Set SPI bit rate PCLK/2 */ -+ SPI_BIT_RATE_CONTROL_REG = 0x1; -+ -+ /* Set SPI Tx channel 0 */ -+ SPI_TRANSMIT_CONTROL_REG = 0x0; -+ -+ /* Set Tx FIFO Threshold, Tx FIFO has 2 words */ -+ SPI_FIFO_TRANSMIT_CONFIG_REG &= ~(0x03 << 4); -+ SPI_FIFO_TRANSMIT_CONFIG_REG |= ((0x0 & 0x03) << 4); -+ -+ /* Set Rx FIFO Threshold, Rx FIFO has 2 words */ -+ SPI_FIFO_RECEIVE_CONFIG_REG &= ~(0x03 << 4); -+ SPI_FIFO_RECEIVE_CONFIG_REG |= ((0x0 & 0x03) << 4); -+ -+ /* Disable all interrupt */ -+ SPI_INTERRUPT_ENABLE_REG = 0x0; -+ -+ /* Clear spurious interrupt sources */ -+ SPI_INTERRUPT_STATUS_REG = (0x0F << 4); -+ -+ /* Enable SPI */ -+ SPI_CONFIGURATION_REG |= (0x1 << 31); -+ -+ return; -+} -+ -+static int __init cns3xxx_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct cns3xxx_spi *hw; -+ int err = 0; -+ -+ printk("%s: setup CNS3XXX SPI Controller", __FUNCTION__); -+#ifdef CONFIG_SPI_CNS3XXX_USEDMA -+ printk(" w/ DMA \n"); -+#else -+#ifdef CNS3XXX_SPI_INTERRUPT -+ printk(" in Interrupt mode, w/o DMA \n"); -+#else -+ printk(" in polling mode, w/o DMA \n"); -+#endif -+#endif -+ -+ /* share pin config. */ -+// HAL_MISC_ENABLE_SPI_PINS(); -+ -+ /* Allocate master with space for cns3xxx_spi */ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct cns3xxx_spi)); -+ if (master == NULL) { -+ dev_err(&pdev->dev, "No memory for spi_master\n"); -+ err = -ENOMEM; -+ goto err_nomem; -+ } -+ -+ hw = spi_master_get_devdata(master); -+ memset(hw, 0, sizeof(struct cns3xxx_spi)); -+ -+ hw->master = spi_master_get(master); -+ hw->dev = &pdev->dev; -+ -+ platform_set_drvdata(pdev, hw); -+ init_completion(&hw->done); -+ -+ /* setup the master state. */ -+ -+ master->num_chipselect = 4; -+ master->bus_num = 1; -+ -+ /* setup the state for the bitbang driver */ -+ -+ hw->bitbang.master = hw->master; -+ hw->bitbang.setup_transfer = cns3xxx_spi_setup_transfer; -+ hw->bitbang.chipselect = cns3xxx_spi_chipselect; -+ hw->bitbang.txrx_bufs = cns3xxx_spi_txrx; -+ hw->bitbang.master->setup = cns3xxx_spi_setup; -+ -+ dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang); -+ -+#ifdef CNS3XXX_SPI_INTERRUPT -+ err = request_irq(IRQ_CNS3XXX_SPI, cns3xxx_spi_irq, IRQF_SHARED, "cns3xxx_spi", hw); -+ if (err) { -+ dev_err(&pdev->dev, "Cannot claim IRQ\n"); -+ goto err_no_irq; -+ } -+#endif -+ -+ /* SPI controller initializations */ -+ cns3xxx_spi_initial(); -+ -+ /* register SPI controller */ -+ -+ err = spi_bitbang_start(&hw->bitbang); -+ if (err) { -+ dev_err(&pdev->dev, "Failed to register SPI master\n"); -+ goto err_register; -+ } -+ -+ spi_slave_probe(); -+ -+ return 0; -+ -+err_register: -+#ifdef CNS3XXX_SPI_INTERRUPT -+err_no_irq: -+#endif -+ spi_master_put(hw->master);; -+ -+err_nomem: -+ return err; -+} -+ -+static int __devexit cns3xxx_spi_remove(struct platform_device *dev) -+{ -+ struct cns3xxx_spi *hw = platform_get_drvdata(dev); -+ -+ platform_set_drvdata(dev, NULL); -+ -+ spi_unregister_master(hw->master); -+ -+ //cns3xxx_spi_clk_disable(); -+ -+ spi_master_put(hw->master); -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+static int cns3xxx_spi_suspend(struct platform_device *pdev, pm_message_t msg) -+{ -+ struct cns3xxx_spi *hw = platform_get_drvdata(pdev); -+ -+ //cns3xxx_spi_clk_disable(); -+ return 0; -+} -+ -+static int cns3xxx_spi_resume(struct platform_device *pdev) -+{ -+ struct cns3xxx_spi *hw = platform_get_drvdata(pdev); -+ -+ //cns3xxx_spi_clk_enable() -+ return 0; -+} -+ -+#else -+#define cns3xxx_spi_suspend NULL -+#define cns3xxx_spi_resume NULL -+#endif -+ -+static struct platform_driver cns3xxx_spi_driver = { -+ .probe = cns3xxx_spi_probe, -+ .remove = __devexit_p(cns3xxx_spi_remove), -+ .suspend = cns3xxx_spi_suspend, -+ .resume = cns3xxx_spi_resume, -+ .driver = { -+ .name = "cns3xxx_spi", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init cns3xxx_spi_init(void) -+{ -+ return platform_driver_register(&cns3xxx_spi_driver); -+} -+ -+static void __exit cns3xxx_spi_exit(void) -+{ -+ platform_driver_unregister(&cns3xxx_spi_driver); -+} -+ -+module_init(cns3xxx_spi_init); -+module_exit(cns3xxx_spi_exit); -+ -+MODULE_AUTHOR("Cavium Networks"); -+MODULE_DESCRIPTION("CNS3XXX SPI Controller Driver"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:cns3xxx_spi"); -+ -+EXPORT_SYMBOL_GPL(cns3xxx_spi_tx_rx); ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -424,6 +424,12 @@ struct spi_transfer { - u16 delay_usecs; - u32 speed_hz; - -+#ifdef CONFIG_ARCH_CNS3XXX -+ unsigned last_in_message_list; -+#ifdef CONFIG_SPI_CNS3XXX_2IOREAD -+ u8 dio_read; -+#endif -+#endif - struct list_head transfer_list; - }; - -@@ -627,6 +633,13 @@ spi_read(struct spi_device *spi, u8 *buf - return spi_sync(spi, &m); - } - -+#ifdef CONFIG_ARCH_CNS3XXX -+extern int spi_write_read_sync(struct spi_device *spi, -+ const u8 *txbuf, unsigned n_tx, -+ u8 *rxbuf, unsigned n_rx); -+ -+#endif -+ - /* this copies txbuf and rxbuf data; for small transfers only! */ - extern int spi_write_then_read(struct spi_device *spi, - const u8 *txbuf, unsigned n_tx, |