[brcm63xx] remove support for 3.6 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35506 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 481 deletions

diff --git a/target/linux/brcm63xx/patches-3.6/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch b/target/linux/brcm63xx/patches-3.6/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch
deleted file mode 100644
index 2b213968a..000000000
--- a/target/linux/brcm63xx/patches-3.6/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch
+++ /dev/null
@@ -1,481 +0,0 @@
-From 4b27423676485d05bcd6fc6f3809164fb8f9d22d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 30/60] SPI: MIPS: BCM63XX: Add HSSPI driver
-
-Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h   |    2 +
- drivers/spi/Kconfig                                |    7 +
- drivers/spi/Makefile                               |    1 +
- drivers/spi/spi-bcm63xx-hsspi.c                    |  427 ++++++++++++++++++++
- 4 files changed, 437 insertions(+), 0 deletions(-)
- create mode 100644 drivers/spi/spi-bcm63xx-hsspi.c
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -17,4 +17,6 @@ struct bcm63xx_hsspi_pdata {
- 
- #define HSSPI_PLL_HZ_6328	133333333
- 
-+#define HSSPI_BUFFER_LEN   	512
-+
- #endif /* BCM63XX_DEV_HSSPI_H */
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -100,6 +100,13 @@ config SPI_BCM63XX
- 	help
-           Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
- 
-+config SPI_BCM63XX_HSSPI
-+	tristate "Broadcom BCM63XX HS SPI controller driver"
-+	depends on BCM63XX
-+	help
-+	  This enables support for the High Speed SPI controller present on
-+	  newer Broadcom BCM63XX SoCs.
-+
- config SPI_BITBANG
- 	tristate "Utilities for Bitbanging SPI masters"
- 	help
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
- obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
- obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
- obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
-+obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
- obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
- obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
- obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm63xx-hsspi.c
-@@ -0,0 +1,427 @@
-+/*
-+ * Broadcom BCM63XX High Speed SPI Controller driver
-+ *
-+ * Copyright 2000-2010 Broadcom Corporation
-+ * Copyright 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/workqueue.h>
-+
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_hsspi.h>
-+
-+#define HSSPI_OP_CODE_SHIFT	13
-+#define HSSPI_OP_SLEEP		(0 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ_WRITE	(1 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_WRITE		(2 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ		(3 << HSSPI_OP_CODE_SHIFT)
-+
-+#define HSSPI_MAX_PREPEND_LEN	15
-+
-+#define HSSPI_MAX_SYNC_CLOCK	30000000
-+
-+struct bcm63xx_hsspi {
-+	struct completion	done;
-+	struct spi_transfer	*curr_trans;
-+
-+	struct platform_device  *pdev;
-+	struct clk		*clk;
-+	void __iomem		*regs;
-+	u8 __iomem		*fifo;
-+
-+	u32			speed_hz;
-+	int			irq;
-+};
-+
-+static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, int hz,
-+				  int profile)
-+{
-+	u32 reg;
-+
-+	reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz));
-+	bcm_hsspi_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | reg,
-+			 HSSPI_PROFILE_CLK_CTRL_REG(profile));
-+
-+	reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+	if (hz > HSSPI_MAX_SYNC_CLOCK)
-+		reg |= SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+	else
-+		reg &= ~SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+	bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+}
-+
-+static int bcm63xx_hsspi_do_txrx(struct spi_device *spi,
-+				 struct spi_transfer *t1,
-+				 struct spi_transfer *t2)
-+{
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
-+	u8 chip_select = spi->chip_select;
-+	u16 opcode = 0;
-+	int len, prepend_size = 0;
-+
-+	init_completion(&bs->done);
-+
-+	bs->curr_trans = t2 ? t2 : t1;
-+	bcm63xx_hsspi_set_clk(bs, bs->curr_trans->speed_hz, chip_select);
-+
-+	if (t2 && !t2->tx_buf)
-+		prepend_size = t1->len;
-+
-+	bcm_hsspi_writel(prepend_size << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
-+			 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
-+			 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
-+			 HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
-+
-+	if (t1->rx_buf && t1->tx_buf)
-+		opcode = HSSPI_OP_READ_WRITE;
-+	else if (t1->rx_buf || (t2 && t2->rx_buf))
-+		opcode = HSSPI_OP_READ;
-+	else if (t1->tx_buf)
-+		opcode = HSSPI_OP_WRITE;
-+
-+	if (opcode == HSSPI_OP_READ && t2)
-+		len = t2->len;
-+	else
-+		len = t1->len;
-+
-+	if (t1->tx_buf) {
-+		memcpy_toio(bs->fifo + 2, t1->tx_buf, t1->len);
-+		if (t2 && t2->tx_buf) {
-+			memcpy_toio(bs->fifo + 2 + t1->len,
-+				    t2->tx_buf, t2->len);
-+			len += t2->len;
-+		}
-+	}
-+
-+	opcode |= len;
-+	memcpy_toio(bs->fifo, &opcode, sizeof(opcode));
-+
-+	/* enable interrupt */
-+	bcm_hsspi_writel(HSSPI_PING0_CMD_DONE, HSSPI_INT_MASK_REG);
-+
-+	/* start the transfer */
-+	bcm_hsspi_writel(chip_select << PINGPONG_CMD_SS_SHIFT |
-+			 chip_select << PINGPONG_CMD_PROFILE_SHIFT |
-+			 PINGPONG_COMMAND_START_NOW,
-+			 HSSPI_PINGPONG_COMMAND_REG(0));
-+
-+	if (wait_for_completion_timeout(&bs->done, HZ) == 0) {
-+		dev_err(&bs->pdev->dev, "transfer timed out!\n");
-+		return -ETIMEDOUT;
-+	}
-+
-+	return t1->len + (t2 ? t2->len : 0);
-+}
-+
-+static int bcm63xx_hsspi_setup(struct spi_device *spi)
-+{
-+	u32 reg;
-+
-+	if (spi->bits_per_word != 8)
-+		return -EINVAL;
-+
-+	if (spi->max_speed_hz == 0)
-+		return -EINVAL;
-+
-+	reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+	reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING);
-+	if (spi->mode & SPI_CPHA)
-+		reg |= SIGNAL_CTRL_LAUNCH_RISING;
-+	else
-+		reg |= SIGNAL_CTRL_LATCH_RISING;
-+	bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+
-+	return 0;
-+}
-+
-+static int bcm63xx_hsspi_transfer_one(struct spi_master *master,
-+				      struct spi_message *msg)
-+{
-+	struct spi_transfer *t, *prev = NULL;
-+	struct spi_device *spi = msg->spi;
-+	u32 reg;
-+	int ret = -EINVAL;
-+	int len = 0;
-+
-+	/* check if we are able to make these transfers */
-+	list_for_each_entry(t, &msg->transfers, transfer_list) {
-+		if (!t->tx_buf && !t->rx_buf)
-+			goto out;
-+
-+		if (t->speed_hz == 0)
-+			t->speed_hz = spi->max_speed_hz;
-+
-+		if (t->speed_hz > spi->max_speed_hz)
-+			goto out;
-+
-+		if (t->len > HSSPI_BUFFER_LEN)
-+			goto out;
-+
-+		/*
-+		 * This controller does not support keeping the chip select
-+		 * active between transfers.
-+		 * This logic currently supports combining:
-+		 *  write then read with no cs_change (e.g. m25p80 RDSR)
-+		 *  write then write with no cs_change (e.g. m25p80 PP)
-+		 */
-+		if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
-+			/*
-+			 * reject if we have to combine two tx transfers and
-+			 * their combined length is bigger than the buffer
-+			 */
-+			if (prev->tx_buf && t->tx_buf &&
-+			    (prev->len + t->len) > HSSPI_BUFFER_LEN)
-+				goto out;
-+			/*
-+			 * reject if we need write more than 15 bytes in read
-+			 * then write.
-+			 */
-+			if (prev->tx_buf && t->rx_buf &&
-+			    prev->len > HSSPI_MAX_PREPEND_LEN)
-+				goto out;
-+		}
-+
-+	}
-+
-+	/* setup clock polarity */
-+	reg = bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG);
-+	reg &= ~GLOBAL_CTRL_CLK_POLARITY;
-+	if (spi->mode & SPI_CPOL)
-+		reg |= GLOBAL_CTRL_CLK_POLARITY;
-+	bcm_hsspi_writel(reg, HSSPI_GLOBAL_CTRL_REG);
-+
-+	list_for_each_entry(t, &msg->transfers, transfer_list) {
-+		if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
-+			/* combine write with following transfer */
-+			ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, t);
-+			if (ret < 0)
-+				goto out;
-+
-+			len += ret;
-+			prev = NULL;
-+			continue;
-+		}
-+
-+		/* write the previous pending transfer */
-+		if (prev != NULL) {
-+			ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
-+			if (ret < 0)
-+				goto out;
-+
-+			len += ret;
-+		}
-+
-+		prev = t;
-+	}
-+
-+	/* do last pending transfer */
-+	if (prev != NULL) {
-+		ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
-+		if (ret < 0)
-+			goto out;
-+		len += ret;
-+	}
-+
-+	msg->actual_length = len;
-+	ret = 0;
-+out:
-+	msg->status = ret;
-+	spi_finalize_current_message(master);
-+	return 0;
-+}
-+
-+static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id)
-+{
-+	struct spi_master *master = (struct spi_master *)dev_id;
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+	if (bcm_hsspi_readl(HSSPI_INT_STATUS_MASKED_REG) == 0)
-+		return IRQ_NONE;
-+
-+	bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
-+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+
-+	if (bs->curr_trans && bs->curr_trans->rx_buf)
-+		memcpy_fromio(bs->curr_trans->rx_buf,  bs->fifo,
-+			      bs->curr_trans->len);
-+	complete(&bs->done);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __devinit bcm63xx_hsspi_probe(struct platform_device *pdev)
-+{
-+
-+	struct spi_master *master;
-+	struct bcm63xx_hsspi *bs;
-+	struct resource *res_mem;
-+	void __iomem *regs;
-+	struct device *dev = &pdev->dev;
-+	struct bcm63xx_hsspi_pdata *pdata = pdev->dev.platform_data;
-+	struct clk *clk;
-+	int irq;
-+	int ret;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		dev_err(dev, "no irq\n");
-+		return -ENXIO;
-+	}
-+
-+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	regs = devm_request_and_ioremap(dev, res_mem);
-+	if (!regs) {
-+		dev_err(dev, "unable to ioremap regs\n");
-+		return -ENXIO;
-+	}
-+
-+	clk = clk_get(dev, "hsspi");
-+
-+	if (IS_ERR(clk)) {
-+		ret = PTR_ERR(clk);
-+		goto out_release;
-+	}
-+
-+	clk_prepare_enable(clk);
-+
-+	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
-+	if (!master) {
-+		ret = -ENOMEM;
-+		goto out_disable_clk;
-+	}
-+
-+	bs = spi_master_get_devdata(master);
-+	bs->pdev = pdev;
-+	bs->clk = clk;
-+	bs->regs = regs;
-+
-+	master->bus_num = pdata->bus_num;
-+	master->num_chipselect = 8;
-+	master->setup = bcm63xx_hsspi_setup;
-+	master->transfer_one_message = bcm63xx_hsspi_transfer_one;
-+	master->mode_bits = SPI_CPOL | SPI_CPHA;
-+
-+	bs->speed_hz = pdata->speed_hz;
-+	bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0));
-+
-+	platform_set_drvdata(pdev, master);
-+
-+	bs->curr_trans = NULL;
-+
-+	/* Initialize the hardware */
-+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+
-+	/* clean up any pending interrupts */
-+	bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
-+
-+	bcm_hsspi_writel(bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG) |
-+			 GLOBAL_CTRL_CLK_GATE_SSOFF,
-+			 HSSPI_GLOBAL_CTRL_REG);
-+
-+	ret = devm_request_irq(dev, irq, bcm63xx_hsspi_interrupt, IRQF_SHARED,
-+			       pdev->name, master);
-+
-+	if (ret)
-+		goto out_put_master;
-+
-+	/* register and we are done */
-+	ret = spi_register_master(master);
-+	if (ret)
-+		goto out_free_irq;
-+
-+	return 0;
-+
-+out_free_irq:
-+	devm_free_irq(dev, bs->irq, master);
-+out_put_master:
-+	spi_master_put(master);
-+out_disable_clk:
-+	clk_disable_unprepare(clk);
-+	clk_put(clk);
-+out_release:
-+	devm_ioremap_release(dev, regs);
-+
-+	return ret;
-+}
-+
-+
-+static int __exit bcm63xx_hsspi_remove(struct platform_device *pdev)
-+{
-+	struct spi_master *master = platform_get_drvdata(pdev);
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+	spi_unregister_master(master);
-+
-+	/* reset the hardware and block queue progress */
-+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+	clk_disable_unprepare(bs->clk);
-+	clk_put(bs->clk);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_hsspi_suspend(struct platform_device *pdev,
-+				 pm_message_t mesg)
-+{
-+	struct spi_master *master = platform_get_drvdata(pdev);
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+	spi_master_suspend(master);
-+	clk_disable(bs->clk);
-+
-+	return 0;
-+}
-+
-+static int bcm63xx_hsspi_resume(struct platform_device *pdev)
-+{
-+	struct spi_master *master = platform_get_drvdata(pdev);
-+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+	clk_enable(bs->clk);
-+	spi_master_resume(master);
-+
-+	return 0;
-+}
-+
-+static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = {
-+	.suspend	= bcm63xx_hsspi_suspend,
-+	.resume		= bcm63xx_hsspi_resume,
-+};
-+
-+#define BCM63XX_HSSPI_PM_OPS	(&bcm63xx_hsspi_pm_ops)
-+#else
-+#define BCM63XX_HSSPI_PM_OPS	NULL
-+#endif
-+
-+
-+
-+static struct platform_driver bcm63xx_hsspi_driver = {
-+	.driver = {
-+		.name	= "bcm63xx-hsspi",
-+		.owner	= THIS_MODULE,
-+		.pm	= BCM63XX_HSSPI_PM_OPS,
-+	},
-+	.probe		= bcm63xx_hsspi_probe,
-+	.remove		= __exit_p(bcm63xx_hsspi_remove),
-+};
-+
-+module_platform_driver(bcm63xx_hsspi_driver);
-+
-+MODULE_ALIAS("platform:bcm63xx_hsspi");
-+MODULE_DESCRIPTION("Broadcom BCM63xx HS SPI Controller driver");
-+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com>");
-+MODULE_LICENSE("GPL");