bcm63xx: reorder patches

Reorder patches for a clearer distinction between the purposes of
the different patches.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31127 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 53 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.3/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.3/519_board_CPVA502plus.patch
new file mode 100644
index 000000000..d90ed9b5d
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/519_board_CPVA502plus.patch
@@ -0,0 +1,53 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -436,6 +436,42 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_CPVA502plus = {
++	.name				= "CPVA502+",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++	.enet1 = {
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "phone",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "link",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "feth1", /* FIXME:does gpio4 enable eth1 phy? */
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -2009,6 +2045,7 @@ static const struct board_info __initdat
+ 	&board_V2110,
+ 	&board_ct536_ct5621,
+ 	&board_96348A_122,
++	&board_CPVA502plus,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358