[brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known

imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987).


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 126 insertions, 14 deletions

diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 7c4ed4644..9ba137df7 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -17,6 +17,8 @@ LOADER_MAKEOPTS= \
 		KERNEL_ENTRY=$(KERNEL_ENTRY) \
 		RAMSIZE=$(RAMSIZE)
 
+SVN_REVISION=r$(shell svn info|grep Revision|cut -f1 -d\ )
+
 define trxalign/jffs2-128k
 -a 0x20000
 endef
@@ -30,8 +32,9 @@ endef
 define Image/Build/CFE
 	# Generate the tagged image
 	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
-		-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin \
-		-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR)
+		-o $(BIN_DIR)/openwrt-$(2)-$(1)-$(6)-cfe.bin \
+		-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+	        -t $(4) -d "$(5)"
 #		-b $(2) -c $(3) -e $(KERNEL_ENTRY) -l $(LOADADDR)
 
 endef
@@ -39,9 +42,9 @@ endef
 define Image/Build/CFEAGPF
 	# Generate the tagged image
 	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
-		-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin \
+		-o $(BIN_DIR)/openwrt-$(2)-$(1)-$(7)-cfe.bin \
 		-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
-		-v 8 -m IMAGE -k 0x20000 -n $(4) -p alice
+		-v 8 -m IMAGE -k 0x20000 -n $(4) -t $(5)
 endef
 
 define Image/Build/RedBoot
@@ -95,24 +98,42 @@ endef
 define Image/Build
 	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
 	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
-	$(call Image/Build/CFE,$(1),96345GW2,6345)
-	$(call Image/Build/CFE,$(1),96348GW,6348)
+	# Various routers
+	$(call Image/Build/CFE,$(1),96345GW2,6345,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96345GW2,6345,bc300,,bc300)
+	$(call Image/Build/CFE,$(1),96345GW2,6345,bc310,OpenWRT-$(SVN_REVISION),bc310)
+	$(call Image/Build/CFE,$(1),96348GW,6348,bccfe,,bcfe)
+	# BT Voyager V2500V
+	$(call Image/Build/CFE,$(1),V2500V_BB,6348,bc308,,btvgr)
+	# Tecom GW6000
+	$(call Image/Build/CFE,$(1),96348GW,6348,bc300,,bc300)
+	# Tecom GW6200
+	$(call Image/Build/CFE,$(1),96348GW,6348,bc310,$(shell printf '\x99'),gw6200)
 	# Neufbox4
-	$(call Image/Build/CFE,$(1),96358VW,6358)
-	# Comtrend 536
-	$(call Image/Build/CFE,$(1),96348GW-11,6348)
+	$(call Image/Build/CFE,$(1),96358VW,6358,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96358VW,6358,bc310,OpenWRT-$(SVN_REVISION),nb4)
+	# Comtrend 536, 5621
+	$(call Image/Build/CFE,$(1),96348GW-11,6348,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96348GW-11,6348,bc300,,bc300)
 	# Davolink DV201AMR
 	$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
 	# USR 9108
-	$(call Image/Build/CFE,$(1),96348GW-A,6348)
-	# DG834GT
-	$(call Image/Build/CFE,$(1),96348GW-10,6348)
+	$(call Image/Build/CFE,$(1),96348GW-A,6348,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96348GW-A,6348,bc300,,bc300)
+	$(call Image/Build/CFE,$(1),96348GW-A,6348,bc310,OpenWRT-$(SVN_REVISION),bc310)
+	# NetGear DG834GT
+	$(call Image/Build/CFE,$(1),96348GW-10,6348,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96348GW-10,6348,bc300,,bc300)
+
 	# Sagem F@ST2404
-	$(call Image/Build/CFE,$(1),F@ST2404,6348)
+	$(call Image/Build/CFE,$(1),F@ST2404,6348,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),F@ST2404,6348,bc300,,bc300)
+	$(call Image/Build/CFE,$(1),F@ST2404,6348,bc310,OpenWRT-$(SVN_REVISION),bc310)
 	# Inventel Livebox
 	$(call Image/Build/RedBoot,livebox)
 	# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
-	$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000)
+	$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,bccfe,,bccfe)
+	$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,ag306,,agv2+w)
 endef
 
 $(eval $(call BuildImage))
diff --git a/target/linux/brcm63xx/image/README.images-bcm63xx b/target/linux/brcm63xx/image/README.images-bcm63xx
new file mode 100644
index 000000000..574d1bdc0
--- /dev/null
+++ b/target/linux/brcm63xx/image/README.images-bcm63xx
@@ -0,0 +1,91 @@
+The image neede to flash onto a Broadcom 63xx-series board depends on the
+board, method you are using to flash, and, for web-based flash, on the version
+of the Broadcom code your router uses.
+
+There are two major revisions of the Broadcom code as far as imagetags are
+concerned, before 3.08 and after 3.08, however there are some variations 
+within in that, either due to vendor differences or due to changes at 
+Broadcom (it's not clear yet which is the case).  In addtion Pirelli modified
+the Broadcom code, so Alice Gate models use a different imagetag than any 
+other vendor.
+
+The imagetag format for flashing via CFE is the same for almost all the 
+boards, and is the same for all images generated by the imagetag utility.
+Images flashable using cfe are labelled openwrt-<board>-<filesystem>-cfe.bin
+
+The imagetags for tftp/ftp flashing is based on Broadcom 3.00-3.04 imagetags
+and is known to be correct as the source code GPL and is available for reading.
+
+Broadcom 3.00-3.02 flashing has been tested on Comtrend CT-5261, CT-536 and 
+Tecom GW6000, and is the version of the flashing that was present before the
+imagetags were split by broadcom code version (early June 2009)
+
+3.04 is guessed to be the same as 3.00-3.02 based on available information
+
+Broadom 3.06 is thought to be the same as 3.00-3.02, however the only 3.06 
+this author (Daniel Dickinson) has seen is the Alice Gate (Pirelli) firmware
+which is known to be different due to vendor (Pirelli) modifications to the
+Broadcom code.
+
+Broadcom 3.08 introduced changes to the imagetag to deal with TR69 (a remote
+router management system developed by the DSL Forum).  The version we are
+using as 3.08 is based on the BT Voyager firmware image I looked at.  It may
+in fact be BT Voyager-specific, and may in fact not be 3.08, but modified 3.06
+and not apply to all 3.08 versions.
+
+Broadcom 3.10 uses an imagetag that is believed to apply to all 3.10 and 3.12
+versions, and has been tested on the Tecom GW6200.  It is similar to 3.08.  
+There is a field for vendor-specific information, that at least in some cases
+is not optional.  It is based on the hexedit of a neufbox4 firmware image, the
+information in https://dev.openwrt.org/ticket/4987, and the hexedit of a Tecom
+GW6200 image.
+
+Some boards share the same tag format, but require vendor-specific fields in
+the board.  In that case the tagid is shared, but the filename of the generated
+image reflects the router for which the image was created.
+
+router     |method| codever |tagid |filename
++----------+------+---------+------+-------------------------------------------
+|any       |cfe   |   any   |bccfe |openwrt-<board>-<filesystem>-bccfe-cfe.bin
+|any       |t/ftp |   any   |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|          |web   |3.00-3.06|bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|          |web   |3.08     |bc308 |openwrt-<board>-<filesystem>-bc308-cfe.bin
+|          |web   |3.10-3.12|bc310 |openwrt-<board>-<filesystem>-bc310-cfe.bin
+|CT536     |web   |3.02     |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|CT5621    |web   |3.02     |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|GW6000    |web   |3.00     |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|USR9108?  |web   |?        |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|USR9108?  |web   |?        |bc310 |openwrt-<board>-<filesystem>-bc310-cfe.bin
+|DG834GT   |web   |3.02     |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|V2500V    |web   |3.08     |bc308 |openwrt-<board>-<filesystem>-btvgr-cfe.bin
+|GW6200    |web   |3.10     |bc310 |openwrt-<board>-<filesystem>-gw6200-cfe.bin
+|Neufbox4  |web   |3.12     |bc310 |openwrt-<board>-<filesystem>-nb4-cfe.bin
+|F@ST2404  |web   |?        |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|F@ST2404  |web   |?        |bc310 |openwrt-<board>-<filesystem>-bc310-cfe.bin
+|AGVoIP2+Wi|web   |alice3.06|ag306 |openwrt-<board>-<filesystem>-agv2+w-cfe.bin
+
+Old imagetag routers
+--------------------
+Davolink DV201AMR
+
+Redboot routers
+---------------
+Inventel Livebox
+
+Known router->code versions
+---------------------------
+
+Vendor                     |Model                                     |Code Ver
+---------------------------+------------------------------------------+--------
+Comtrend                   |CT-5261                                   |3.02
+Comtrend                   |CT-536                                    |3.02
+Tecom                      |GW6000                                    |3.00
+Tecom                      |GW6200                                    |3.10
+Pirelli                    |Alice Gate Wi-Fi (+VoIP models?)          |ag 3.06
+?                          |TD-88xx                                   |3.06
+BT                         |Voyager V2500V                            |3.08 (?)
+Belkin                     |F5D7633                                   |3.10
+Neuf ?                     |Neufbox 4                                 |3.12
+NetGear			   |DG834GT				      |3.02
+Sagem			   |F@ST2404				      |?
+USR			   |9108				      |?