[brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known

imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987).


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 91 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/image/README.images-bcm63xx b/target/linux/brcm63xx/image/README.images-bcm63xx
new file mode 100644
index 000000000..574d1bdc0
--- /dev/null
+++ b/target/linux/brcm63xx/image/README.images-bcm63xx
@@ -0,0 +1,91 @@
+The image neede to flash onto a Broadcom 63xx-series board depends on the
+board, method you are using to flash, and, for web-based flash, on the version
+of the Broadcom code your router uses.
+
+There are two major revisions of the Broadcom code as far as imagetags are
+concerned, before 3.08 and after 3.08, however there are some variations 
+within in that, either due to vendor differences or due to changes at 
+Broadcom (it's not clear yet which is the case).  In addtion Pirelli modified
+the Broadcom code, so Alice Gate models use a different imagetag than any 
+other vendor.
+
+The imagetag format for flashing via CFE is the same for almost all the 
+boards, and is the same for all images generated by the imagetag utility.
+Images flashable using cfe are labelled openwrt-<board>-<filesystem>-cfe.bin
+
+The imagetags for tftp/ftp flashing is based on Broadcom 3.00-3.04 imagetags
+and is known to be correct as the source code GPL and is available for reading.
+
+Broadcom 3.00-3.02 flashing has been tested on Comtrend CT-5261, CT-536 and 
+Tecom GW6000, and is the version of the flashing that was present before the
+imagetags were split by broadcom code version (early June 2009)
+
+3.04 is guessed to be the same as 3.00-3.02 based on available information
+
+Broadom 3.06 is thought to be the same as 3.00-3.02, however the only 3.06 
+this author (Daniel Dickinson) has seen is the Alice Gate (Pirelli) firmware
+which is known to be different due to vendor (Pirelli) modifications to the
+Broadcom code.
+
+Broadcom 3.08 introduced changes to the imagetag to deal with TR69 (a remote
+router management system developed by the DSL Forum).  The version we are
+using as 3.08 is based on the BT Voyager firmware image I looked at.  It may
+in fact be BT Voyager-specific, and may in fact not be 3.08, but modified 3.06
+and not apply to all 3.08 versions.
+
+Broadcom 3.10 uses an imagetag that is believed to apply to all 3.10 and 3.12
+versions, and has been tested on the Tecom GW6200.  It is similar to 3.08.  
+There is a field for vendor-specific information, that at least in some cases
+is not optional.  It is based on the hexedit of a neufbox4 firmware image, the
+information in https://dev.openwrt.org/ticket/4987, and the hexedit of a Tecom
+GW6200 image.
+
+Some boards share the same tag format, but require vendor-specific fields in
+the board.  In that case the tagid is shared, but the filename of the generated
+image reflects the router for which the image was created.
+
+router     |method| codever |tagid |filename
++----------+------+---------+------+-------------------------------------------
+|any       |cfe   |   any   |bccfe |openwrt-<board>-<filesystem>-bccfe-cfe.bin
+|any       |t/ftp |   any   |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|          |web   |3.00-3.06|bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|          |web   |3.08     |bc308 |openwrt-<board>-<filesystem>-bc308-cfe.bin
+|          |web   |3.10-3.12|bc310 |openwrt-<board>-<filesystem>-bc310-cfe.bin
+|CT536     |web   |3.02     |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|CT5621    |web   |3.02     |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|GW6000    |web   |3.00     |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|USR9108?  |web   |?        |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|USR9108?  |web   |?        |bc310 |openwrt-<board>-<filesystem>-bc310-cfe.bin
+|DG834GT   |web   |3.02     |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|V2500V    |web   |3.08     |bc308 |openwrt-<board>-<filesystem>-btvgr-cfe.bin
+|GW6200    |web   |3.10     |bc310 |openwrt-<board>-<filesystem>-gw6200-cfe.bin
+|Neufbox4  |web   |3.12     |bc310 |openwrt-<board>-<filesystem>-nb4-cfe.bin
+|F@ST2404  |web   |?        |bc300 |openwrt-<board>-<filesystem>-bc300-cfe.bin
+|F@ST2404  |web   |?        |bc310 |openwrt-<board>-<filesystem>-bc310-cfe.bin
+|AGVoIP2+Wi|web   |alice3.06|ag306 |openwrt-<board>-<filesystem>-agv2+w-cfe.bin
+
+Old imagetag routers
+--------------------
+Davolink DV201AMR
+
+Redboot routers
+---------------
+Inventel Livebox
+
+Known router->code versions
+---------------------------
+
+Vendor                     |Model                                     |Code Ver
+---------------------------+------------------------------------------+--------
+Comtrend                   |CT-5261                                   |3.02
+Comtrend                   |CT-536                                    |3.02
+Tecom                      |GW6000                                    |3.00
+Tecom                      |GW6200                                    |3.10
+Pirelli                    |Alice Gate Wi-Fi (+VoIP models?)          |ag 3.06
+?                          |TD-88xx                                   |3.06
+BT                         |Voyager V2500V                            |3.08 (?)
+Belkin                     |F5D7633                                   |3.10
+Neuf ?                     |Neufbox 4                                 |3.12
+NetGear			   |DG834GT				      |3.02
+Sagem			   |F@ST2404				      |?
+USR			   |9108				      |?