diff options
| author | florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2008-11-15 11:21:42 +0000 |
|---|---|---|
| committer | florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2008-11-15 11:21:42 +0000 |
| commit | 42dd4ac5f0d25d070b888dae143e0987f46826c3 (patch) | |
| tree | 18e3915ee612328a9a1a17deaf7bc6f4ad63e1dd /target/linux/brcm63xx/files/include/asm-mips | |
| parent | e3c583df0fbff69ea20d2e83a7bbbc466f73eb67 (diff) | |
Delete old brcm63xx files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13210 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm63xx/files/include/asm-mips')
16 files changed, 0 insertions, 2330 deletions
diff --git a/target/linux/brcm63xx/files/include/asm-mips/cfe.h b/target/linux/brcm63xx/files/include/asm-mips/cfe.h deleted file mode 100644 index 47c3f5613..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/cfe.h +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Broadcom Common Firmware Environment (CFE) support - * - * Copyright 2000, 2001, 2002 - * Broadcom Corporation. All rights reserved. - * - * Copyright (C) 2006 Michael Buesch - * - * Original Authors: Mitch Lichtenberg, Chris Demetriou - * - * This software is furnished under license and may be used and copied only - * in accordance with the following terms and conditions. Subject to these - * conditions, you may download, copy, install, use, modify and distribute - * modified or unmodified copies of this software in source and/or binary - * form. No title or ownership is transferred hereby. - * - * 1) Any source code used, modified or distributed must reproduce and - * retain this copyright notice and list of conditions as they appear in - * the source file. - * - * 2) No right is granted to use any trade name, trademark, or logo of - * Broadcom Corporation. The "Broadcom Corporation" name may not be - * used to endorse or promote products derived from this software - * without the prior written permission of Broadcom Corporation. - * - * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR - * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE - * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE - * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef LINUX_CFE_API_H_ -#define LINUX_CFE_API_H_ - -#include <linux/types.h> - - -#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ -#define CFE_MI_AVAILABLE 1 /* memory is available */ - -#define CFE_FLG_WARMSTART 0x00000001 -#define CFE_FLG_FULL_ARENA 0x00000001 -#define CFE_FLG_ENV_PERMANENT 0x00000001 - -#define CFE_CPU_CMD_START 1 -#define CFE_CPU_CMD_STOP 0 - -#define CFE_STDHANDLE_CONSOLE 0 - -#define CFE_DEV_NETWORK 1 -#define CFE_DEV_DISK 2 -#define CFE_DEV_FLASH 3 -#define CFE_DEV_SERIAL 4 -#define CFE_DEV_CPU 5 -#define CFE_DEV_NVRAM 6 -#define CFE_DEV_CLOCK 7 -#define CFE_DEV_OTHER 8 -#define CFE_DEV_MASK 0x0F - -#define CFE_CACHE_FLUSH_D 1 -#define CFE_CACHE_INVAL_I 2 -#define CFE_CACHE_INVAL_D 4 -#define CFE_CACHE_INVAL_L2 8 - -#define CFE_FWI_64BIT 0x00000001 -#define CFE_FWI_32BIT 0x00000002 -#define CFE_FWI_RELOC 0x00000004 -#define CFE_FWI_UNCACHED 0x00000008 -#define CFE_FWI_MULTICPU 0x00000010 -#define CFE_FWI_FUNCSIM 0x00000020 -#define CFE_FWI_RTLSIM 0x00000040 - -struct cfe_fwinfo { - s64 version; /* major, minor, eco version */ - s64 totalmem; /* total installed mem */ - s64 flags; /* various flags */ - s64 boardid; /* board ID */ - s64 bootarea_va; /* VA of boot area */ - s64 bootarea_pa; /* PA of boot area */ - s64 bootarea_size; /* size of boot area */ -}; - - -/* The public CFE API */ - -int cfe_present(void); /* Check if we booted from CFE. Returns bool */ - -int cfe_getticks(s64 *ticks); -int cfe_close(int handle); -int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1); -int cfe_cpu_stop(int cpu); -int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen); -int cfe_enumdev(int idx, char *name, int namelen); -int cfe_enummem(int idx, int flags, u64 *start, u64 *length, - u64 *type); -int cfe_exit(int warm, int status); -int cfe_flushcache(int flags); -int cfe_getdevinfo(char *name); -int cfe_getenv(char *name, char *dest, int destlen); -int cfe_getfwinfo(struct cfe_fwinfo *info); -int cfe_getstdhandle(int handletype); -int cfe_inpstat(int handle); -int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, - int length, int *retlen, u64 offset); -int cfe_open(char *name); -int cfe_read(int handle, unsigned char *buffer, int length); -int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length); -int cfe_setenv(char *name, char *val); -int cfe_write(int handle, unsigned char *buffer, int length); -int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, - int length); - - -/* High level API */ - -/* Print some information to CFE's console (most likely serial line) */ -int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2))); -int cfe_vprintk(const char *fmt, va_list args); - - - -/* Error codes returned by the low API functions */ - -#define CFE_ISERR(errcode) (errcode < 0) - -#define CFE_OK 0 -#define CFE_ERR -1 /* generic error */ -#define CFE_ERR_INV_COMMAND -2 -#define CFE_ERR_EOF -3 -#define CFE_ERR_IOERR -4 -#define CFE_ERR_NOMEM -5 -#define CFE_ERR_DEVNOTFOUND -6 -#define CFE_ERR_DEVOPEN -7 -#define CFE_ERR_INV_PARAM -8 -#define CFE_ERR_ENVNOTFOUND -9 -#define CFE_ERR_ENVREADONLY -10 - -#define CFE_ERR_NOTELF -11 -#define CFE_ERR_NOT32BIT -12 -#define CFE_ERR_WRONGENDIAN -13 -#define CFE_ERR_BADELFVERS -14 -#define CFE_ERR_NOTMIPS -15 -#define CFE_ERR_BADELFFMT -16 -#define CFE_ERR_BADADDR -17 - -#define CFE_ERR_FILENOTFOUND -18 -#define CFE_ERR_UNSUPPORTED -19 - -#define CFE_ERR_HOSTUNKNOWN -20 - -#define CFE_ERR_TIMEOUT -21 - -#define CFE_ERR_PROTOCOLERR -22 - -#define CFE_ERR_NETDOWN -23 -#define CFE_ERR_NONAMESERVER -24 - -#define CFE_ERR_NOHANDLES -25 -#define CFE_ERR_ALREADYBOUND -26 - -#define CFE_ERR_CANNOTSET -27 -#define CFE_ERR_NOMORE -28 -#define CFE_ERR_BADFILESYS -29 -#define CFE_ERR_FSNOTAVAIL -30 - -#define CFE_ERR_INVBOOTBLOCK -31 -#define CFE_ERR_WRONGDEVTYPE -32 -#define CFE_ERR_BBCHECKSUM -33 -#define CFE_ERR_BOOTPROGCHKSUM -34 - -#define CFE_ERR_LDRNOTAVAIL -35 - -#define CFE_ERR_NOTREADY -36 - -#define CFE_ERR_GETMEM -37 -#define CFE_ERR_SETMEM -38 - -#define CFE_ERR_NOTCONN -39 -#define CFE_ERR_ADDRINUSE -40 - - -#endif /* LINUX_CFE_API_H_ */ diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_intr.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_intr.h deleted file mode 100644 index 3a6e00a2a..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_intr.h +++ /dev/null @@ -1,64 +0,0 @@ -/* -<:copyright-gpl - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __6338_INTR_H -#define __6338_INTR_H - -/*=====================================================================*/ -/* BCM6338 External Interrupt Level Assignments */ -/*=====================================================================*/ -#define INTERRUPT_ID_EXTERNAL_0 3 -#define INTERRUPT_ID_EXTERNAL_1 4 -#define INTERRUPT_ID_EXTERNAL_2 5 -#define INTERRUPT_ID_EXTERNAL_3 6 - -/*=====================================================================*/ -/* BCM6338 Timer Interrupt Level Assignments */ -/*=====================================================================*/ -#define MIPS_TIMER_INT 7 - -/*=====================================================================*/ -/* Peripheral ISR Table Offset */ -/*=====================================================================*/ -#define INTERNAL_ISR_TABLE_OFFSET 8 - -/*=====================================================================*/ -/* Logical Peripheral Interrupt IDs */ -/*=====================================================================*/ - -#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) -#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) -#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) -#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) -#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) -#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) -#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) -#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) -#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) - -#endif /* __BCM6338_H */ - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h deleted file mode 100644 index 70bf80734..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h +++ /dev/null @@ -1,334 +0,0 @@ -/* -<:copyright-gpl - Copyright 2004 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM6338_MAP_H -#define __BCM6338_MAP_H - -#include "bcmtypes.h" - -#define PERF_BASE 0xfffe0000 -#define TIMR_BASE 0xfffe0200 -#define UART_BASE 0xfffe0300 -#define GPIO_BASE 0xfffe0400 -#define SPI_BASE 0xfffe0c00 - -typedef struct PerfControl { - uint32 RevID; - uint16 testControl; - uint16 blkEnables; -#define EMAC_CLK_EN 0x0010 -#define USBS_CLK_EN 0x0010 -#define SAR_CLK_EN 0x0020 - -#define SPI_CLK_EN 0x0200 - - uint32 pll_control; -#define SOFT_RESET 0x00000001 - - uint32 IrqMask; - uint32 IrqStatus; - - uint32 ExtIrqCfg; -#define EI_SENSE_SHFT 0 -#define EI_STATUS_SHFT 5 -#define EI_CLEAR_SHFT 10 -#define EI_MASK_SHFT 15 -#define EI_INSENS_SHFT 20 -#define EI_LEVEL_SHFT 25 - - uint32 unused[4]; /* (18) */ - uint32 BlockSoftReset; /* (28) */ -#define BSR_SPI 0x00000001 -#define BSR_EMAC 0x00000004 -#define BSR_USBH 0x00000008 -#define BSR_USBS 0x00000010 -#define BSR_ADSL 0x00000020 -#define BSR_DMAMEM 0x00000040 -#define BSR_SAR 0x00000080 -#define BSR_ACLC 0x00000100 -#define BSR_ADSL_MIPS_PLL 0x00000400 -#define BSR_ALL_BLOCKS \ - (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ - BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -} PerfControl; - -#define PERF ((volatile PerfControl * const) PERF_BASE) - - -typedef struct Timer { - uint16 unused0; - byte TimerMask; -#define TIMER0EN 0x01 -#define TIMER1EN 0x02 -#define TIMER2EN 0x04 - byte TimerInts; -#define TIMER0 0x01 -#define TIMER1 0x02 -#define TIMER2 0x04 -#define WATCHDOG 0x08 - uint32 TimerCtl0; - uint32 TimerCtl1; - uint32 TimerCtl2; -#define TIMERENABLE 0x80000000 -#define RSTCNTCLR 0x40000000 - uint32 TimerCnt0; - uint32 TimerCnt1; - uint32 TimerCnt2; - uint32 WatchDogDefCount; - - /* Write 0xff00 0x00ff to Start timer - * Write 0xee00 0x00ee to Stop and re-load default count - * Read from this register returns current watch dog count - */ - uint32 WatchDogCtl; - - /* Number of 40-MHz ticks for WD Reset pulse to last */ - uint32 WDResetCount; -} Timer; - -#define TIMER ((volatile Timer * const) TIMR_BASE) -typedef struct UartChannel { - byte unused0; - byte control; -#define BRGEN 0x80 /* Control register bit defs */ -#define TXEN 0x40 -#define RXEN 0x20 -#define LOOPBK 0x10 -#define TXPARITYEN 0x08 -#define TXPARITYEVEN 0x04 -#define RXPARITYEN 0x02 -#define RXPARITYEVEN 0x01 - - byte config; -#define XMITBREAK 0x40 -#define BITS5SYM 0x00 -#define BITS6SYM 0x10 -#define BITS7SYM 0x20 -#define BITS8SYM 0x30 -#define ONESTOP 0x07 -#define TWOSTOP 0x0f - /* 4-LSBS represent STOP bits/char - * in 1/8 bit-time intervals. Zero - * represents 1/8 stop bit interval. - * Fifteen represents 2 stop bits. - */ - byte fifoctl; -#define RSTTXFIFOS 0x80 -#define RSTRXFIFOS 0x40 - /* 5-bit TimeoutCnt is in low bits of this register. - * This count represents the number of characters - * idle times before setting receive Irq when below threshold - */ - uint32 baudword; - /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate - */ - - byte txf_levl; /* Read-only fifo depth */ - byte rxf_levl; /* Read-only fifo depth */ - byte fifocfg; /* Upper 4-bits are TxThresh, Lower are - * RxThreshold. Irq can be asserted - * when rx fifo> thresh, txfifo<thresh - */ - byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) - * if these bits are also enabled to GPIO_o - */ -#define DTREN 0x01 -#define RTSEN 0x02 - - byte unused1; - byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to - * detect irq on rising AND falling - * edges for corresponding GPIO_i - * if enabled (edge insensitive) - */ - byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense - * 0 for negedge sense if - * not configured for edge - * insensitive (see above) - * Lower 4 bits: Mask to enable change - * detection IRQ for corresponding - * GPIO_i - */ - byte DeltaIP_SyncIP; /* Upper 4 bits show which bits - * have changed (may set IRQ). - * read automatically clears bit - * Lower 4 bits are actual status - */ - - uint16 intMask; /* Same Bit defs for Mask and status */ - uint16 intStatus; -#define DELTAIP 0x0001 -#define TXUNDERR 0x0002 -#define TXOVFERR 0x0004 -#define TXFIFOTHOLD 0x0008 -#define TXREADLATCH 0x0010 -#define TXFIFOEMT 0x0020 -#define RXUNDERR 0x0040 -#define RXOVFERR 0x0080 -#define RXTIMEOUT 0x0100 -#define RXFIFOFULL 0x0200 -#define RXFIFOTHOLD 0x0400 -#define RXFIFONE 0x0800 -#define RXFRAMERR 0x1000 -#define RXPARERR 0x2000 -#define RXBRK 0x4000 - - uint16 unused2; - uint16 Data; /* Write to TX, Read from RX */ - /* bits 11:8 are BRK,PAR,FRM errors */ - - uint32 unused3; - uint32 unused4; -} Uart; - -#define UART ((volatile Uart * const) UART_BASE) - -typedef struct GpioControl { - uint32 unused0; - uint32 GPIODir; /* bits 7:0 */ - uint32 unused1; - uint32 GPIOio; /* bits 7:0 */ - uint32 LEDCtrl; -#define LED3_STROBE 0x08000000 -#define LED2_STROBE 0x04000000 -#define LED1_STROBE 0x02000000 -#define LED0_STROBE 0x01000000 -#define LED_TEST 0x00010000 -#define LED3_DISABLE_LINK_ACT 0x00008000 -#define LED2_DISABLE_LINK_ACT 0x00004000 -#define LED1_DISABLE_LINK_ACT 0x00002000 -#define LED0_DISABLE_LINK_ACT 0x00001000 -#define LED_INTERVAL_SET_MASK 0x00000f00 -#define LED_INTERVAL_SET_320MS 0x00000500 -#define LED_INTERVAL_SET_160MS 0x00000400 -#define LED_INTERVAL_SET_80MS 0x00000300 -#define LED_INTERVAL_SET_40MS 0x00000200 -#define LED_INTERVAL_SET_20MS 0x00000100 -#define LED3_ON 0x00000080 -#define LED2_ON 0x00000040 -#define LED1_ON 0x00000020 -#define LED0_ON 0x00000010 -#define LED3_ENABLE 0x00000008 -#define LED2_ENABLE 0x00000004 -#define LED1_ENABLE 0x00000002 -#define LED0_ENABLE 0x00000001 - uint32 SpiSlaveCfg; -#define SPI_SLAVE_RESET 0x00010000 -#define SPI_RESTRICT 0x00000400 -#define SPI_DELAY_DISABLE 0x00000200 -#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 -#define SPI_SER_ADDR_CFG_MASK 0x0000000c -#define SPI_MODE 0x00000001 - uint32 vRegConfig; -} GpioControl; - -#define GPIO ((volatile GpioControl * const) GPIO_BASE) - -/* Number to mask conversion macro used for GPIODir and GPIOio */ -#define GPIO_NUM_MAX_BITS_MASK 0x0f -#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) - -/* -** Spi Controller -*/ - -typedef struct SpiControl { - uint16 spiCmd; /* (0x0): SPI command */ -#define SPI_CMD_START_IMMEDIATE 3 - -#define SPI_CMD_COMMAND_SHIFT 0 -#define SPI_CMD_DEVICE_ID_SHIFT 4 -#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 - - byte spiIntStatus; /* (0x2): SPI interrupt status */ - byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */ - - byte spiIntMask; /* (0x4): SPI interrupt mask */ -#define SPI_INTR_CMD_DONE 0x01 -#define SPI_INTR_CLEAR_ALL 0x1f - - byte spiStatus; /* (0x5): SPI status */ - - byte spiClkCfg; /* (0x6): SPI clock configuration */ - - byte spiFillByte; /* (0x7): SPI fill byte */ - - byte unused0; - byte spiMsgTail; /* (0x9): msgtail */ - byte unused1; - byte spiRxTail; /* (0xB): rxtail */ - - uint32 unused2[13]; /* (0x0c - 0x3c) reserved */ - - byte spiMsgCtl; /* (0x40) control byte */ -#define HALF_DUPLEX_W 1 -#define HALF_DUPLEX_R 2 -#define SPI_MSG_TYPE_SHIFT 6 -#define SPI_BYTE_CNT_SHIFT 0 - byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */ - byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */ - byte unused3[64]; /* (0xc0 - 0xff) reserved */ -} SpiControl; - -#define SPI ((volatile SpiControl * const) SPI_BASE) - -/* -** External Bus Interface -*/ -typedef struct EbiChipSelect { - uint32 base; /* base address in upper 24 bits */ -#define EBI_SIZE_8K 0 -#define EBI_SIZE_16K 1 -#define EBI_SIZE_32K 2 -#define EBI_SIZE_64K 3 -#define EBI_SIZE_128K 4 -#define EBI_SIZE_256K 5 -#define EBI_SIZE_512K 6 -#define EBI_SIZE_1M 7 -#define EBI_SIZE_2M 8 -#define EBI_SIZE_4M 9 -#define EBI_SIZE_8M 10 -#define EBI_SIZE_16M 11 -#define EBI_SIZE_32M 12 -#define EBI_SIZE_64M 13 -#define EBI_SIZE_128M 14 -#define EBI_SIZE_256M 15 - uint32 config; -#define EBI_ENABLE 0x00000001 /* .. enable this range */ -#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -#define EBI_WREN 0x00000020 /* enable posted writes */ -#define EBI_POLARITY 0x00000040 /* .. set to invert something, - ** don't know what yet */ -#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -#define EBI_FIFO 0x00000200 /* .. use fifo */ -#define EBI_RE 0x00000400 /* .. Reverse Endian */ -} EbiChipSelect; - -typedef struct MpiRegisters { - EbiChipSelect cs[1]; /* size chip select configuration */ -} MpiRegisters; - -#define MPI ((volatile MpiRegisters * const) MPI_BASE) - - -#endif - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_intr.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_intr.h deleted file mode 100644 index fb77cbcbe..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_intr.h +++ /dev/null @@ -1,72 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __6345_INTR_H -#define __6345_INTR_H - - -/*=====================================================================*/ -/* BCM6345 External Interrupt Level Assignments */ -/*=====================================================================*/ -#define INTERRUPT_ID_EXTERNAL_0 3 -#define INTERRUPT_ID_EXTERNAL_1 4 -#define INTERRUPT_ID_EXTERNAL_2 5 -#define INTERRUPT_ID_EXTERNAL_3 6 - -/*=====================================================================*/ -/* BCM6345 Timer Interrupt Level Assignments */ -/*=====================================================================*/ -#define MIPS_TIMER_INT 7 - -/*=====================================================================*/ -/* Peripheral ISR Table Offset */ -/*=====================================================================*/ -#define INTERNAL_ISR_TABLE_OFFSET 8 -#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) - -/*=====================================================================*/ -/* Logical Peripheral Interrupt IDs */ -/*=====================================================================*/ - -/* Internal peripheral interrupt IDs */ -#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) -#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) -#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) -#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) -#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) - -/* DMA channel interrupt IDs */ -#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) -#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) -#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) -#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) -#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) -#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) -#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) -#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) -#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) -#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) -#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) -#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) - - -#endif /* __BCM6345_H */ - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_map_part.h deleted file mode 100644 index 78e59a439..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_map_part.h +++ /dev/null @@ -1,163 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM6345_MAP_H -#define __BCM6345_MAP_H - - -#include "bcmtypes.h" -#include "6345_intr.h" - -typedef struct IntControl { - uint32 RevID; - uint16 testControl; - uint16 blkEnables; -#define USB_CLK_EN 0x0100 -#define EMAC_CLK_EN 0x0080 -#define UART_CLK_EN 0x0008 -#define CPU_CLK_EN 0x0001 - - uint32 pll_control; -#define SOFT_RESET 0x00000001 - - uint32 IrqMask; - uint32 IrqStatus; - - uint32 ExtIrqCfg; -#define EI_SENSE_SHFT 0 -#define EI_STATUS_SHFT 4 -#define EI_CLEAR_SHFT 8 -#define EI_MASK_SHFT 12 -#define EI_INSENS_SHFT 16 -#define EI_LEVEL_SHFT 20 -} IntControl; - -#define INTC_BASE 0xfffe0000 -#define PERF ((volatile IntControl * const) INTC_BASE) - -#define TIMR_BASE 0xfffe0200 -typedef struct Timer { - uint16 unused0; - byte TimerMask; -#define TIMER0EN 0x01 -#define TIMER1EN 0x02 -#define TIMER2EN 0x04 - byte TimerInts; -#define TIMER0 0x01 -#define TIMER1 0x02 -#define TIMER2 0x04 -#define WATCHDOG 0x08 - uint32 TimerCtl0; - uint32 TimerCtl1; - uint32 TimerCtl2; -#define TIMERENABLE 0x80000000 -#define RSTCNTCLR 0x40000000 - uint32 TimerCnt0; - uint32 TimerCnt1; - uint32 TimerCnt2; - uint32 WatchDogDefCount; - - /* Write 0xff00 0x00ff to Start timer - * Write 0xee00 0x00ee to Stop and re-load default count - * Read from this register returns current watch dog count - */ - uint32 WatchDogCtl; - - /* Number of 40-MHz ticks for WD Reset pulse to last */ - uint32 WDResetCount; -} Timer; - -#define TIMER ((volatile Timer * const) TIMR_BASE) - -typedef struct UartChannel { - byte unused0; - byte control; -#define BRGEN 0x80 /* Control register bit defs */ -#define TXEN 0x40 -#define RXEN 0x20 -#define TXPARITYEN 0x08 -#define TXPARITYEVEN 0x04 -#define RXPARITYEN 0x02 -#define RXPARITYEVEN 0x01 - byte config; -#define BITS5SYM 0x00 -#define BITS6SYM 0x10 -#define BITS7SYM 0x20 -#define BITS8SYM 0x30 -#define XMITBREAK 0x40 -#define ONESTOP 0x07 -#define TWOSTOP 0x0f - - byte fifoctl; -#define RSTTXFIFOS 0x80 -#define RSTRXFIFOS 0x40 - uint32 baudword; - - byte txf_levl; - byte rxf_levl; - byte fifocfg; - byte prog_out; - - byte unused1; - byte DeltaIPEdgeNoSense; - byte DeltaIPConfig_Mask; - byte DeltaIP_SyncIP; - uint16 intMask; - uint16 intStatus; -#define TXUNDERR 0x0002 -#define TXOVFERR 0x0004 -#define TXFIFOEMT 0x0020 -#define RXOVFERR 0x0080 -#define RXFIFONE 0x0800 -#define RXFRAMERR 0x1000 -#define RXPARERR 0x2000 -#define RXBRK 0x4000 - - uint16 unused2; - uint16 Data; - uint32 unused3; - uint32 unused4; -} Uart; - -#define UART_BASE 0xfffe0300 -#define UART ((volatile Uart * const) UART_BASE) - -typedef struct GpioControl { - uint16 unused0; - byte unused1; - byte TBusSel; - - uint16 unused2; - uint16 GPIODir; - byte unused3; - byte Leds; - uint16 GPIOio; - - uint32 UartCtl; -} GpioControl; - -#define GPIO_BASE 0xfffe0400 -#define GPIO ((volatile GpioControl * const) GPIO_BASE) - -#define GPIO_NUM_MAX_BITS_MASK 0x0f -#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) - - -#endif - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_intr.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_intr.h deleted file mode 100644 index da3ee9fc3..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_intr.h +++ /dev/null @@ -1,74 +0,0 @@ -/* -<:copyright-gpl - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __6348_INTR_H -#define __6348_INTR_H - - -/*=====================================================================*/ -/* BCM6348 External Interrupt Level Assignments */ -/*=====================================================================*/ -#define INTERRUPT_ID_EXTERNAL_0 3 -#define INTERRUPT_ID_EXTERNAL_1 4 -#define INTERRUPT_ID_EXTERNAL_2 5 -#define INTERRUPT_ID_EXTERNAL_3 6 - -/*=====================================================================*/ -/* BCM6348 Timer Interrupt Level Assignments */ -/*=====================================================================*/ -#define MIPS_TIMER_INT 7 - -/*=====================================================================*/ -/* Peripheral ISR Table Offset */ -/*=====================================================================*/ -#define INTERNAL_ISR_TABLE_OFFSET 8 - -/*=====================================================================*/ -/* Logical Peripheral Interrupt IDs */ -/*=====================================================================*/ - -#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) -#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) -#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) -#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) -#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) -#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) -#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) -#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) -#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) -#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) -#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) -#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) -#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) -#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) -#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) -#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) -#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) - - -#endif /* __BCM6348_H */ - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_map_part.h deleted file mode 100644 index 199ef9e15..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_map_part.h +++ /dev/null @@ -1,500 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM6348_MAP_H -#define __BCM6348_MAP_H - -#include "bcmtypes.h" - -#define PERF_BASE 0xfffe0000 -#define TIMR_BASE 0xfffe0200 -#define UART_BASE 0xfffe0300 -#define GPIO_BASE 0xfffe0400 -#define MPI_BASE 0xfffe2000 /* MPI control registers */ -#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ -#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ - -typedef struct PerfControl { - uint32 RevID; - uint16 testControl; - uint16 blkEnables; -#define EMAC_CLK_EN 0x0010 -#define SAR_CLK_EN 0x0020 -#define USBS_CLK_EN 0x0040 -#define USBH_CLK_EN 0x0100 - - uint32 pll_control; -#define SOFT_RESET 0x00000001 - - uint32 IrqMask; - uint32 IrqStatus; - - uint32 ExtIrqCfg; -#define EI_SENSE_SHFT 0 -#define EI_STATUS_SHFT 5 -#define EI_CLEAR_SHFT 10 -#define EI_MASK_SHFT 15 -#define EI_INSENS_SHFT 20 -#define EI_LEVEL_SHFT 25 - - uint32 unused[4]; /* (18) */ - uint32 BlockSoftReset; /* (28) */ -#define BSR_SPI 0x00000001 -#define BSR_EMAC 0x00000004 -#define BSR_USBH 0x00000008 -#define BSR_USBS 0x00000010 -#define BSR_ADSL 0x00000020 -#define BSR_DMAMEM 0x00000040 -#define BSR_SAR 0x00000080 -#define BSR_ACLC 0x00000100 -#define BSR_ADSL_MIPS_PLL 0x00000400 -#define BSR_ALL_BLOCKS \ - (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ - BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) - uint32 unused2[2]; /* (2c) */ - uint32 PllStrap; /* (34) */ -#define PLL_N1_SHFT 20 -#define PLL_N1_MASK (7<<PLL_N1_SHFT) -#define PLL_N2_SHFT 15 -#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT) -#define PLL_M1_REF_SHFT 12 -#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT) -#define PLL_M2_REF_SHFT 9 -#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT) -#define PLL_M1_CPU_SHFT 6 -#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT) -#define PLL_M1_BUS_SHFT 3 -#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT) -#define PLL_M2_BUS_SHFT 0 -#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT) -} PerfControl; - -#define PERF ((volatile PerfControl * const) PERF_BASE) - -typedef struct Timer { - uint16 unused0; - byte TimerMask; -#define TIMER0EN 0x01 -#define TIMER1EN 0x02 -#define TIMER2EN 0x04 - byte TimerInts; -#define TIMER0 0x01 -#define TIMER1 0x02 -#define TIMER2 0x04 -#define WATCHDOG 0x08 - uint32 TimerCtl0; - uint32 TimerCtl1; - uint32 TimerCtl2; -#define TIMERENABLE 0x80000000 -#define RSTCNTCLR 0x40000000 - uint32 TimerCnt0; - uint32 TimerCnt1; - uint32 TimerCnt2; - uint32 WatchDogDefCount; - - /* Write 0xff00 0x00ff to Start timer - * Write 0xee00 0x00ee to Stop and re-load default count - * Read from this register returns current watch dog count - */ - uint32 WatchDogCtl; - - /* Number of 40-MHz ticks for WD Reset pulse to last */ - uint32 WDResetCount; -} Timer; - -#define TIMER ((volatile Timer * const) TIMR_BASE) - -typedef struct UartChannel { - byte unused0; - byte control; -#define BRGEN 0x80 /* Control register bit defs */ -#define TXEN 0x40 -#define RXEN 0x20 -#define LOOPBK 0x10 -#define TXPARITYEN 0x08 -#define TXPARITYEVEN 0x04 -#define RXPARITYEN 0x02 -#define RXPARITYEVEN 0x01 - - byte config; -#define XMITBREAK 0x40 -#define BITS5SYM 0x00 -#define BITS6SYM 0x10 -#define BITS7SYM 0x20 -#define BITS8SYM 0x30 -#define ONESTOP 0x07 -#define TWOSTOP 0x0f - /* 4-LSBS represent STOP bits/char - * in 1/8 bit-time intervals. Zero - * represents 1/8 stop bit interval. - * Fifteen represents 2 stop bits. - */ - byte fifoctl; -#define RSTTXFIFOS 0x80 -#define RSTRXFIFOS 0x40 - /* 5-bit TimeoutCnt is in low bits of this register. - * This count represents the number of characters - * idle times before setting receive Irq when below threshold - */ - uint32 baudword; - /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate - */ - - byte txf_levl; /* Read-only fifo depth */ - byte rxf_levl; /* Read-only fifo depth */ - byte fifocfg; /* Upper 4-bits are TxThresh, Lower are - * RxThreshold. Irq can be asserted - * when rx fifo> thresh, txfifo<thresh - */ - byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) - * if these bits are also enabled to GPIO_o - */ -#define DTREN 0x01 -#define RTSEN 0x02 - - byte unused1; - byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to - * detect irq on rising AND falling - * edges for corresponding GPIO_i - * if enabled (edge insensitive) - */ - byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense - * 0 for negedge sense if - * not configured for edge - * insensitive (see above) - * Lower 4 bits: Mask to enable change - * detection IRQ for corresponding - * GPIO_i - */ - byte DeltaIP_SyncIP; /* Upper 4 bits show which bits - * have changed (may set IRQ). - * read automatically clears bit - * Lower 4 bits are actual status - */ - - uint16 intMask; /* Same Bit defs for Mask and status */ - uint16 intStatus; -#define DELTAIP 0x0001 -#define TXUNDERR 0x0002 -#define TXOVFERR 0x0004 -#define TXFIFOTHOLD 0x0008 -#define TXREADLATCH 0x0010 -#define TXFIFOEMT 0x0020 -#define RXUNDERR 0x0040 -#define RXOVFERR 0x0080 -#define RXTIMEOUT 0x0100 -#define RXFIFOFULL 0x0200 -#define RXFIFOTHOLD 0x0400 -#define RXFIFONE 0x0800 -#define RXFRAMERR 0x1000 -#define RXPARERR 0x2000 -#define RXBRK 0x4000 - - uint16 unused2; - uint16 Data; /* Write to TX, Read from RX */ - /* bits 11:8 are BRK,PAR,FRM errors */ - - uint32 unused3; - uint32 unused4; -} Uart; - -#define UART ((volatile Uart * const) UART_BASE) - -typedef struct GpioControl { - uint32 GPIODir_high; /* bits 36:32 */ - uint32 GPIODir; /* bits 31:00 */ - uint32 GPIOio_high; /* bits 36:32 */ - uint32 GPIOio; /* bits 31:00 */ - uint32 LEDCtrl; -#define LED3_STROBE 0x08000000 -#define LED2_STROBE 0x04000000 -#define LED1_STROBE 0x02000000 -#define LED0_STROBE 0x01000000 -#define LED_TEST 0x00010000 -#define LED3_DISABLE_LINK_ACT 0x00008000 -#define LED2_DISABLE_LINK_ACT 0x00004000 -#define LED1_DISABLE_LINK_ACT 0x00002000 -#define LED0_DISABLE_LINK_ACT 0x00001000 -#define LED_INTERVAL_SET_MASK 0x00000f00 -#define LED_INTERVAL_SET_320MS 0x00000500 -#define LED_INTERVAL_SET_160MS 0x00000400 -#define LED_INTERVAL_SET_80MS 0x00000300 -#define LED_INTERVAL_SET_40MS 0x00000200 -#define LED_INTERVAL_SET_20MS 0x00000100 -#define LED3_ON 0x00000080 -#define LED2_ON 0x00000040 -#define LED1_ON 0x00000020 -#define LED0_ON 0x00000010 -#define LED3_ENABLE 0x00000008 -#define LED2_ENABLE 0x00000004 -#define LED1_ENABLE 0x00000002 -#define LED0_ENABLE 0x00000001 - uint32 SpiSlaveCfg; -#define SPI_SLAVE_RESET 0x00010000 -#define SPI_RESTRICT 0x00000400 -#define SPI_DELAY_DISABLE 0x00000200 -#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 -#define SPI_SER_ADDR_CFG_MASK 0x0000000c -#define SPI_MODE 0x00000001 - uint32 GPIOMode; -#define GROUP4_DIAG 0x00090000 -#define GROUP4_UTOPIA 0x00080000 -#define GROUP4_LEGACY_LED 0x00030000 -#define GROUP4_MII_SNOOP 0x00020000 -#define GROUP4_EXT_EPHY 0x00010000 -#define GROUP3_DIAG 0x00009000 -#define GROUP3_UTOPIA 0x00008000 -#define GROUP3_EXT_MII 0x00007000 -#define GROUP2_DIAG 0x00000900 -#define GROUP2_PCI 0x00000500 -#define GROUP1_DIAG 0x00000090 -#define GROUP1_UTOPIA 0x00000080 -#define GROUP1_SPI_UART 0x00000060 -#define GROUP1_SPI_MASTER 0x00000060 -#define GROUP1_MII_PCCARD 0x00000040 -#define GROUP1_MII_SNOOP 0x00000020 -#define GROUP1_EXT_EPHY 0x00000010 -#define GROUP0_DIAG 0x00000009 -#define GROUP0_EXT_MII 0x00000007 - -} GpioControl; - -#define GPIO ((volatile GpioControl * const) GPIO_BASE) - -/* Number to mask conversion macro used for GPIODir and GPIOio */ -#define GPIO_NUM_TOTAL_BITS_MASK 0x3f -#define GPIO_NUM_MAX_BITS_MASK 0x1f -#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) ) - -/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */ -#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07 -#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) - - -/* -** External Bus Interface -*/ -typedef struct EbiChipSelect { - uint32 base; /* base address in upper 24 bits */ -#define EBI_SIZE_8K 0 -#define EBI_SIZE_16K 1 -#define EBI_SIZE_32K 2 -#define EBI_SIZE_64K 3 -#define EBI_SIZE_128K 4 -#define EBI_SIZE_256K 5 -#define EBI_SIZE_512K 6 -#define EBI_SIZE_1M 7 -#define EBI_SIZE_2M 8 -#define EBI_SIZE_4M 9 -#define EBI_SIZE_8M 10 -#define EBI_SIZE_16M 11 -#define EBI_SIZE_32M 12 -#define EBI_SIZE_64M 13 -#define EBI_SIZE_128M 14 -#define EBI_SIZE_256M 15 - uint32 config; -#define EBI_ENABLE 0x00000001 /* .. enable this range */ -#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -#define EBI_WREN 0x00000020 /* enable posted writes */ -#define EBI_POLARITY 0x00000040 /* .. set to invert something, - ** don't know what yet */ -#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -#define EBI_FIFO 0x00000200 /* .. use fifo */ -#define EBI_RE 0x00000400 /* .. Reverse Endian */ -} EbiChipSelect; - -typedef struct MpiRegisters { - EbiChipSelect cs[7]; /* size chip select configuration */ -#define EBI_CS0_BASE 0 -#define EBI_CS1_BASE 1 -#define EBI_CS2_BASE 2 -#define EBI_CS3_BASE 3 -#define PCMCIA_COMMON_BASE 4 -#define PCMCIA_ATTRIBUTE_BASE 5 -#define PCMCIA_IO_BASE 6 - uint32 unused0[2]; /* reserved */ - uint32 ebi_control; /* ebi control */ - uint32 unused1[4]; /* reserved */ -#define EBI_ACCESS_TIMEOUT 0x000007FF - uint32 pcmcia_cntl1; /* pcmcia control 1 */ -#define PCCARD_CARD_RESET 0x00040000 -#define CARDBUS_ENABLE 0x00008000 -#define PCMCIA_ENABLE 0x00004000 -#define PCMCIA_GPIO_ENABLE 0x00002000 -#define CARDBUS_IDSEL 0x00001F00 -#define VS2_OEN 0x00000080 -#define VS1_OEN 0x00000040 -#define VS2_OUT 0x00000020 -#define VS1_OUT 0x00000010 -#define VS2_IN 0x00000008 -#define VS1_IN 0x00000004 -#define CD2_IN 0x00000002 -#define CD1_IN 0x00000001 -#define VS_MASK 0x0000000C -#define CD_MASK 0x00000003 - uint32 unused2; /* reserved */ - uint32 pcmcia_cntl2; /* pcmcia control 2 */ -#define PCMCIA_BYTESWAP_DIS 0x00000002 -#define PCMCIA_HALFWORD_EN 0x00000001 -#define RW_ACTIVE_CNT_BIT 2 -#define INACTIVE_CNT_BIT 8 -#define CE_SETUP_CNT_BIT 16 -#define CE_HOLD_CNT_BIT 24 - uint32 unused3[40]; /* reserved */ - - uint32 sp0range; /* PCI to internal system bus address space */ - uint32 sp0remap; - uint32 sp0cfg; - uint32 sp1range; - uint32 sp1remap; - uint32 sp1cfg; - - uint32 EndianCfg; - - uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ -#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ -#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ -#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ -#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ -#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ -#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ - - uint32 l2pmrange1; /* internal system bus to PCI memory space */ -#define PCI_SIZE_64K 0xFFFF0000 -#define PCI_SIZE_128K 0xFFFE0000 -#define PCI_SIZE_256K 0xFFFC0000 -#define PCI_SIZE_512K 0xFFF80000 -#define PCI_SIZE_1M 0xFFF00000 -#define PCI_SIZE_2M 0xFFE00000 -#define PCI_SIZE_4M 0xFFC00000 -#define PCI_SIZE_8M 0xFF800000 -#define PCI_SIZE_16M 0xFF000000 -#define PCI_SIZE_32M 0xFE000000 - uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ - uint32 l2pmremap1; -#define CARDBUS_MEM 0x00000004 -#define MEM_WINDOW_EN 0x00000001 - uint32 l2pmrange2; - uint32 l2pmbase2; - uint32 l2pmremap2; - uint32 l2piorange; /* internal system bus to PCI I/O space */ - uint32 l2piobase; - uint32 l2pioremap; - - uint32 pcimodesel; -#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 -#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ -#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ - - uint32 pciintstat; /* PCI interrupt mask/status */ -#define MAILBOX1_SENT 0x08 -#define MAILBOX0_SENT 0x04 -#define MAILBOX1_MSG_RCV 0x02 -#define MAILBOX0_MSG_RCV 0x01 - uint32 locbuscntrl; /* internal system bus control */ -#define DIR_U2P_NOSWAP 0x00000002 -#define EN_PCI_GPIO 0x00000001 - uint32 locintstat; /* internal system bus interrupt mask/status */ -#define CSERR 0x0200 -#define SERR 0x0100 -#define EXT_PCI_INT 0x0080 -#define DIR_FAILED 0x0040 -#define DIR_COMPLETE 0x0020 -#define PCI_CFG 0x0010 - uint32 unused5[7]; - - uint32 mailbox0; - uint32 mailbox1; - - uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ -#define PCI_CFG_REG_WRITE_EN 0x00000080 -#define PCI_CFG_ADDR 0x0000003C - uint32 pcicfgdata; /* internal system bus PCI configuration data */ - - uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ -#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ -#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ -#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ -#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ - uint32 locch2intStat; -#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ -#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ -#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ - uint32 locch2intMask; - uint32 unused6; - uint32 locch2descaddr; - uint32 locch2status1; -#define LOCAL_DESC_STATE 0xE0000000 -#define PCI_DESC_STATE 0x1C000000 -#define BYTE_DONE 0x03FFC000 -#define RING_ADDR 0x00003FFF - uint32 locch2status2; -#define BUFPTR_OFFSET 0x1FFF0000 -#define PCI_MASTER_STATE 0x000000C0 -#define LOC_MASTER_STATE 0x00000038 -#define CONTROL_STATE 0x00000007 - uint32 unused7; - - uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ -#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ -#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ - uint32 locch1intstat; - uint32 locch1intmask; - uint32 unused8; - uint32 locch1descaddr; - uint32 locch1status1; - uint32 locch1status2; - uint32 unused9; - - uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ - uint32 pcich1intstat; - uint32 pcich1intmask; - uint32 pcich1descaddr; - uint32 pcich1status1; - uint32 pcich1status2; - - uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ - uint32 pcich2intstat; - uint32 pcich2intmask; - uint32 pcich2descaddr; - uint32 pcich2status1; - uint32 pcich2status2; - - uint32 perm_id; /* permanent device and vendor id */ - uint32 perm_rev; /* permanent revision id */ -} MpiRegisters; - -#define MPI ((volatile MpiRegisters * const) MPI_BASE) - -/* PCI configuration address space start offset 0x40 */ -#define BRCM_PCI_CONFIG_TIMER 0x40 -#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 -#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF - -/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ -#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ -#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ - -#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) - -#endif - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmTag.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmTag.h deleted file mode 100644 index e902e96aa..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmTag.h +++ /dev/null @@ -1,153 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ -//************************************************************************************** -// File Name : bcmTag.h -// -// Description: add tag with validation system to the firmware image file to be uploaded -// via http -// -// Created : 02/28/2002 seanl -//************************************************************************************** - -#ifndef _BCMTAG_H_ -#define _BCMTAG_H_ - - -#define BCM_SIG_1 "Broadcom Corporation" -#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. - -#define BCM_TAG_VER "6" -#define BCM_TAG_VER_LAST "26" - -// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars -#define TAG_LEN 256 -#define TAG_VER_LEN 4 -#define SIG_LEN 20 -#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID -#define CHIP_ID_LEN 6 -#define IMAGE_LEN 10 -#define ADDRESS_LEN 12 -#define FLAG_LEN 2 -#define TOKEN_LEN 20 -#define BOARD_ID_LEN 16 -#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ - (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) - - -// TAG for downloadable image (kernel plus file system) -typedef struct _FILE_TAG -{ - unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. - unsigned char signiture_1[SIG_LEN]; // text line for company info - unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) - unsigned char chipId[CHIP_ID_LEN]; // chip id - unsigned char boardId[BOARD_ID_LEN]; // board id - unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host - unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length - unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address - unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. - unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address - unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. - unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address - unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. - unsigned char dualImage[FLAG_LEN]; // if 1, dual image - unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active - unsigned char reserved[RESERVED_LEN]; // reserved for later use - unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for - // now will be 4 unsigned char crc - unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) -} FILE_TAG, *PFILE_TAG; - -#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -#define CRC_LEN 4 - -// only included if for bcmTag.exe program -#ifdef BCMTAG_EXE_USE - -static unsigned long Crc32_table[256] = { - 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, - 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, - 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, - 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, - 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, - 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, - 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, - 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, - 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, - 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, - 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, - 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, - 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, - 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, - 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, - 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, - 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, - 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, - 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, - 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, - 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, - 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, - 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, - 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, - 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, - 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, - 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, - 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, - 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, - 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, - 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, - 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, - 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, - 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, - 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, - 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, - 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, - 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, - 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, - 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, - 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, - 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, - 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, - 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, - 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, - 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, - 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, - 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, - 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, - 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, - 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, - 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, - 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, - 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, - 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, - 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, - 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, - 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, - 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, - 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, - 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, - 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, - 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, - 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -}; -#endif // BCMTAG_USE - - -#endif // _BCMTAG_H_ - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_intr.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_intr.h deleted file mode 100644 index 8c56840f4..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_intr.h +++ /dev/null @@ -1,59 +0,0 @@ -/* -<:copyright-gpl - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM_INTR_H -#define __BCM_INTR_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(CONFIG_BCM96338) -#include <6338_intr.h> -#endif -#if defined(CONFIG_BCM96345) -#include <6345_intr.h> -#endif -#if defined(CONFIG_BCM96348) -#include <6348_intr.h> -#endif - -/* defines */ -struct pt_regs; -typedef int (*FN_HANDLER) (int, void *); - -/* prototypes */ -extern void enable_brcm_irq(unsigned int irq); -extern void disable_brcm_irq(unsigned int irq); -extern int request_external_irq(unsigned int irq, - FN_HANDLER handler, unsigned long irqflags, - const char * devname, void *dev_id); -extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, - unsigned int interruptId); -extern void dump_intr_regs(void); - -/* compatibility definitions */ -#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) -#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h deleted file mode 100644 index ccfe965dc..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h +++ /dev/null @@ -1,34 +0,0 @@ -/* -<:copyright-gpl - Copyright 2004 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM_MAP_PART_H -#define __BCM_MAP_PART_H - -#if defined(CONFIG_BCM96338) -#include <6338_map_part.h> -#endif -#if defined(CONFIG_BCM96345) -#include <6345_map_part.h> -#endif -#if defined(CONFIG_BCM96348) -#include <6348_map_part.h> -#endif - -#endif - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmpci.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmpci.h deleted file mode 100644 index cecbd995a..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmpci.h +++ /dev/null @@ -1,87 +0,0 @@ -/* -<:copyright-gpl - Copyright 2004 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -// -// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition -// -#ifndef BCMPCI_H -#define BCMPCI_H - -/* Memory window in internal system bus address space */ -#define BCM_PCI_MEM_BASE 0x08000000 -/* IO window in internal system bus address space */ -#define BCM_PCI_IO_BASE 0x0C000000 - -#define BCM_PCI_ADDR_MASK 0x1fffffff - -/* Memory window size (range) */ -#define BCM_PCI_MEM_SIZE_16MB 0x01000000 -/* IO window size (range) */ -#define BCM_PCI_IO_SIZE_64KB 0x00010000 - -/* PCI Configuration and I/O space acesss */ -#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) - -/* fake USB PCI slot */ -#define USB_HOST_SLOT 9 -#define USB_BAR0_MEM_SIZE 0x0800 - -#define BCM_HOST_MEM_SPACE1 0x10000000 -#define BCM_HOST_MEM_SPACE2 0x00000000 - -/* - * EBI bus clock is 33MHz and share with PCI bus - * each clock cycle is 30ns. - */ -/* attribute memory access wait cnt for 4306 */ -#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns -#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns -#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) -#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns - -/* common memory access wait cnt for 4306 */ -#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns -#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns -#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) -#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns - -#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also -#define PCCARD_VCC_33V 0x00010000 -#define PCCARD_VCC_50V 0x00020000 - -typedef enum { - MPI_CARDTYPE_NONE, // No Card in slot - MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot - MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot -} CardType; - -#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus - -#define pcmciaAttrOffset 0x00200000 -#define pcmciaMemOffset 0x00000000 -// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. -#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) -// Base Address is that mapped into the MPI ChipSelect registers. -// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. -#define pcmciaBase 0xbf000000 -#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) -#define pcmciaMem (pcmciaMemOffset | pcmciaBase) -#define pcmciaIo (pcmciaIoOffset | pcmciaBase) - -#endif diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmtypes.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmtypes.h deleted file mode 100644 index 43aebc9c0..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmtypes.h +++ /dev/null @@ -1,160 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -// -// bcmtypes.h - misc useful typedefs -// -#ifndef BCMTYPES_H -#define BCMTYPES_H - -// These are also defined in typedefs.h in the application area, so I need to -// protect against re-definition. - -#ifndef _TYPEDEFS_H_ -typedef unsigned char uint8; -typedef unsigned short uint16; -typedef unsigned long uint32; -typedef signed char int8; -typedef signed short int16; -typedef signed long int32; -#endif - -typedef unsigned char byte; -// typedef unsigned long sem_t; - -typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; -typedef signed long LONG,*PLONG; - -typedef unsigned int *PUINT; -typedef signed int INT; - -typedef unsigned short *PUSHORT; -typedef signed short SHORT,*PSHORT; -typedef unsigned short WORD,*PWORD; - -typedef unsigned char *PUCHAR; -typedef signed char *PCHAR; - -typedef void *PVOID; - -typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; - -typedef unsigned char BYTE,*PBYTE; - -//#ifndef __GNUC__ -//The following has been defined in Vxworks internally: vxTypesOld.h -//redefine under vxworks will cause error -typedef signed int *PINT; - -typedef signed char INT8; -typedef signed short INT16; -typedef signed long INT32; - -typedef unsigned char UINT8; -typedef unsigned short UINT16; -typedef unsigned long UINT32; - -typedef unsigned char UCHAR; -typedef unsigned short USHORT; -typedef unsigned int UINT; -typedef unsigned long ULONG; - -typedef void VOID; -typedef unsigned char BOOL; - -//#endif /* __GNUC__ */ - - -// These are also defined in typedefs.h in the application area, so I need to -// protect against re-definition. -#ifndef TYPEDEFS_H - -// Maximum and minimum values for a signed 16 bit integer. -#define MAX_INT16 32767 -#define MIN_INT16 -32768 - -// Useful for true/false return values. This uses the -// Taligent notation (k for constant). -typedef enum -{ - kFalse = 0, - kTrue = 1 -} Bool; - -#endif - -/* macros to protect against unaligned accesses */ - -#if 0 -/* first arg is an address, second is a value */ -#define PUT16( a, d ) { \ - *((byte *)a) = (byte)((d)>>8); \ - *(((byte *)a)+1) = (byte)(d); \ -} - -#define PUT32( a, d ) { \ - *((byte *)a) = (byte)((d)>>24); \ - *(((byte *)a)+1) = (byte)((d)>>16); \ - *(((byte *)a)+2) = (byte)((d)>>8); \ - *(((byte *)a)+3) = (byte)(d); \ -} - -/* first arg is an address, returns a value */ -#define GET16( a ) ( \ - (*((byte *)a) << 8) | \ - (*(((byte *)a)+1)) \ -) - -#define GET32( a ) ( \ - (*((byte *)a) << 24) | \ - (*(((byte *)a)+1) << 16) | \ - (*(((byte *)a)+2) << 8) | \ - (*(((byte *)a)+3)) \ -) -#endif - -#ifndef YES -#define YES 1 -#endif - -#ifndef NO -#define NO 0 -#endif - -#ifndef IN -#define IN -#endif - -#ifndef OUT -#define OUT -#endif - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) -#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) -#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) - -#endif diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/board.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/board.h deleted file mode 100644 index e674cb10d..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/board.h +++ /dev/null @@ -1,373 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ -/***********************************************************************/ -/* */ -/* MODULE: board.h */ -/* DATE: 97/02/18 */ -/* PURPOSE: Board specific information. This module should include */ -/* all base device addresses and board specific macros. */ -/* */ -/***********************************************************************/ -#ifndef _BOARD_H -#define _BOARD_H - -/*****************************************************************************/ -/* Misc board definitions */ -/*****************************************************************************/ - -#define DYING_GASP_API - -/*****************************************************************************/ -/* Physical Memory Map */ -/*****************************************************************************/ - -#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ -#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ - -/*****************************************************************************/ -/* Note that the addresses above are physical addresses and that programs */ -/* have to use converted addresses defined below: */ -/*****************************************************************************/ -#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ - -/*****************************************************************************/ -/* Select the PLL value to get the desired CPU clock frequency. */ -/* */ -/* */ -/*****************************************************************************/ -#define FPERIPH 50000000 - -#define ONEK 1024 -#define BLK64K (64*ONEK) -#define FLASH45_BLKS_BOOT_ROM 1 -#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) -#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ - -/*****************************************************************************/ -/* Note that the addresses above are physical addresses and that programs */ -/* have to use converted addresses defined below: */ -/*****************************************************************************/ -#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ - -/*****************************************************************************/ -/* Select the PLL value to get the desired CPU clock frequency. */ -/* */ -/* */ -/*****************************************************************************/ -#define FPERIPH 50000000 - -#define SDRAM_TYPE_ADDRESS_OFFSET 16 -#define NVRAM_DATA_OFFSET 0x0580 -#define NVRAM_DATA_ID 0x0f1e2d3c -#define BOARD_SDRAM_TYPE *(unsigned long *) \ - (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) - -#define ONEK 1024 -#define BLK64K (64*ONEK) - -// nvram and psi flash definitions for 45 -#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram -#define NVRAM_PSI_DEFAULT 24 // default psi in K byes - -/*****************************************************************************/ -/* NVRAM Offset and definition */ -/*****************************************************************************/ - -#define NVRAM_VERSION_NUMBER 2 -#define NVRAM_VERSION_NUMBER_ADDRESS 0 - -#define NVRAM_BOOTLINE_LEN 256 -#define NVRAM_BOARD_ID_STRING_LEN 16 -#define NVRAM_MAC_ADDRESS_LEN 6 -#define NVRAM_MAC_COUNT_MAX 32 - -/*****************************************************************************/ -/* Misc Offsets */ -/*****************************************************************************/ - -#define CFE_VERSION_OFFSET 0x0570 -#define CFE_VERSION_MARK_SIZE 5 -#define CFE_VERSION_SIZE 5 - -typedef struct -{ - unsigned long ulVersion; - char szBootline[NVRAM_BOOTLINE_LEN]; - char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; - unsigned long ulReserved1[2]; - unsigned long ulNumMacAddrs; - unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; - char chReserved[2]; - unsigned long ulCheckSum; -} NVRAM_DATA, *PNVRAM_DATA; - - -/*****************************************************************************/ -/* board ioctl calls for flash, led and some other utilities */ -/*****************************************************************************/ - - -/* Defines. for board driver */ -#define BOARD_IOCTL_MAGIC 'B' -#define BOARD_DRV_MAJOR 206 - -#define MAC_ADDRESS_ANY (unsigned long) -1 - -#define BOARD_IOCTL_FLASH_INIT \ - _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_FLASH_WRITE \ - _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_FLASH_READ \ - _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_NR_PAGES \ - _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_DUMP_ADDR \ - _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_MEMORY \ - _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_MIPS_SOFT_RESET \ - _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_LED_CTRL \ - _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_ID \ - _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_MAC_ADDRESS \ - _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ - _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_PSI_SIZE \ - _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_SDRAM_SIZE \ - _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_MONITOR_FD \ - _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ - _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_BOOTLINE \ - _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_BOOTLINE \ - _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ - _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_CHIP_ID \ - _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_NUM_ENET \ - _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_CFE_VER \ - _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_ENET_CFG \ - _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ - _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_TRIGGER_EVENT \ - _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_TRIGGER_EVENT \ - _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ - _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_SES_LED \ - _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) - -//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12 -#define RESET_BUTTON_UP 1 -#define RESET_BUTTON_PRESSDOWN 0 -#define BOARD_IOCTL_GET_RESETHOLD \ - _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS) -//>>JUNHON, 2004/09/15 - -// for the action in BOARD_IOCTL_PARMS for flash operation -typedef enum -{ - PERSISTENT, - NVRAM, - BCM_IMAGE_CFE, - BCM_IMAGE_FS, - BCM_IMAGE_KERNEL, - BCM_IMAGE_WHOLE, - SCRATCH_PAD, - FLASH_SIZE, -} BOARD_IOCTL_ACTION; - - -typedef struct boardIoctParms -{ - char *string; - char *buf; - int strLen; - int offset; - BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ - int result; -} BOARD_IOCTL_PARMS; - - -// LED defines -typedef enum -{ - kLedAdsl, - kLedWireless, - kLedUsb, - kLedHpna, - kLedWanData, - kLedPPP, - kLedVoip, - kLedSes, - kLedLan, - kLedSelfTest, - kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. -} BOARD_LED_NAME; - -typedef enum -{ - kLedStateOff, /* turn led off */ - kLedStateOn, /* turn led on */ - kLedStateFail, /* turn led on red */ - kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ - kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ - kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ -} BOARD_LED_STATE; - - -// virtual and physical map pair defined in board.c -typedef struct ledmappair -{ - BOARD_LED_NAME ledName; // virtual led name - BOARD_LED_STATE ledInitState; // initial led state when the board boots. - unsigned short ledMask; // physical GPIO pin mask - unsigned short ledActiveLow; // reset bit to turn on LED - unsigned short ledMaskFail; // physical GPIO pin mask for state failure - unsigned short ledActiveLowFail;// reset bit to turn on LED -} LED_MAP_PAIR, *PLED_MAP_PAIR; - -typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); - -/* Flash storage address information that is determined by the flash driver. */ -typedef struct flashaddrinfo -{ - int flash_persistent_start_blk; - int flash_persistent_number_blk; - int flash_persistent_length; - unsigned long flash_persistent_blk_offset; - int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) - int flash_scratch_pad_number_blk; - int flash_scratch_pad_length; - unsigned long flash_scratch_pad_blk_offset; - int flash_nvram_start_blk; - int flash_nvram_number_blk; - int flash_nvram_length; - unsigned long flash_nvram_blk_offset; -} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; - -// scratch pad defines -/* SP - Persisten Scratch Pad format: - sp header : 32 bytes - tokenId-1 : 8 bytes - tokenId-1 len : 4 bytes - tokenId-1 data - .... - tokenId-n : 8 bytes - tokenId-n len : 4 bytes - tokenId-n data -*/ - -#define MAGIC_NUM_LEN 8 -#define MAGIC_NUMBER "gOGoBrCm" -#define TOKEN_NAME_LEN 16 -#define SP_VERSION 1 -#define SP_MAX_LEN 8 * 1024 // 8k buf before psi -#define SP_RESERVERD 16 - -typedef struct _SP_HEADER -{ - char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number - int SPVersion; // version number - int SPUsedLen; // used sp len - char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes -} SP_HEADER, *PSP_HEADER; - -typedef struct _TOKEN_DEF -{ - char tokenName[TOKEN_NAME_LEN]; - int tokenLen; -} SP_TOKEN, *PSP_TOKEN; - - -/*****************************************************************************/ -/* Function Prototypes */ -/*****************************************************************************/ -#if !defined(__ASM_ASM_H) -void dumpaddr( unsigned char *pAddr, int nLen ); - -int kerSysNvRamGet(char *string, int strLen, int offset); -int kerSysNvRamSet(char *string, int strLen, int offset); -int kerSysPersistentGet(char *string, int strLen, int offset); -int kerSysPersistentSet(char *string, int strLen, int offset); -int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); -int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); -int kerSysBcmImageSet( int flash_start_addr, char *string, int size); -int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); -int kerSysReleaseMacAddress( unsigned char *pucaAddr ); -int kerSysGetSdramSize( void ); -void kerSysGetBootline(char *string, int strLen); -void kerSysSetBootline(char *string, int strLen); -void kerSysMipsSoftReset(void); -void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); -int kerSysFlashSizeGet(void); -void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); -void kerSysDeregisterDyingGaspHandler(char *devname); -void kerSysWakeupMonitorTask( void ); -#endif - -#define BOOT_CFE 0 -#define BOOT_REDBOOT 1 - -extern int boot_loader_type; - -#endif /* _BOARD_H */ - diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bootloaders.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bootloaders.h deleted file mode 100644 index e169bb00c..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bootloaders.h +++ /dev/null @@ -1,7 +0,0 @@ -#define ADSL_SDRAM_IMAGE_SIZE (384*1024) - -#define BOOT_LOADER_UNKNOWN 0 -#define BOOT_LOADER_CFE 1 -#define BOOT_LOADER_REDBOOT 2 -#define BOOT_LOADER_CFE2 3 -#define BOOT_LOADER_LAST 3 diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h deleted file mode 100644 index ea9b3587a..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_tlb 1 -#define cpu_has_4kex 4 -#define cpu_has_4ktlb 8 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 0x40 -#define cpu_has_watch 0 -#define cpu_has_mips16 0 -#define cpu_has_divec 0x200 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 0x40000 -#define cpu_has_mcheck 0x2000 -#define cpu_has_ejtag 0x4000 -#define cpu_has_llsc 0x10000 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -#define cpu_has_subset_pcaches 0 - -#define cpu_dcache_line_size() 16 -#define cpu_icache_line_size() 16 -#define cpu_scache_line_size() 0 - -#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/war.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/war.h deleted file mode 100644 index 0f09a31e6..000000000 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_BCM963XX_WAR_H -#define __ASM_MIPS_MACH_BCM963XX_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_BCM963XX_WAR_H */ |