Delete old brcm63xx files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13210 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 0 insertions, 435 deletions

diff --git a/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm96348.c b/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm96348.c
deleted file mode 100644
index e3703a94c..000000000
--- a/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm96348.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <bcmpci.h>
-#include <bcm_intr.h>
-#include <bcm_map_part.h>
-#include <6348_intr.h>
-#include <6348_map_part.h>
-
-static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
-
-static char irq_tab_bcm96348[] __initdata = {
-    [0] = INTERRUPT_ID_MPI,
-    [1] = INTERRUPT_ID_MPI,
-#if defined(CONFIG_USB)
-    [USB_HOST_SLOT] = INTERRUPT_ID_USBH
-#endif
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-    return irq_tab_bcm96348[slot];
-}
-
-static void bcm96348_fixup(struct pci_dev *dev)
-{
-    uint32 memaddr;
-    uint32 size;
-
-    memaddr = pci_resource_start(dev, 0);
-    size = pci_resource_len(dev, 0);
-
-    switch (PCI_SLOT(dev->devfn)) {
-        case 0:
-            // UBUS to PCI address range
-            // Memory Window 1. Mask determines which bits are decoded.
-            mpi->l2pmrange1 = ~(size-1);
-            // UBUS to PCI Memory base address. This is akin to the ChipSelect base
-            // register.
-            mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK;
-            // UBUS to PCI Remap Address. Replaces the masked address bits in the
-            // range register with this setting.
-            // Also, enable direct I/O and direct Memory accesses
-            mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN);
-            break;
-
-        case 1:
-            // Memory Window 2
-            mpi->l2pmrange2 = ~(size-1);
-            // UBUS to PCI Memory base address.
-            mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK;
-            // UBUS to PCI Remap Address
-            mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN);
-            break;
-
-#if defined(CONFIG_USB)
-        case USB_HOST_SLOT:
-            dev->resource[0].start = USB_HOST_BASE;
-            dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1;
-            break;
-#endif
-    }
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-        return 0;
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_ANY_ID,
-          bcm96348_fixup);
-
-/*struct pci_fixup pcibios_fixups[] = {
-    { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup },
-    {0}
-};*/
diff --git a/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm96348.c b/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm96348.c
deleted file mode 100644
index ee1647121..000000000
--- a/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm96348.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/addrspace.h>
-
-#include <bcm_intr.h>
-#include <bcm_map_part.h>
-#include <6348_intr.h>
-#include <6348_map_part.h>
-#include <bcmpci.h>
-
-#include <linux/delay.h>
-
-#if defined(CONFIG_USB)
-#if 0
-#define DPRINT(x...)        printk(x)
-#else
-#define DPRINT(x...)
-#endif
-
-static int 
-pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size);
-static int 
-pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size);
-
-static bool usb_mem_size_rd = FALSE;
-static uint32 usb_mem_base = 0;
-static uint32 usb_cfg_space_cmd_reg = 0;
-#endif
-static bool pci_mem_size_rd = FALSE;
-
-static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
-
-static void mpi_SetupPciConfigAccess(uint32 addr)
-{
-    mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE;
-}
-
-static void mpi_ClearPciConfigAccess(void)
-{
-    mpi->l2pcfgctl = 0x00000000;
-}
-
-#if defined(CONFIG_USB)
-/* --------------------------------------------------------------------------
-    Name: pci63xx_int_write
-Abstract: PCI Config write on internal device(s)
- -------------------------------------------------------------------------- */
-static int 
-pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size)
-{
-    if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
-        return PCIBIOS_SUCCESSFUL;
-    }
-
-    switch (size) {
-        case 1:
-            DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            break;
-        case 2:
-            DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            switch (where) {
-                case PCI_COMMAND:
-                    usb_cfg_space_cmd_reg = *value;
-                    break;
-                default:
-                    break;
-            }
-            break;
-        case 4:
-            DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            switch (where) {
-                case PCI_BASE_ADDRESS_0:
-                    if (*value == 0xffffffff) {
-                        usb_mem_size_rd = TRUE;
-                    } else {
-                        usb_mem_base = *value;
-                    }
-                    break;
-                default:
-                    break;
-            }
-            break;
-        default:
-            break;
-    }
-
-    return PCIBIOS_SUCCESSFUL;
-}
-
-/* --------------------------------------------------------------------------
-    Name: pci63xx_int_read
-Abstract: PCI Config read on internal device(s)
- -------------------------------------------------------------------------- */
-static int 
-pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size)
-{
-    uint32 retValue = 0xFFFFFFFF;
-
-    if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
-        return PCIBIOS_SUCCESSFUL;
-    }
-
-    // For now, this is specific to the USB Host controller. We can
-    // make it more general if we have to...
-    // Emulate PCI Config accesses
-    switch (where) {
-        case PCI_VENDOR_ID:     
-        case PCI_DEVICE_ID:
-            retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000;
-            break;
-        case PCI_COMMAND:
-        case PCI_STATUS:
-            retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg;
-            break;
-        case PCI_CLASS_REVISION:
-        case PCI_CLASS_DEVICE:
-            retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01;
-            break;
-        case PCI_BASE_ADDRESS_0:
-            if (usb_mem_size_rd) {
-                retValue = USB_BAR0_MEM_SIZE;
-            } else {
-                if (usb_mem_base != 0)
-                    retValue = usb_mem_base;
-                else
-                    retValue = USB_HOST_BASE;
-            }
-            usb_mem_size_rd = FALSE;
-            break;
-        case PCI_CACHE_LINE_SIZE:
-        case PCI_LATENCY_TIMER:
-            retValue = 0;
-            break;
-        case PCI_HEADER_TYPE:
-            retValue = PCI_HEADER_TYPE_NORMAL;
-            break;
-        case PCI_SUBSYSTEM_VENDOR_ID:
-            retValue = PCI_VENDOR_ID_BROADCOM;
-            break;
-        case PCI_SUBSYSTEM_ID:
-            retValue = 0x6300;
-            break;
-        case PCI_INTERRUPT_LINE:
-            retValue = INTERRUPT_ID_USBH; 
-            break;
-        default:
-            break;
-    }
-
-    switch (size) {
-        case 1:
-            *value = (retValue >> ((where & 3) << 3)) & 0xff;
-            DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            break;
-        case 2:
-            *value = (retValue >> ((where & 3) << 3)) & 0xffff;
-            DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            break;
-        case 4:
-            *value = retValue;
-            DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            break;
-        default:
-            break;
-    }
-
-    return PCIBIOS_SUCCESSFUL;
-}
-#endif
-
-static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 * val)
-{
-    volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
-    uint32 data;
-
-#if defined(CONFIG_USB)
-    if (PCI_SLOT(devfn) == USB_HOST_SLOT)
-        return pci63xx_int_read(devfn, where, val, size);
-#endif
-
-    mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
-    data = *(uint32 *)ioBase;
-    switch(size) {
-        case 1:
-            *val = (data >> ((where & 3) << 3)) & 0xff;
-            break;
-        case 2:
-            *val = (data >> ((where & 3) << 3)) & 0xffff;
-            break;
-        case 4:
-            *val = data;
-             /* Special case for reading PCI device range */
-            if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
-                if (pci_mem_size_rd) {
-                    /* bcm6348 PCI memory window minimum size is 64K */
-                    *val &= PCI_SIZE_64K;
-                }
-            }
-            break;
-        default:
-            break;
-    }
-    pci_mem_size_rd = FALSE;
-    mpi_ClearPciConfigAccess();
-
-    return PCIBIOS_SUCCESSFUL;
-}
-
-static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 val)
-{
-    volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
-    uint32 data;
-
-#if defined(CONFIG_USB)
-    if (PCI_SLOT(devfn) == USB_HOST_SLOT)
-        return pci63xx_int_write(devfn, where, &val, size);
-#endif
-    mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
-    data = *(uint32 *)ioBase;
-    switch(size) {
-        case 1:
-            data = (data & ~(0xff << ((where & 3) << 3))) |
-                (val << ((where & 3) << 3));
-            break;
-        case 2:
-            data = (data & ~(0xffff << ((where & 3) << 3))) |
-                (val << ((where & 3) << 3));
-            break;
-        case 4:
-            data = val;
-            /* Special case for reading PCI device range */
-            if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
-                if (val == 0xffffffff)
-                    pci_mem_size_rd = TRUE;
-            }
-            break;
-        default:
-            break;
-    }
-    *(uint32 *)ioBase = data;
-    udelay(500);
-    mpi_ClearPciConfigAccess();
-
-    return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops bcm96348_pci_ops = {
-    .read   = bcm96348_pcibios_read,
-    .write  = bcm96348_pcibios_write
-};
diff --git a/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm96348.c b/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm96348.c
deleted file mode 100644
index bea3b7ba0..000000000
--- a/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm96348.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <bcmpci.h>
-
-static struct resource bcm_pci_io_resource = {
-	.name   = "bcm96348 pci IO space",
-	.start  = BCM_PCI_IO_BASE,
-	.end    = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1,
-	.flags  = IORESOURCE_IO
-};
-
-static struct resource bcm_pci_mem_resource = {
-	.name   = "bcm96348 pci memory space",
-	.start  = BCM_PCI_MEM_BASE,
-	.end    = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1,
-	.flags  = IORESOURCE_MEM
-};
-
-extern struct pci_ops bcm96348_pci_ops;
-
-struct pci_controller bcm96348_controller = {
-	.pci_ops   	= &bcm96348_pci_ops,
-	.io_resource	= &bcm_pci_io_resource,
-	.mem_resource	= &bcm_pci_mem_resource,
-};
-
-static __init int bcm96348_pci_init(void)
-{
-	/* Avoid ISA compat ranges.  */
-	PCIBIOS_MIN_IO = 0x00000000;
-	PCIBIOS_MIN_MEM = 0x00000000;
-
-	/* Set I/O resource limits.  */
-	ioport_resource.end = 0x1fffffff;
-	iomem_resource.end = 0xffffffff;
-
-	register_pci_controller(&bcm96348_controller);
-        return 0;
-}
-
-arch_initcall(bcm96348_pci_init);