strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 472 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/setup.c b/target/linux/brcm63xx/files/arch/mips/bcm963xx/setup.c
new file mode 100644
index 000000000..70c6ebe60
--- /dev/null
+++ b/target/linux/brcm63xx/files/arch/mips/bcm963xx/setup.c
@@ -0,0 +1,472 @@
+/*
+<:copyright-gpl 
+ Copyright 2002 Broadcom Corp. All Rights Reserved. 
+ 
+ This program is free software; you can distribute it and/or modify it 
+ under the terms of the GNU General Public License (Version 2) as 
+ published by the Free Software Foundation. 
+ 
+ This program is distributed in the hope it will be useful, but WITHOUT 
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
+ FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
+ for more details. 
+ 
+ You should have received a copy of the GNU General Public License along 
+ with this program; if not, write to the Free Software Foundation, Inc., 
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
+:>
+*/
+/*
+ * Generic setup routines for Broadcom 963xx MIPS boards
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/console.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bcache.h>
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/gdb-stub.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
+
+extern void brcm_time_init(void);
+extern int boot_loader_type;
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <bcm_map_part.h>
+#include <6348_map_part.h>
+#include <bcmpci.h>
+
+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
+
+/* This function should be in a board specific directory.  For now,
+ * assume that all boards that include this file use a Broadcom chip
+ * with a soft reset bit in the PLL control register.
+ */
+static void brcm_machine_restart(char *command)
+{
+	const unsigned long ulSoftReset = 0x00000001;
+	unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
+	*pulPllCtrl |= ulSoftReset;
+}
+
+static void brcm_machine_halt(void)
+{
+	printk("System halted\n");
+	while (1);
+}
+
+static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value)
+{
+    /* write index then value */
+    mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
+    mpi->pcicfgdata = value;
+}
+
+static uint32 mpi_GetLocalPciConfigReg(uint32 reg)
+{
+    /* write index then get value */
+    mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
+    return mpi->pcicfgdata;
+}
+
+/*
+ * mpi_ResetPcCard: Set/Reset the PcCard
+ */
+static void mpi_ResetPcCard(int cardtype, BOOL bReset)
+{
+    if (cardtype == MPI_CARDTYPE_NONE) {
+        return;
+    }
+
+    if (cardtype == MPI_CARDTYPE_CARDBUS) {
+        bReset = ! bReset;
+    }
+
+    if (bReset) {
+        mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
+    } else {
+        mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET);
+    }
+}
+
+/*
+ * mpi_ConfigCs: Configure an MPI/EBI chip select
+ */
+static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags)
+{
+    mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size);
+    mpi->cs[cs].config = flags;
+}
+
+/*
+ * mpi_InitPcmciaSpace
+ */
+static void mpi_InitPcmciaSpace(void)
+{
+    // ChipSelect 4 controls PCMCIA Memory accesses
+    mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
+    // ChipSelect 5 controls PCMCIA Attribute accesses
+    mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
+    // ChipSelect 6 controls PCMCIA I/O accesses
+    mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE));
+
+    mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | 
+                         (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | 
+                         (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | 
+                         (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT));
+
+    mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS);
+}
+
+/*
+ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection
+ * 
+ *   CD1#/      CD2#/     VS1#/     VS2#/    Card       Initial Vcc
+ *  CCD1#      CCD2#     CVS1      CVS2      Type
+ *
+ *   GND        GND       open      open     16-bit     5 vdc
+ *
+ *   GND        GND       GND       open     16-bit     3.3 vdc
+ *
+ *   GND        GND       open      GND      16-bit     x.x vdc
+ *
+ *   GND        GND       GND       GND      16-bit     3.3 & x.x vdc
+ *
+ *====================================================================
+ *
+ *   CVS1       GND       CCD1#     open     CardBus    3.3 vdc
+ *
+ *   GND        CVS2      open      CCD2#    CardBus    x.x vdc
+ *
+ *   GND        CVS1      CCD2#     open     CardBus    y.y vdc
+ *
+ *   GND        CVS2      GND       CCD2#    CardBus    3.3 & x.x vdc
+ *
+ *   CVS2       GND       open      CCD1#    CardBus    x.x & y.y vdc
+ *
+ *   GND        CVS1      CCD2#     open     CardBus    3.3, x.x & y.y vdc
+ *
+ */
+static int cardtype_vcc_detect(void)
+{
+    uint32 data32;
+    int cardtype;
+
+    cardtype = MPI_CARDTYPE_NONE;
+    mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive
+                                        // the CVS pins to 0.
+    data32 = mpi->pcmcia_cntl1;
+    switch (data32 & 0x00000003)  // Test CD1# and CD2#, see if card is plugged in.
+    {
+    case 0x00000003:  // No Card is in the slot.
+        printk("mpi: No Card is in the PCMCIA slot\n");
+        break;
+
+    case 0x00000002:  // Partial insertion, No CD2#.
+        printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n");
+        break;
+
+    case 0x00000001:  // Partial insertion, No CD1#.
+        printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n");
+        break;
+
+    case 0x00000000:
+        mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and
+                                        // float the CVS pins.
+        mdelay(1);
+        data32 = mpi->pcmcia_cntl1;
+        // Read the Register.
+        switch (data32 & 0x0000000C)  // See what is on the CVS pins.
+        {
+        case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option.
+            printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n");
+            cardtype = MPI_CARDTYPE_PCMCIA;
+            break;
+          
+        case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground.
+                         // 2 valid voltage options.
+        switch (data32 & 0x00000003)  // Test the values of CCD1 and CCD2.
+        {
+            case 0x00000003:  // CCD1 and CCD2 are tied to 1 of the CVS pins.
+                              // This is not a valid combination.
+                printk("mpi: Unknown card plugged into slot\n"); 
+                break;
+      
+            case 0x00000002:  // CCD2 is tied to either CVS1 or CVS2. 
+                mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0.
+                mdelay(1);
+                data32 = mpi->pcmcia_cntl1;
+                if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid.
+                    printk("mpi: Unknown card plugged into slot\n"); 
+                } else {                   // CCD2 is tied to CVS1.
+                    printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n");
+                    cardtype = MPI_CARDTYPE_CARDBUS;
+                }
+                break;
+                
+            case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
+                             // This is not a valid combination.
+                printk("mpi: Unknown card plugged into slot\n"); 
+                break;
+                
+            case 0x00000000:  // CCD1 and CCD2 are tied to ground.
+                printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n");
+                cardtype = MPI_CARDTYPE_PCMCIA;
+                break;
+            }
+            break;
+          
+        case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground.
+                         // 2 valid voltage options.
+            switch (data32 & 0x00000003)  // Test the values of CCD1 and CCD2.
+            {
+            case 0x00000003:  // CCD1 and CCD2 are tied to 1 of the CVS pins.
+                              // This is not a valid combination.
+                printk("mpi: Unknown card plugged into slot\n"); 
+                break;
+      
+            case 0x00000002:  // CCD2 is tied to either CVS1 or CVS2.
+                mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
+                mdelay(1);
+                data32 = mpi->pcmcia_cntl1;
+                if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid.
+                    printk("mpi: Unknown card plugged into slot\n"); 
+                } else {// CCD2 is tied to CVS2.
+                    printk("mpi: Detected 3.3 and x.x Cardbus card\n");
+                    cardtype = MPI_CARDTYPE_CARDBUS;
+                }
+                break;
+
+            case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
+                             // This is not a valid combination.
+                printk("mpi: Unknown card plugged into slot\n"); 
+                break;
+
+            case 0x00000000:  // CCD1 and CCD2 are tied to ground.
+                cardtype = MPI_CARDTYPE_PCMCIA;
+                printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n");
+                break;
+            }
+            break;
+          
+        case 0x0000000C:  // CVS1 and CVS2 are open or tied to CCD1/CCD2.
+                          // 5 valid voltage options.
+      
+            switch (data32 & 0x00000003)  // Test the values of CCD1 and CCD2.
+            {
+            case 0x00000003:  // CCD1 and CCD2 are tied to 1 of the CVS pins.
+                              // This is not a valid combination.
+                printk("mpi: Unknown card plugged into slot\n"); 
+                break;
+      
+            case 0x00000002:  // CCD2 is tied to either CVS1 or CVS2.
+                              // CCD1 is tied to ground.
+                mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
+                mdelay(1);
+                data32 = mpi->pcmcia_cntl1;
+                if (data32 & 0x00000002) {  // CCD2 is tied to CVS1.
+                    printk("mpi: Detected y.y vdc Cardbus card\n");
+                } else {                    // CCD2 is tied to CVS2.
+                    printk("mpi: Detected x.x vdc Cardbus card\n");
+                }
+                cardtype = MPI_CARDTYPE_CARDBUS;
+                break;
+      
+            case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
+                             // CCD2 is tied to ground.
+      
+                mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
+                mdelay(1);
+                data32 = mpi->pcmcia_cntl1;
+                if (data32 & 0x00000001) {// CCD1 is tied to CVS1.
+                    printk("mpi: Detected 3.3 vdc Cardbus card\n");
+                } else {                    // CCD1 is tied to CVS2.
+                    printk("mpi: Detected x.x and y.y Cardbus card\n");
+                }
+                cardtype = MPI_CARDTYPE_CARDBUS;
+                break;
+      
+            case 0x00000000:  // CCD1 and CCD2 are tied to ground.
+                cardtype = MPI_CARDTYPE_PCMCIA;
+                printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n");
+                break;
+            }
+            break;
+      
+        default:
+            printk("mpi: Unknown card plugged into slot\n"); 
+            break;
+        
+        }
+    }
+    return cardtype;
+}
+
+/*
+ * mpi_DetectPcCard: Detect the plugged in PC-Card
+ * Return: < 0 => Unknown card detected
+ *         0 => No card detected
+ *         1 => 16-bit card detected
+ *         2 => 32-bit CardBus card detected
+ */
+static int mpi_DetectPcCard(void)
+{
+    int cardtype;
+
+    cardtype = cardtype_vcc_detect();
+    switch(cardtype) {
+        case MPI_CARDTYPE_PCMCIA:
+            mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits
+            //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
+            mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE);
+            mpi_InitPcmciaSpace();
+            mpi_ResetPcCard(cardtype, FALSE);
+            // Hold card in reset for 10ms
+            mdelay(10);
+            mpi_ResetPcCard(cardtype, TRUE);
+            // Let card come out of reset
+            mdelay(100);
+            break;
+        case MPI_CARDTYPE_CARDBUS:
+            // 8 => CardBus Enable
+            // 1 => PCI Slot Number
+            // C => Float VS1 & VS2
+            mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | 
+                                CARDBUS_ENABLE | 
+                                (CARDBUS_SLOT << 8)| 
+                                VS2_OEN |
+                                VS1_OEN;
+            /* access to this memory window will be to/from CardBus */
+            mpi->l2pmremap1 |= CARDBUS_MEM;
+
+            // Need to reset the Cardbus Card. There's no CardManager to do this, 
+            // and we need to be ready for PCI configuration. 
+            mpi_ResetPcCard(cardtype, FALSE);
+            // Hold card in reset for 10ms
+            mdelay(10);
+            mpi_ResetPcCard(cardtype, TRUE);
+            // Let card come out of reset
+            mdelay(100);
+            break;
+        default:
+            break;
+    }
+    return cardtype;
+}
+
+static int mpi_init(void)
+{
+	unsigned long data;
+    	unsigned int chipid, chiprev, sdramsize;
+
+	printk("Broadcom BCM963xx MPI\n");
+    	chipid  = (PERF->RevID & 0xFFFF0000) >> 16;
+    	chiprev = (PERF->RevID & 0xFF);
+
+	if (boot_loader_type == BOOT_LOADER_CFE)
+    		sdramsize = boot_mem_map.map[0].size;
+	else
+		sdramsize = 0x01000000; 
+    	/*
+     	 * Init the pci interface 
+     	 */
+    	data = GPIO->GPIOMode; // GPIO mode register
+    	data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
+    	GPIO->GPIOMode = data; // PCI internal arbiter
+
+    /*
+     * In the BCM6348 CardBus support is defaulted to Slot 0
+     * because there is no external IDSEL for CardBus.  To disable
+     * the CardBus and allow a standard PCI card in Slot 0 
+     * set the cbus_idsel field to 0x1f.
+    */
+    /*
+    uData = mpi->pcmcia_cntl1;
+    uData |= CARDBUS_IDSEL;
+    mpi->pcmcia_cntl1 = uData;
+    */
+    // Setup PCI I/O Window range. Give 64K to PCI I/O
+    mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1);
+    // UBUS to PCI I/O base address 
+    mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK;
+    // UBUS to PCI I/O Window remap
+    mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN);
+
+    // enable PCI related GPIO pins and data swap between system and PCI bus
+    mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP);
+
+    /* Enable 6348 BusMaster and Memory access mode */
+    data = mpi_GetLocalPciConfigReg(PCI_COMMAND);
+    data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+    mpi_SetLocalPciConfigReg(PCI_COMMAND, data);
+
+    /* Configure two 16 MByte PCI to System memory regions. */
+    /* These memory regions are used when PCI device is a bus master */
+    /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */
+    mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1);
+    mpi->sp0remap = 0x0;
+
+    /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */
+    mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2);
+    mpi->sp1remap = 0x0;
+    mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40);
+
+    if ((chipid == 0x6348) && (chiprev == 0xb0)) {
+        mpi->sp0range = ~(sdramsize-1);
+        mpi->sp1range = ~(sdramsize-1);
+    }
+    /*
+     * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity
+     * by set 0 in bit 8~15.  This resolve read Bcm4306 srom return 0xffff in
+     * first read.
+     */
+    data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER);
+    data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK;
+    data |= 0x00000080;
+    mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data);
+
+    /* enable pci interrupt */
+    mpi->locintstat |= (EXT_PCI_INT << 16);
+
+    mpi_DetectPcCard();
+
+    ioport_resource.start = BCM_PCI_IO_BASE;
+    ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB;
+
+#if defined(CONFIG_USB)
+    PERF->blkEnables |= USBH_CLK_EN;
+    mdelay(100);
+    *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP;
+#endif
+
+    return 0;
+}
+
+void __init plat_mem_setup(void)
+{
+	_machine_restart = brcm_machine_restart;
+	_machine_halt = brcm_machine_halt;
+	pm_power_off = brcm_machine_halt;
+
+	board_time_init = brcm_time_init;
+
+    	/* mpi initialization */
+    	mpi_init();
+}