diff options
author | florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2007-04-03 11:26:12 +0000 |
---|---|---|
committer | florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2007-04-03 11:26:12 +0000 |
commit | d4aeb1b5c81c3adfa2db01e9a6eebf9ec5b6d35b (patch) | |
tree | 76ed696b3e25e39b51ccf35000ffb234b7b95016 /target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h | |
parent | 6e7905d2a36799482b283ad8e3f0f9fa520f09ac (diff) |
Split up brcm63xx into files/
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6848 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h')
-rw-r--r-- | target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h new file mode 100644 index 000000000..70bf80734 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h @@ -0,0 +1,334 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6338_MAP_H +#define __BCM6338_MAP_H + +#include "bcmtypes.h" + +#define PERF_BASE 0xfffe0000 +#define TIMR_BASE 0xfffe0200 +#define UART_BASE 0xfffe0300 +#define GPIO_BASE 0xfffe0400 +#define SPI_BASE 0xfffe0c00 + +typedef struct PerfControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define EMAC_CLK_EN 0x0010 +#define USBS_CLK_EN 0x0010 +#define SAR_CLK_EN 0x0020 + +#define SPI_CLK_EN 0x0200 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 5 +#define EI_CLEAR_SHFT 10 +#define EI_MASK_SHFT 15 +#define EI_INSENS_SHFT 20 +#define EI_LEVEL_SHFT 25 + + uint32 unused[4]; /* (18) */ + uint32 BlockSoftReset; /* (28) */ +#define BSR_SPI 0x00000001 +#define BSR_EMAC 0x00000004 +#define BSR_USBH 0x00000008 +#define BSR_USBS 0x00000010 +#define BSR_ADSL 0x00000020 +#define BSR_DMAMEM 0x00000040 +#define BSR_SAR 0x00000080 +#define BSR_ACLC 0x00000100 +#define BSR_ADSL_MIPS_PLL 0x00000400 +#define BSR_ALL_BLOCKS \ + (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ + BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) +} PerfControl; + +#define PERF ((volatile PerfControl * const) PERF_BASE) + + +typedef struct Timer { + uint16 unused0; + byte TimerMask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + byte TimerInts; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + uint32 TimerCtl0; + uint32 TimerCtl1; + uint32 TimerCtl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + uint32 TimerCnt0; + uint32 TimerCnt1; + uint32 TimerCnt2; + uint32 WatchDogDefCount; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + uint32 WatchDogCtl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + uint32 WDResetCount; +} Timer; + +#define TIMER ((volatile Timer * const) TIMR_BASE) +typedef struct UartChannel { + byte unused0; + byte control; +#define BRGEN 0x80 /* Control register bit defs */ +#define TXEN 0x40 +#define RXEN 0x20 +#define LOOPBK 0x10 +#define TXPARITYEN 0x08 +#define TXPARITYEVEN 0x04 +#define RXPARITYEN 0x02 +#define RXPARITYEVEN 0x01 + + byte config; +#define XMITBREAK 0x40 +#define BITS5SYM 0x00 +#define BITS6SYM 0x10 +#define BITS7SYM 0x20 +#define BITS8SYM 0x30 +#define ONESTOP 0x07 +#define TWOSTOP 0x0f + /* 4-LSBS represent STOP bits/char + * in 1/8 bit-time intervals. Zero + * represents 1/8 stop bit interval. + * Fifteen represents 2 stop bits. + */ + byte fifoctl; +#define RSTTXFIFOS 0x80 +#define RSTRXFIFOS 0x40 + /* 5-bit TimeoutCnt is in low bits of this register. + * This count represents the number of characters + * idle times before setting receive Irq when below threshold + */ + uint32 baudword; + /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate + */ + + byte txf_levl; /* Read-only fifo depth */ + byte rxf_levl; /* Read-only fifo depth */ + byte fifocfg; /* Upper 4-bits are TxThresh, Lower are + * RxThreshold. Irq can be asserted + * when rx fifo> thresh, txfifo<thresh + */ + byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) + * if these bits are also enabled to GPIO_o + */ +#define DTREN 0x01 +#define RTSEN 0x02 + + byte unused1; + byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to + * detect irq on rising AND falling + * edges for corresponding GPIO_i + * if enabled (edge insensitive) + */ + byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense + * 0 for negedge sense if + * not configured for edge + * insensitive (see above) + * Lower 4 bits: Mask to enable change + * detection IRQ for corresponding + * GPIO_i + */ + byte DeltaIP_SyncIP; /* Upper 4 bits show which bits + * have changed (may set IRQ). + * read automatically clears bit + * Lower 4 bits are actual status + */ + + uint16 intMask; /* Same Bit defs for Mask and status */ + uint16 intStatus; +#define DELTAIP 0x0001 +#define TXUNDERR 0x0002 +#define TXOVFERR 0x0004 +#define TXFIFOTHOLD 0x0008 +#define TXREADLATCH 0x0010 +#define TXFIFOEMT 0x0020 +#define RXUNDERR 0x0040 +#define RXOVFERR 0x0080 +#define RXTIMEOUT 0x0100 +#define RXFIFOFULL 0x0200 +#define RXFIFOTHOLD 0x0400 +#define RXFIFONE 0x0800 +#define RXFRAMERR 0x1000 +#define RXPARERR 0x2000 +#define RXBRK 0x4000 + + uint16 unused2; + uint16 Data; /* Write to TX, Read from RX */ + /* bits 11:8 are BRK,PAR,FRM errors */ + + uint32 unused3; + uint32 unused4; +} Uart; + +#define UART ((volatile Uart * const) UART_BASE) + +typedef struct GpioControl { + uint32 unused0; + uint32 GPIODir; /* bits 7:0 */ + uint32 unused1; + uint32 GPIOio; /* bits 7:0 */ + uint32 LEDCtrl; +#define LED3_STROBE 0x08000000 +#define LED2_STROBE 0x04000000 +#define LED1_STROBE 0x02000000 +#define LED0_STROBE 0x01000000 +#define LED_TEST 0x00010000 +#define LED3_DISABLE_LINK_ACT 0x00008000 +#define LED2_DISABLE_LINK_ACT 0x00004000 +#define LED1_DISABLE_LINK_ACT 0x00002000 +#define LED0_DISABLE_LINK_ACT 0x00001000 +#define LED_INTERVAL_SET_MASK 0x00000f00 +#define LED_INTERVAL_SET_320MS 0x00000500 +#define LED_INTERVAL_SET_160MS 0x00000400 +#define LED_INTERVAL_SET_80MS 0x00000300 +#define LED_INTERVAL_SET_40MS 0x00000200 +#define LED_INTERVAL_SET_20MS 0x00000100 +#define LED3_ON 0x00000080 +#define LED2_ON 0x00000040 +#define LED1_ON 0x00000020 +#define LED0_ON 0x00000010 +#define LED3_ENABLE 0x00000008 +#define LED2_ENABLE 0x00000004 +#define LED1_ENABLE 0x00000002 +#define LED0_ENABLE 0x00000001 + uint32 SpiSlaveCfg; +#define SPI_SLAVE_RESET 0x00010000 +#define SPI_RESTRICT 0x00000400 +#define SPI_DELAY_DISABLE 0x00000200 +#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 +#define SPI_SER_ADDR_CFG_MASK 0x0000000c +#define SPI_MODE 0x00000001 + uint32 vRegConfig; +} GpioControl; + +#define GPIO ((volatile GpioControl * const) GPIO_BASE) + +/* Number to mask conversion macro used for GPIODir and GPIOio */ +#define GPIO_NUM_MAX_BITS_MASK 0x0f +#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) + +/* +** Spi Controller +*/ + +typedef struct SpiControl { + uint16 spiCmd; /* (0x0): SPI command */ +#define SPI_CMD_START_IMMEDIATE 3 + +#define SPI_CMD_COMMAND_SHIFT 0 +#define SPI_CMD_DEVICE_ID_SHIFT 4 +#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 + + byte spiIntStatus; /* (0x2): SPI interrupt status */ + byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */ + + byte spiIntMask; /* (0x4): SPI interrupt mask */ +#define SPI_INTR_CMD_DONE 0x01 +#define SPI_INTR_CLEAR_ALL 0x1f + + byte spiStatus; /* (0x5): SPI status */ + + byte spiClkCfg; /* (0x6): SPI clock configuration */ + + byte spiFillByte; /* (0x7): SPI fill byte */ + + byte unused0; + byte spiMsgTail; /* (0x9): msgtail */ + byte unused1; + byte spiRxTail; /* (0xB): rxtail */ + + uint32 unused2[13]; /* (0x0c - 0x3c) reserved */ + + byte spiMsgCtl; /* (0x40) control byte */ +#define HALF_DUPLEX_W 1 +#define HALF_DUPLEX_R 2 +#define SPI_MSG_TYPE_SHIFT 6 +#define SPI_BYTE_CNT_SHIFT 0 + byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */ + byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */ + byte unused3[64]; /* (0xc0 - 0xff) reserved */ +} SpiControl; + +#define SPI ((volatile SpiControl * const) SPI_BASE) + +/* +** External Bus Interface +*/ +typedef struct EbiChipSelect { + uint32 base; /* base address in upper 24 bits */ +#define EBI_SIZE_8K 0 +#define EBI_SIZE_16K 1 +#define EBI_SIZE_32K 2 +#define EBI_SIZE_64K 3 +#define EBI_SIZE_128K 4 +#define EBI_SIZE_256K 5 +#define EBI_SIZE_512K 6 +#define EBI_SIZE_1M 7 +#define EBI_SIZE_2M 8 +#define EBI_SIZE_4M 9 +#define EBI_SIZE_8M 10 +#define EBI_SIZE_16M 11 +#define EBI_SIZE_32M 12 +#define EBI_SIZE_64M 13 +#define EBI_SIZE_128M 14 +#define EBI_SIZE_256M 15 + uint32 config; +#define EBI_ENABLE 0x00000001 /* .. enable this range */ +#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ +#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ +#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ +#define EBI_WREN 0x00000020 /* enable posted writes */ +#define EBI_POLARITY 0x00000040 /* .. set to invert something, + ** don't know what yet */ +#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ +#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ +#define EBI_FIFO 0x00000200 /* .. use fifo */ +#define EBI_RE 0x00000400 /* .. Reverse Endian */ +} EbiChipSelect; + +typedef struct MpiRegisters { + EbiChipSelect cs[1]; /* size chip select configuration */ +} MpiRegisters; + +#define MPI ((volatile MpiRegisters * const) MPI_BASE) + + +#endif + |