brcm47xx: fix phy isolation bit on Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W and alike boards (closes #6789)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21108 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 144 insertions, 11 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.32/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-2.6.32/210-b44_phy_fix.patch
index 3540c23e7..11c6e5abb 100644
--- a/target/linux/brcm47xx/patches-2.6.32/210-b44_phy_fix.patch
+++ b/target/linux/brcm47xx/patches-2.6.32/210-b44_phy_fix.patch
@@ -9,7 +9,71 @@
  }
  
  static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
-@@ -2223,6 +2223,10 @@ static int __devinit b44_init_one(struct
+@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44
+ 	__b44_set_flow_ctrl(bp, pause_enab);
+ }
+ 
+-#ifdef SSB_DRIVER_MIPS
++#ifdef CONFIG_SSB_DRIVER_MIPS
+ extern char *nvram_get(char *name);
+ static void b44_wap54g10_workaround(struct b44 *bp)
+ {
+@@ -421,12 +421,45 @@ static inline void b44_wap54g10_workarou
+ }
+ #endif
+ 
++#ifdef CONFIG_SSB_DRIVER_MIPS
++static inline int startswith (const char *source, const char *cmp) 
++{ 
++       return !strncmp(source,cmp,strlen(cmp)); 
++}
++
++#define getvar(str) (nvram_get(str) ? : "")
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++       /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++       if (simple_strtoul(getvar("boardnum"), NULL, 0) == 100) {
++               bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++       } else {
++               /* WL-HDD */
++               struct ssb_device *sdev = bp->sdev;
++               if (startswith(getvar("hardware_version"), "WL300-")) 
++               {
++                       if (sdev->bus->sprom.et0phyaddr == 0 &&
++                           sdev->bus->sprom.et1phyaddr == 1)
++                               bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++               }
++       }
++       return;
++}
++
++#else
++static inline void b44_bcm47xx_workarounds(struct b44 *bp) 
++{ 
++}
++#endif
++
+ static int b44_setup_phy(struct b44 *bp)
+ {
+ 	u32 val;
+ 	int err;
+ 
+ 	b44_wap54g10_workaround(bp);
++	b44_bcm47xx_workarounds(bp);
+ 
+ 	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ 		return 0;
+@@ -2094,6 +2127,8 @@ static int __devinit b44_get_invariants(
+ 	 * valid PHY address. */
+ 	bp->phy_addr &= 0x1F;
+ 
++	b44_bcm47xx_workarounds(bp);
++
+ 	memcpy(bp->dev->dev_addr, addr, 6);
+ 
+ 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
+@@ -2223,6 +2258,10 @@ static int __devinit b44_init_one(struct
  	 */
  	b44_chip_reset(bp, B44_CHIP_RESET_FULL);
  
diff --git a/target/linux/brcm47xx/patches-2.6.33/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-2.6.33/210-b44_phy_fix.patch
index 3540c23e7..11c6e5abb 100644
--- a/target/linux/brcm47xx/patches-2.6.33/210-b44_phy_fix.patch
+++ b/target/linux/brcm47xx/patches-2.6.33/210-b44_phy_fix.patch
@@ -9,7 +9,71 @@
  }
  
  static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
-@@ -2223,6 +2223,10 @@ static int __devinit b44_init_one(struct
+@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44
+ 	__b44_set_flow_ctrl(bp, pause_enab);
+ }
+ 
+-#ifdef SSB_DRIVER_MIPS
++#ifdef CONFIG_SSB_DRIVER_MIPS
+ extern char *nvram_get(char *name);
+ static void b44_wap54g10_workaround(struct b44 *bp)
+ {
+@@ -421,12 +421,45 @@ static inline void b44_wap54g10_workarou
+ }
+ #endif
+ 
++#ifdef CONFIG_SSB_DRIVER_MIPS
++static inline int startswith (const char *source, const char *cmp) 
++{ 
++       return !strncmp(source,cmp,strlen(cmp)); 
++}
++
++#define getvar(str) (nvram_get(str) ? : "")
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++       /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++       if (simple_strtoul(getvar("boardnum"), NULL, 0) == 100) {
++               bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++       } else {
++               /* WL-HDD */
++               struct ssb_device *sdev = bp->sdev;
++               if (startswith(getvar("hardware_version"), "WL300-")) 
++               {
++                       if (sdev->bus->sprom.et0phyaddr == 0 &&
++                           sdev->bus->sprom.et1phyaddr == 1)
++                               bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++               }
++       }
++       return;
++}
++
++#else
++static inline void b44_bcm47xx_workarounds(struct b44 *bp) 
++{ 
++}
++#endif
++
+ static int b44_setup_phy(struct b44 *bp)
+ {
+ 	u32 val;
+ 	int err;
+ 
+ 	b44_wap54g10_workaround(bp);
++	b44_bcm47xx_workarounds(bp);
+ 
+ 	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ 		return 0;
+@@ -2094,6 +2127,8 @@ static int __devinit b44_get_invariants(
+ 	 * valid PHY address. */
+ 	bp->phy_addr &= 0x1F;
+ 
++	b44_bcm47xx_workarounds(bp);
++
+ 	memcpy(bp->dev->dev_addr, addr, 6);
+ 
+ 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
+@@ -2223,6 +2258,10 @@ static int __devinit b44_init_one(struct
  	 */
  	b44_chip_reset(bp, B44_CHIP_RESET_FULL);
  
diff --git a/target/linux/brcm47xx/patches-2.6.34/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-2.6.34/210-b44_phy_fix.patch
index 72a37d61a..1f8de8d9b 100644
--- a/target/linux/brcm47xx/patches-2.6.34/210-b44_phy_fix.patch
+++ b/target/linux/brcm47xx/patches-2.6.34/210-b44_phy_fix.patch
@@ -9,7 +9,7 @@
  extern char *nvram_get(char *name);
  static void b44_wap54g10_workaround(struct b44 *bp)
  {
-@@ -421,12 +421,40 @@ static inline void b44_wap54g10_workarou
+@@ -421,12 +421,45 @@ static inline void b44_wap54g10_workarou
  }
  #endif
  
@@ -23,13 +23,18 @@
 +
 +static inline void b44_bcm47xx_workarounds(struct b44 *bp)
 +{
-+	/* WL-HDD */
-+	struct ssb_device *sdev = bp->sdev;
-+	if (startswith(getvar("hardware_version"), "WL300-")) 
-+	{
-+		if (sdev->bus->sprom.et0phyaddr == 0 &&
-+		    sdev->bus->sprom.et1phyaddr == 1)
-+			bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++	if (simple_strtoul(getvar("boardnum"), NULL, 0) == 100) {
++		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++	} else {
++		/* WL-HDD */
++		struct ssb_device *sdev = bp->sdev;
++		if (startswith(getvar("hardware_version"), "WL300-")) 
++		{
++			if (sdev->bus->sprom.et0phyaddr == 0 &&
++			    sdev->bus->sprom.et1phyaddr == 1)
++				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++		}
 +	}
 +	return;
 +}
@@ -50,7 +55,7 @@
  
  	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
  		return 0;
-@@ -2089,6 +2117,8 @@ static int __devinit b44_get_invariants(
+@@ -2089,6 +2122,8 @@ static int __devinit b44_get_invariants(
  	 * valid PHY address. */
  	bp->phy_addr &= 0x1F;