summaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx
diff options
context:
space:
mode:
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2009-04-27 15:47:46 +0000
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2009-04-27 15:47:46 +0000
commitb47e0c9f48378f4eef28115ad57862a5570c9d4b (patch)
treeb8b49b4ddd23fb69054f61cf195f6e4471a28578 /target/linux/brcm47xx
parentfcc9a3db52c174448857167fe8c89d1a0f84413c (diff)
brcm47xx: remove 2.6.25 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15448 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm47xx')
-rw-r--r--target/linux/brcm47xx/config-2.6.25228
-rw-r--r--target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/cfe_env.c229
-rw-r--r--target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/include/nvram.h37
-rw-r--r--target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/nvram.c125
-rw-r--r--target/linux/brcm47xx/files-2.6.25/drivers/mtd/maps/bcm47xx-flash.c439
-rw-r--r--target/linux/brcm47xx/files-2.6.25/include/asm-mips/mach-bcm47xx/kernel-entry-init.h26
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/100-board_support.patch46
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch25
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch89
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch365
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch77
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/210-b44_phy_fix.patch31
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/211-b44_bcm4713_phy.patch14
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/212-b44_alignment_fix.patch48
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch42
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch72
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch14
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch11
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch68
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch372
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch117
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch22
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch13
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/630-ssb-fix-irq-init.patch24
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch189
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch159
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch1231
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/710-add-gpio-is-valid.patch38
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/800-fix_cfe_detection.patch108
29 files changed, 0 insertions, 4259 deletions
diff --git a/target/linux/brcm47xx/config-2.6.25 b/target/linux/brcm47xx/config-2.6.25
deleted file mode 100644
index fba45c46f..000000000
--- a/target/linux/brcm47xx/config-2.6.25
+++ /dev/null
@@ -1,228 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARPD is not set
-CONFIG_B44=y
-CONFIG_B44_PCI=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_BASE_SMALL=0
-CONFIG_BCM47XX=y
-CONFIG_BITREVERSE=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CFE=y
-CONFIG_CLASSIC_RCU=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_IDE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_I2C is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IDE is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_ALIX is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_BCM47XX=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROC_KCORE is not set
-# CONFIG_R6040 is not set
-CONFIG_RFKILL=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_RFKILL_LEDS=y
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_RSA is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SLABINFO=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_EXTIF=y
-# CONFIG_SSB_DRIVER_GIGE is not set
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/cfe_env.c b/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/cfe_env.c
deleted file mode 100644
index c1d5eeef5..000000000
--- a/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/cfe_env.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * CFE environment variable access
- *
- * Copyright 2001-2003, Broadcom Corporation
- * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#define NVRAM_SIZE (0x1ff0)
-static char _nvdata[NVRAM_SIZE];
-static char _valuestr[256];
-
-/*
- * TLV types. These codes are used in the "type-length-value"
- * encoding of the items stored in the NVRAM device (flash or EEPROM)
- *
- * The layout of the flash/nvram is as follows:
- *
- * <type> <length> <data ...> <type> <length> <data ...> <type_end>
- *
- * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
- * The "length" field marks the length of the data section, not
- * including the type and length fields.
- *
- * Environment variables are stored as follows:
- *
- * <type_env> <length> <flags> <name> = <value>
- *
- * If bit 0 (low bit) is set, the length is an 8-bit value.
- * If bit 0 (low bit) is clear, the length is a 16-bit value
- *
- * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
- * indicates the size of the length field.
- *
- * Flags are from the constants below:
- *
- */
-#define ENV_LENGTH_16BITS 0x00 /* for low bit */
-#define ENV_LENGTH_8BITS 0x01
-
-#define ENV_TYPE_USER 0x80
-
-#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-
-/*
- * The actual TLV types we support
- */
-
-#define ENV_TLV_TYPE_END 0x00
-#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-
-/*
- * Environment variable flags
- */
-
-#define ENV_FLG_NORMAL 0x00 /* normal read/write */
-#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
-#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
-
-#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
-#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
-
-
-/* *********************************************************************
- * _nvram_read(buffer,offset,length)
- *
- * Read data from the NVRAM device
- *
- * Input parameters:
- * buffer - destination buffer
- * offset - offset of data to read
- * length - number of bytes to read
- *
- * Return value:
- * number of bytes read, or <0 if error occured
- ********************************************************************* */
-static int
-_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-{
- int i;
- if (offset > NVRAM_SIZE)
- return -1;
-
- for ( i = 0; i < length; i++) {
- buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
- }
- return length;
-}
-
-
-static char*
-_strnchr(const char *dest,int c,size_t cnt)
-{
- while (*dest && (cnt > 0)) {
- if (*dest == c) return (char *) dest;
- dest++;
- cnt--;
- }
- return NULL;
-}
-
-
-
-/*
- * Core support API: Externally visible.
- */
-
-/*
- * Get the value of an NVRAM variable
- * @param name name of variable to get
- * @return value of variable or NULL if undefined
- */
-
-char*
-cfe_env_get(unsigned char *nv_buf, char* name)
-{
- int size;
- unsigned char *buffer;
- unsigned char *ptr;
- unsigned char *envval;
- unsigned int reclen;
- unsigned int rectype;
- int offset;
- int flg;
-
- if (!strcmp(name, "nvram_type"))
- return "cfe";
-
- size = NVRAM_SIZE;
- buffer = &_nvdata[0];
-
- ptr = buffer;
- offset = 0;
-
- /* Read the record type and length */
- if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
- goto error;
- }
-
- while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
-
- /* Adjust pointer for TLV type */
- rectype = *(ptr);
- offset++;
- size--;
-
- /*
- * Read the length. It can be either 1 or 2 bytes
- * depending on the code
- */
- if (rectype & ENV_LENGTH_8BITS) {
- /* Read the record type and length - 8 bits */
- if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
- goto error;
- }
- reclen = *(ptr);
- size--;
- offset++;
- }
- else {
- /* Read the record type and length - 16 bits, MSB first */
- if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
- goto error;
- }
- reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
- size -= 2;
- offset += 2;
- }
-
- if (reclen > size)
- break; /* should not happen, bad NVRAM */
-
- switch (rectype) {
- case ENV_TLV_TYPE_ENV:
- /* Read the TLV data */
- if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
- goto error;
- flg = *ptr++;
- envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
- if (envval) {
- *envval++ = '\0';
- memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
- _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-#if 0
- printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-#endif
- if(!strcmp(ptr, name)){
- return _valuestr;
- }
- if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
- return _valuestr;
- }
- break;
-
- default:
- /* Unknown TLV type, skip it. */
- break;
- }
-
- /*
- * Advance to next TLV
- */
-
- size -= (int)reclen;
- offset += reclen;
-
- /* Read the next record type */
- ptr = buffer;
- if (_nvram_read(nv_buf, ptr,offset,1) != 1)
- goto error;
- }
-
-error:
- return NULL;
-
-}
-
diff --git a/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/include/nvram.h b/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/include/nvram.h
deleted file mode 100644
index 6bb18e8e5..000000000
--- a/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/include/nvram.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __NVRAM_H
-#define __NVRAM_H
-
-struct nvram_header {
- u32 magic;
- u32 len;
- u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
- u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
- u32 config_ncdl; /* ncdl values for memc */
-};
-
-struct nvram_tuple {
- char *name;
- char *value;
- struct nvram_tuple *next;
-};
-
-#define NVRAM_HEADER 0x48534C46 /* 'FLSH' */
-#define NVRAM_VERSION 1
-#define NVRAM_HEADER_SIZE 20
-#define NVRAM_SPACE 0x8000
-
-#define NVRAM_MAX_VALUE_LEN 255
-#define NVRAM_MAX_PARAM_LEN 64
-
-char *nvram_get(const char *name);
-
-#endif
diff --git a/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/nvram.c b/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/nvram.c
deleted file mode 100644
index 3f32ad9d6..000000000
--- a/target/linux/brcm47xx/files-2.6.25/arch/mips/bcm47xx/nvram.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * BCM947xx nvram variable access
- *
- * Copyright 2005, Broadcom Corporation
- * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ssb/ssb.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <nvram.h>
-
-#define MB * 1048576
-extern struct ssb_bus ssb;
-
-static char nvram_buf[NVRAM_SPACE];
-static int cfe_env;
-extern char *cfe_env_get(char *nv_buf, const char *name);
-
-/* Probe for NVRAM header */
-static void __init early_nvram_init(void)
-{
- struct ssb_mipscore *mcore = &ssb.mipscore;
- struct nvram_header *header;
- int i;
- u32 base, lim, off;
- u32 *src, *dst;
-
- base = mcore->flash_window;
- lim = mcore->flash_window_size;
- cfe_env = 0;
-
-
- /* XXX: hack for supporting the CFE environment stuff on WGT634U */
- if (lim >= 8 MB) {
- src = (u32 *) KSEG1ADDR(base + 8 MB - 0x2000);
- dst = (u32 *) nvram_buf;
-
- if ((*src & 0xff00ff) == 0x000001) {
- printk("early_nvram_init: WGT634U NVRAM found.\n");
-
- for (i = 0; i < 0x1ff0; i++) {
- if (*src == 0xFFFFFFFF)
- break;
- *dst++ = *src++;
- }
- cfe_env = 1;
- return;
- }
- }
-
- off = 0x20000;
- while (off <= lim) {
- /* Windowed flash access */
- header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
- if (header->magic == NVRAM_HEADER)
- goto found;
- off <<= 1;
- }
-
- /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
- header = (struct nvram_header *) KSEG1ADDR(base + 4096);
- if (header->magic == NVRAM_HEADER)
- goto found;
-
- header = (struct nvram_header *) KSEG1ADDR(base + 1024);
- if (header->magic == NVRAM_HEADER)
- goto found;
-
- return;
-
-found:
- src = (u32 *) header;
- dst = (u32 *) nvram_buf;
- for (i = 0; i < sizeof(struct nvram_header); i += 4)
- *dst++ = *src++;
- for (; i < header->len && i < NVRAM_SPACE; i += 4)
- *dst++ = le32_to_cpu(*src++);
-}
-
-char *nvram_get(const char *name)
-{
- char *var, *value, *end, *eq;
-
- if (!name)
- return NULL;
-
- if (!nvram_buf[0])
- early_nvram_init();
-
- if (cfe_env)
- return cfe_env_get(nvram_buf, name);
-
- /* Look for name=value and return value */
- var = &nvram_buf[sizeof(struct nvram_header)];
- end = nvram_buf + sizeof(nvram_buf) - 2;
- end[0] = end[1] = '\0';
- for (; *var; var = value + strlen(value) + 1) {
- if (!(eq = strchr(var, '=')))
- break;
- value = eq + 1;
- if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
- return value;
- }
-
- return NULL;
-}
-
-EXPORT_SYMBOL(nvram_get);
diff --git a/target/linux/brcm47xx/files-2.6.25/drivers/mtd/maps/bcm47xx-flash.c b/target/linux/brcm47xx/files-2.6.25/drivers/mtd/maps/bcm47xx-flash.c
deleted file mode 100644
index 118d4c4fc..000000000
--- a/target/linux/brcm47xx/files-2.6.25/drivers/mtd/maps/bcm47xx-flash.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/*
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
- * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
- *
- * original functions for finding root filesystem from Mike Baker
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2001-2003, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Flash mapping for BCM947XX boards
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-#include <linux/crc32.h>
-#ifdef CONFIG_SSB
-#include <linux/ssb/ssb.h>
-#endif
-#include <asm/io.h>
-
-
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-#define TRX_VERSION 1
-#define TRX_MAX_LEN 0x3A0000
-#define TRX_NO_HEADER 1 /* Do not write TRX header */
-#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
-#define TRX_MAX_OFFSET 3
-
-struct trx_header {
- u32 magic; /* "HDR0" */
- u32 len; /* Length of file including header */
- u32 crc32; /* 32-bit CRC from flag_version to end of file */
- u32 flag_version; /* 0:15 flags, 16:31 version */
- u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
-};
-
-#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
-#define NVRAM_SPACE 0x8000
-#define WINDOW_ADDR 0x1fc00000
-#define WINDOW_SIZE 0x400000
-#define BUSWIDTH 2
-
-#ifdef CONFIG_SSB
-extern struct ssb_bus ssb_bcm47xx;
-#endif
-static struct mtd_info *bcm47xx_mtd;
-
-static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
- if (len==1) {
- memcpy_fromio(to, map->virt + from, len);
- } else {
- int i;
- u16 *dest = (u16 *) to;
- u16 *src = (u16 *) (map->virt + from);
- for (i = 0; i < (len / 2); i++) {
- dest[i] = src[i];
- }
- if (len & 1)
- *((u8 *)dest+len-1) = src[i] & 0xff;
- }
-}
-
-static struct map_info bcm47xx_map = {
- name: "Physically mapped flash",
- size: WINDOW_SIZE,
- bankwidth: BUSWIDTH,
- phys: WINDOW_ADDR,
-};
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-static struct mtd_partition bcm47xx_parts[] = {
- { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
- { name: "linux", offset: 0, size: 0, },
- { name: "rootfs", offset: 0, size: 0, },
- { name: "nvram", offset: 0, size: 0, },
- { name: NULL, },
-};
-
-static int __init
-find_cfe_size(struct mtd_info *mtd, size_t size)
-{
- struct trx_header *trx;
- unsigned char buf[512];
- int off;
- size_t len;
- int blocksize;
-
- trx = (struct trx_header *) buf;
-
- blocksize = mtd->erasesize;
- if (blocksize < 0x10000)
- blocksize = 0x10000;
-
- for (off = (128*1024); off < size; off += blocksize) {
- memset(buf, 0xe5, sizeof(buf));
-
- /*
- * Read into buffer
- */
- if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
- len != sizeof(buf))
- continue;
-
- /* found a TRX header */
- if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
- goto found;
- }
- }
-
- printk(KERN_NOTICE
- "%s: Couldn't find bootloader size\n",
- mtd->name);
- return -1;
-
- found:
- printk(KERN_NOTICE "bootloader size: %d\n", off);
- return off;
-
-}
-
-/*
- * Copied from mtdblock.c
- *
- * Cache stuff...
- *
- * Since typical flash erasable sectors are much larger than what Linux's
- * buffer cache can handle, we must implement read-modify-write on flash
- * sectors for each block write requests. To avoid over-erasing flash sectors
- * and to speed things up, we locally cache a whole flash sector while it is
- * being written to until a different sector is required.
- */
-
-static void erase_callback(struct erase_info *done)
-{
- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
- wake_up(wait_q);
-}
-
-static int erase_write (struct mtd_info *mtd, unsigned long pos,
- int len, const char *buf)
-{
- struct erase_info erase;
- DECLARE_WAITQUEUE(wait, current);
- wait_queue_head_t wait_q;
- size_t retlen;
- int ret;
-
- /*
- * First, let's erase the flash block.
- */
-
- init_waitqueue_head(&wait_q);
- erase.mtd = mtd;
- erase.callback = erase_callback;
- erase.addr = pos;
- erase.len = len;
- erase.priv = (u_long)&wait_q;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&wait_q, &wait);
-
- ret = mtd->erase(mtd, &erase);
- if (ret) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&wait_q, &wait);
- printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
- "on \"%s\" failed\n",
- pos, len, mtd->name);
- return ret;
- }
-
- schedule(); /* Wait for erase to finish. */
- remove_wait_queue(&wait_q, &wait);
-
- /*
- * Next, writhe data to flash.
- */
-
- ret = mtd->write (mtd, pos, len, &retlen, buf);
- if (ret)
- return ret;
- if (retlen != len)
- return -EIO;
- return 0;
-}
-
-
-
-
-static int __init
-find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
-{
- struct trx_header trx, *trx2;
- unsigned char buf[512], *block;
- int off, blocksize;
- u32 i, crc = ~0;
- size_t len;
- struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
-
- blocksize = mtd->erasesize;
- if (blocksize < 0x10000)
- blocksize = 0x10000;
-
- for (off = (128*1024); off < size; off += blocksize) {
- memset(&trx, 0xe5, sizeof(trx));
-
- /*
- * Read into buffer
- */
- if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
- len != sizeof(trx))
- continue;
-
- /* found a TRX header */
- if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
- part->offset = le32_to_cpu(trx.offsets[2]) ? :
- le32_to_cpu(trx.offsets[1]);
- part->size = le32_to_cpu(trx.len);
-
- part->size -= part->offset;
- part->offset += off;
-
- goto found;
- }
- }
-
- printk(KERN_NOTICE
- "%s: Couldn't find root filesystem\n",
- mtd->name);
- return -1;
-
- found:
- if (part->size == 0)
- return 0;
-
- if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
- return 0;
-
- /* Move the fs outside of the trx */
- part->size = 0;
-
- if (trx.len != part->offset + part->size - off) {
- /* Update the trx offsets and length */
- trx.len = part->offset + part->size - off;
-
- /* Update the trx crc32 */
- for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
- if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
- return 0;
- crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
- }
- trx.crc32 = crc;
-
- /* read first eraseblock from the trx */
- block = kmalloc(mtd->erasesize, GFP_KERNEL);
- trx2 = (struct trx_header *) block;
- if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) {
- printk("Error accessing the first trx eraseblock\n");
- return 0;
- }
-
- printk("Updating TRX offsets and length:\n");
- printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
- printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32);
-
- /* Write updated trx header to the flash */
- memcpy(block, &trx, sizeof(trx));
- if (mtd->unlock)
- mtd->unlock(mtd, off, mtd->erasesize);
- erase_write(mtd, off, mtd->erasesize, block);
- if (mtd->sync)
- mtd->sync(mtd);
- kfree(block);
- printk("Done\n");
- }
-
- return part->size;
-}
-
-struct mtd_partition * __init
-init_mtd_partitions(struct mtd_info *mtd, size_t size)
-{
- int cfe_size;
-
- if ((cfe_size = find_cfe_size(mtd,size)) < 0)
- return NULL;
-
- /* boot loader */
- bcm47xx_parts[0].offset = 0;
- bcm47xx_parts[0].size = cfe_size;
-
- /* nvram */
- if (cfe_size != 384 * 1024) {
- bcm47xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
- bcm47xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
- } else {
- /* nvram (old 128kb config partition on netgear wgt634u) */
- bcm47xx_parts[3].offset = bcm47xx_parts[0].size;
- bcm47xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
- }
-
- /* linux (kernel and rootfs) */
- if (cfe_size != 384 * 1024) {
- bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
- bcm47xx_parts[1].size = bcm47xx_parts[3].offset -
- bcm47xx_parts[1].offset;
- } else {
- /* do not count the elf loader, which is on one block */
- bcm47xx_parts[1].offset = bcm47xx_parts[0].size +
- bcm47xx_parts[3].size + mtd->erasesize;
- bcm47xx_parts[1].size = size -
- bcm47xx_parts[0].size -
- (2*bcm47xx_parts[3].size) -
- mtd->erasesize;
- }
-
- /* find and size rootfs */
- find_root(mtd,size,&bcm47xx_parts[2]);
- bcm47xx_parts[2].size = size - bcm47xx_parts[2].offset - bcm47xx_parts[3].size;
-
- return bcm47xx_parts;
-}
-#endif
-
-int __init init_bcm47xx_map(void)
-{
-#ifdef CONFIG_SSB
- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
-#endif
- size_t size;
- int ret = 0;
-#ifdef CONFIG_MTD_PARTITIONS
- struct mtd_partition *parts;
- int i;
-#endif
-
-#ifdef CONFIG_SSB
- u32 window = mcore->flash_window;
- u32 window_size = mcore->flash_window_size;
-
- printk("flash init: 0x%08x 0x%08x\n", window, window_size);
- bcm47xx_map.phys = window;
- bcm47xx_map.size = window_size;
- bcm47xx_map.virt = ioremap_nocache(window, window_size);
-#else
- printk("flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
- bcm47xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
-#endif
-
- if (!bcm47xx_map.virt) {
- printk("Failed to ioremap\n");
- return -EIO;
- }
-
- simple_map_init(&bcm47xx_map);
-
- if (!(bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map))) {
- printk("Failed to do_map_probe\n");
- iounmap((void *)bcm47xx_map.virt);
- return -ENXIO;
- }
-
- /* override copy_from routine */
- bcm47xx_map.copy_from = bcm47xx_map_copy_from;
-
- bcm47xx_mtd->owner = THIS_MODULE;
-
- size = bcm47xx_mtd->size;
-
- printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR);
-
-#ifdef CONFIG_MTD_PARTITIONS
- parts = init_mtd_partitions(bcm47xx_mtd, size);
- for (i = 0; parts[i].name; i++);
- ret = add_mtd_partitions(bcm47xx_mtd, parts, i);
- if (ret) {
- printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
- goto fail;
- }
-#endif
- return 0;
-
- fail:
- if (bcm47xx_mtd)
- map_destroy(bcm47xx_mtd);
- if (bcm47xx_map.virt)
- iounmap((void *)bcm47xx_map.virt);
- bcm47xx_map.virt = 0;
- return ret;
-}
-
-void __exit cleanup_bcm47xx_map(void)
-{
-#ifdef CONFIG_MTD_PARTITIONS
- del_mtd_partitions(bcm47xx_mtd);
-#endif
- map_destroy(bcm47xx_mtd);
- iounmap((void *)bcm47xx_map.virt);
-}
-
-module_init(init_bcm47xx_map);
-module_exit(cleanup_bcm47xx_map);
diff --git a/target/linux/brcm47xx/files-2.6.25/include/asm-mips/mach-bcm47xx/kernel-entry-init.h b/target/linux/brcm47xx/files-2.6.25/include/asm-mips/mach-bcm47xx/kernel-entry-init.h
deleted file mode 100644
index 7df0dc2b5..000000000
--- a/target/linux/brcm47xx/files-2.6.25/include/asm-mips/mach-bcm47xx/kernel-entry-init.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Embedded Alley Solutions, Inc
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2006 Michael Buesch
- */
-#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H
-#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H
-
-/* Intentionally empty macro, used in head.S. Override in
- * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
- */
- .macro kernel_entry_setup
- .endm
-
-/*
- * Do SMP slave processor setup necessary before we can savely execute C code.
- */
- .macro smp_slave_setup
- .endm
-
-
-#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */
diff --git a/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch b/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch
deleted file mode 100644
index b48215d3c..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -50,8 +50,10 @@ config BCM47XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SSB
-+ select SSB_SERIAL
- select SSB_DRIVER_MIPS
- select SSB_DRIVER_EXTIF
-+ select SSB_DRIVER_PCICORE
- select SSB_PCICORE_HOSTMODE if PCI
- select GENERIC_GPIO
- select SYS_HAS_EARLY_PRINTK
-@@ -790,6 +792,7 @@ config CSRC_SB1250
-
- config CFE
- bool
-+ # Common Firmware Environment
-
- config DMA_COHERENT
- bool
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -94,6 +94,12 @@
- #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
- #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
-
-+/*
-+ * Valid machtype for group Broadcom
-+ */
-+#define MACH_GROUP_BRCM 23 /* Broadcom */
-+#define MACH_BCM47XX 1 /* Broadcom BCM47xx */
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- extern char *system_type;
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -2001,6 +2001,7 @@
- #define PCI_DEVICE_ID_TIGON3_5906M 0x1713
- #define PCI_DEVICE_ID_BCM4401 0x4401
- #define PCI_DEVICE_ID_BCM4401B0 0x4402
-+#define PCI_DEVICE_ID_BCM4713 0x4713
-
- #define PCI_VENDOR_ID_TOPIC 0x151f
- #define PCI_DEVICE_ID_TOPIC_TP560 0x0000
diff --git a/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch b/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch
deleted file mode 100644
index 6d3161c86..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -337,6 +337,12 @@ config MTD_CFI_FLAGADM
- Mapping for the Flaga digital module. If you don't have one, ignore
- this setting.
-
-+config MTD_BCM47XX
-+ tristate "BCM47xx flash device"
-+ depends on MIPS && MTD_CFI && BCM47XX
-+ help
-+ Support for the flash chips on the BCM947xx board.
-+
- config MTD_WALNUT
- tristate "Flash device mapped on IBM 405GP Walnut"
- depends on MTD_JEDECPROBE && WALNUT && !PPC_MERGE
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcm
- obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
- obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
-+obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o
- obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
- obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o
- obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
diff --git a/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch b/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch
deleted file mode 100644
index 941b649c7..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -228,7 +228,6 @@ config MIPS_MALTA
- select I8259
- select MIPS_BOARDS_GEN
- select MIPS_BONITO64
-- select MIPS_CPU_SCACHE
- select PCI_GT64XXX_PCI0
- select MIPS_MSC
- select SWAP_IO_SPACE
-@@ -1421,13 +1420,6 @@ config IP22_CPU_SCACHE
- bool
- select BOARD_SCACHE
-
--#
--# Support for a MIPS32 / MIPS64 style S-caches
--#
--config MIPS_CPU_SCACHE
-- bool
-- select BOARD_SCACHE
--
- config R5000_CPU_SCACHE
- bool
- select BOARD_SCACHE
---- a/arch/mips/kernel/cpu-probe.c
-+++ b/arch/mips/kernel/cpu-probe.c
-@@ -704,6 +704,8 @@ static inline void cpu_probe_mips(struct
- break;
- case PRID_IMP_25KF:
- c->cputype = CPU_25KF;
-+ /* Probe for L2 cache */
-+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
- break;
- case PRID_IMP_34K:
- c->cputype = CPU_34K;
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -1103,7 +1103,6 @@ static void __init loongson2_sc_init(voi
-
- extern int r5k_sc_init(void);
- extern int rm7k_sc_init(void);
--extern int mips_sc_init(void);
-
- static void __cpuinit setup_scache(void)
- {
-@@ -1157,29 +1156,17 @@ static void __cpuinit setup_scache(void)
- #endif
-
- default:
-- if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
-- c->isa_level == MIPS_CPU_ISA_M32R2 ||
-- c->isa_level == MIPS_CPU_ISA_M64R1 ||
-- c->isa_level == MIPS_CPU_ISA_M64R2) {
--#ifdef CONFIG_MIPS_CPU_SCACHE
-- if (mips_sc_init ()) {
-- scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
-- printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
-- scache_size >> 10,
-- way_string[c->scache.ways], c->scache.linesz);
-- }
--#else
-- if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
-- panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
--#endif
-- return;
-- }
- sc_present = 0;
- }
-
- if (!sc_present)
- return;
-
-+ if ((c->isa_level == MIPS_CPU_ISA_M32R1 ||
-+ c->isa_level == MIPS_CPU_ISA_M64R1) &&
-+ !(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
-+ panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
-+
- /* compute a couple of other cache variables */
- c->scache.waysize = scache_size / c->scache.ways;
-
---- a/arch/mips/mm/Makefile
-+++ b/arch/mips/mm/Makefile
-@@ -32,6 +32,5 @@ obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-
- obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
- obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
- obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
--obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o
-
- EXTRA_CFLAGS += -Werror
diff --git a/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch
deleted file mode 100644
index 58dafe569..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch
+++ /dev/null
@@ -1,365 +0,0 @@
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -51,6 +51,10 @@ NESTED(except_vec1_generic, 0, sp)
- NESTED(except_vec3_generic, 0, sp)
- .set push
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+ nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- mfc0 k0, CP0_INDEX
- #endif
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -33,6 +33,9 @@
- #include <asm/cacheflush.h> /* for run_uncached() */
-
-
-+/* For enabling BCM4710 cache workarounds */
-+int bcm4710 = 0;
-+
- /*
- * Special Variant of smp_call_function for use by cache functions:
- *
-@@ -97,6 +100,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page = blast_dcache_page;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_page = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -111,6 +117,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_page_indexed = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -125,6 +134,9 @@ static void __cpuinit r4k_blast_dcache_s
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache = blast_dcache;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -630,6 +642,8 @@ static void local_r4k_flush_cache_sigtra
- unsigned long addr = (unsigned long) arg;
-
- R4600_HIT_CACHEOP_WAR_IMPL;
-+ BCM4710_PROTECTED_FILL_TLB(addr);
-+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
- if (dc_lsize)
- protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1215,6 +1229,17 @@ static void __cpuinit coherency_setup(vo
- * silly idea of putting something else there ...
- */
- switch (current_cpu_type()) {
-+ case CPU_BCM3302:
-+ {
-+ u32 cm;
-+ cm = read_c0_diag();
-+ /* Enable icache */
-+ cm |= (1 << 31);
-+ /* Enable dcache */
-+ cm |= (1 << 30);
-+ write_c0_diag(cm);
-+ }
-+ break;
- case CPU_R4000PC:
- case CPU_R4000SC:
- case CPU_R4000MC:
-@@ -1254,6 +1279,15 @@ void __cpuinit r4k_cache_init(void)
- break;
- }
-
-+ /* Check if special workarounds are required */
-+#ifdef CONFIG_BCM47XX
-+ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) {
-+ printk("Enabling BCM4710A0 cache workarounds.\n");
-+ bcm4710 = 1;
-+ } else
-+#endif
-+ bcm4710 = 0;
-+
- probe_pcache();
- setup_scache();
-
-@@ -1303,5 +1337,13 @@ void __cpuinit r4k_cache_init(void)
- build_clear_page();
- build_copy_page();
- local_r4k___flush_cache_all(NULL);
-+#ifdef CONFIG_BCM47XX
-+ {
-+ static void (*_coherency_setup)(void);
-+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+ _coherency_setup();
-+ }
-+#else
- coherency_setup();
-+#endif
- }
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -677,6 +677,9 @@ static void __cpuinit build_r4000_tlb_re
- /* No need for uasm_i_nop */
- }
-
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-@@ -1084,6 +1087,9 @@ build_r4000_tlbchange_handler_head(u32 *
- struct uasm_reloc **r, unsigned int pte,
- unsigned int ptr)
- {
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
- #else
---- a/include/asm-mips/r4kcache.h
-+++ b/include/asm-mips/r4kcache.h
-@@ -17,6 +17,20 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsmtregs.h>
-
-+#ifdef CONFIG_BCM47XX
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE)))
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
- * This macro return a properly sign-extended address suitable as base address
- * for indexed cache operations. Two issues here:
-@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Index_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Invalidate_D, addr);
- __dflush_epilogue
- }
-@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
- */
- static inline void protected_flush_icache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- protected_cache_op(Hit_Invalidate_I, addr);
- }
-
-@@ -219,6 +237,7 @@ static inline void protected_flush_icach
- */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- protected_cache_op(Hit_Writeback_Inv_D, addr);
- }
-
-@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
- : "r" (base), \
- "i" (op));
-
-+static inline void blast_dcache(void)
-+{
-+ unsigned long start = KSEG0;
-+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+ unsigned long end = (start + dcache_size);
-+
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+
-+ BCM4710_FILL_TLB(start);
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Hit_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+ unsigned long ws_end = current_cpu_data.dcache.ways <<
-+ current_cpu_data.dcache.waybit;
-+ unsigned long ws, addr;
-+ for (ws = 0; ws < ws_end; ws += ws_inc) {
-+ start = page + ws;
-+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, addr);
-+ }
-+ }
-+}
-+
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
- static inline void blast_##pfx##cache##lsize(void) \
- { \
- unsigned long start = INDEX_BASE; \
-@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
- \
- __##pfx##flush_prologue \
- \
-+ war \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
- for (addr = start; addr < end; addr += lsize * 32) \
- cache##lsize##_unroll32(addr|ws, indexop); \
-@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
- \
- __##pfx##flush_prologue \
- \
-+ war \
- do { \
- cache##lsize##_unroll32(start, hitop); \
- start += lsize * 32; \
-@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
- current_cpu_data.desc.waybit; \
- unsigned long ws, addr; \
- \
-+ war \
-+ \
- __##pfx##flush_prologue \
- \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
-@@ -393,35 +460,37 @@ static inline void blast_##pfx##cache##l
- __##pfx##flush_epilogue \
- }
-
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
- static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
- unsigned long end) \
- { \
- unsigned long lsize = cpu_##desc##_line_size(); \
- unsigned long addr = start & ~(lsize - 1); \
- unsigned long aend = (end - 1) & ~(lsize - 1); \
-+ war \
- \
- __##pfx##flush_prologue \
- \
- while (1) { \
-+ war2 \
- prot##cache_op(hitop, addr); \
- if (addr == aend) \
- break; \
-@@ -431,13 +500,13 @@ static inline void prot##blast_##pfx##ca
- __##pfx##flush_epilogue \
- }
-
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
-
- #endif /* _ASM_R4KCACHE_H */
---- a/include/asm-mips/stackframe.h
-+++ b/include/asm-mips/stackframe.h
-@@ -359,6 +359,10 @@
- .macro RESTORE_SP_AND_RET
- LONG_L sp, PT_R29(sp)
- .set mips3
-+#ifdef CONFIG_BCM47XX
-+ nop
-+ nop
-+#endif
- eret
- .set mips0
- .endm
diff --git a/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch
deleted file mode 100644
index 5fe38aaaf..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch
+++ /dev/null
@@ -1,77 +0,0 @@
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -211,7 +211,7 @@ void copy_user_highpage(struct page *to,
- void *vfrom, *vto;
-
- vto = kmap_atomic(to, KM_USER1);
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
-@@ -235,7 +235,7 @@ void copy_to_user_page(struct vm_area_st
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(page) && !Page_dcache_dirty(page)) {
- void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(vto, src, len);
-@@ -255,7 +255,7 @@ void copy_from_user_page(struct vm_area_
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(page) && !Page_dcache_dirty(page)) {
- void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(dst, vfrom, len);
---- /dev/null
-+++ b/include/asm-mips/mach-bcm47xx/cpu-feature-overrides.h
-@@ -0,0 +1,13 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
-+ */
-+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_use_kmap_coherent 0
-+
-+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/include/asm-mips/cpu-features.h
-+++ b/include/asm-mips/cpu-features.h
-@@ -101,6 +101,9 @@
- #ifndef cpu_has_pindexed_dcache
- #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
-
- /*
- * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -484,7 +484,7 @@ static inline void local_r4k_flush_cache
- * Use kmap_coherent or kmap_atomic to do flushes for
- * another ASID than the current one.
- */
-- if (cpu_has_dc_aliases)
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent)
- vaddr = kmap_coherent(page, addr);
- else
- vaddr = kmap_atomic(page, KM_USER0);
-@@ -505,7 +505,7 @@ static inline void local_r4k_flush_cache
- }
-
- if (vaddr) {
-- if (cpu_has_dc_aliases)
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent)
- kunmap_coherent();
- else
- kunmap_atomic(vaddr, KM_USER0);
diff --git a/target/linux/brcm47xx/patches-2.6.25/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-2.6.25/210-b44_phy_fix.patch
deleted file mode 100644
index 6669fba46..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/210-b44_phy_fix.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -339,7 +339,7 @@ static int b44_phy_reset(struct b44 *bp)
- }
- }
-
-- return 0;
-+ return err;
- }
-
- static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
-@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44
- __b44_set_flow_ctrl(bp, pause_enab);
- }
-
--#ifdef SSB_DRIVER_MIPS
-+#ifdef CONFIG_SSB_DRIVER_MIPS
- extern char *nvram_get(char *name);
- static void b44_wap54g10_workaround(struct b44 *bp)
- {
-@@ -2211,6 +2211,10 @@ static int __devinit b44_init_one(struct
- */
- b44_chip_reset(bp, B44_CHIP_RESET_FULL);
-
-+ /* do a phy reset to test if there is an active phy */
-+ if (b44_phy_reset(bp) < 0)
-+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+
- printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %s\n",
- dev->name, print_mac(mac, dev->dev_addr));
-
diff --git a/target/linux/brcm47xx/patches-2.6.25/211-b44_bcm4713_phy.patch b/target/linux/brcm47xx/patches-2.6.25/211-b44_bcm4713_phy.patch
deleted file mode 100644
index 13f93bdb9..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/211-b44_bcm4713_phy.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -2094,6 +2094,11 @@ static int __devinit b44_get_invariants(
- return -EINVAL;
- }
-
-+ if (bp->sdev->id.coreid == 0x806 && bp->sdev->id.revision == 0x0) {
-+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+ bp->dma_offset = 0;
-+ }
-+
- memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len);
-
- bp->imask = IMASK_DEF;
diff --git a/target/linux/brcm47xx/patches-2.6.25/212-b44_alignment_fix.patch b/target/linux/brcm47xx/patches-2.6.25/212-b44_alignment_fix.patch
deleted file mode 100644
index d65c37e44..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/212-b44_alignment_fix.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -73,8 +73,8 @@
- (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
- #define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1))
-
--#define RX_PKT_OFFSET 30
--#define RX_PKT_BUF_SZ (1536 + RX_PKT_OFFSET + 64)
-+#define RX_PKT_OFFSET (RX_HEADER_LEN + 2)
-+#define RX_PKT_BUF_SZ (1536 + RX_PKT_OFFSET)
-
- /* minimum number of free TX descriptors required to wake up TX process */
- #define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4)
-@@ -682,7 +682,6 @@ static int b44_alloc_rx_skb(struct b44 *
- }
-
- rh = (struct rx_header *) skb->data;
-- skb_reserve(skb, RX_PKT_OFFSET);
-
- rh->len = 0;
- rh->flags = 0;
-@@ -693,13 +692,13 @@ static int b44_alloc_rx_skb(struct b44 *
- if (src_map != NULL)
- src_map->skb = NULL;
-
-- ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - RX_PKT_OFFSET));
-+ ctrl = (DESC_CTRL_LEN & RX_PKT_BUF_SZ);
- if (dest_idx == (B44_RX_RING_SIZE - 1))
- ctrl |= DESC_CTRL_EOT;
-
- dp = &bp->rx_ring[dest_idx];
- dp->ctrl = cpu_to_le32(ctrl);
-- dp->addr = cpu_to_le32((u32) mapping + RX_PKT_OFFSET + bp->dma_offset);
-+ dp->addr = cpu_to_le32((u32) mapping + bp->dma_offset);
-
- if (bp->flags & B44_FLAG_RX_RING_HACK)
- b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma,
-@@ -809,8 +808,8 @@ static int b44_rx(struct b44 *bp, int bu
- dma_unmap_single(bp->sdev->dma_dev, map,
- skb_size, DMA_FROM_DEVICE);
- /* Leave out rx_header */
-- skb_put(skb, len + RX_PKT_OFFSET);
-- skb_pull(skb, RX_PKT_OFFSET);
-+ skb_put(skb, len + RX_PKT_OFFSET);
-+ skb_pull(skb, RX_PKT_OFFSET);
- } else {
- struct sk_buff *copy_skb;
-
diff --git a/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch
deleted file mode 100644
index 6a4341fed..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -270,6 +270,8 @@ void ssb_chipco_resume(struct ssb_chipco
- void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
- u32 *plltype, u32 *n, u32 *m)
- {
-+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+ return;
- *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- switch (*plltype) {
-@@ -293,6 +295,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
- void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
- u32 *plltype, u32 *n, u32 *m)
- {
-+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+ return;
- *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- switch (*plltype) {
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -161,6 +161,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
-
- if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
- rate = 200000000;
-+ } else if (bus->chip_id == 0x5354) {
-+ rate = 240000000;
- } else {
- rate = ssb_calc_clock_rate(pll_type, n, m);
- }
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -867,6 +867,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
-
- if (bus->chip_id == 0x5365) {
- rate = 100000000;
-+ } else if (bus->chip_id == 0x5354) {
-+ rate = 120000000;
- } else {
- rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
- if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
diff --git a/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch b/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch
deleted file mode 100644
index 856651b3d..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -142,10 +142,59 @@ static int ssb_ohci_attach(struct ssb_de
- int err = -ENOMEM;
- u32 tmp, flags = 0;
-
-- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+ /*
-+ * THE FOLLOWING COMMENTS PRESERVED FROM GPL SOURCE RELEASE
-+ *
-+ * The USB core requires a special bit to be set during core
-+ * reset to enable host (OHCI) mode. Resetting the SB core in
-+ * pcibios_enable_device() is a hack for compatibility with
-+ * vanilla usb-ohci so that it does not have to know about
-+ * SB. A driver that wants to use the USB core in device mode
-+ * should know about SB and should reset the bit back to 0
-+ * after calling pcibios_enable_device().
-+ */
-+
-+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-+ ssb_device_enable(dev, flags);
-+ }
-+
-+ /*
-+ * USB 2.0 special considerations:
-+ *
-+ * 1. Since the core supports both OHCI and EHCI functions, it must
-+ * only be reset once.
-+ *
-+ * 2. In addition to the standard SB reset sequence, the Host Control
-+ * Register must be programmed to bring the USB core and various
-+ * phy components out of reset.
-+ */
-+
-+ else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+#warning FIX ME need test for core being up & exit
-+ ssb_device_enable(dev, 0);
-+ ssb_write32(dev, 0x200, 0x7ff);
-+ udelay(1);
-+ if (dev->id.revision == 1) { // bug in rev 1
-+
-+ /* Change Flush control reg */
-+ tmp = ssb_read32(dev, 0x400);
-+ tmp &= ~8;
-+ ssb_write32(dev, 0x400, tmp);
-+ tmp = ssb_read32(dev, 0x400);
-+ printk("USB20H fcr: 0x%0x\n", tmp);
-+
-+ /* Change Shim control reg */
-+ tmp = ssb_read32(dev, 0x304);
-+ tmp &= ~0x100;
-+ ssb_write32(dev, 0x304, tmp);
-+ tmp = ssb_read32(dev, 0x304);
-+ printk("USB20H shim: 0x%0x\n", tmp);
-+ }
-+ }
-+ else
-+ ssb_device_enable(dev, 0);
-
-- ssb_device_enable(dev, flags);
-
- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- dev->dev->bus_id);
-@@ -236,6 +285,7 @@ static int ssb_ohci_resume(struct ssb_de
- static const struct ssb_device_id ssb_ohci_table[] = {
- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
- SSB_DEVTABLE_END
- };
- MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
diff --git a/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch b/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch
deleted file mode 100644
index afeec9c69..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -195,6 +195,11 @@ static int ssb_ohci_attach(struct ssb_de
- else
- ssb_device_enable(dev, 0);
-
-+ /*
-+ * Set dma mask - 32 bit mask is just an assumption
-+ */
-+ if (ssb_dma_set_mask(dev, DMA_32BIT_MASK))
-+ return -EOPNOTSUPP;
-
- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- dev->dev->bus_id);
diff --git a/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch
deleted file mode 100644
index f5b5d7768..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/include/asm-mips/cacheflush.h
-+++ b/include/asm-mips/cacheflush.h
-@@ -32,7 +32,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch b/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch
deleted file mode 100644
index 505e8aa4d..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -205,32 +205,6 @@ void kunmap_coherent(void)
- preempt_check_resched();
- }
-
--void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma)
--{
-- void *vfrom, *vto;
--
-- vto = kmap_atomic(to, KM_USER1);
-- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
-- page_mapped(from) && !Page_dcache_dirty(from)) {
-- vfrom = kmap_coherent(from, vaddr);
-- copy_page(vto, vfrom);
-- kunmap_coherent();
-- } else {
-- vfrom = kmap_atomic(from, KM_USER0);
-- copy_page(vto, vfrom);
-- kunmap_atomic(vfrom, KM_USER0);
-- }
-- if (((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) ||
-- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-- flush_data_cache_page((unsigned long)vto);
-- kunmap_atomic(vto, KM_USER1);
-- /* Make sure this page is cleared on other CPU's too before using it */
-- smp_wmb();
--}
--
--EXPORT_SYMBOL(copy_user_highpage);
--
- void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
---- a/include/asm-mips/page.h
-+++ b/include/asm-mips/page.h
-@@ -32,6 +32,7 @@
- #ifndef __ASSEMBLY__
-
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- #include <asm/io.h>
-
- /*
-@@ -64,13 +65,16 @@ static inline void clear_user_page(void
- flush_data_cache_page((unsigned long)addr);
- }
-
--extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-- struct page *to);
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+ struct page *to)
-+{
-+ extern void (*flush_data_cache_page)(unsigned long addr);
-
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+ copy_page(vto, vfrom);
-+ if (!cpu_has_ic_fills_f_dc ||
-+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+ flush_data_cache_page((unsigned long)vto);
-+}
-
- /*
- * These are used to make use of C type-checking..
diff --git a/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch
deleted file mode 100644
index 7153871d2..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch
+++ /dev/null
@@ -1,372 +0,0 @@
---- a/arch/mips/bcm47xx/irq.c
-+++ b/arch/mips/bcm47xx/irq.c
-@@ -1,5 +1,6 @@
- /*
- * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
-+ * Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
-@@ -23,10 +24,19 @@
- */
-
- #include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
-+#include <linux/pci.h>
-+#include <linux/ssb/ssb.h>
-+
- #include <asm/irq_cpu.h>
-
-+
-+extern struct ssb_bus ssb_bcm47xx;
-+
-+
- void plat_irq_dispatch(void)
- {
- u32 cause;
-@@ -53,3 +63,19 @@ void __init arch_init_irq(void)
- {
- mips_cpu_irq_init();
- }
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ int res;
-+
-+ res = ssb_pcibios_map_irq(dev, slot, pin);
-+ if (res < 0) {
-+ printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
-+ dev->dev.bus_id);
-+ return 0;
-+ }
-+ /* IRQ-0 and IRQ-1 are software interrupts. */
-+ WARN_ON((res == 0) || (res == 1));
-+
-+ return res;
-+}
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -2,7 +2,7 @@
- * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
- * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-- * Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
-+ * Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
-@@ -25,23 +25,52 @@
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-+#include <linux/init.h>
- #include <linux/types.h>
--#include <linux/ssb/ssb.h>
-+#include <linux/tty.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_reg.h>
-+#include <linux/serial_8250.h>
- #include <asm/bootinfo.h>
--#include <asm/reboot.h>
- #include <asm/time.h>
--#include <bcm47xx.h>
-+#include <asm/reboot.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <linux/pm.h>
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_embedded.h>
-+
-+#include "include/nvram.h"
-
- struct ssb_bus ssb_bcm47xx;
- EXPORT_SYMBOL(ssb_bcm47xx);
-
-+extern void bcm47xx_pci_init(void);
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ int err;
-+
-+ err = ssb_pcibios_plat_dev_init(dev);
-+ if (err) {
-+ printk(KERN_ALERT "PCI: Failed to init device %s\n",
-+ pci_name(dev));
-+ }
-+
-+ return err;
-+}
-+
- static void bcm47xx_machine_restart(char *command)
- {
- printk(KERN_ALERT "Please stand by while rebooting the system...\n");
- local_irq_disable();
-+ /* CFE has a reboot callback, but that does not work.
-+ * Oopses with: Reserved instruction in kernel code.
-+ */
-+
- /* Set the watchdog timer to reset immediately */
-- ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 1);
-+ if (ssb_watchdog_timer_set(&ssb_bcm47xx, 1))
-+ printk(KERN_EMERG "SSB watchdog-triggered reboot failed!\n");
- while (1)
- cpu_relax();
- }
-@@ -50,12 +79,13 @@ static void bcm47xx_machine_halt(void)
- {
- /* Disable interrupts and watchdog and spin forever */
- local_irq_disable();
-- ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 0);
-+ if (ssb_watchdog_timer_set(&ssb_bcm47xx, 0))
-+ printk(KERN_EMERG "Failed to disable SSB watchdog!\n");
- while (1)
- cpu_relax();
- }
-
--static void str2eaddr(char *str, char *dest)
-+static void e_aton(char *str, char *dest)
- {
- int i = 0;
-
-@@ -72,52 +102,141 @@ static void str2eaddr(char *str, char *d
- }
- }
-
--static int bcm47xx_get_invariants(struct ssb_bus *bus,
-- struct ssb_init_invariants *iv)
-+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
- {
-- char buf[100];
-+ char *s;
-
-- /* Fill boardinfo structure */
-- memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
-+ memset(sprom, 0xFF, sizeof(struct ssb_sprom));
-
-- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
-- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
-- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
-- iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
--
-- /* Fill sprom structure */
-- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
-- iv->sprom.revision = 3;
--
-- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
-- str2eaddr(buf, iv->sprom.et0mac);
-- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
-- str2eaddr(buf, iv->sprom.et1mac);
-- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
-- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
-- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
-- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
-- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
-+ sprom->revision = 1;
-+ if ((s = nvram_get("il0macaddr")))
-+ e_aton(s, sprom->il0mac);
-+ if ((s = nvram_get("et0macaddr")))
-+ e_aton(s, sprom->et0mac);
-+ if ((s = nvram_get("et1macaddr")))
-+ e_aton(s, sprom->et1mac);
-+ if ((s = nvram_get("et0phyaddr")))
-+ sprom->et0phyaddr = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("et1phyaddr")))
-+ sprom->et1phyaddr = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("et0mdcport")))
-+ sprom->et0mdcport = !!simple_strtoul(s, NULL, 10);
-+ if ((s = nvram_get("et1mdcport")))
-+ sprom->et1mdcport = !!simple_strtoul(s, NULL, 10);
-+ if ((s = nvram_get("pa0b0")))
-+ sprom->pa0b0 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa0b1")))
-+ sprom->pa0b1 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa0b2")))
-+ sprom->pa0b2 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa1b0")))
-+ sprom->pa1b0 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa1b1")))
-+ sprom->pa1b1 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa1b2")))
-+ sprom->pa1b2 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("wl0gpio0")))
-+ sprom->gpio0 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("wl0gpio1")))
-+ sprom->gpio1 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("wl0gpio2")))
-+ sprom->gpio2 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("wl0gpio3")))
-+ sprom->gpio3 = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa0maxpwr")))
-+ sprom->maxpwr_bg = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa1maxpwr")))
-+ sprom->maxpwr_a = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa0itssit")))
-+ sprom->itssi_bg = simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("pa1itssit")))
-+ sprom->itssi_a = simple_strtoul(s, NULL, 0);
-+ sprom->boardflags_lo = 0;
-+ if ((s = nvram_get("boardflags")))
-+ sprom->boardflags_lo = simple_strtoul(s, NULL, 0);
-+ sprom->boardflags_hi = 0;
-+ if ((s = nvram_get("boardflags2")))
-+ sprom->boardflags_hi = simple_strtoul(s, NULL, 0);
-+}
-+
-+static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv)
-+{
-+ char *s;
-+
-+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
-+ if ((s = nvram_get("boardtype")))
-+ iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0);
-+ if ((s = nvram_get("boardrev")))
-+ iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0);
-+
-+ bcm47xx_fill_sprom(&iv->sprom);
-+
-+ if ((s = nvram_get("cardbus")))
-+ iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10);
-
- return 0;
- }
-
- void __init plat_mem_setup(void)
- {
-- int err;
-+ int i, err;
-+ char *s;
-+ struct ssb_mipscore *mcore;
-+
-+ err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants);
-+ if (err) {
-+ const char *msg = "Failed to initialize SSB bus (err %d)\n";
-+ printk(msg, err); /* Make sure the message gets out of the box. */
-+ panic(msg, err);
-+ }
-+ mcore = &ssb_bcm47xx.mipscore;
-+
-+ s = nvram_get("kernel_args");
-+ if (s && !strncmp(s, "console=ttyS1", 13)) {
-+ struct ssb_serial_port port;
-+
-+ printk("Swapping serial ports!\n");
-+ /* swap serial ports */
-+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
-+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
-+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
-+ }
-
-- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
-- bcm47xx_get_invariants);
-- if (err)
-- panic("Failed to initialize SSB bus (err %d)\n", err);
-+ for (i = 0; i < mcore->nr_serial_ports; i++) {
-+ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+ s.line = i;
-+ s.membase = port->regs;
-+ s.irq = port->irq + 2;
-+ s.uartclk = port->baud_base;
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+ s.iotype = SERIAL_IO_MEM;
-+ s.regshift = port->reg_shift;
-+
-+ early_serial_setup(&s);
-+ }
-+ printk("Serial init done.\n");
-
- _machine_restart = bcm47xx_machine_restart;
- _machine_halt = bcm47xx_machine_halt;
- pm_power_off = bcm47xx_machine_halt;
- }
-
-+static int __init bcm47xx_register_gpiodev(void)
-+{
-+ static struct resource res = {
-+ .start = 0xFFFFFFFF,
-+ };
-+ struct platform_device *pdev;
-+
-+ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
-+ if (!pdev) {
-+ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
-+ return -ENODEV;
-+ }
-+
-+ return 0;
-+}
-+device_initcall(bcm47xx_register_gpiodev);
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -22,11 +22,17 @@
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
--
- #include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/serial_reg.h>
-+#include <linux/interrupt.h>
- #include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
- #include <asm/time.h>
--#include <bcm47xx.h>
-+
-+extern struct ssb_bus ssb_bcm47xx;
-
- void __init plat_time_init(void)
- {
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -24,10 +24,10 @@
- #include <asm/io.h>
- #include <asm/uaccess.h>
-
--#include <nvram.h>
-+#include "include/nvram.h"
-
- #define MB * 1048576
--extern struct ssb_bus ssb;
-+extern struct ssb_bus ssb_bcm47xx;
-
- static char nvram_buf[NVRAM_SPACE];
- static int cfe_env;
-@@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c
- /* Probe for NVRAM header */
- static void __init early_nvram_init(void)
- {
-- struct ssb_mipscore *mcore = &ssb.mipscore;
-+ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
- struct nvram_header *header;
- int i;
- u32 base, lim, off;
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
- #
-
--obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -54,6 +54,7 @@ config BCM47XX
- select SSB_DRIVER_MIPS
- select SSB_DRIVER_EXTIF
- select SSB_DRIVER_PCICORE
-+ select SSB_B43_PCI_BRIDGE
- select SSB_PCICORE_HOSTMODE if PCI
- select GENERIC_GPIO
- select SYS_HAS_EARLY_PRINTK
diff --git a/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch b/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch
deleted file mode 100644
index 59f4c1fdb..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/scripts/gen_initramfs_list.sh
-+++ b/scripts/gen_initramfs_list.sh
-@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then
- if [ "${is_cpio_compressed}" = "compressed" ]; then
- cat ${cpio_tfile} > ${output_file}
- else
-- cat ${cpio_tfile} | gzip -f -9 - > ${output_file}
-+ lzma e -lc1 -lp2 -pb2 ${cpio_tfile} ${output_file}
- fi
- [ -z ${cpio_file} ] && rm ${cpio_tfile}
- fi
---- a/init/initramfs.c
-+++ b/init/initramfs.c
-@@ -441,6 +441,69 @@ static void __init flush_window(void)
- outcnt = 0;
- }
-
-+#include <linux/LzmaDecode.h>
-+static int __init lzma_unzip(void)
-+{
-+ unsigned int i; /* temp value */
-+ unsigned int lc; /* literal context bits */
-+ unsigned int lp; /* literal pos state bits */
-+ unsigned int pb; /* pos state bits */
-+ unsigned int osize; /* uncompressed size */
-+ unsigned char *workspace;
-+ unsigned char* outputbuffer;
-+ unsigned int outsizeProcessed = 0;
-+ int workspace_size;
-+ int res;
-+
-+ // lzma args
-+ i = get_byte();
-+ lc = i % 9, i = i / 9;
-+ lp = i % 5, pb = i / 5;
-+
-+ // skip dictionary size
-+ for (i = 0; i < 4; i++)
-+ get_byte();
-+
-+ /* read the lower half of uncompressed size in the header */
-+ osize = ((unsigned int)get_byte()) +
-+ ((unsigned int)get_byte() << 8) +
-+ ((unsigned int)get_byte() << 16) +
-+ ((unsigned int)get_byte() << 24);
-+
-+ /* skip rest of the header (upper half of uncompressed size) */
-+ for (i = 0; i < 4; i++)
-+ get_byte();
-+
-+ workspace_size = ((LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb)) + 100;
-+ printk( KERN_NOTICE "initramfs: LZMA lc=%d,lp=%d,pb=%d,origSize=%d\n",
-+ lc,lp,pb,osize);
-+ outputbuffer = kmalloc(osize, GFP_KERNEL);
-+ if (outputbuffer == 0) {
-+ printk(KERN_ERR "initramfs: Couldn't allocate lzma output buffer\n");
-+ return -1;
-+ }
-+
-+ workspace = kmalloc(workspace_size, GFP_KERNEL);
-+ if (workspace == NULL) {
-+ printk(KERN_ERR "initramfs: Couldn't allocate lzma workspace\n");
-+ return -1;
-+ }
-+
-+ res = LzmaDecode(workspace, workspace_size, lc, lp, pb, inbuf + inptr, insize - inptr, outputbuffer, osize, &outsizeProcessed);
-+ if( res != 0 ) {
-+ panic( KERN_ERR "initramfs: Lzma decode failure\n");
-+ return -1;
-+ }
-+
-+ flush_buffer(outputbuffer, outsizeProcessed);
-+ inptr = insize;
-+
-+ kfree(outputbuffer);
-+ kfree(workspace);
-+ state = Reset;
-+ return 0;
-+}
-+
- static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
- {
- int written;
-@@ -475,12 +538,28 @@ static char * __init unpack_to_rootfs(ch
- inptr = 0;
- outcnt = 0; /* bytes in output buffer */
- bytes_out = 0;
-- crc = (ulg)0xffffffffL; /* shift register contents */
-- makecrc();
-- gunzip();
-- if (state != Reset)
-+ if( inbuf[0] == 037 && ((inbuf[1] == 0213) || (inbuf[1] == 0236)))
-+ {
-+ printk( KERN_NOTICE "detected gzip initramfs\n");
-+ crc = (ulg)0xffffffffL; /* shift register contents */
-+ makecrc();
-+ gunzip();
-+ if (state != Reset)
- error("junk in gzipped archive");
-- this_header = saved_offset + inptr;
-+ }
-+ else if(!memcmp(inbuf+1, "\x00\x00\x80\x00", 4)) /* FIXME: hardcoded dictionary size */
-+ {
-+ printk( KERN_NOTICE "detected lzma initramfs\n");
-+ lzma_unzip();
-+ }
-+ else
-+ {
-+ // skip forward ?
-+ crc = (ulg)0xffffffffL; /* shift register contents */
-+ makecrc();
-+ gunzip();
-+ }
-+ this_header = saved_offset + inptr;
- buf += inptr;
- len -= inptr;
- }
diff --git a/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch
deleted file mode 100644
index 9071b7cb3..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-The SSB pcicore driver does create some MMIO resource collisions.
-However, the pcicore PCI-fixup routine fixes these collisions afterwards.
-Remove this sanity check for now until we find a better solution.
---mb
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -182,12 +182,10 @@ static int pcibios_enable_resources(stru
- if ((idx == PCI_ROM_RESOURCE) &&
- (!(r->flags & IORESOURCE_ROM_ENABLE)))
- continue;
-- if (!r->start && r->end) {
-- printk(KERN_ERR "PCI: Device %s not available "
-- "because of resource collisions\n",
-+ if (!r->start && r->end)
-+ printk(KERN_WARNING "PCI: Device %s resource"
-+ "collisions detected. Ignoring...\n",
- pci_name(dev));
-- return -EINVAL;
-- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
diff --git a/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch b/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch
deleted file mode 100644
index af251d5ea..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1173,7 +1173,9 @@ static int __init ssb_modinit(void)
- /* ssb must be initialized after PCI but before the ssb drivers.
- * That means we must use some initcall between subsys_initcall
- * and device_initcall. */
--fs_initcall(ssb_modinit);
-+//FIXME on embedded we need to be early to make sure we can register
-+// a new PCI bus, if needed.
-+subsys_initcall(ssb_modinit);
-
- static void __exit ssb_modexit(void)
- {
diff --git a/target/linux/brcm47xx/patches-2.6.25/630-ssb-fix-irq-init.patch b/target/linux/brcm47xx/patches-2.6.25/630-ssb-fix-irq-init.patch
deleted file mode 100644
index 72505d3e2..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/630-ssb-fix-irq-init.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-Subject: [OpenWrt-Devel] [PATCH] ssb-pcicore: Fix IRQ-vector init on embedded devices
-
-On embedded devices we must not route the interrupts through
-the PCI core, if our host-bus is not PCI.
-
-Reported-by: Steve Brown <sbrown@cortland.com>
-Signed-off-by: Michael Buesch <mb@bu3sch.de>
-
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -519,6 +519,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
- int err = 0;
- u32 tmp;
-
-+ if (dev->bus->bustype != SSB_BUSTYPE_PCI) {
-+ /* This SSB device is not on a PCI host-bus. So the IRQs are
-+ * not routed through the PCI core.
-+ * So we must not enable routing through the PCI core. */
-+ goto out;
-+ }
-+
- if (!pdev)
- goto out;
- bus = pdev->bus;
diff --git a/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch b/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch
deleted file mode 100644
index f96b4d2da..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-Add support for 8bit reads/writes to SSB.
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -508,6 +508,14 @@ error:
- return err;
- }
-
-+static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset)
-+{
-+ struct ssb_bus *bus = dev->bus;
-+
-+ offset += dev->core_index * SSB_CORE_SIZE;
-+ return readb(bus->mmio + offset);
-+}
-+
- static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
- {
- struct ssb_bus *bus = dev->bus;
-@@ -524,6 +532,14 @@ static u32 ssb_ssb_read32(struct ssb_dev
- return readl(bus->mmio + offset);
- }
-
-+static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
-+{
-+ struct ssb_bus *bus = dev->bus;
-+
-+ offset += dev->core_index * SSB_CORE_SIZE;
-+ writeb(value, bus->mmio + offset);
-+}
-+
- static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
- {
- struct ssb_bus *bus = dev->bus;
-@@ -542,8 +558,10 @@ static void ssb_ssb_write32(struct ssb_d
-
- /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
- static const struct ssb_bus_ops ssb_ssb_ops = {
-+ .read8 = ssb_ssb_read8,
- .read16 = ssb_ssb_read16,
- .read32 = ssb_ssb_read32,
-+ .write8 = ssb_ssb_write8,
- .write16 = ssb_ssb_write16,
- .write32 = ssb_ssb_write32,
- };
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -577,6 +577,19 @@ static inline int ssb_pci_assert_buspowe
- }
- #endif /* DEBUG */
-
-+static u8 ssb_pci_read8(struct ssb_device *dev, u16 offset)
-+{
-+ struct ssb_bus *bus = dev->bus;
-+
-+ if (unlikely(ssb_pci_assert_buspower(bus)))
-+ return 0xFF;
-+ if (unlikely(bus->mapped_device != dev)) {
-+ if (unlikely(ssb_pci_switch_core(bus, dev)))
-+ return 0xFF;
-+ }
-+ return ioread8(bus->mmio + offset);
-+}
-+
- static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
- {
- struct ssb_bus *bus = dev->bus;
-@@ -603,6 +616,19 @@ static u32 ssb_pci_read32(struct ssb_dev
- return ioread32(bus->mmio + offset);
- }
-
-+static void ssb_pci_write8(struct ssb_device *dev, u16 offset, u8 value)
-+{
-+ struct ssb_bus *bus = dev->bus;
-+
-+ if (unlikely(ssb_pci_assert_buspower(bus)))
-+ return;
-+ if (unlikely(bus->mapped_device != dev)) {
-+ if (unlikely(ssb_pci_switch_core(bus, dev)))
-+ return;
-+ }
-+ iowrite8(value, bus->mmio + offset);
-+}
-+
- static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value)
- {
- struct ssb_bus *bus = dev->bus;
-@@ -631,8 +657,10 @@ static void ssb_pci_write32(struct ssb_d
-
- /* Not "static", as it's used in main.c */
- const struct ssb_bus_ops ssb_pci_ops = {
-+ .read8 = ssb_pci_read8,
- .read16 = ssb_pci_read16,
- .read32 = ssb_pci_read32,
-+ .write8 = ssb_pci_write8,
- .write16 = ssb_pci_write16,
- .write32 = ssb_pci_write32,
- };
---- a/drivers/ssb/pcmcia.c
-+++ b/drivers/ssb/pcmcia.c
-@@ -172,6 +172,22 @@ static int select_core_and_segment(struc
- return 0;
- }
-
-+static u8 ssb_pcmcia_read8(struct ssb_device *dev, u16 offset)
-+{
-+ struct ssb_bus *bus = dev->bus;
-+ unsigned long flags;
-+ int err;
-+ u8 value = 0xFF;
-+
-+ spin_lock_irqsave(&bus->bar_lock, flags);
-+ err = select_core_and_segment(dev, &offset);
-+ if (likely(!err))
-+ value = readb(bus->mmio + offset);
-+ spin_unlock_irqrestore(&bus->bar_lock, flags);
-+
-+ return value;
-+}
-+
- static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset)
- {
- struct ssb_bus *bus = dev->bus;
-@@ -206,6 +222,20 @@ static u32 ssb_pcmcia_read32(struct ssb_
- return (lo | (hi << 16));
- }
-
-+static void ssb_pcmcia_write8(struct ssb_device *dev, u16 offset, u8 value)
-+{
-+ struct ssb_bus *bus = dev->bus;
-+ unsigned long flags;
-+ int err;
-+
-+ spin_lock_irqsave(&bus->bar_lock, flags);
-+ err = select_core_and_segment(dev, &offset);
-+ if (likely(!err))
-+ writeb(value, bus->mmio + offset);
-+ mmiowb();
-+ spin_unlock_irqrestore(&bus->bar_lock, flags);
-+}
-+
- static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value)
- {
- struct ssb_bus *bus = dev->bus;
-@@ -238,8 +268,10 @@ static void ssb_pcmcia_write32(struct ss
-
- /* Not "static", as it's used in main.c */
- const struct ssb_bus_ops ssb_pcmcia_ops = {
-+ .read8 = ssb_pcmcia_read8,
- .read16 = ssb_pcmcia_read16,
- .read32 = ssb_pcmcia_read32,
-+ .write8 = ssb_pcmcia_write8,
- .write16 = ssb_pcmcia_write16,
- .write32 = ssb_pcmcia_write32,
- };
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -72,8 +72,10 @@ struct ssb_device;
- /* Lowlevel read/write operations on the device MMIO.
- * Internal, don't use that outside of ssb. */
- struct ssb_bus_ops {
-+ u8 (*read8)(struct ssb_device *dev, u16 offset);
- u16 (*read16)(struct ssb_device *dev, u16 offset);
- u32 (*read32)(struct ssb_device *dev, u16 offset);
-+ void (*write8)(struct ssb_device *dev, u16 offset, u8 value);
- void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
- void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
- };
-@@ -348,6 +350,10 @@ void ssb_device_disable(struct ssb_devic
-
-
- /* Device MMIO register read/write functions. */
-+static inline u8 ssb_read8(struct ssb_device *dev, u16 offset)
-+{
-+ return dev->ops->read8(dev, offset);
-+}
- static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
- {
- return dev->ops->read16(dev, offset);
-@@ -356,6 +362,10 @@ static inline u32 ssb_read32(struct ssb_
- {
- return dev->ops->read32(dev, offset);
- }
-+static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
-+{
-+ dev->ops->write8(dev, offset, value);
-+}
- static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
- {
- dev->ops->write16(dev, offset, value);
diff --git a/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch b/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch
deleted file mode 100644
index 8b0445f5b..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-Allow registering PCI devices after early boot.
-
-This is an ugly hack and needs to be rewritten before going upstream.
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -21,6 +21,17 @@
- */
- int pci_probe_only;
-
-+/*
-+ * Indicate whether PCI-bios init was already done.
-+ */
-+static int pcibios_init_done;
-+
-+/*
-+ * The currently used busnumber.
-+ */
-+static int next_busno;
-+static int need_domain_info;
-+
- #define PCI_ASSIGN_ALL_BUSSES 1
-
- unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
-@@ -75,8 +86,32 @@ pcibios_align_resource(void *data, struc
- res->start = start;
- }
-
--void __devinit register_pci_controller(struct pci_controller *hose)
-+/* Most MIPS systems have straight-forward swizzling needs. */
-+
-+static inline u8 bridge_swizzle(u8 pin, u8 slot)
-+{
-+ return (((pin - 1) + slot) % 4) + 1;
-+}
-+
-+static u8 common_swizzle(struct pci_dev *dev, u8 *pinp)
- {
-+ u8 pin = *pinp;
-+
-+ while (dev->bus->parent) {
-+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-+ /* Move up the chain of bridges. */
-+ dev = dev->bus->self;
-+ }
-+ *pinp = pin;
-+
-+ /* The slot is the slot of the last bridge. */
-+ return PCI_SLOT(dev->devfn);
-+}
-+
-+void register_pci_controller(struct pci_controller *hose)
-+{
-+ struct pci_bus *bus;
-+
- if (request_resource(&iomem_resource, hose->mem_resource) < 0)
- goto out;
- if (request_resource(&ioport_resource, hose->io_resource) < 0) {
-@@ -84,9 +119,6 @@ void __devinit register_pci_controller(s
- goto out;
- }
-
-- *hose_tail = hose;
-- hose_tail = &hose->next;
--
- /*
- * Do not panic here but later - this might hapen before console init.
- */
-@@ -94,41 +126,47 @@ void __devinit register_pci_controller(s
- printk(KERN_WARNING
- "registering PCI controller with io_map_base unset\n");
- }
-- return;
-
--out:
-- printk(KERN_WARNING
-- "Skipping PCI bus scan due to resource conflict\n");
--}
-+ if (pcibios_init_done) {
-+ //TODO
-
--/* Most MIPS systems have straight-forward swizzling needs. */
-+ printk(KERN_INFO "Registering a PCI bus after boot\n");
-
--static inline u8 bridge_swizzle(u8 pin, u8 slot)
--{
-- return (((pin - 1) + slot) % 4) + 1;
--}
-+ if (!hose->iommu)
-+ PCI_DMA_BUS_IS_PHYS = 1;
-
--static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
--{
-- u8 pin = *pinp;
-+ bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
-+ hose->bus = bus;
-+ need_domain_info = need_domain_info || hose->index;
-+ hose->need_domain_info = need_domain_info;
-+ if (bus) {
-+ next_busno = bus->subordinate + 1;
-+ /* Don't allow 8-bit bus number overflow inside the hose -
-+ reserve some space for bridges. */
-+ if (next_busno > 224) {
-+ next_busno = 0;
-+ need_domain_info = 1;
-+ }
-+ }
-+ if (!pci_probe_only)
-+ pci_assign_unassigned_resources();
-+ pci_fixup_irqs(common_swizzle, pcibios_map_irq);
-+ } else {
-+ *hose_tail = hose;
-+ hose_tail = &hose->next;
-+ }
-
-- while (dev->bus->parent) {
-- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-- /* Move up the chain of bridges. */
-- dev = dev->bus->self;
-- }
-- *pinp = pin;
-+ return;
-
-- /* The slot is the slot of the last bridge. */
-- return PCI_SLOT(dev->devfn);
-+out:
-+ printk(KERN_WARNING
-+ "Skipping PCI bus scan due to resource conflict\n");
- }
-
- static int __init pcibios_init(void)
- {
- struct pci_controller *hose;
- struct pci_bus *bus;
-- int next_busno;
-- int need_domain_info = 0;
-
- /* Scan all of the recorded PCI controllers. */
- for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-@@ -157,6 +195,7 @@ static int __init pcibios_init(void)
- if (!pci_probe_only)
- pci_assign_unassigned_resources();
- pci_fixup_irqs(common_swizzle, pcibios_map_irq);
-+ pcibios_init_done = 1;
-
- return 0;
- }
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1191,9 +1191,7 @@ static int __init ssb_modinit(void)
- /* ssb must be initialized after PCI but before the ssb drivers.
- * That means we must use some initcall between subsys_initcall
- * and device_initcall. */
--//FIXME on embedded we need to be early to make sure we can register
--// a new PCI bus, if needed.
--subsys_initcall(ssb_modinit);
-+fs_initcall(ssb_modinit);
-
- static void __exit ssb_modexit(void)
- {
diff --git a/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch
deleted file mode 100644
index 1ed53e5ef..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch
+++ /dev/null
@@ -1,1231 +0,0 @@
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -125,4 +125,13 @@ config SSB_DRIVER_EXTIF
-
- If unsure, say N
-
-+config SSB_DRIVER_GIGE
-+ bool "SSB Broadcom Gigabit Ethernet driver"
-+ depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS
-+ help
-+ Driver for the Sonics Silicon Backplane attached
-+ Broadcom Gigabit Ethernet.
-+
-+ If unsure, say N
-+
- endmenu
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -11,6 +11,7 @@ ssb-y += driver_chipcommon.o
- ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
-+ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o
-
- # b43 pci-ssb-bridge driver
- # Not strictly a part of SSB, but kept here for convenience
---- /dev/null
-+++ b/drivers/ssb/driver_gige.c
-@@ -0,0 +1,294 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom Gigabit Ethernet core driver
-+ *
-+ * Copyright 2008, Broadcom Corporation
-+ * Copyright 2008, Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_driver_gige.h>
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+
-+
-+/*
-+MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver");
-+MODULE_AUTHOR("Michael Buesch");
-+MODULE_LICENSE("GPL");
-+*/
-+
-+static const struct ssb_device_id ssb_gige_tbl[] = {
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV),
-+ SSB_DEVTABLE_END
-+};
-+/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */
-+
-+
-+static inline u8 gige_read8(struct ssb_gige *dev, u16 offset)
-+{
-+ return ssb_read8(dev->dev, offset);
-+}
-+
-+static inline u16 gige_read16(struct ssb_gige *dev, u16 offset)
-+{
-+ return ssb_read16(dev->dev, offset);
-+}
-+
-+static inline u32 gige_read32(struct ssb_gige *dev, u16 offset)
-+{
-+ return ssb_read32(dev->dev, offset);
-+}
-+
-+static inline void gige_write8(struct ssb_gige *dev,
-+ u16 offset, u8 value)
-+{
-+ ssb_write8(dev->dev, offset, value);
-+}
-+
-+static inline void gige_write16(struct ssb_gige *dev,
-+ u16 offset, u16 value)
-+{
-+ ssb_write16(dev->dev, offset, value);
-+}
-+
-+static inline void gige_write32(struct ssb_gige *dev,
-+ u16 offset, u32 value)
-+{
-+ ssb_write32(dev->dev, offset, value);
-+}
-+
-+static inline
-+u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset)
-+{
-+ BUG_ON(offset >= 256);
-+ return gige_read8(dev, SSB_GIGE_PCICFG + offset);
-+}
-+
-+static inline
-+u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset)
-+{
-+ BUG_ON(offset >= 256);
-+ return gige_read16(dev, SSB_GIGE_PCICFG + offset);
-+}
-+
-+static inline
-+u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset)
-+{
-+ BUG_ON(offset >= 256);
-+ return gige_read32(dev, SSB_GIGE_PCICFG + offset);
-+}
-+
-+static inline
-+void gige_pcicfg_write8(struct ssb_gige *dev,
-+ unsigned int offset, u8 value)
-+{
-+ BUG_ON(offset >= 256);
-+ gige_write8(dev, SSB_GIGE_PCICFG + offset, value);
-+}
-+
-+static inline
-+void gige_pcicfg_write16(struct ssb_gige *dev,
-+ unsigned int offset, u16 value)
-+{
-+ BUG_ON(offset >= 256);
-+ gige_write16(dev, SSB_GIGE_PCICFG + offset, value);
-+}
-+
-+static inline
-+void gige_pcicfg_write32(struct ssb_gige *dev,
-+ unsigned int offset, u32 value)
-+{
-+ BUG_ON(offset >= 256);
-+ gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
-+}
-+
-+static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-+ int reg, int size, u32 *val)
-+{
-+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
-+ unsigned long flags;
-+
-+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ if (reg >= 256)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+ switch (size) {
-+ case 1:
-+ *val = gige_pcicfg_read8(dev, reg);
-+ break;
-+ case 2:
-+ *val = gige_pcicfg_read16(dev, reg);
-+ break;
-+ case 4:
-+ *val = gige_pcicfg_read32(dev, reg);
-+ break;
-+ default:
-+ WARN_ON(1);
-+ }
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-+ int reg, int size, u32 val)
-+{
-+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
-+ unsigned long flags;
-+
-+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ if (reg >= 256)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+ switch (size) {
-+ case 1:
-+ gige_pcicfg_write8(dev, reg, val);
-+ break;
-+ case 2:
-+ gige_pcicfg_write16(dev, reg, val);
-+ break;
-+ case 4:
-+ gige_pcicfg_write32(dev, reg, val);
-+ break;
-+ default:
-+ WARN_ON(1);
-+ }
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
-+{
-+ struct ssb_gige *dev;
-+ u32 base, tmslow, tmshigh;
-+
-+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-+ if (!dev)
-+ return -ENOMEM;
-+ dev->dev = sdev;
-+
-+ spin_lock_init(&dev->lock);
-+ dev->pci_controller.pci_ops = &dev->pci_ops;
-+ dev->pci_controller.io_resource = &dev->io_resource;
-+ dev->pci_controller.mem_resource = &dev->mem_resource;
-+ dev->pci_controller.io_map_base = 0x800;
-+ dev->pci_ops.read = ssb_gige_pci_read_config;
-+ dev->pci_ops.write = ssb_gige_pci_write_config;
-+
-+ dev->io_resource.name = SSB_GIGE_IO_RES_NAME;
-+ dev->io_resource.start = 0x800;
-+ dev->io_resource.end = 0x8FF;
-+ dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
-+
-+ if (!ssb_device_is_enabled(sdev))
-+ ssb_device_enable(sdev, 0);
-+
-+ /* Setup BAR0. This is a 64k MMIO region. */
-+ base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1));
-+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base);
-+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0);
-+
-+ dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME;
-+ dev->mem_resource.start = base;
-+ dev->mem_resource.end = base + 0x10000 - 1;
-+ dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
-+
-+ /* Enable the memory region. */
-+ gige_pcicfg_write16(dev, PCI_COMMAND,
-+ gige_pcicfg_read16(dev, PCI_COMMAND)
-+ | PCI_COMMAND_MEMORY);
-+
-+ /* Write flushing is controlled by the Flush Status Control register.
-+ * We want to flush every register write with a timeout and we want
-+ * to disable the IRQ mask while flushing to avoid concurrency.
-+ * Note that automatic write flushing does _not_ work from
-+ * an IRQ handler. The driver must flush manually by reading a register.
-+ */
-+ gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068);
-+
-+ /* Check if we have an RGMII or GMII PHY-bus.
-+ * On RGMII do not bypass the DLLs */
-+ tmslow = ssb_read32(sdev, SSB_TMSLOW);
-+ tmshigh = ssb_read32(sdev, SSB_TMSHIGH);
-+ if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) {
-+ tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS;
-+ tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS;
-+ dev->has_rgmii = 1;
-+ } else {
-+ tmslow |= SSB_GIGE_TMSLOW_TXBYPASS;
-+ tmslow |= SSB_GIGE_TMSLOW_RXBYPASS;
-+ dev->has_rgmii = 0;
-+ }
-+ tmslow |= SSB_GIGE_TMSLOW_DLLEN;
-+ ssb_write32(sdev, SSB_TMSLOW, tmslow);
-+
-+ ssb_set_drvdata(sdev, dev);
-+ register_pci_controller(&dev->pci_controller);
-+
-+ return 0;
-+}
-+
-+bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
-+{
-+ if (!pdev->resource[0].name)
-+ return 0;
-+ return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0);
-+}
-+EXPORT_SYMBOL(pdev_is_ssb_gige_core);
-+
-+int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
-+ struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = ssb_get_drvdata(sdev);
-+ struct resource *res;
-+
-+ if (pdev->bus->ops != &dev->pci_ops) {
-+ /* The PCI device is not on this SSB GigE bridge device. */
-+ return -ENODEV;
-+ }
-+
-+ /* Fixup the PCI resources. */
-+ res = &(pdev->resource[0]);
-+ res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
-+ res->name = dev->mem_resource.name;
-+ res->start = dev->mem_resource.start;
-+ res->end = dev->mem_resource.end;
-+
-+ /* Fixup interrupt lines. */
-+ pdev->irq = ssb_mips_irq(sdev) + 2;
-+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq);
-+
-+ return 0;
-+}
-+
-+int ssb_gige_map_irq(struct ssb_device *sdev,
-+ const struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = ssb_get_drvdata(sdev);
-+
-+ if (pdev->bus->ops != &dev->pci_ops) {
-+ /* The PCI device is not on this SSB GigE bridge device. */
-+ return -ENODEV;
-+ }
-+
-+ return ssb_mips_irq(sdev) + 2;
-+}
-+
-+static struct ssb_driver ssb_gige_driver = {
-+ .name = "BCM-GigE",
-+ .id_table = ssb_gige_tbl,
-+ .probe = ssb_gige_probe,
-+};
-+
-+int ssb_gige_init(void)
-+{
-+ return ssb_driver_register(&ssb_gige_driver);
-+}
---- /dev/null
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -0,0 +1,174 @@
-+#ifndef LINUX_SSB_DRIVER_GIGE_H_
-+#define LINUX_SSB_DRIVER_GIGE_H_
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/pci.h>
-+#include <linux/spinlock.h>
-+
-+
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+
-+
-+#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
-+#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
-+#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
-+#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
-+#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
-+#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
-+#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
-+#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
-+#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
-+
-+/* TM Status High flags */
-+#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
-+/* TM Status Low flags */
-+#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
-+#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
-+#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
-+
-+/* Boardflags (low) */
-+#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
-+
-+
-+#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
-+#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
-+
-+struct ssb_gige {
-+ struct ssb_device *dev;
-+
-+ spinlock_t lock;
-+
-+ /* True, if the device has an RGMII bus.
-+ * False, if the device has a GMII bus. */
-+ bool has_rgmii;
-+
-+ /* The PCI controller device. */
-+ struct pci_controller pci_controller;
-+ struct pci_ops pci_ops;
-+ struct resource mem_resource;
-+ struct resource io_resource;
-+};
-+
-+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
-+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
-+
-+/* Convert a pci_dev pointer to a ssb_gige pointer. */
-+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
-+{
-+ if (!pdev_is_ssb_gige_core(pdev))
-+ return NULL;
-+ return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
-+}
-+
-+/* Returns whether the PHY is connected by an RGMII bus. */
-+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ return (dev ? dev->has_rgmii : 0);
-+}
-+
-+/* Returns whether we have a Roboswitch. */
-+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ if (dev)
-+ return !!(dev->dev->bus->sprom.boardflags_lo &
-+ SSB_GIGE_BFL_ROBOSWITCH);
-+ return 0;
-+}
-+
-+/* Returns whether we can only do one DMA at once. */
-+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ if (dev)
-+ return ((dev->dev->bus->chip_id == 0x4785) &&
-+ (dev->dev->bus->chip_rev < 2));
-+ return 0;
-+}
-+
-+/* Returns whether we must flush posted writes. */
-+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ if (dev)
-+ return (dev->dev->bus->chip_id == 0x4785);
-+ return 0;
-+}
-+
-+extern char * nvram_get(const char *name);
-+/* Get the device MAC address */
-+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+{
-+#ifdef CONFIG_BCM947XX
-+ char *res = nvram_get("et0macaddr");
-+ if (res)
-+ memcpy(macaddr, res, 6);
-+#endif
-+}
-+
-+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
-+ struct pci_dev *pdev);
-+extern int ssb_gige_map_irq(struct ssb_device *sdev,
-+ const struct pci_dev *pdev);
-+
-+/* The GigE driver is not a standalone module, because we don't have support
-+ * for unregistering the driver. So we could not unload the module anyway. */
-+extern int ssb_gige_init(void);
-+static inline void ssb_gige_exit(void)
-+{
-+ /* Currently we can not unregister the GigE driver,
-+ * because we can not unregister the PCI bridge. */
-+ BUG();
-+}
-+
-+
-+#else /* CONFIG_SSB_DRIVER_GIGE */
-+/* Gigabit Ethernet driver disabled */
-+
-+
-+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
-+ struct pci_dev *pdev)
-+{
-+ return -ENOSYS;
-+}
-+static inline int ssb_gige_map_irq(struct ssb_device *sdev,
-+ const struct pci_dev *pdev)
-+{
-+ return -ENOSYS;
-+}
-+static inline int ssb_gige_init(void)
-+{
-+ return 0;
-+}
-+static inline void ssb_gige_exit(void)
-+{
-+}
-+
-+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
-+{
-+ return NULL;
-+}
-+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+
-+#endif /* CONFIG_SSB_DRIVER_GIGE */
-+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -60,78 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock);
- /* Core to access the external PCI config space. Can only have one. */
- static struct ssb_pcicore *extpci_core;
-
--static u32 ssb_pcicore_pcibus_iobase = 0x100;
--static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
--
--int pcibios_plat_dev_init(struct pci_dev *d)
--{
-- struct resource *res;
-- int pos, size;
-- u32 *base;
--
-- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
-- pci_name(d));
--
-- /* Fix up resource bases */
-- for (pos = 0; pos < 6; pos++) {
-- res = &d->resource[pos];
-- if (res->flags & IORESOURCE_IO)
-- base = &ssb_pcicore_pcibus_iobase;
-- else
-- base = &ssb_pcicore_pcibus_membase;
-- res->flags |= IORESOURCE_PCI_FIXED;
-- if (res->end) {
-- size = res->end - res->start + 1;
-- if (*base & (size - 1))
-- *base = (*base + size) & ~(size - 1);
-- res->start = *base;
-- res->end = res->start + size - 1;
-- *base += size;
-- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
-- }
-- /* Fix up PCI bridge BAR0 only */
-- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
-- break;
-- }
-- /* Fix up interrupt lines */
-- d->irq = ssb_mips_irq(extpci_core->dev) + 2;
-- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
--
-- return 0;
--}
--
--static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
--{
-- u8 lat;
--
-- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
-- return;
--
-- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
--
-- /* Enable PCI bridge bus mastering and memory space */
-- pci_set_master(dev);
-- if (pcibios_enable_device(dev, ~0) < 0) {
-- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
-- return;
-- }
--
-- /* Enable PCI bridge BAR1 prefetch and burst */
-- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
--
-- /* Make sure our latency is high enough to handle the devices behind us */
-- lat = 168;
-- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-- pci_name(dev), lat);
-- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
--}
--DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
--
--int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
--{
-- return ssb_mips_irq(extpci_core->dev) + 2;
--}
--
- static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
- unsigned int bus, unsigned int dev,
- unsigned int func, unsigned int off)
-@@ -320,6 +248,95 @@ static struct pci_controller ssb_pcicore
- .mem_offset = 0x24000000,
- };
-
-+static u32 ssb_pcicore_pcibus_iobase = 0x100;
-+static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-+
-+/* This function is called when doing a pci_enable_device().
-+ * We must first check if the device is a device on the PCI-core bridge. */
-+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
-+{
-+ struct resource *res;
-+ int pos, size;
-+ u32 *base;
-+
-+ if (d->bus->ops != &ssb_pcicore_pciops) {
-+ /* This is not a device on the PCI-core bridge. */
-+ return -ENODEV;
-+ }
-+
-+ ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
-+ pci_name(d));
-+
-+ /* Fix up resource bases */
-+ for (pos = 0; pos < 6; pos++) {
-+ res = &d->resource[pos];
-+ if (res->flags & IORESOURCE_IO)
-+ base = &ssb_pcicore_pcibus_iobase;
-+ else
-+ base = &ssb_pcicore_pcibus_membase;
-+ res->flags |= IORESOURCE_PCI_FIXED;
-+ if (res->end) {
-+ size = res->end - res->start + 1;
-+ if (*base & (size - 1))
-+ *base = (*base + size) & ~(size - 1);
-+ res->start = *base;
-+ res->end = res->start + size - 1;
-+ *base += size;
-+ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
-+ }
-+ /* Fix up PCI bridge BAR0 only */
-+ if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
-+ break;
-+ }
-+ /* Fix up interrupt lines */
-+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
-+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
-+
-+ return 0;
-+}
-+
-+/* Early PCI fixup for a device on the PCI-core bridge. */
-+static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
-+{
-+ u8 lat;
-+
-+ if (dev->bus->ops != &ssb_pcicore_pciops) {
-+ /* This is not a device on the PCI-core bridge. */
-+ return;
-+ }
-+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
-+ return;
-+
-+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
-+
-+ /* Enable PCI bridge bus mastering and memory space */
-+ pci_set_master(dev);
-+ if (pcibios_enable_device(dev, ~0) < 0) {
-+ ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
-+ return;
-+ }
-+
-+ /* Enable PCI bridge BAR1 prefetch and burst */
-+ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
-+
-+ /* Make sure our latency is high enough to handle the devices behind us */
-+ lat = 168;
-+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-+ pci_name(dev), lat);
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
-+
-+/* PCI device IRQ mapping. */
-+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (dev->bus->ops != &ssb_pcicore_pciops) {
-+ /* This is not a device on the PCI-core bridge. */
-+ return -ENODEV;
-+ }
-+ return ssb_mips_irq(extpci_core->dev) + 2;
-+}
-+
- static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
- {
- u32 val;
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -10,6 +10,9 @@
-
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/ssb/ssb_driver_pci.h>
-+#include <linux/ssb/ssb_driver_gige.h>
-+#include <linux/pci.h>
-
- #include "ssb_private.h"
-
-@@ -130,3 +133,90 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
- return res;
- }
- EXPORT_SYMBOL(ssb_gpio_polarity);
-+
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
-+{
-+ struct pci_dev *pdev = (struct pci_dev *)data;
-+ struct ssb_device *dev;
-+ unsigned int i;
-+ int res;
-+
-+ for (i = 0; i < bus->nr_devices; i++) {
-+ dev = &(bus->devices[i]);
-+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
-+ continue;
-+ if (!dev->dev ||
-+ !dev->dev->driver ||
-+ !device_is_registered(dev->dev))
-+ continue;
-+ res = ssb_gige_pcibios_plat_dev_init(dev, pdev);
-+ if (res >= 0)
-+ return res;
-+ }
-+
-+ return -ENODEV;
-+}
-+#endif /* CONFIG_SSB_DRIVER_GIGE */
-+
-+int ssb_pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ int err;
-+
-+ err = ssb_pcicore_plat_dev_init(dev);
-+ if (!err)
-+ return 0;
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+ err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback);
-+ if (err >= 0)
-+ return err;
-+#endif
-+ /* This is not a PCI device on any SSB device. */
-+
-+ return -ENODEV;
-+}
-+
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data)
-+{
-+ const struct pci_dev *pdev = (const struct pci_dev *)data;
-+ struct ssb_device *dev;
-+ unsigned int i;
-+ int res;
-+
-+ for (i = 0; i < bus->nr_devices; i++) {
-+ dev = &(bus->devices[i]);
-+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
-+ continue;
-+ if (!dev->dev ||
-+ !dev->dev->driver ||
-+ !device_is_registered(dev->dev))
-+ continue;
-+ res = ssb_gige_map_irq(dev, pdev);
-+ if (res >= 0)
-+ return res;
-+ }
-+
-+ return -ENODEV;
-+}
-+#endif /* CONFIG_SSB_DRIVER_GIGE */
-+
-+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ int res;
-+
-+ /* Check if this PCI device is a device on a SSB bus or device
-+ * and return the IRQ number for it. */
-+
-+ res = ssb_pcicore_pcibios_map_irq(dev, slot, pin);
-+ if (res >= 0)
-+ return res;
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+ res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback);
-+ if (res >= 0)
-+ return res;
-+#endif
-+ /* This is not a PCI device on any SSB device. */
-+
-+ return -ENODEV;
-+}
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -426,5 +426,12 @@ extern int ssb_bus_powerup(struct ssb_bu
- extern u32 ssb_admatch_base(u32 adm);
- extern u32 ssb_admatch_size(u32 adm);
-
-+/* PCI device mapping and fixup routines.
-+ * Called from the architecture pcibios init code.
-+ * These are only available on SSB_EMBEDDED configurations. */
-+#ifdef CONFIG_SSB_EMBEDDED
-+int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
-+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-+#endif /* CONFIG_SSB_EMBEDDED */
-
- #endif /* LINUX_SSB_H_ */
---- a/include/linux/ssb/ssb_driver_pci.h
-+++ b/include/linux/ssb/ssb_driver_pci.h
-@@ -1,6 +1,11 @@
- #ifndef LINUX_SSB_PCICORE_H_
- #define LINUX_SSB_PCICORE_H_
-
-+#include <linux/types.h>
-+
-+struct pci_dev;
-+
-+
- #ifdef CONFIG_SSB_DRIVER_PCICORE
-
- /* PCI core registers. */
-@@ -88,6 +93,9 @@ extern void ssb_pcicore_init(struct ssb_
- extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
- struct ssb_device *dev);
-
-+int ssb_pcicore_plat_dev_init(struct pci_dev *d);
-+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-+
-
- #else /* CONFIG_SSB_DRIVER_PCICORE */
-
-@@ -107,5 +115,16 @@ int ssb_pcicore_dev_irqvecs_enable(struc
- return 0;
- }
-
-+static inline
-+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
-+{
-+ return -ENODEV;
-+}
-+static inline
-+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return -ENODEV;
-+}
-+
- #endif /* CONFIG_SSB_DRIVER_PCICORE */
- #endif /* LINUX_SSB_PCICORE_H_ */
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -14,6 +14,7 @@
- #include <linux/io.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_regs.h>
-+#include <linux/ssb/ssb_driver_gige.h>
- #include <linux/dma-mapping.h>
- #include <linux/pci.h>
-
-@@ -68,6 +69,25 @@ found:
- }
- #endif /* CONFIG_SSB_PCIHOST */
-
-+int ssb_for_each_bus_call(unsigned long data,
-+ int (*func)(struct ssb_bus *bus, unsigned long data))
-+{
-+ struct ssb_bus *bus;
-+ int res;
-+
-+ ssb_buses_lock();
-+ list_for_each_entry(bus, &buses, list) {
-+ res = func(bus, data);
-+ if (res >= 0) {
-+ ssb_buses_unlock();
-+ return res;
-+ }
-+ }
-+ ssb_buses_unlock();
-+
-+ return -ENODEV;
-+}
-+
- static struct ssb_device *ssb_device_get(struct ssb_device *dev)
- {
- if (dev)
-@@ -1181,7 +1201,14 @@ static int __init ssb_modinit(void)
- err = b43_pci_ssb_bridge_init();
- if (err) {
- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
-- "initialization failed");
-+ "initialization failed\n");
-+ /* don't fail SSB init because of this */
-+ err = 0;
-+ }
-+ err = ssb_gige_init();
-+ if (err) {
-+ ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
-+ "driver initialization failed\n");
- /* don't fail SSB init because of this */
- err = 0;
- }
-@@ -1195,6 +1222,7 @@ fs_initcall(ssb_modinit);
-
- static void __exit ssb_modexit(void)
- {
-+ ssb_gige_exit();
- b43_pci_ssb_bridge_exit();
- bus_unregister(&ssb_bustype);
- }
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -118,6 +118,8 @@ extern u32 ssb_calc_clock_rate(u32 pllty
- extern int ssb_devices_freeze(struct ssb_bus *bus);
- extern int ssb_devices_thaw(struct ssb_bus *bus);
- extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
-+int ssb_for_each_bus_call(unsigned long data,
-+ int (*func)(struct ssb_bus *bus, unsigned long data));
-
- /* b43_pci_bridge.c */
- #ifdef CONFIG_SSB_B43_PCI_BRIDGE
---- a/drivers/net/tg3.c
-+++ b/drivers/net/tg3.c
-@@ -38,6 +38,7 @@
- #include <linux/workqueue.h>
- #include <linux/prefetch.h>
- #include <linux/dma-mapping.h>
-+#include <linux/ssb/ssb_driver_gige.h>
-
- #include <net/checksum.h>
- #include <net/ip.h>
-@@ -425,8 +426,9 @@ static void _tw32_flush(struct tg3 *tp,
- static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
- {
- tp->write32_mbox(tp, off, val);
-- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
-- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
-+ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
-+ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
-+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
- tp->read32_mbox(tp, off);
- }
-
-@@ -706,7 +708,7 @@ static void tg3_switch_clocks(struct tg3
-
- #define PHY_BUSY_LOOPS 5000
-
--static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
- {
- u32 frame_val;
- unsigned int loops;
-@@ -720,7 +722,7 @@ static int tg3_readphy(struct tg3 *tp, i
-
- *val = 0x0;
-
-- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
-+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- MI_COM_PHY_ADDR_MASK);
- frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- MI_COM_REG_ADDR_MASK);
-@@ -755,7 +757,12 @@ static int tg3_readphy(struct tg3 *tp, i
- return ret;
- }
-
--static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+{
-+ return __tg3_readphy(tp, PHY_ADDR, reg, val);
-+}
-+
-+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
- {
- u32 frame_val;
- unsigned int loops;
-@@ -771,7 +778,7 @@ static int tg3_writephy(struct tg3 *tp,
- udelay(80);
- }
-
-- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
-+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- MI_COM_PHY_ADDR_MASK);
- frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- MI_COM_REG_ADDR_MASK);
-@@ -804,6 +811,11 @@ static int tg3_writephy(struct tg3 *tp,
- return ret;
- }
-
-+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+{
-+ return __tg3_writephy(tp, PHY_ADDR, reg, val);
-+}
-+
- static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
- {
- tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
-@@ -2250,6 +2262,14 @@ static int tg3_setup_copper_phy(struct t
- }
- }
-
-+ if (tp->tg3_flags & TG3_FLG3_ROBOSWITCH) {
-+ current_link_up = 1;
-+ current_speed = SPEED_1000; //FIXME
-+ current_duplex = DUPLEX_FULL;
-+ tp->link_config.active_speed = current_speed;
-+ tp->link_config.active_duplex = current_duplex;
-+ }
-+
- if (current_link_up == 1 &&
- tp->link_config.active_duplex == DUPLEX_FULL)
- tg3_setup_flow_control(tp, lcl_adv, rmt_adv);
-@@ -5197,6 +5217,11 @@ static int tg3_poll_fw(struct tg3 *tp)
- int i;
- u32 val;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- /* Wait up to 20ms for init done. */
- for (i = 0; i < 200; i++) {
-@@ -5435,6 +5460,14 @@ static int tg3_chip_reset(struct tg3 *tp
- tw32(0x5000, 0x400);
- }
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* BCM4785: In order to avoid repercussions from using potentially
-+ * defective internal ROM, stop the Rx RISC CPU, which is not
-+ * required. */
-+ tg3_stop_fw(tp);
-+ tg3_halt_cpu(tp, RX_CPU_BASE);
-+ }
-+
- tw32(GRC_MODE, tp->grc_mode);
-
- if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -5704,9 +5737,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
- return -ENODEV;
- }
-
-- /* Clear firmware's nvram arbitration. */
-- if (tp->tg3_flags & TG3_FLAG_NVRAM)
-- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
-+ /* Clear firmware's nvram arbitration. */
-+ if (tp->tg3_flags & TG3_FLAG_NVRAM)
-+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+ }
-+
- return 0;
- }
-
-@@ -5787,6 +5823,11 @@ static int tg3_load_5701_a0_firmware_fix
- struct fw_info info;
- int err, i;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- info.text_base = TG3_FW_TEXT_ADDR;
- info.text_len = TG3_FW_TEXT_LEN;
- info.text_data = &tg3FwText[0];
-@@ -6345,6 +6386,11 @@ static int tg3_load_tso_firmware(struct
- unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
- int err, i;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
- return 0;
-
-@@ -7306,6 +7352,11 @@ static void tg3_timer(unsigned long __op
-
- spin_lock(&tp->lock);
-
-+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
-+ /* BCM4785: Flush posted writes from GbE to host memory. */
-+ tr32(HOSTCC_MODE);
-+ }
-+
- if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
- /* All of this garbage is because when using non-tagged
- * IRQ status the mailbox/status_block protocol the chip
-@@ -8906,6 +8957,11 @@ static int tg3_test_nvram(struct tg3 *tp
- __le32 *buf;
- int i, j, k, err = 0, size;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* We don't have NVRAM. */
-+ return 0;
-+ }
-+
- if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
- return -EIO;
-
-@@ -9689,7 +9745,7 @@ static int tg3_ioctl(struct net_device *
- return -EAGAIN;
-
- spin_lock_bh(&tp->lock);
-- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
-+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
- spin_unlock_bh(&tp->lock);
-
- data->val_out = mii_regval;
-@@ -9708,7 +9764,7 @@ static int tg3_ioctl(struct net_device *
- return -EAGAIN;
-
- spin_lock_bh(&tp->lock);
-- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
-+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- spin_unlock_bh(&tp->lock);
-
- return err;
-@@ -10177,6 +10233,12 @@ static void __devinit tg3_get_5906_nvram
- /* Chips other than 5700/5701 use the NVRAM for fetching info. */
- static void __devinit tg3_nvram_init(struct tg3 *tp)
- {
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
-+ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
-+ return;
-+ }
-+
- tw32_f(GRC_EEPROM_ADDR,
- (EEPROM_ADDR_FSM_RESET |
- (EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -10317,6 +10379,9 @@ static int tg3_nvram_read(struct tg3 *tp
- {
- int ret;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+ return -ENODEV;
-+
- if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
- return tg3_nvram_read_using_eeprom(tp, offset, val);
-
-@@ -10563,6 +10628,9 @@ static int tg3_nvram_write_block(struct
- {
- int ret;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+ return -ENODEV;
-+
- if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
- ~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -11610,7 +11678,6 @@ static int __devinit tg3_get_invariants(
- tp->write32 = tg3_write_flush_reg32;
- }
-
--
- if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
- (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
- tp->write32_tx_mbox = tg3_write32_tx_mbox;
-@@ -11646,6 +11713,11 @@ static int __devinit tg3_get_invariants(
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
- tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
-+ tp->write32_tx_mbox = tg3_write_flush_reg32;
-+ tp->write32_rx_mbox = tg3_write_flush_reg32;
-+ }
-+
- /* Get eeprom hw config before calling tg3_set_power_state().
- * In particular, the TG3_FLG2_IS_NIC flag must be
- * determined before calling tg3_set_power_state() so that
-@@ -12017,6 +12089,10 @@ static int __devinit tg3_get_device_addr
- }
-
- if (!is_valid_ether_addr(&dev->dev_addr[0])) {
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
-+ }
-+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
- #ifdef CONFIG_SPARC
- if (!tg3_get_default_macaddr_sparc(tp))
- return 0;
-@@ -12508,6 +12584,7 @@ static char * __devinit tg3_phy_string(s
- case PHY_ID_BCM5704: return "5704";
- case PHY_ID_BCM5705: return "5705";
- case PHY_ID_BCM5750: return "5750";
-+ case PHY_ID_BCM5750_2: return "5750-2";
- case PHY_ID_BCM5752: return "5752";
- case PHY_ID_BCM5714: return "5714";
- case PHY_ID_BCM5780: return "5780";
-@@ -12695,6 +12772,13 @@ static int __devinit tg3_init_one(struct
- tp->msg_enable = tg3_debug;
- else
- tp->msg_enable = TG3_DEF_MSG_ENABLE;
-+ if (pdev_is_ssb_gige_core(pdev)) {
-+ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
-+ if (ssb_gige_must_flush_posted_writes(pdev))
-+ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
-+ if (ssb_gige_have_roboswitch(pdev))
-+ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
-+ }
-
- /* The word/byte swap controls here control register access byte
- * swapping. DMA data byte swapping is controlled in the GRC_MODE
---- a/drivers/net/tg3.h
-+++ b/drivers/net/tg3.h
-@@ -2477,6 +2477,9 @@ struct tg3 {
- #define TG3_FLG3_ENABLE_APE 0x00000002
- #define TG3_FLG3_5761_5784_AX_FIXES 0x00000004
- #define TG3_FLG3_5701_DMA_BUG 0x00000008
-+#define TG3_FLG3_IS_SSB_CORE 0x00000010
-+#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00000020
-+#define TG3_FLG3_ROBOSWITCH 0x00000040
-
- struct timer_list timer;
- u16 timer_counter;
-@@ -2532,6 +2535,7 @@ struct tg3 {
- #define PHY_ID_BCM5714 0x60008340
- #define PHY_ID_BCM5780 0x60008350
- #define PHY_ID_BCM5755 0xbc050cc0
-+#define PHY_ID_BCM5750_2 0xbc050cd0
- #define PHY_ID_BCM5787 0xbc050ce0
- #define PHY_ID_BCM5756 0xbc050ed0
- #define PHY_ID_BCM5784 0xbc050fa0
-@@ -2568,7 +2572,7 @@ struct tg3 {
- (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
- (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
- (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
-- (X) == PHY_ID_BCM8002)
-+ (X) == PHY_ID_BCM8002 || (X) == PHY_ID_BCM5750_2)
-
- struct tg3_hw_stats *hw_stats;
- dma_addr_t stats_mapping;
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -212,6 +212,7 @@ void ssb_mipscore_init(struct ssb_mipsco
- /* fallthrough */
- case SSB_DEV_PCI:
- case SSB_DEV_ETHERNET:
-+ case SSB_DEV_ETHERNET_GBIT:
- case SSB_DEV_80211:
- case SSB_DEV_USB20_HOST:
- /* These devices get their own IRQ line if available, the rest goes on IRQ0 */
diff --git a/target/linux/brcm47xx/patches-2.6.25/710-add-gpio-is-valid.patch b/target/linux/brcm47xx/patches-2.6.25/710-add-gpio-is-valid.patch
deleted file mode 100644
index b06f08e1c..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/710-add-gpio-is-valid.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Add gpio_is_valid() for bcm47xx
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -77,3 +77,15 @@ int bcm47xx_gpio_direction_output(unsign
- }
- EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_output);
-
-+int bcm47xx_gpio_is_valid(int gpio)
-+{
-+ if (ssb_bcm47xx.chipco.dev) {
-+ if (gpio >= 0 && gpio < BCM47XX_CHIPCO_GPIO_LINES)
-+ return 1;
-+ } else if (ssb_bcm47xx.extif.dev) {
-+ if (gpio >= 0 && gpio < BCM47XX_EXTIF_GPIO_LINES)
-+ return 1;
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(bcm47xx_gpio_is_valid);
---- a/include/asm-mips/mach-bcm47xx/gpio.h
-+++ b/include/asm-mips/mach-bcm47xx/gpio.h
-@@ -17,6 +17,7 @@ extern int bcm47xx_gpio_get_value(unsign
- extern void bcm47xx_gpio_set_value(unsigned gpio, int value);
- extern int bcm47xx_gpio_direction_input(unsigned gpio);
- extern int bcm47xx_gpio_direction_output(unsigned gpio, int value);
-+extern int bcm47xx_gpio_is_valid(int gpio);
-
- static inline int gpio_request(unsigned gpio, const char *label)
- {
-@@ -52,6 +53,8 @@ static inline int gpio_direction_output(
- return bcm47xx_gpio_direction_output(gpio, value);
- }
-
-+#define gpio_is_valid bcm47xx_gpio_is_valid
-+
-
- /* cansleep wrappers */
- #include <asm-generic/gpio.h>
diff --git a/target/linux/brcm47xx/patches-2.6.25/800-fix_cfe_detection.patch b/target/linux/brcm47xx/patches-2.6.25/800-fix_cfe_detection.patch
deleted file mode 100644
index 63a71f05f..000000000
--- a/target/linux/brcm47xx/patches-2.6.25/800-fix_cfe_detection.patch
+++ /dev/null
@@ -1,108 +0,0 @@
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -32,6 +32,7 @@
- #include <asm/fw/cfe/cfe_error.h>
-
- static int cfe_cons_handle;
-+static void (* __prom_putchar)(char c);
-
- const char *get_system_type(void)
- {
-@@ -40,65 +41,40 @@ const char *get_system_type(void)
-
- void prom_putchar(char c)
- {
-+ if (__prom_putchar)
-+ __prom_putchar(c);
-+}
-+
-+void prom_putchar_cfe(char c)
-+{
- while (cfe_write(cfe_cons_handle, &c, 1) == 0)
- ;
- }
-
--static __init void prom_init_cfe(void)
-+static __init int prom_init_cfe(void)
- {
- uint32_t cfe_ept;
- uint32_t cfe_handle;
- uint32_t cfe_eptseal;
-- int argc = fw_arg0;
-- char **envp = (char **) fw_arg2;
-- int *prom_vec = (int *) fw_arg3;
--
-- /*
-- * Check if a loader was used; if NOT, the 4 arguments are
-- * what CFE gives us (handle, 0, EPT and EPTSEAL)
-- */
-- if (argc < 0) {
-- cfe_handle = (uint32_t)argc;
-- cfe_ept = (uint32_t)envp;
-- cfe_eptseal = (uint32_t)prom_vec;
-- } else {
-- if ((int)prom_vec < 0) {
-- /*
-- * Old loader; all it gives us is the handle,
-- * so use the "known" entrypoint and assume
-- * the seal.
-- */
-- cfe_handle = (uint32_t)prom_vec;
-- cfe_ept = 0xBFC00500;
-- cfe_eptseal = CFE_EPTSEAL;
-- } else {
-- /*
-- * Newer loaders bundle the handle/ept/eptseal
-- * Note: prom_vec is in the loader's useg
-- * which is still alive in the TLB.
-- */
-- cfe_handle = prom_vec[0];
-- cfe_ept = prom_vec[2];
-- cfe_eptseal = prom_vec[3];
-- }
-- }
-
-- if (cfe_eptseal != CFE_EPTSEAL) {
-- /* too early for panic to do any good */
-- printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
-- while (1) ;
-- }
-+ cfe_eptseal = (uint32_t) fw_arg3;
-+ cfe_handle = (uint32_t) fw_arg0;
-+ cfe_ept = (uint32_t) fw_arg2;
-+
-+ if (cfe_eptseal != CFE_EPTSEAL)
-+ return -1;
-
- cfe_init(cfe_handle, cfe_ept);
-+ return 0;
- }
-
--static __init void prom_init_console(void)
-+static __init void prom_init_console_cfe(void)
- {
- /* Initialize CFE console */
- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
- }
-
--static __init void prom_init_cmdline(void)
-+static __init void prom_init_cmdline_cfe(void)
- {
- char buf[CL_SIZE];
-
-@@ -146,9 +122,12 @@ static __init void prom_init_mem(void)
-
- void __init prom_init(void)
- {
-- prom_init_cfe();
-- prom_init_console();
-- prom_init_cmdline();
-+ if (prom_init_cfe() == 0) {
-+ prom_init_console_cfe();
-+ prom_init_cmdline_cfe();
-+ __prom_putchar = prom_putchar_cfe;
-+ }
-+
- prom_init_mem();
- }
-