brcm47xx: remove support for kernel 2.6.39

There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 69 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.39/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-2.6.39/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
deleted file mode 100644
index ee9ddfc4d..000000000
--- a/target/linux/brcm47xx/patches-2.6.39/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jul 2010 14:59:24 +0200
-Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
-
-Swap the first and second serial if console=ttyS1 was set.
-Set it up and register it for early serial support.
-
-This patch has been in OpenWRT for a long time.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/setup.c |   39 ++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 38 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -28,6 +28,8 @@
- #include <linux/types.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -166,6 +168,31 @@ static int bcm47xx_get_invariants(struct
- 	return 0;
- }
- 
-+#ifdef CONFIG_SERIAL_8250
-+static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore)
-+{
-+	int i;
-+
-+	for (i = 0; i < mcore->nr_serial_ports; i++) {
-+		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
-+		struct uart_port s;
-+
-+		memset(&s, 0, sizeof(s));
-+		s.line = i;
-+		s.mapbase = (unsigned int) port->regs;
-+		s.membase = port->regs;
-+		s.irq = port->irq + 2;
-+		s.uartclk = port->baud_base;
-+		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+		s.iotype = SERIAL_IO_MEM;
-+		s.regshift = port->reg_shift;
-+
-+		early_serial_setup(&s);
-+	}
-+	printk(KERN_DEBUG "Serial init done.\n");
-+}
-+#endif
-+
- void __init plat_mem_setup(void)
- {
- 	int err;
-@@ -191,6 +218,10 @@ void __init plat_mem_setup(void)
- 		}
- 	}
- 
-+#ifdef CONFIG_SERIAL_8250
-+	bcm47xx_early_serial_setup(mcore);
-+#endif
-+
- 	_machine_restart = bcm47xx_machine_restart;
- 	_machine_halt = bcm47xx_machine_halt;
- 	pm_power_off = bcm47xx_machine_halt;