diff options
author | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-06-26 20:41:59 +0000 |
---|---|---|
committer | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-06-26 20:41:59 +0000 |
commit | 1fe4998cee9a2c318d694a9109f871109f67dff0 (patch) | |
tree | 1c3c36fd5f358bb19c2b181de417425f68444d82 /target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h | |
parent | 08944ed54ad4ea46d66e2fba2f9c032c074f8eee (diff) |
remove the brcm-2.4 target, it will no longer be supported in future releases. please use brcm47xx with broadcom-wl instead
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21946 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h')
-rw-r--r-- | target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h | 389 |
1 files changed, 0 insertions, 389 deletions
diff --git a/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h b/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h deleted file mode 100644 index e9a5f183d..000000000 --- a/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h +++ /dev/null @@ -1,389 +0,0 @@ -/* - * Broadcom SiliconBackplane hardware register definitions. - * - * Copyright 2007, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - */ - -#ifndef _SBCONFIG_H -#define _SBCONFIG_H -#include "linuxver.h" - -/* cpp contortions to concatenate w/arg prescan */ -#ifndef PAD -#define _PADLINE(line) pad ## line -#define _XSTR(line) _PADLINE(line) -#define PAD _XSTR(__LINE__) -#endif - -/* - * SiliconBackplane Address Map. - * All regions may not exist on all chips. - */ -#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ -#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */ -#define SB_PCI_MEM_SZ (64 * 1024 * 1024) -#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */ -#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ -#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ - -#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ -#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ -#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ -#define SB_ARMCM3_ROM 0x1e000000 /* ARM Cortex-M3 ROM */ -#define SB_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ -#define SB_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ -#define SB_ARM7S_ROM 0x20000000 /* ARM7TDMI-S ROM */ -#define SB_ARMCM3_SRAM2 0x60000000 /* ARM Cortex-M3 SRAM Region 2 */ -#define SB_ARM7S_SRAM2 0x80000000 /* ARM7TDMI-S SRAM Region 2 */ -#define SB_ARM_FLASH1 0xffff0000 /* ARM Flash Region 1 */ -#define SB_ARM_FLASH1_SZ 0x00010000 /* ARM Size of Flash Region 1 */ - -#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */ -#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ -#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 - * (2 ZettaBytes), low 32 bits - */ -#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 - * (2 ZettaBytes), high 32 bits - */ -#define SB_EUART (SB_EXTIF_BASE + 0x00800000) -#define SB_LED (SB_EXTIF_BASE + 0x00900000) - - -/* enumeration space related defs */ -#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ -#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) -#define SB_MAXFUNCS 4 /* max. # functions per core */ -#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ -#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ - -/* mips address */ -#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ - -/* - * Sonics Configuration Space Registers. - */ -#define SBIPSFLAG 0x08 -#define SBTPSFLAG 0x18 -#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ -#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ -#define SBADMATCH3 0x60 -#define SBADMATCH2 0x68 -#define SBADMATCH1 0x70 -#define SBIMSTATE 0x90 -#define SBINTVEC 0x94 -#define SBTMSTATELOW 0x98 -#define SBTMSTATEHIGH 0x9c -#define SBBWA0 0xa0 -#define SBIMCONFIGLOW 0xa8 -#define SBIMCONFIGHIGH 0xac -#define SBADMATCH0 0xb0 -#define SBTMCONFIGLOW 0xb8 -#define SBTMCONFIGHIGH 0xbc -#define SBBCONFIG 0xc0 -#define SBBSTATE 0xc8 -#define SBACTCNFG 0xd8 -#define SBFLAGST 0xe8 -#define SBIDLOW 0xf8 -#define SBIDHIGH 0xfc - -/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have - * a few registers *below* that line. I think it would be very confusing to try - * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here, - */ - -#define SBIMERRLOGA 0xea8 -#define SBIMERRLOG 0xeb0 -#define SBTMPORTCONNID0 0xed8 -#define SBTMPORTLOCK0 0xef8 - -#ifndef _LANGUAGE_ASSEMBLY - -typedef volatile struct _sbconfig { - uint32 PAD[2]; - uint32 sbipsflag; /* initiator port ocp slave flag */ - uint32 PAD[3]; - uint32 sbtpsflag; /* target port ocp slave flag */ - uint32 PAD[11]; - uint32 sbtmerrloga; /* (sonics >= 2.3) */ - uint32 PAD; - uint32 sbtmerrlog; /* (sonics >= 2.3) */ - uint32 PAD[3]; - uint32 sbadmatch3; /* address match3 */ - uint32 PAD; - uint32 sbadmatch2; /* address match2 */ - uint32 PAD; - uint32 sbadmatch1; /* address match1 */ - uint32 PAD[7]; - uint32 sbimstate; /* initiator agent state */ - uint32 sbintvec; /* interrupt mask */ - uint32 sbtmstatelow; /* target state */ - uint32 sbtmstatehigh; /* target state */ - uint32 sbbwa0; /* bandwidth allocation table0 */ - uint32 PAD; - uint32 sbimconfiglow; /* initiator configuration */ - uint32 sbimconfighigh; /* initiator configuration */ - uint32 sbadmatch0; /* address match0 */ - uint32 PAD; - uint32 sbtmconfiglow; /* target configuration */ - uint32 sbtmconfighigh; /* target configuration */ - uint32 sbbconfig; /* broadcast configuration */ - uint32 PAD; - uint32 sbbstate; /* broadcast state */ - uint32 PAD[3]; - uint32 sbactcnfg; /* activate configuration */ - uint32 PAD[3]; - uint32 sbflagst; /* current sbflags */ - uint32 PAD[3]; - uint32 sbidlow; /* identification */ - uint32 sbidhigh; /* identification */ -} sbconfig_t; - -#endif /* _LANGUAGE_ASSEMBLY */ - -/* sbipsflag */ -#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ -#define SBIPS_INT1_SHIFT 0 -#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ -#define SBIPS_INT2_SHIFT 8 -#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ -#define SBIPS_INT3_SHIFT 16 -#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ -#define SBIPS_INT4_SHIFT 24 - -/* sbtpsflag */ -#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ -#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ - -/* sbtmerrlog */ -#define SBTMEL_CM 0x00000007 /* command */ -#define SBTMEL_CI 0x0000ff00 /* connection id */ -#define SBTMEL_EC 0x0f000000 /* error code */ -#define SBTMEL_ME 0x80000000 /* multiple error */ - -/* sbimstate */ -#define SBIM_PC 0xf /* pipecount */ -#define SBIM_AP_MASK 0x30 /* arbitration policy */ -#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ -#define SBIM_AP_TS 0x10 /* use timesliaces only */ -#define SBIM_AP_TK 0x20 /* use token only */ -#define SBIM_AP_RSV 0x30 /* reserved */ -#define SBIM_IBE 0x20000 /* inbanderror */ -#define SBIM_TO 0x40000 /* timeout */ -#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ -#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ - -/* sbtmstatelow */ -#define SBTML_RESET 0x1 /* reset */ -#define SBTML_REJ_MASK 0x6 /* reject */ -#define SBTML_REJ_SHIFT 1 -#define SBTML_CLK 0x10000 /* clock enable */ -#define SBTML_FGC 0x20000 /* force gated clocks on */ -#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ -#define SBTML_PE 0x40000000 /* pme enable */ -#define SBTML_BE 0x80000000 /* bist enable */ - -/* sbtmstatehigh */ -#define SBTMH_SERR 0x1 /* serror */ -#define SBTMH_INT 0x2 /* interrupt */ -#define SBTMH_BUSY 0x4 /* busy */ -#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ -#define SBTMH_FL_MASK 0x0fff0000 /* core-specific flags */ -#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */ -#define SBTMH_GCR 0x20000000 /* gated clock request */ -#define SBTMH_BISTF 0x40000000 /* bist failed */ -#define SBTMH_BISTD 0x80000000 /* bist done */ - - -/* sbbwa0 */ -#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ -#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ -#define SBBWA_TAB1_SHIFT 16 - -/* sbimconfiglow */ -#define SBIMCL_STO_MASK 0x7 /* service timeout */ -#define SBIMCL_RTO_MASK 0x70 /* request timeout */ -#define SBIMCL_RTO_SHIFT 4 -#define SBIMCL_CID_MASK 0xff0000 /* connection id */ -#define SBIMCL_CID_SHIFT 16 - -/* sbimconfighigh */ -#define SBIMCH_IEM_MASK 0xc /* inband error mode */ -#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ -#define SBIMCH_TEM_SHIFT 4 -#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ -#define SBIMCH_BEM_SHIFT 6 - -/* sbadmatch0 */ -#define SBAM_TYPE_MASK 0x3 /* address type */ -#define SBAM_AD64 0x4 /* reserved */ -#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ -#define SBAM_ADINT0_SHIFT 3 -#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ -#define SBAM_ADINT1_SHIFT 3 -#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ -#define SBAM_ADINT2_SHIFT 3 -#define SBAM_ADEN 0x400 /* enable */ -#define SBAM_ADNEG 0x800 /* negative decode */ -#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ -#define SBAM_BASE0_SHIFT 8 -#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ -#define SBAM_BASE1_SHIFT 12 -#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ -#define SBAM_BASE2_SHIFT 16 - -/* sbtmconfiglow */ -#define SBTMCL_CD_MASK 0xff /* clock divide */ -#define SBTMCL_CO_MASK 0xf800 /* clock offset */ -#define SBTMCL_CO_SHIFT 11 -#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ -#define SBTMCL_IF_SHIFT 18 -#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ -#define SBTMCL_IM_SHIFT 24 - -/* sbtmconfighigh */ -#define SBTMCH_BM_MASK 0x3 /* busy mode */ -#define SBTMCH_RM_MASK 0x3 /* retry mode */ -#define SBTMCH_RM_SHIFT 2 -#define SBTMCH_SM_MASK 0x30 /* stop mode */ -#define SBTMCH_SM_SHIFT 4 -#define SBTMCH_EM_MASK 0x300 /* sb error mode */ -#define SBTMCH_EM_SHIFT 8 -#define SBTMCH_IM_MASK 0xc00 /* int mode */ -#define SBTMCH_IM_SHIFT 10 - -/* sbbconfig */ -#define SBBC_LAT_MASK 0x3 /* sb latency */ -#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ -#define SBBC_MAX0_SHIFT 16 -#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ -#define SBBC_MAX1_SHIFT 20 - -/* sbbstate */ -#define SBBS_SRD 0x1 /* st reg disable */ -#define SBBS_HRD 0x2 /* hold reg disable */ - -/* sbidlow */ -#define SBIDL_CS_MASK 0x3 /* config space */ -#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ -#define SBIDL_AR_SHIFT 3 -#define SBIDL_SYNCH 0x40 /* sync */ -#define SBIDL_INIT 0x80 /* initiator */ -#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ -#define SBIDL_MINLAT_SHIFT 8 -#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ -#define SBIDL_MAXLAT_SHIFT 12 -#define SBIDL_FIRST 0x10000 /* this initiator is first */ -#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ -#define SBIDL_CW_SHIFT 18 -#define SBIDL_TP_MASK 0xf00000 /* target ports */ -#define SBIDL_TP_SHIFT 20 -#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ -#define SBIDL_IP_SHIFT 24 -#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ -#define SBIDL_RV_SHIFT 28 -#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */ -#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */ - -/* sbidhigh */ -#define SBIDH_RC_MASK 0x000f /* revision code */ -#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */ -#define SBIDH_RCE_SHIFT 8 -#define SBCOREREV(sbidh) \ - ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) -#define SBIDH_CC_MASK 0x8ff0 /* core code */ -#define SBIDH_CC_SHIFT 4 -#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ -#define SBIDH_VC_SHIFT 16 - -#define SB_COMMIT 0xfd8 /* update buffered registers value */ - -/* vendor codes */ -#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ - -/* core codes */ -#define SB_NODEV 0x700 /* Invalid coreid */ -#define SB_CC 0x800 /* chipcommon core */ -#define SB_ILINE20 0x801 /* iline20 core */ -#define SB_SDRAM 0x803 /* sdram core */ -#define SB_PCI 0x804 /* pci core */ -#define SB_MIPS 0x805 /* mips core */ -#define SB_ENET 0x806 /* enet mac core */ -#define SB_CODEC 0x807 /* v90 codec core */ -#define SB_USB 0x808 /* usb 1.1 host/device core */ -#define SB_ADSL 0x809 /* ADSL core */ -#define SB_ILINE100 0x80a /* iline100 core */ -#define SB_IPSEC 0x80b /* ipsec core */ -#define SB_PCMCIA 0x80d /* pcmcia core */ -#define SB_SOCRAM 0x80e /* internal memory core */ -#define SB_MEMC 0x80f /* memc sdram core */ -#define SB_EXTIF 0x811 /* external interface core */ -#define SB_D11 0x812 /* 802.11 MAC core */ -#define SB_MIPS33 0x816 /* mips3302 core */ -#define SB_USB11H 0x817 /* usb 1.1 host core */ -#define SB_USB11D 0x818 /* usb 1.1 device core */ -#define SB_USB20H 0x819 /* usb 2.0 host core */ -#define SB_USB20D 0x81a /* usb 2.0 device core */ -#define SB_SDIOH 0x81b /* sdio host core */ -#define SB_ROBO 0x81c /* roboswitch core */ -#define SB_ATA100 0x81d /* parallel ATA core */ -#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */ -#define SB_GIGETH 0x81f /* gigabit ethernet core */ -#define SB_PCIE 0x820 /* pci express core */ -#define SB_MIMO 0x821 /* MIMO phy core */ -#define SB_SRAMC 0x822 /* SRAM controller core */ -#define SB_MINIMAC 0x823 /* MINI MAC/phy core */ -#define SB_ARM7S 0x825 /* ARM7tdmi-s core */ -#define SB_SDIOD 0x829 /* SDIO device core */ -#define SB_ARMCM3 0x82a /* ARM Cortex M3 core */ -#define SB_OCP 0x830 /* OCP2OCP bridge core */ -#define SB_SC 0x831 /* shared common core */ -#define SB_AHB 0x832 /* OCP2AHB bridge core */ - -#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */ - -/* Not an enumeration space register, but common to all cores to - * communicate w/PMU regarding Silicon Backplane clocking. - */ -#define SB_CLK_CTL_ST 0x1e0 /* clock control and status */ - -/* clk_ctl_st register */ -#define CCS_FORCEALP 0x00000001 /* force ALP request */ -#define CCS_FORCEHT 0x00000002 /* force HT request */ -#define CCS_FORCEILP 0x00000004 /* force ILP request */ -#define CCS_ALPAREQ 0x00000008 /* ALP Avail Request */ -#define CCS_HTAREQ 0x00000010 /* HT Avail Request */ -#define CCS_FORCEHWREQOFF 0x00000020 /* Force HW Clock Request Off */ -#define CCS_ALPAVAIL 0x00010000 /* ALP is available */ -#define CCS_HTAVAIL 0x00020000 /* HT is available */ -#define CCS0_HTAVAIL 0x00010000 /* HT avail in chipc and pcmcia on 4328a0 */ -#define CCS0_ALPAVAIL 0x00020000 /* ALP avail in chipc and pcmcia on 4328a0 */ - -/* Not really related to Silicon Backplane, but a couple of software - * conventions for the use the flash space: - */ - -/* Minumum amount of flash we support */ -#define FLASH_MIN 0x00020000 /* Minimum flash size */ - -/* A boot/binary may have an embedded block that describes its size */ -#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ -#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */ -#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ -#define BISZ_TXTST_IDX 1 /* 1: text start */ -#define BISZ_TXTEND_IDX 2 /* 2: text end */ -#define BISZ_DATAST_IDX 3 /* 3: data start */ -#define BISZ_DATAEND_IDX 4 /* 4: data end */ -#define BISZ_BSSST_IDX 5 /* 5: bss start */ -#define BISZ_BSSEND_IDX 6 /* 6: bss end */ -#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */ - -#endif /* _SBCONFIG_H */ |