summaryrefslogtreecommitdiffstats
path: root/target/linux/brcm-2.4/base-files
diff options
context:
space:
mode:
authorjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>2007-09-25 08:34:30 +0000
committerjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>2007-09-25 08:34:30 +0000
commit38e3914d5bf79ef4085ef1f196cbdb9136c65b53 (patch)
tree6dd2199bf8c9ac76344c048b2c92aaefd47a03ac /target/linux/brcm-2.4/base-files
parent1cf58b2914a1cea9f1f7d348d805d49ac3770a0b (diff)
[brcm-2.4] fix vlan configuration on Dell TrueMobile 2300
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9015 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm-2.4/base-files')
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/default/etc/init.d/netconfig14
1 files changed, 9 insertions, 5 deletions
diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
index 2b5696336..643ba35d3 100755
--- a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
@@ -47,11 +47,11 @@ start() {
mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
}
}
-
+
($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
nvram[$1] = $2
}
-
+
END {
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
c["wan_ifname"] = ""
@@ -61,6 +61,10 @@ start() {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
}
+ if (model == "Dell TrueMobile 2300") {
+ c["vlan0ports"] = "0 1 2 3 5*"
+ c["vlan1ports"] = "4 5"
+ }
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
c["lan_ifname"] = "eth0"
@@ -100,10 +104,10 @@ start() {
c["lan_ifname"]="eth0"
c["wan_ifname"]=""
}
-
+
# ASUS WL-700gE
# These are actually same as defaults above. For some reason this script applies
- # Generic BCM94704 settings instead so we revert to proper settings here.
+ # Generic BCM94704 settings instead so we revert to proper settings here.
# Hopefully someone will fix this properly soon.
if (model == "ASUS WL-700gE") {
c["lan_ifname"]="eth0.0"
@@ -116,7 +120,7 @@ start() {
c["vlan0ports"]="0 1 2 3 5*"
c["vlan1ports"]="4 5"
}
-
+
print "#### VLAN configuration "
print "config switch eth0"
p("vlan0", "vlan0ports")