remove the brcm-2.4 target, it will no longer be supported in future releases. please use brcm47xx with broadcom-wl instead

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21946 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 0 insertions, 132 deletions

diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
deleted file mode 100644
index b0f4a4efa..000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-init_hotplug_failsafe() {
-	echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
-}
-
-boot_hook_add preinit_main init_hotplug_failsafe
-
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm
deleted file mode 100644
index 3cd760e2d..000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-
-set_preinit_iface() {
-	ifname=eth0
-
-	insmod diag
-
-	# hardware specific overrides
-	case "$(cat /proc/diag/model)" in
-		"Linksys WAP54G V1") ifname=eth1;;
-		"ASUS WL-HDD") ifname=eth1;;
-		"ASUS WL-300g") ifname=eth1;;
-		"ASUS (unknown, BCM4702)") ifname=eth1;;
-		"Sitecom WL-105b") ifname=eth1;;
-	esac
-	ifconfig $ifname 0.0.0.0 up
-}
-
-check_module () {
-  module="$1"; shift; params="$*"
-
-  insmod "$module" "$params"
-  sleep 1
-  grep "^$module" /proc/modules
-  return $?
-}
-
-init_iface() {
-	check_module tg3
-	insmod switch-core
-	check_module switch-robo || check_module switch-adm  || { 
-	  check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
-	} || rmmod switch-core
-}
-
-boot_hook_add preinit_main set_preinit_iface
-boot_hook_add preinit_main init_iface
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm
deleted file mode 100644
index a93559f97..000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-failsafe_ip() {
-	[ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
-		ifconfig eth0 0.0.0.0 down
-		echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-	}
-	
-	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-        	ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
-        }
-}
-
-boot_hook_add failsafe failsafe_ip
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm
deleted file mode 100644
index fd5add16a..000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-do_mount_procfs() {
-	mount none /proc -t proc
-}
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm
deleted file mode 100644
index fdc7c71ca..000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-port_net_echo() {
-	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-		if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then 
-			netmsg $pi_broadcast "$1"
-		fi
-	}
-}
-
-preinit_ip_deconfig() {
-	if [ -z "$pi_ifname" ]; then
-		ifconfig $ifname 0.0.0.0 down
-	else
-		grep -q "$pi_ifname" /proc/net/dev && {
-			ifconfig $pi_ifname 0.0.0.0 down
-		}
-	fi
-}
-
-preinit_net_echo() {
-	preinit_ip
-	
-	[ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
-		echo 1 > /proc/switch/eth0/reset
-
-		# this would be easier if we blasted the message across all ports
-		# but we don't want packets leaking across interfaces
-		for port in $(seq 0 4); do {
-			echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-			port_net_echo $1
-		}; done
-		
-		echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-		
-	} || port_net_echo $1
-}
-
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm
deleted file mode 100644
index f030cb283..000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-indicate_failsafe() {
-	preinit_net_echo() {
-		port_net_echo $1
-	}
-	echo "- failsafe -"
-	preinit_net_echo "Entering Failsafe!\n"
-	indicate_failsafe_led
-}
-
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm
deleted file mode 100644
index da721b848..000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh
-
-. /etc/functions.sh
-
-set_boot_wait() {
-	[ -x "/usr/sbin/nvram" ] && {
-		[ "$(nvram get boot_wait)" != "on" ] && {
-			nvram set boot_wait=on
-			nvram commit
-		}
-	}
-}
-
-boot_hook_add failsafe set_boot_wait