remove the brcm-2.4 target, it will no longer be supported in future releases. please use brcm47xx with broadcom-wl instead

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21946 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 248 deletions

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
deleted file mode 100755
index d7839b6b4..000000000
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
-	[ -e /etc/config/network ] && {
-		local batch
-
-		config_cb() {
-			case "$1" in
-			switch)
-				option_cb() {
-					case "$1" in
-					vlan[0-9]|vlan1[0-5])
-						local id="${1#vlan}"
-						local ports="${2%\*}"
-						append batch "delete network.eth0.${1}${N}"
-						append batch "set network.eth0_${id}=switch_vlan${N}"
-						append batch "set network.eth0_${id}.device=eth0${N}"
-						append batch "set network.eth0_${id}.vlan=${id}${N}"
-						append batch "set network.eth0_${id}.ports='${ports}'${N}"
-					;;
-					esac
-				}
-			;;
-			switch_vlan)
-				option_cb() { :; }
-				batch=""
-			;;
-			esac
-		}
-
-		config_load network
-
-		[ -n "$batch" ] && {
-			logger -t netconfig "migrating switch config to new format ..."
-			echo "$batch${N}commit network" | uci batch
-		}
-
-		exit 0
-	}
-
-	mkdir -p /etc/config
-
-	(
-		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
-			# WGT634u
-			echo boardtype=wgt634u
-		else
-			strings "$(find_mtd_part nvram)"
-		fi
-	) | awk '
-	function p(cfgname, name) {
-		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
-	}
-
-	function vlan(id, name) {
-		if (c[name] != "") {
-			print "config switch_vlan eth0_" id
-			print "	option device   \"eth0\""
-			print "	option vlan     " id
-			print "	option ports    \"" c[name] "\""
-			print ""
-		}
-	}
-
-	function macinc(mac, maca, i, result) {
-		split(mac, maca, ":")
-		for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
-		if (++maca[6] > 0xff) {
-			maca[5]++
-			maca[6] = 0
-		}
-		for (i = 1; i <= 6; i++) {
-			if (i != 1) result = result ":"
-			result = result sprintf("%02x", maca[i])
-		}
-		return result
-	}
-
-	BEGIN {
-		FS="="
-		c["lan_ifname"]="eth0.0"
-		c["wan_ifname"]="eth0.1"
-		c["vlan0ports"]="1 2 3 4 5"
-		c["vlan1ports"]="0 5"
-		getline < "/proc/diag/model"
-		model=$0
-		for (i = 0; i < 6; i++) {
-			if (mac_check != "") mac_check = mac_check ":"
-			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
-		}
-	}
-
-	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
-		nvram[$1] = $2
-	}
-
-	END {
-		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
-			c["wan_ifname"] = ""
-			c["lan_ifname"] = "eth1"
-		}
-		if (model == "ASUS WL-330gE") {
-			c["wan_ifname"] = ""
-			c["lan_ifname"] = "eth0"
-			c["vlan0ports"] = ""
-			c["vlan1ports"] = ""
-		}
-		if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
-			c["wan_ifname"] = "eth1"
-			c["lan_ifname"] = "eth0"
-		}
-		if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
-			c["vlan0ports"] = "0 1 2 3 5"
-			c["vlan1ports"] = "4 5"
-		}
-		if (model == "Dell TrueMobile 2300") {
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-			c["vlan0ports"] = "0 1 2 3 4 5u"
-			c["vlan1ports"] = ""
-		}
-		if (nvram["boardtype"] == "bcm94710r4") {
-			# Toshiba WRC-1000
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-		}
-		if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
-			c["vlan0ports"] = "0 1 2 3 5"
-			c["vlan1ports"] = "4 5"
-		}
-		if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
-			if (nvram["boardnum"] == "45") {
-				# WL-500gP
-				c["vlan0ports"] = "1 2 3 4 5"
-				c["vlan1ports"] = "0 5"
-			} else {
-				# Generic BCM94704
-				c["vlan0ports"] = "0 1 2 3 4 5u"
-				c["vlan1ports"] = ""
-				c["lan_ifname"] = "eth0"
-				c["wan_ifname"] = "eth1"
-
-				# MAC addresses on 4704 tend to be screwed up. Add a workaround here
-				if (nvram["et0macaddr"] ~ mac_check) {
-					c["lan_macaddr"] = nvram["et0macaddr"]
-					c["wan_macaddr"] = macinc(c["lan_macaddr"])
-				}
-			}
-		}
-		# Buffalo WBR-B11 and Buffalo WBR-G54
-		if (nvram["boardtype"] == "bcm94710ap") {
-			c["vlan0ports"] = "0 1 2 3 4 5u"
-			c["vlan1ports"] = ""
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-		}
-		# generic broadcom 4705/4785 processor with 5397 switch?
-		#  EXCEPT Linksys WRT300N V1.1
-		if ((nvram["boardtype"] == "0x478") && \
-		    (model != "Linksys WRT300N V1.1")) {
-			c["vlan0ports"] = "1 2 3 4 8*"
-			c["vlan1ports"] = "0 8"
-		}
-
-		# WAP54G
-		if ((nvram["boardnum"] == "2") || \
-			(nvram["boardnum"] == "1024")) {
-			c["lan_ifname"]="eth0"
-			c["wan_ifname"]=""
-		}
-
-		# Sitecom WL-105b
-		if ((nvram["boardum"] == "2") && \
-			(nvram["GemtekPmonVer"] == "1")) {
-			c["lan_ifname"]="eth0"
-			c["wan_ifname"]=""
-		}
-
-		# ASUS WL-700gE
-		# These are actually same as defaults above. For some reason this script applies
-		# Generic BCM94704 settings instead so we revert to proper settings here.
-		# Hopefully someone will fix this properly soon.
-		if (model == "ASUS WL-700gE") {
-			c["lan_ifname"]="eth0.0"
-			c["wan_ifname"]="eth0.1"
-			c["vlan0ports"]="1 2 3 4 5"
-			c["vlan1ports"]="0 5"
-		}
-
-		if (model == "Motorola WR850G V2/V3") {
-			c["vlan0ports"]="0 1 2 3 5"
-			c["vlan1ports"]="4 5"
-		}
-		if (model == "ASUS WL-500W") {
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-			c["vlan0ports"] = "0 1 2 3 4 5u"
-			c["vlan1ports"] = ""
-		}
-		if (model == "OvisLink WL-1600GL") {
-			c["lan_ifname"] = "eth0.0"
-			c["wan_ifname"] = "eth0.1"
-			c["vlan0ports"] = "0 1 2 3 5"
-			c["vlan1ports"] = "4 5"
-		}
-
-		if (c["vlan0ports"] || c["vlan1ports"]) {
-			print "#### VLAN configuration "
-			print "config switch eth0"
-			print "	option enable   1"
-			print ""		
-			vlan(0, "vlan0ports")
-			vlan(1, "vlan1ports")
-		}
-		print "#### Loopback configuration"
-		print "config interface loopback"
-		print "	option ifname	\"lo\""
-		print "	option proto	static"
-		print "	option ipaddr	127.0.0.1"
-		print "	option netmask	255.0.0.0"
-		print ""
-		print ""
-		print "#### LAN configuration"
-		print "config interface lan"
-		print "	option type 	bridge"
-		p("ifname", "lan_ifname")
-		p("macaddr", "lan_macaddr")
-		print "	option proto	static"
-		print "	option ipaddr	192.168.1.1"
-		print "	option netmask	255.255.255.0"
-		print ""
-		print ""
-		if (c["wan_ifname"]) {
-			print "#### WAN configuration"
-			print "config interface	wan"
-			p("ifname", "wan_ifname")
-			p("macaddr", "wan_macaddr")
-			print "	option proto	dhcp"
-		} else {
-			print "#### WAN configuration (disabled)"
-			print "#config interface wan"
-			print "#	option proto	dhcp"
-		}
-	}' > /etc/config/network
-}