add generic GPIO to MIPS boards, use it for au1000 and for the MTX-1 led driver as well

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7334 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 32 insertions, 40 deletions

diff --git a/target/linux/au1000-2.6/config/default b/target/linux/au1000-2.6/config/default
index 7953251f6..09afbd9cb 100644
--- a/target/linux/au1000-2.6/config/default
+++ b/target/linux/au1000-2.6/config/default
@@ -2,10 +2,13 @@ CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_8139TOO is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 # CONFIG_ATM is not set
 # CONFIG_B44 is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_BITREVERSE=y
+# CONFIG_BROADCOM_PHY is not set
 CONFIG_CHR_DEV_SG=m
 CONFIG_CMDLINE="root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit"
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -45,12 +48,15 @@ CONFIG_DMA_NONCOHERENT=y
 CONFIG_DUMMY=m
 CONFIG_ELF_CORE=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_HAMRADIO is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=y
 CONFIG_HZ=250
@@ -64,44 +70,17 @@ CONFIG_I2C=m
 CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_ALGOPCF=m
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_AU1X00GPIO=m
 CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
 # CONFIG_IDE is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_LAN_SAA9730 is not set
 CONFIG_LEDS_MTX1=y
 # CONFIG_LEDS_TRIGGERS is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_MACH_VR41XX is not set
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_MINI_FO=y
 CONFIG_MIPS=y
 # CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_AU1X00_ENET=y
@@ -138,6 +117,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MTD=y
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_ALCHEMY is not set
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_MTD_BLOCK2MTD is not set
 CONFIG_MTD_CFI=y
@@ -182,33 +162,38 @@ CONFIG_MTD_PARTITIONS=y
 CONFIG_MTX1_WATCHDOG=y
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
+CONFIG_NET_SCH_FIFO=y
 # CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CT_ACCT=y
+# CONFIG_NF_NAT_AMANDA is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+CONFIG_NF_NAT_SIP=m
+# CONFIG_NF_NAT_TFTP is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PCCARD is not set
 # CONFIG_PCIPCWATCHDOG is not set
 CONFIG_PHYLIB=y
-# CONFIG_PM is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNPACPI is not set
 # CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_QSEMI_PHY is not set
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_RTC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 CONFIG_SERIAL_8250_AU1X00=y
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
@@ -235,10 +220,12 @@ CONFIG_SOFT_WATCHDOG=m
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_STANDALONE is not set
 CONFIG_STRIP=m
-CONFIG_SYN_COOKIES=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_KGDB=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 # CONFIG_TMD_HERMES is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
@@ -247,10 +234,15 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_VIA_RHINE is not set
+CONFIG_ZONE_DMA=y
+CONFIG_ZONE_DMA_FLAG=1