atheros: remove support for older kernels

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25721 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 1596 deletions

diff --git a/target/linux/atheros/patches-2.6.30/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.30/110-ar2313_ethernet.patch
deleted file mode 100644
index fa9eead51..000000000
--- a/target/linux/atheros/patches-2.6.30/110-ar2313_ethernet.patch
+++ /dev/null
@@ -1,1596 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -369,6 +369,12 @@ config AX88796_93CX6
- 	help
- 	  Select this if your platform comes with an external 93CX6 eeprom.
- 
-+config AR231X_ETHERNET
-+	tristate "AR231x Ethernet support"
-+	depends on ATHEROS_AR231X
-+	help
-+	  Support for the AR231x/531x ethernet controller
-+
- config MACE
- 	tristate "MACE (Power Mac ethernet) support"
- 	depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -203,6 +203,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-+obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
---- /dev/null
-+++ b/drivers/net/ar231x.c
-@@ -0,0 +1,1263 @@
-+/*
-+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * 	This code is taken from John Taylor's Sibyte driver and then
-+ * 	modified for the AR2313.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+#define AR2313_MTU                     1692
-+#define AR2313_PRIOS                   1
-+#define AR2313_QUEUES                  (2*AR2313_PRIOS)
-+#define AR2313_DESCR_ENTRIES           64
-+
-+
-+#ifndef min
-+#define min(a,b)	(((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES	L1_CACHE_BYTES
-+#endif
-+
-+#define AR2313_MBOX_SET_BIT  0x8
-+
-+#include "ar231x.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ *     RX_LOW_BUF_THRES    - allocate buffers in the bottom half
-+ *     RX_PANIC_LOW_THRES  - we are very low on buffers, allocate
-+ *                           the buffers in the interrupt handler
-+ *     RX_RING_THRES       - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers.  This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE		AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES	        (RX_RING_SIZE/4)
-+#define RX_LOW_THRES	        ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN                 4
-+#define RX_OFFSET               2
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#define VLAN_HDR                4
-+#else
-+#define VLAN_HDR                0
-+#endif
-+
-+#define AR2313_BUFSIZE		(AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-+MODULE_DESCRIPTION("AR231x Ethernet driver");
-+#endif
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static void ar231x_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void rx_tasklet_cleanup(struct net_device *dev);
-+static void ar231x_multicast_list(struct net_device *dev);
-+
-+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-+static int ar231x_mdiobus_reset(struct mii_bus *bus);
-+static int ar231x_mdiobus_probe (struct net_device *dev);
-+static void ar231x_adjust_link(struct net_device *dev);
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+static const struct net_device_ops ar231x_ops = {
-+	.ndo_open = ar231x_open,
-+	.ndo_stop = ar231x_close,
-+	.ndo_start_xmit = ar231x_start_xmit,
-+	.ndo_set_multicast_list = ar231x_multicast_list,
-+	.ndo_do_ioctl = ar231x_ioctl,
-+};
-+
-+int __init ar231x_probe(struct platform_device *pdev)
-+{
-+	struct net_device *dev;
-+	struct ar231x_private *sp;
-+	struct resource *res;
-+	unsigned long ar_eth_base;
-+	char buf[64];
-+
-+	dev = alloc_etherdev(sizeof(struct ar231x_private));
-+
-+	if (dev == NULL) {
-+		printk(KERN_ERR
-+			   "ar231x: Unable to allocate net_device structure!\n");
-+		return -ENOMEM;
-+	}
-+
-+	platform_set_drvdata(pdev, dev);
-+
-+	sp = netdev_priv(dev);
-+	sp->dev = dev;
-+	sp->cfg = pdev->dev.platform_data;
-+
-+	sprintf(buf, "eth%d_membase", pdev->id);
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
-+	if (!res)
-+		return -ENODEV;
-+
-+	sp->link = 0;
-+	ar_eth_base = res->start;
-+
-+	sprintf(buf, "eth%d_irq", pdev->id);
-+	dev->irq = platform_get_irq_byname(pdev, buf);
-+
-+	spin_lock_init(&sp->lock);
-+
-+	dev->features |= NETIF_F_HIGHDMA;
-+	dev->netdev_ops = &ar231x_ops;
-+
-+	tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+	tasklet_disable(&sp->rx_tasklet);
-+
-+	sp->eth_regs =
-+		ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
-+	if (!sp->eth_regs) {
-+		printk("Can't remap eth registers\n");
-+		return (-ENXIO);
-+	}
-+
-+	/*
-+	 * When there's only one MAC, PHY regs are typically on ENET0,
-+	 * even though the MAC might be on ENET1.
-+	 * Needto remap PHY regs separately in this case
-+	 */
-+	if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
-+		sp->phy_regs = sp->eth_regs;
-+	else {
-+		sp->phy_regs =
-+			ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
-+							sizeof(*sp->phy_regs));
-+		if (!sp->phy_regs) {
-+			printk("Can't remap phy registers\n");
-+			return (-ENXIO);
-+		}
-+	}
-+
-+	sp->dma_regs =
-+		ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
-+						sizeof(*sp->dma_regs));
-+	dev->base_addr = (unsigned int) sp->dma_regs;
-+	if (!sp->dma_regs) {
-+		printk("Can't remap DMA registers\n");
-+		return (-ENXIO);
-+	}
-+
-+	sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
-+	if (!sp->int_regs) {
-+		printk("Can't remap INTERRUPT registers\n");
-+		return (-ENXIO);
-+	}
-+
-+	strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
-+	sp->name[sizeof(sp->name) - 1] = '\0';
-+	memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
-+
-+	if (ar231x_init(dev)) {
-+		/*
-+		 * ar231x_init() calls ar231x_init_cleanup() on error.
-+		 */
-+		kfree(dev);
-+		return -ENODEV;
-+	}
-+
-+	if (register_netdev(dev)) {
-+		printk("%s: register_netdev failed\n", __func__);
-+		return -1;
-+	}
-+
-+	printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+		   dev->name, sp->name,
-+		   dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+		   dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
-+
-+	sp->mii_bus = mdiobus_alloc();
-+	if (sp->mii_bus == NULL)
-+		return -1;
-+
-+	sp->mii_bus->priv = dev;
-+	sp->mii_bus->read = ar231x_mdiobus_read;
-+	sp->mii_bus->write = ar231x_mdiobus_write;
-+	sp->mii_bus->reset = ar231x_mdiobus_reset;
-+	sp->mii_bus->name = "ar231x_eth_mii";
-+	snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
-+	sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
-+	*sp->mii_bus->irq = PHY_POLL;
-+
-+	mdiobus_register(sp->mii_bus);
-+
-+	if (ar231x_mdiobus_probe(dev) != 0) {
-+		printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
-+		rx_tasklet_cleanup(dev);
-+		ar231x_init_cleanup(dev);
-+		unregister_netdev(dev);
-+		kfree(dev);
-+		return -ENODEV;
-+	}
-+
-+	/* start link poll timer */
-+	ar231x_setup_timer(dev);
-+
-+	return 0;
-+}
-+
-+
-+static void ar231x_multicast_list(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int filter;
-+
-+	filter = sp->eth_regs->mac_control;
-+
-+	if (dev->flags & IFF_PROMISC)
-+		filter |= MAC_CONTROL_PR;
-+	else
-+		filter &= ~MAC_CONTROL_PR;
-+	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
-+		filter |= MAC_CONTROL_PM;
-+	else
-+		filter &= ~MAC_CONTROL_PM;
-+
-+	sp->eth_regs->mac_control = filter;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	/*
-+	 * Tasklet may be scheduled. Need to get it removed from the list
-+	 * since we're about to free the struct.
-+	 */
-+
-+	sp->unloading = 1;
-+	tasklet_enable(&sp->rx_tasklet);
-+	tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int __devexit ar231x_remove(struct platform_device *pdev)
-+{
-+	struct net_device *dev = platform_get_drvdata(pdev);
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	rx_tasklet_cleanup(dev);
-+	ar231x_init_cleanup(dev);
-+	unregister_netdev(dev);
-+	mdiobus_unregister(sp->mii_bus);
-+	mdiobus_free(sp->mii_bus);
-+	kfree(dev);
-+	return 0;
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar231x_restart(struct net_device *dev)
-+{
-+	/* disable interrupts */
-+	disable_irq(dev->irq);
-+
-+	/* stop mac */
-+	ar231x_halt(dev);
-+
-+	/* initialize */
-+	ar231x_init(dev);
-+
-+	/* enable interrupts */
-+	enable_irq(dev->irq);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver ar231x_driver = {
-+	.driver.name = "ar231x-eth",
-+	.probe = ar231x_probe,
-+	.remove = __devexit_p(ar231x_remove),
-+};
-+
-+int __init ar231x_module_init(void)
-+{
-+	return platform_driver_register(&ar231x_driver);
-+}
-+
-+void __exit ar231x_module_cleanup(void)
-+{
-+	platform_driver_unregister(&ar231x_driver);
-+}
-+
-+module_init(ar231x_module_init);
-+module_exit(ar231x_module_cleanup);
-+
-+
-+static void ar231x_free_descriptors(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	if (sp->rx_ring != NULL) {
-+		kfree((void *) KSEG0ADDR(sp->rx_ring));
-+		sp->rx_ring = NULL;
-+		sp->tx_ring = NULL;
-+	}
-+}
-+
-+
-+static int ar231x_allocate_descriptors(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	int size;
-+	int j;
-+	ar231x_descr_t *space;
-+
-+	if (sp->rx_ring != NULL) {
-+		printk("%s: already done.\n", __FUNCTION__);
-+		return 0;
-+	}
-+
-+	size =
-+		(sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+	space = kmalloc(size, GFP_KERNEL);
-+	if (space == NULL)
-+		return 1;
-+
-+	/* invalidate caches */
-+	dma_cache_inv((unsigned int) space, size);
-+
-+	/* now convert pointer to KSEG1 */
-+	space = (ar231x_descr_t *) KSEG1ADDR(space);
-+
-+	memset((void *) space, 0, size);
-+
-+	sp->rx_ring = space;
-+	space += AR2313_DESCR_ENTRIES;
-+
-+	sp->tx_ring = space;
-+	space += AR2313_DESCR_ENTRIES;
-+
-+	/* Initialize the transmit Descriptors */
-+	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+		ar231x_descr_t *td = &sp->tx_ring[j];
-+		td->status = 0;
-+		td->devcs = DMA_TX1_CHAINED;
-+		td->addr = 0;
-+		td->descr =
-+			virt_to_phys(&sp->
-+						 tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar231x_init_cleanup(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	struct sk_buff *skb;
-+	int j;
-+
-+	ar231x_free_descriptors(dev);
-+
-+	if (sp->eth_regs)
-+		iounmap((void *) sp->eth_regs);
-+	if (sp->dma_regs)
-+		iounmap((void *) sp->dma_regs);
-+
-+	if (sp->rx_skb) {
-+		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+			skb = sp->rx_skb[j];
-+			if (skb) {
-+				sp->rx_skb[j] = NULL;
-+				dev_kfree_skb(skb);
-+			}
-+		}
-+		kfree(sp->rx_skb);
-+		sp->rx_skb = NULL;
-+	}
-+
-+	if (sp->tx_skb) {
-+		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+			skb = sp->tx_skb[j];
-+			if (skb) {
-+				sp->tx_skb[j] = NULL;
-+				dev_kfree_skb(skb);
-+			}
-+		}
-+		kfree(sp->tx_skb);
-+		sp->tx_skb = NULL;
-+	}
-+}
-+
-+static int ar231x_setup_timer(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	init_timer(&sp->link_timer);
-+
-+	sp->link_timer.function = ar231x_link_timer_fn;
-+	sp->link_timer.data = (int) dev;
-+	sp->link_timer.expires = jiffies + HZ;
-+
-+	add_timer(&sp->link_timer);
-+	return 0;
-+
-+}
-+
-+static void ar231x_link_timer_fn(unsigned long data)
-+{
-+	struct net_device *dev = (struct net_device *) data;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	// see if the link status changed
-+	// This was needed to make sure we set the PHY to the
-+	// autonegotiated value of half or full duplex.
-+	ar231x_check_link(dev);
-+
-+	// Loop faster when we don't have link.
-+	// This was needed to speed up the AP bootstrap time.
-+	if (sp->link == 0) {
-+		mod_timer(&sp->link_timer, jiffies + HZ / 2);
-+	} else {
-+		mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+	}
-+}
-+
-+static void ar231x_check_link(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	u16 phyData;
-+
-+	phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
-+	if (sp->phyData != phyData) {
-+		if (phyData & BMSR_LSTATUS) {
-+			/* link is present, ready link partner ability to deterine
-+			   duplexity */
-+			int duplex = 0;
-+			u16 reg;
-+
-+			sp->link = 1;
-+			reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
-+			if (reg & BMCR_ANENABLE) {
-+				/* auto neg enabled */
-+				reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
-+				duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
-+			} else {
-+				/* no auto neg, just read duplex config */
-+				duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
-+			}
-+
-+			printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
-+				   dev->name, (duplex) ? "full" : "half");
-+
-+			if (duplex) {
-+				/* full duplex */
-+				sp->eth_regs->mac_control =
-+					((sp->eth_regs->
-+					  mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
-+			} else {
-+				/* half duplex */
-+				sp->eth_regs->mac_control =
-+					((sp->eth_regs->
-+					  mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
-+			}
-+		} else {
-+			/* no link */
-+			sp->link = 0;
-+		}
-+		sp->phyData = phyData;
-+	}
-+}
-+
-+static int ar231x_reset_reg(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int ethsal, ethsah;
-+	unsigned int flags;
-+
-+	*sp->int_regs |= sp->cfg->reset_mac;
-+	mdelay(10);
-+	*sp->int_regs &= ~sp->cfg->reset_mac;
-+	mdelay(10);
-+	*sp->int_regs |= sp->cfg->reset_phy;
-+	mdelay(10);
-+	*sp->int_regs &= ~sp->cfg->reset_phy;
-+	mdelay(10);
-+
-+	sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+	mdelay(10);
-+	sp->dma_regs->bus_mode =
-+		((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+	/* enable interrupts */
-+	sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+							  DMA_STATUS_NIS |
-+							  DMA_STATUS_RI |
-+							  DMA_STATUS_TI | DMA_STATUS_FBE);
-+	sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
-+	sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
-+	sp->dma_regs->control =
-+		(DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+	sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+	sp->eth_regs->vlan_tag = (0x8100);
-+
-+	/* Enable Ethernet Interface */
-+	flags = (MAC_CONTROL_TE |	/* transmit enable */
-+			 MAC_CONTROL_PM |	/* pass mcast */
-+			 MAC_CONTROL_F |	/* full duplex */
-+			 MAC_CONTROL_HBD);	/* heart beat disabled */
-+
-+	if (dev->flags & IFF_PROMISC) {	/* set promiscuous mode */
-+		flags |= MAC_CONTROL_PR;
-+	}
-+	sp->eth_regs->mac_control = flags;
-+
-+	/* Set all Ethernet station address registers to their initial values */
-+	ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+			  (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+	ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+			  (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+			  (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+			  (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+	sp->eth_regs->mac_addr[0] = ethsah;
-+	sp->eth_regs->mac_addr[1] = ethsal;
-+
-+	mdelay(10);
-+
-+	return (0);
-+}
-+
-+
-+static int ar231x_init(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	int ecode = 0;
-+
-+	/*
-+	 * Allocate descriptors
-+	 */
-+	if (ar231x_allocate_descriptors(dev)) {
-+		printk("%s: %s: ar231x_allocate_descriptors failed\n",
-+			   dev->name, __FUNCTION__);
-+		ecode = -EAGAIN;
-+		goto init_error;
-+	}
-+
-+	/*
-+	 * Get the memory for the skb rings.
-+	 */
-+	if (sp->rx_skb == NULL) {
-+		sp->rx_skb =
-+			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+					GFP_KERNEL);
-+		if (!(sp->rx_skb)) {
-+			printk("%s: %s: rx_skb kmalloc failed\n",
-+				   dev->name, __FUNCTION__);
-+			ecode = -EAGAIN;
-+			goto init_error;
-+		}
-+	}
-+	memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+	if (sp->tx_skb == NULL) {
-+		sp->tx_skb =
-+			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+					GFP_KERNEL);
-+		if (!(sp->tx_skb)) {
-+			printk("%s: %s: tx_skb kmalloc failed\n",
-+				   dev->name, __FUNCTION__);
-+			ecode = -EAGAIN;
-+			goto init_error;
-+		}
-+	}
-+	memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+	/*
-+	 * Set tx_csm before we start receiving interrupts, otherwise
-+	 * the interrupt handler might think it is supposed to process
-+	 * tx ints before we are up and running, which may cause a null
-+	 * pointer access in the int handler.
-+	 */
-+	sp->rx_skbprd = 0;
-+	sp->cur_rx = 0;
-+	sp->tx_prd = 0;
-+	sp->tx_csm = 0;
-+
-+	/*
-+	 * Zero the stats before starting the interface
-+	 */
-+	memset(&dev->stats, 0, sizeof(dev->stats));
-+
-+	/*
-+	 * We load the ring here as there seem to be no way to tell the
-+	 * firmware to wipe the ring without re-initializing it.
-+	 */
-+	ar231x_load_rx_ring(dev, RX_RING_SIZE);
-+
-+	/*
-+	 * Init hardware
-+	 */
-+	ar231x_reset_reg(dev);
-+
-+	/*
-+	 * Get the IRQ
-+	 */
-+	ecode =
-+		request_irq(dev->irq, &ar231x_interrupt,
-+					IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-+					dev->name, dev);
-+	if (ecode) {
-+		printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+			   dev->name, __FUNCTION__, dev->irq);
-+		goto init_error;
-+	}
-+
-+
-+	tasklet_enable(&sp->rx_tasklet);
-+
-+	return 0;
-+
-+  init_error:
-+	ar231x_init_cleanup(dev);
-+	return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	short i, idx;
-+
-+	idx = sp->rx_skbprd;
-+
-+	for (i = 0; i < nr_bufs; i++) {
-+		struct sk_buff *skb;
-+		ar231x_descr_t *rd;
-+
-+		if (sp->rx_skb[idx])
-+			break;
-+
-+		skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
-+		if (!skb) {
-+			printk("\n\n\n\n %s: No memory in system\n\n\n\n",
-+				   __FUNCTION__);
-+			break;
-+		}
-+
-+		/*
-+		 * Make sure IP header starts on a fresh cache line.
-+		 */
-+		skb->dev = dev;
-+		skb_reserve(skb, RX_OFFSET);
-+		sp->rx_skb[idx] = skb;
-+
-+		rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-+
-+		/* initialize dma descriptor */
-+		rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+					 DMA_RX1_CHAINED);
-+		rd->addr = virt_to_phys(skb->data);
-+		rd->descr =
-+			virt_to_phys(&sp->
-+						 rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+		rd->status = DMA_RX_OWN;
-+
-+		idx = DSC_NEXT(idx);
-+	}
-+
-+	if (i)
-+		sp->rx_skbprd = idx;
-+
-+	return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL        64
-+
-+static int ar231x_rx_int(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	struct sk_buff *skb, *skb_new;
-+	ar231x_descr_t *rxdesc;
-+	unsigned int status;
-+	u32 idx;
-+	int pkts = 0;
-+	int rval;
-+
-+	idx = sp->cur_rx;
-+
-+	/* process at most the entire ring and then wait for another interrupt
-+	 */
-+	while (1) {
-+
-+		rxdesc = &sp->rx_ring[idx];
-+		status = rxdesc->status;
-+		if (status & DMA_RX_OWN) {
-+			/* SiByte owns descriptor or descr not yet filled in */
-+			rval = 0;
-+			break;
-+		}
-+
-+		if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+			rval = 1;
-+			break;
-+		}
-+
-+		if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
-+			dev->stats.rx_errors++;
-+			dev->stats.rx_dropped++;
-+
-+			/* add statistics counters */
-+			if (status & DMA_RX_ERR_CRC)
-+				dev->stats.rx_crc_errors++;
-+			if (status & DMA_RX_ERR_COL)
-+				dev->stats.rx_over_errors++;
-+			if (status & DMA_RX_ERR_LENGTH)
-+				dev->stats.rx_length_errors++;
-+			if (status & DMA_RX_ERR_RUNT)
-+				dev->stats.rx_over_errors++;
-+			if (status & DMA_RX_ERR_DESC)
-+				dev->stats.rx_over_errors++;
-+
-+		} else {
-+			/* alloc new buffer. */
-+			skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
-+			if (skb_new != NULL) {
-+
-+				skb = sp->rx_skb[idx];
-+				/* set skb */
-+				skb_put(skb,
-+						((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+				dev->stats.rx_bytes += skb->len;
-+				skb->protocol = eth_type_trans(skb, dev);
-+				/* pass the packet to upper layers */
-+				netif_rx(skb);
-+
-+				skb_new->dev = dev;
-+				/* 16 bit align */
-+				skb_reserve(skb_new, RX_OFFSET);
-+				/* reset descriptor's curr_addr */
-+				rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+				dev->stats.rx_packets++;
-+				sp->rx_skb[idx] = skb_new;
-+			} else {
-+				dev->stats.rx_dropped++;
-+			}
-+		}
-+
-+		rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+						 DMA_RX1_CHAINED);
-+		rxdesc->status = DMA_RX_OWN;
-+
-+		idx = DSC_NEXT(idx);
-+	}
-+
-+	sp->cur_rx = idx;
-+
-+	return rval;
-+}
-+
-+
-+static void ar231x_tx_int(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	u32 idx;
-+	struct sk_buff *skb;
-+	ar231x_descr_t *txdesc;
-+	unsigned int status = 0;
-+
-+	idx = sp->tx_csm;
-+
-+	while (idx != sp->tx_prd) {
-+		txdesc = &sp->tx_ring[idx];
-+
-+		if ((status = txdesc->status) & DMA_TX_OWN) {
-+			/* ar231x dma still owns descr */
-+			break;
-+		}
-+		/* done with this descriptor */
-+		dma_unmap_single(NULL, txdesc->addr,
-+						 txdesc->devcs & DMA_TX1_BSIZE_MASK,
-+						 DMA_TO_DEVICE);
-+		txdesc->status = 0;
-+
-+		if (status & DMA_TX_ERROR) {
-+			dev->stats.tx_errors++;
-+			dev->stats.tx_dropped++;
-+			if (status & DMA_TX_ERR_UNDER)
-+				dev->stats.tx_fifo_errors++;
-+			if (status & DMA_TX_ERR_HB)
-+				dev->stats.tx_heartbeat_errors++;
-+			if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
-+				dev->stats.tx_carrier_errors++;
-+			if (status & (DMA_TX_ERR_LATE |
-+						  DMA_TX_ERR_COL |
-+						  DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
-+				dev->stats.tx_aborted_errors++;
-+		} else {
-+			/* transmit OK */
-+			dev->stats.tx_packets++;
-+		}
-+
-+		skb = sp->tx_skb[idx];
-+		sp->tx_skb[idx] = NULL;
-+		idx = DSC_NEXT(idx);
-+		dev->stats.tx_bytes += skb->len;
-+		dev_kfree_skb_irq(skb);
-+	}
-+
-+	sp->tx_csm = idx;
-+
-+	return;
-+}
-+
-+
-+static void rx_tasklet_func(unsigned long data)
-+{
-+	struct net_device *dev = (struct net_device *) data;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	if (sp->unloading) {
-+		return;
-+	}
-+
-+	if (ar231x_rx_int(dev)) {
-+		tasklet_hi_schedule(&sp->rx_tasklet);
-+	} else {
-+		unsigned long flags;
-+		spin_lock_irqsave(&sp->lock, flags);
-+		sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+		spin_unlock_irqrestore(&sp->lock, flags);
-+	}
-+}
-+
-+static void rx_schedule(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+	tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *) dev_id;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int status, enabled;
-+
-+	/* clear interrupt */
-+	/*
-+	 * Don't clear RI bit if currently disabled.
-+	 */
-+	status = sp->dma_regs->status;
-+	enabled = sp->dma_regs->intr_ena;
-+	sp->dma_regs->status = status & enabled;
-+
-+	if (status & DMA_STATUS_NIS) {
-+		/* normal status */
-+		/*
-+		 * Don't schedule rx processing if interrupt
-+		 * is already disabled.
-+		 */
-+		if (status & enabled & DMA_STATUS_RI) {
-+			/* receive interrupt */
-+			rx_schedule(dev);
-+		}
-+		if (status & DMA_STATUS_TI) {
-+			/* transmit interrupt */
-+			ar231x_tx_int(dev);
-+		}
-+	}
-+
-+	/* abnormal status */
-+	if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+		ar231x_restart(dev);
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+
-+static int ar231x_open(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int ethsal, ethsah;
-+
-+	/* reset the hardware, in case the MAC address changed */
-+	ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+			  (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+	ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+			  (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+			  (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+			  (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+	sp->eth_regs->mac_addr[0] = ethsah;
-+	sp->eth_regs->mac_addr[1] = ethsal;
-+
-+	mdelay(10);
-+
-+	dev->mtu = 1500;
-+	netif_start_queue(dev);
-+
-+	sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+	return 0;
-+}
-+
-+static void ar231x_halt(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	int j;
-+
-+	tasklet_disable(&sp->rx_tasklet);
-+
-+	/* kill the MAC */
-+	sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE |	/* disable Receives */
-+								   MAC_CONTROL_TE);	/* disable Transmits */
-+	/* stop dma */
-+	sp->dma_regs->control = 0;
-+	sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+	/* place phy and MAC in reset */
-+	*sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
-+
-+	/* free buffers on tx ring */
-+	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+		struct sk_buff *skb;
-+		ar231x_descr_t *txdesc;
-+
-+		txdesc = &sp->tx_ring[j];
-+		txdesc->descr = 0;
-+
-+		skb = sp->tx_skb[j];
-+		if (skb) {
-+			dev_kfree_skb(skb);
-+			sp->tx_skb[j] = NULL;
-+		}
-+	}
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar231x_open () does not call request_irq (). Worse,
-+ * the call to ar231x_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar231x_close(struct net_device *dev)
-+{
-+#if 0
-+	/*
-+	 * Disable interrupts
-+	 */
-+	disable_irq(dev->irq);
-+
-+	/*
-+	 * Without (or before) releasing irq and stopping hardware, this
-+	 * is an absolute non-sense, by the way. It will be reset instantly
-+	 * by the first irq.
-+	 */
-+	netif_stop_queue(dev);
-+
-+	/* stop the MAC and DMA engines */
-+	ar231x_halt(dev);
-+
-+	/* release the interrupt */
-+	free_irq(dev->irq, dev);
-+
-+#endif
-+	return 0;
-+}
-+
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	ar231x_descr_t *td;
-+	u32 idx;
-+
-+	idx = sp->tx_prd;
-+	td = &sp->tx_ring[idx];
-+
-+	if (td->status & DMA_TX_OWN) {
-+		/* free skbuf and lie to the caller that we sent it out */
-+		dev->stats.tx_dropped++;
-+		dev_kfree_skb(skb);
-+
-+		/* restart transmitter in case locked */
-+		sp->dma_regs->xmt_poll = 0;
-+		return 0;
-+	}
-+
-+	/* Setup the transmit descriptor. */
-+	td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+				 (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
-+	td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+	td->status = DMA_TX_OWN;
-+
-+	/* kick transmitter last */
-+	sp->dma_regs->xmt_poll = 0;
-+
-+	sp->tx_skb[idx] = skb;
-+	idx = DSC_NEXT(idx);
-+	sp->tx_prd = idx;
-+
-+	return 0;
-+}
-+
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+	struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	int ret;
-+
-+	switch (cmd) {
-+
-+	case SIOCETHTOOL:
-+		spin_lock_irq(&sp->lock);
-+		ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
-+		spin_unlock_irq(&sp->lock);
-+		return ret;
-+
-+	case SIOCSIFHWADDR:
-+		if (copy_from_user
-+			(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+			return -EFAULT;
-+		return 0;
-+
-+	case SIOCGIFHWADDR:
-+		if (copy_to_user
-+			(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+			return -EFAULT;
-+		return 0;
-+
-+	case SIOCGMIIPHY:
-+	case SIOCGMIIREG:
-+	case SIOCSMIIREG:
-+		return phy_mii_ioctl(sp->phy_dev, data, cmd);
-+
-+	default:
-+		break;
-+	}
-+
-+	return -EOPNOTSUPP;
-+}
-+
-+static void ar231x_adjust_link(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int mc;
-+
-+	if (!sp->phy_dev->link)
-+		return;
-+
-+	if (sp->phy_dev->duplex != sp->oldduplex) {
-+		mc = readl(&sp->eth_regs->mac_control);
-+		mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
-+		if (sp->phy_dev->duplex)
-+			mc |= MAC_CONTROL_F;
-+		else
-+			mc |= MAC_CONTROL_DRO;
-+		writel(mc, &sp->eth_regs->mac_control);
-+		sp->oldduplex = sp->phy_dev->duplex;
-+	}
-+}
-+
-+#define MII_ADDR(phy, reg) \
-+	((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-+
-+static int
-+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-+{
-+	struct net_device *const dev = bus->priv;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+	ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
-+	while (ethernet->mii_addr & MII_ADDR_BUSY);
-+	return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static int
-+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-+             u16 value)
-+{
-+	struct net_device *const dev = bus->priv;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+	while (ethernet->mii_addr & MII_ADDR_BUSY);
-+	ethernet->mii_data = value << MII_DATA_SHIFT;
-+	ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
-+
-+	return 0;
-+}
-+
-+static int ar231x_mdiobus_reset(struct mii_bus *bus)
-+{
-+	struct net_device *const dev = bus->priv;
-+
-+	ar231x_reset_reg(dev);
-+
-+	return 0;
-+}
-+
-+static int ar231x_mdiobus_probe (struct net_device *dev)
-+{
-+	struct ar231x_private *const sp = netdev_priv(dev);
-+	struct phy_device *phydev = NULL;
-+	int phy_addr;
-+
-+	/* find the first (lowest address) PHY on the current MAC's MII bus */
-+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-+		if (sp->mii_bus->phy_map[phy_addr]) {
-+			phydev = sp->mii_bus->phy_map[phy_addr];
-+			sp->phy = phy_addr;
-+			break; /* break out with first one found */
-+		}
-+
-+	if (!phydev) {
-+		printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
-+		return -1;
-+	}
-+
-+	/* now we are supposed to have a proper phydev, to attach to... */
-+	BUG_ON(!phydev);
-+	BUG_ON(phydev->attached_dev);
-+
-+	phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
-+		PHY_INTERFACE_MODE_MII);
-+
-+	if (IS_ERR(phydev)) {
-+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+		return PTR_ERR(phydev);
-+	}
-+
-+	/* mask with MAC supported features */
-+	phydev->supported &= (SUPPORTED_10baseT_Half
-+		| SUPPORTED_10baseT_Full
-+		| SUPPORTED_100baseT_Half
-+		| SUPPORTED_100baseT_Full
-+		| SUPPORTED_Autoneg
-+		/* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-+		| SUPPORTED_MII
-+		| SUPPORTED_TP);
-+
-+	phydev->advertising = phydev->supported;
-+
-+	sp->oldduplex = -1;
-+	sp->phy_dev = phydev;
-+
-+	printk(KERN_INFO "%s: attached PHY driver [%s] "
-+		"(mii_bus:phy_addr=%s)\n",
-+		dev->name, phydev->drv->name, dev_name(&phydev->dev));
-+
-+	return 0;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ar231x.h
-@@ -0,0 +1,302 @@
-+/*
-+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <linux/autoconf.h>
-+#include <linux/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <ar231x_platform.h>
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER    (5*HZ)
-+
-+#define IS_DMA_TX_INT(X)   (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X)   (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN))    == 0)
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE	(AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx)	        ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+#define AR2313_MBGET		2
-+#define AR2313_MBSET		3
-+#define AR2313_PCI_RECONFIG	4
-+#define AR2313_PCI_DUMP		5
-+#define AR2313_TEST_PANIC	6
-+#define AR2313_TEST_NULLPTR	7
-+#define AR2313_READ_DATA	8
-+#define AR2313_WRITE_DATA	9
-+#define AR2313_GET_VERSION	10
-+#define AR2313_TEST_HANG	11
-+#define AR2313_SYNC		12
-+
-+#define DMA_RX_ERR_CRC		BIT(1)
-+#define DMA_RX_ERR_DRIB		BIT(2)
-+#define DMA_RX_ERR_MII		BIT(3)
-+#define DMA_RX_EV2		BIT(5)
-+#define DMA_RX_ERR_COL		BIT(6)
-+#define DMA_RX_LONG		BIT(7)
-+#define DMA_RX_LS		BIT(8)	/* last descriptor */
-+#define DMA_RX_FS		BIT(9)	/* first descriptor */
-+#define DMA_RX_MF		BIT(10)	/* multicast frame */
-+#define DMA_RX_ERR_RUNT		BIT(11)	/* runt frame */
-+#define DMA_RX_ERR_LENGTH	BIT(12)	/* length error */
-+#define DMA_RX_ERR_DESC		BIT(14)	/* descriptor error */
-+#define DMA_RX_ERROR		BIT(15)	/* error summary */
-+#define DMA_RX_LEN_MASK		0x3fff0000
-+#define DMA_RX_LEN_SHIFT	16
-+#define DMA_RX_FILT		BIT(30)
-+#define DMA_RX_OWN		BIT(31)	/* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK	0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT	0
-+#define DMA_RX1_CHAINED		BIT(24)
-+#define DMA_RX1_RER		BIT(25)
-+
-+#define DMA_TX_ERR_UNDER	BIT(1)	/* underflow error */
-+#define DMA_TX_ERR_DEFER	BIT(2)	/* excessive deferral */
-+#define DMA_TX_COL_MASK		0x78
-+#define DMA_TX_COL_SHIFT	3
-+#define DMA_TX_ERR_HB		BIT(7)	/* hearbeat failure */
-+#define DMA_TX_ERR_COL		BIT(8)	/* excessive collisions */
-+#define DMA_TX_ERR_LATE		BIT(9)	/* late collision */
-+#define DMA_TX_ERR_LINK		BIT(10)	/* no carrier */
-+#define DMA_TX_ERR_LOSS		BIT(11)	/* loss of carrier */
-+#define DMA_TX_ERR_JABBER	BIT(14)	/* transmit jabber timeout */
-+#define DMA_TX_ERROR		BIT(15)	/* frame aborted */
-+#define DMA_TX_OWN		BIT(31)	/* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK	0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT	0
-+#define DMA_TX1_CHAINED		BIT(24)	/* chained descriptors */
-+#define DMA_TX1_TER		BIT(25)	/* transmit end of ring */
-+#define DMA_TX1_FS		BIT(29)	/* first segment */
-+#define DMA_TX1_LS		BIT(30)	/* last segment */
-+#define DMA_TX1_IC		BIT(31)	/* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X)	(X  >> 16)	/* Received pkt Length */
-+
-+#define MAC_CONTROL_RE		BIT(2)	/* receive enable */
-+#define MAC_CONTROL_TE		BIT(3)	/* transmit enable */
-+#define MAC_CONTROL_DC		BIT(5)	/* Deferral check */
-+#define MAC_CONTROL_ASTP	BIT(8)	/* Auto pad strip */
-+#define MAC_CONTROL_DRTY	BIT(10)	/* Disable retry */
-+#define MAC_CONTROL_DBF		BIT(11)	/* Disable bcast frames */
-+#define MAC_CONTROL_LCC		BIT(12)	/* late collision ctrl */
-+#define MAC_CONTROL_HP		BIT(13)	/* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH	BIT(14)	/* Unicast hash filtering */
-+#define MAC_CONTROL_HO		BIT(15)	/* Hash only filtering */
-+#define MAC_CONTROL_PB		BIT(16)	/* Pass Bad frames */
-+#define MAC_CONTROL_IF		BIT(17)	/* Inverse filtering */
-+#define MAC_CONTROL_PR		BIT(18)	/* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM		BIT(19)	/* pass multicast */
-+#define MAC_CONTROL_F		BIT(20)	/* full-duplex */
-+#define MAC_CONTROL_DRO		BIT(23)	/* Disable Receive Own */
-+#define MAC_CONTROL_HBD		BIT(28)	/* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE		BIT(30)	/* big endian mode */
-+#define MAC_CONTROL_RA		BIT(31)	/* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY		BIT(0)
-+#define MII_ADDR_WRITE		BIT(1)
-+#define MII_ADDR_REG_SHIFT	6
-+#define MII_ADDR_PHY_SHIFT	11
-+#define MII_DATA_SHIFT		0
-+
-+#define FLOW_CONTROL_FCE	BIT(1)
-+
-+#define DMA_BUS_MODE_SWR	BIT(0)	/* software reset */
-+#define DMA_BUS_MODE_BLE	BIT(7)	/* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT	8	/* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO	BIT(20)	/* big-endian descriptors */
-+
-+#define DMA_STATUS_TI		BIT(0)	/* transmit interrupt */
-+#define DMA_STATUS_TPS		BIT(1)	/* transmit process stopped */
-+#define DMA_STATUS_TU		BIT(2)	/* transmit buffer unavailable */
-+#define DMA_STATUS_TJT		BIT(3)	/* transmit buffer timeout */
-+#define DMA_STATUS_UNF		BIT(5)	/* transmit underflow */
-+#define DMA_STATUS_RI		BIT(6)	/* receive interrupt */
-+#define DMA_STATUS_RU		BIT(7)	/* receive buffer unavailable */
-+#define DMA_STATUS_RPS		BIT(8)	/* receive process stopped */
-+#define DMA_STATUS_ETI		BIT(10)	/* early transmit interrupt */
-+#define DMA_STATUS_FBE		BIT(13)	/* fatal bus interrupt */
-+#define DMA_STATUS_ERI		BIT(14)	/* early receive interrupt */
-+#define DMA_STATUS_AIS		BIT(15)	/* abnormal interrupt summary */
-+#define DMA_STATUS_NIS		BIT(16)	/* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT	17	/* receive process state */
-+#define DMA_STATUS_TS_SHIFT	20	/* transmit process state */
-+#define DMA_STATUS_EB_SHIFT	23	/* error bits */
-+
-+#define DMA_CONTROL_SR		BIT(1)	/* start receive */
-+#define DMA_CONTROL_ST		BIT(13)	/* start transmit */
-+#define DMA_CONTROL_SF		BIT(21)	/* store and forward */
-+
-+
-+typedef struct {
-+	volatile unsigned int status;	// OWN, Device control and status.
-+	volatile unsigned int devcs;	// pkt Control bits + Length
-+	volatile unsigned int addr;	// Current Address.
-+	volatile unsigned int descr;	// Next descriptor in chain.
-+} ar231x_descr_t;
-+
-+
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+	volatile unsigned int mac_control;	/* 0x00 */
-+	volatile unsigned int mac_addr[2];	/* 0x04 - 0x08 */
-+	volatile unsigned int mcast_table[2];	/* 0x0c - 0x10 */
-+	volatile unsigned int mii_addr;	/* 0x14 */
-+	volatile unsigned int mii_data;	/* 0x18 */
-+	volatile unsigned int flow_control;	/* 0x1c */
-+	volatile unsigned int vlan_tag;	/* 0x20 */
-+	volatile unsigned int pad[7];	/* 0x24 - 0x3c */
-+	volatile unsigned int ucast_table[8];	/* 0x40-0x5c */
-+
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+	volatile unsigned int wdog_control;	/* 0x08 */
-+	volatile unsigned int wdog_timer;	/* 0x0c */
-+	volatile unsigned int misc_status;	/* 0x10 */
-+	volatile unsigned int misc_mask;	/* 0x14 */
-+	volatile unsigned int global_status;	/* 0x18 */
-+	volatile unsigned int reserved;	/* 0x1c */
-+	volatile unsigned int reset_control;	/* 0x20 */
-+} INTERRUPT;
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+typedef struct {
-+	volatile unsigned int bus_mode;	/* 0x00 (CSR0) */
-+	volatile unsigned int xmt_poll;	/* 0x04 (CSR1) */
-+	volatile unsigned int rcv_poll;	/* 0x08 (CSR2) */
-+	volatile unsigned int rcv_base;	/* 0x0c (CSR3) */
-+	volatile unsigned int xmt_base;	/* 0x10 (CSR4) */
-+	volatile unsigned int status;	/* 0x14 (CSR5) */
-+	volatile unsigned int control;	/* 0x18 (CSR6) */
-+	volatile unsigned int intr_ena;	/* 0x1c (CSR7) */
-+	volatile unsigned int rcv_missed;	/* 0x20 (CSR8) */
-+	volatile unsigned int reserved[11];	/* 0x24-0x4c (CSR9-19) */
-+	volatile unsigned int cur_tx_buf_addr;	/* 0x50 (CSR20) */
-+	volatile unsigned int cur_rx_buf_addr;	/* 0x50 (CSR21) */
-+} DMA;
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar231x_private {
-+	struct net_device *dev;
-+	int version;
-+	u32 mb[2];
-+
-+	volatile ETHERNET_STRUCT *phy_regs;
-+	volatile ETHERNET_STRUCT *eth_regs;
-+	volatile DMA *dma_regs;
-+	volatile u32 *int_regs;
-+	struct ar231x_eth *cfg;
-+
-+	spinlock_t lock;			/* Serialise access to device */
-+
-+	/*
-+	 * RX and TX descriptors, must be adjacent
-+	 */
-+	ar231x_descr_t *rx_ring;
-+	ar231x_descr_t *tx_ring;
-+
-+
-+	struct sk_buff **rx_skb;
-+	struct sk_buff **tx_skb;
-+
-+	/*
-+	 * RX elements
-+	 */
-+	u32 rx_skbprd;
-+	u32 cur_rx;
-+
-+	/*
-+	 * TX elements
-+	 */
-+	u32 tx_prd;
-+	u32 tx_csm;
-+
-+	/*
-+	 * Misc elements
-+	 */
-+	char name[48];
-+	struct {
-+		u32 address;
-+		u32 length;
-+		char *mapping;
-+	} desc;
-+
-+
-+	struct timer_list link_timer;
-+	unsigned short phy;			/* merlot phy = 1, samsung phy = 0x1f */
-+	unsigned short mac;
-+	unsigned short link;		/* 0 - link down, 1 - link up */
-+	u16 phyData;
-+
-+	struct tasklet_struct rx_tasklet;
-+	int unloading;
-+
-+	struct phy_device *phy_dev;
-+	struct mii_bus *mii_bus;
-+	int oldduplex;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int ar231x_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar231x_tx_timeout(struct net_device *dev);
-+#endif
-+static int ar231x_restart(struct net_device *dev);
-+static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
-+static int ar231x_open(struct net_device *dev);
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar231x_close(struct net_device *dev);
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
-+						int cmd);
-+static void ar231x_init_cleanup(struct net_device *dev);
-+static int ar231x_setup_timer(struct net_device *dev);
-+static void ar231x_link_timer_fn(unsigned long data);
-+static void ar231x_check_link(struct net_device *dev);
-+#endif							/* _AR2313_H_ */