summaryrefslogtreecommitdiffstats
path: root/target/linux/atheros/files/drivers
diff options
context:
space:
mode:
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2007-09-06 16:27:37 +0000
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2007-09-06 16:27:37 +0000
commit17c7b6c3fdc48301e50d22cc6138ede16bd1be24 (patch)
treea5d41b991a151e72663527a96fbc6c494565d65c /target/linux/atheros/files/drivers
parent5389989abaa52926b22f9f030d1481df1e73d745 (diff)
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/atheros/files/drivers')
-rw-r--r--target/linux/atheros/files/drivers/mtd/devices/spiflash.c533
-rw-r--r--target/linux/atheros/files/drivers/mtd/devices/spiflash.h120
-rw-r--r--target/linux/atheros/files/drivers/net/ar2313/Makefile5
-rw-r--r--target/linux/atheros/files/drivers/net/ar2313/ar2313.c1457
-rw-r--r--target/linux/atheros/files/drivers/net/ar2313/ar2313.h193
-rw-r--r--target/linux/atheros/files/drivers/net/ar2313/dma.h142
6 files changed, 2450 insertions, 0 deletions
diff --git a/target/linux/atheros/files/drivers/mtd/devices/spiflash.c b/target/linux/atheros/files/drivers/mtd/devices/spiflash.c
new file mode 100644
index 000000000..7bfc252ef
--- /dev/null
+++ b/target/linux/atheros/files/drivers/mtd/devices/spiflash.c
@@ -0,0 +1,533 @@
+
+/*
+ * MTD driver for the SPI Flash Memory support.
+ *
+ * Copyright (c) 2005-2006 Atheros Communications Inc.
+ * Copyright (C) 2006-2007 FON Technology, SL.
+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*===========================================================================
+** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT
+**
+** This module contains the Serial Flash access routines for the Atheros SOC.
+** The Atheros SOC integrates a SPI flash controller that is used to access
+** serial flash parts. The SPI flash controller executes in "Little Endian"
+** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
+** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
+** ONLY byteswapping when accessed via the SPI Flash Alias memory region
+** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
+** flash sectors is stored in "Little Endian" format.
+**
+** The spiflash_write() routine performs byteswapping on all write
+** operations.
+**===========================================================================*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/squashfs_fs.h>
+#include <linux/root_dev.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include "spiflash.h"
+
+#ifndef __BIG_ENDIAN
+#error This driver currently only works with big endian CPU.
+#endif
+
+#define MAX_PARTS 32
+
+#define SPIFLASH "spiflash: "
+
+#define MIN(a,b) ((a) < (b) ? (a) : (b))
+
+#define busy_wait(condition, wait) \
+ do { \
+ while (condition) { \
+ spin_unlock_bh(&spidata->mutex); \
+ if (wait > 1) \
+ msleep(wait); \
+ else if ((wait == 1) && need_resched()) \
+ schedule(); \
+ else \
+ udelay(1); \
+ spin_lock_bh(&spidata->mutex); \
+ } \
+ } while (0)
+
+
+static __u32 spiflash_regread32(int reg);
+static void spiflash_regwrite32(int reg, __u32 data);
+static __u32 spiflash_sendcmd (int op, u32 addr);
+
+int __init spiflash_init (void);
+void __exit spiflash_exit (void);
+static int spiflash_probe_chip (void);
+static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
+static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
+static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
+
+/* Flash configuration table */
+struct flashconfig {
+ __u32 byte_cnt;
+ __u32 sector_cnt;
+ __u32 sector_size;
+ __u32 cs_addrmask;
+} flashconfig_tbl[MAX_FLASH] =
+ {
+ { 0, 0, 0, 0},
+ { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
+ { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
+ { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0},
+ { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0},
+ { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE, 0x0}
+ };
+
+/* Mapping of generic opcodes to STM serial flash opcodes */
+#define SPI_WRITE_ENABLE 0
+#define SPI_WRITE_DISABLE 1
+#define SPI_RD_STATUS 2
+#define SPI_WR_STATUS 3
+#define SPI_RD_DATA 4
+#define SPI_FAST_RD_DATA 5
+#define SPI_PAGE_PROGRAM 6
+#define SPI_SECTOR_ERASE 7
+#define SPI_BULK_ERASE 8
+#define SPI_DEEP_PWRDOWN 9
+#define SPI_RD_SIG 10
+#define SPI_MAX_OPCODES 11
+
+struct opcodes {
+ __u16 code;
+ __s8 tx_cnt;
+ __s8 rx_cnt;
+} stm_opcodes[] = {
+ {STM_OP_WR_ENABLE, 1, 0},
+ {STM_OP_WR_DISABLE, 1, 0},
+ {STM_OP_RD_STATUS, 1, 1},
+ {STM_OP_WR_STATUS, 1, 0},
+ {STM_OP_RD_DATA, 4, 4},
+ {STM_OP_FAST_RD_DATA, 5, 0},
+ {STM_OP_PAGE_PGRM, 8, 0},
+ {STM_OP_SECTOR_ERASE, 4, 0},
+ {STM_OP_BULK_ERASE, 1, 0},
+ {STM_OP_DEEP_PWRDOWN, 1, 0},
+ {STM_OP_RD_SIG, 4, 1},
+};
+
+/* Driver private data structure */
+struct spiflash_data {
+ struct mtd_info *mtd;
+ struct mtd_partition *parsed_parts; /* parsed partitions */
+ void *readaddr; /* memory mapped data for read */
+ void *mmraddr; /* memory mapped register space */
+ wait_queue_head_t wq;
+ spinlock_t mutex;
+ int state;
+};
+enum {
+ FL_READY,
+ FL_READING,
+ FL_ERASING,
+ FL_WRITING
+};
+
+static struct spiflash_data *spidata;
+
+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
+
+/***************************************************************************************************/
+
+static __u32
+spiflash_regread32(int reg)
+{
+ volatile __u32 *data = (__u32 *)(spidata->mmraddr + reg);
+
+ return (*data);
+}
+
+static void
+spiflash_regwrite32(int reg, __u32 data)
+{
+ volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg);
+
+ *addr = data;
+ return;
+}
+
+
+static __u32
+spiflash_sendcmd (int op, u32 addr)
+{
+ u32 reg;
+ u32 mask;
+ struct opcodes *ptr_opcode;
+
+ ptr_opcode = &stm_opcodes[op];
+ busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
+ spiflash_regwrite32(SPI_FLASH_OPCODE, ((u32) ptr_opcode->code) | (addr << 8));
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
+ (ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
+
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+ busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0);
+
+ if (!ptr_opcode->rx_cnt)
+ return 0;
+
+ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
+
+ switch (ptr_opcode->rx_cnt) {
+ case 1:
+ mask = 0x000000ff;
+ break;
+ case 2:
+ mask = 0x0000ffff;
+ break;
+ case 3:
+ mask = 0x00ffffff;
+ break;
+ default:
+ mask = 0xffffffff;
+ break;
+ }
+ reg &= mask;
+
+ return reg;
+}
+
+
+
+/* Probe SPI flash device
+ * Function returns 0 for failure.
+ * and flashconfig_tbl array index for success.
+ */
+static int
+spiflash_probe_chip (void)
+{
+ __u32 sig;
+ int flash_size;
+
+ /* Read the signature on the flash device */
+ spin_lock_bh(&spidata->mutex);
+ sig = spiflash_sendcmd(SPI_RD_SIG, 0);
+ spin_unlock_bh(&spidata->mutex);
+
+ switch (sig) {
+ case STM_8MBIT_SIGNATURE:
+ flash_size = FLASH_1MB;
+ break;
+ case STM_16MBIT_SIGNATURE:
+ flash_size = FLASH_2MB;
+ break;
+ case STM_32MBIT_SIGNATURE:
+ flash_size = FLASH_4MB;
+ break;
+ case STM_64MBIT_SIGNATURE:
+ flash_size = FLASH_8MB;
+ break;
+ case STM_128MBIT_SIGNATURE:
+ flash_size = FLASH_16MB;
+ break;
+ default:
+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
+ return (0);
+ }
+
+ return (flash_size);
+}
+
+
+/* wait until the flash chip is ready and grab a lock */
+static int spiflash_wait_ready(int state)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+retry:
+ spin_lock_bh(&spidata->mutex);
+ if (spidata->state != FL_READY) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&spidata->wq, &wait);
+ spin_unlock_bh(&spidata->mutex);
+ schedule();
+ remove_wait_queue(&spidata->wq, &wait);
+
+ if(signal_pending(current))
+ return 0;
+
+ goto retry;
+ }
+ spidata->state = state;
+
+ return 1;
+}
+
+static inline void spiflash_done(void)
+{
+ spidata->state = FL_READY;
+ spin_unlock_bh(&spidata->mutex);
+ wake_up(&spidata->wq);
+}
+
+static int
+spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
+{
+ struct opcodes *ptr_opcode;
+ u32 temp, reg;
+
+ /* sanity checks */
+ if (instr->addr + instr->len > mtd->size) return (-EINVAL);
+
+ if (!spiflash_wait_ready(FL_ERASING))
+ return -EINTR;
+
+ spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
+ busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+
+ ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
+ temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
+ spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+ /* this will take some time */
+ spin_unlock_bh(&spidata->mutex);
+ msleep(800);
+ spin_lock_bh(&spidata->mutex);
+
+ busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20);
+ spiflash_done();
+
+ instr->state = MTD_ERASE_DONE;
+ if (instr->callback) instr->callback (instr);
+
+ return 0;
+}
+
+static int
+spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
+{
+ u8 *read_addr;
+
+ /* sanity checks */
+ if (!len) return (0);
+ if (from + len > mtd->size) return (-EINVAL);
+
+ /* we always read len bytes */
+ *retlen = len;
+
+ if (!spiflash_wait_ready(FL_READING))
+ return -EINTR;
+ read_addr = (u8 *)(spidata->readaddr + from);
+ memcpy(buf, read_addr, len);
+ spiflash_done();
+
+ return 0;
+}
+
+static int
+spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
+{
+ u32 opcode, bytes_left;
+
+ *retlen = 0;
+
+ /* sanity checks */
+ if (!len) return (0);
+ if (to + len > mtd->size) return (-EINVAL);
+
+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
+ bytes_left = len;
+
+ do {
+ u32 xact_len, reg, page_offset, spi_data = 0;
+
+ xact_len = MIN(bytes_left, sizeof(__u32));
+
+ /* 32-bit writes cannot span across a page boundary
+ * (256 bytes). This types of writes require two page
+ * program operations to handle it correctly. The STM part
+ * will write the overflow data to the beginning of the
+ * current page as opposed to the subsequent page.
+ */
+ page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
+
+ if (page_offset > STM_PAGE_SIZE) {
+ xact_len -= (page_offset - STM_PAGE_SIZE);
+ }
+
+ if (!spiflash_wait_ready(FL_WRITING))
+ return -EINTR;
+
+ spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
+ switch (xact_len) {
+ case 1:
+ spi_data = (u32) ((u8) *buf);
+ break;
+ case 2:
+ spi_data = (buf[1] << 8) | buf[0];
+ break;
+ case 3:
+ spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ break;
+ case 4:
+ spi_data = (buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
+ break;
+ default:
+ spi_data = 0;
+ break;
+ }
+
+ spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
+ opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
+ spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
+
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+ /* give the chip some time before we start busy waiting */
+ spin_unlock_bh(&spidata->mutex);
+ schedule();
+ spin_lock_bh(&spidata->mutex);
+
+ busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 0);
+ spiflash_done();
+
+ bytes_left -= xact_len;
+ to += xact_len;
+ buf += xact_len;
+
+ *retlen += xact_len;
+ } while (bytes_left != 0);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+
+static int spiflash_probe(struct platform_device *pdev)
+{
+ int result = -1;
+ int index, num_parts;
+ struct mtd_info *mtd;
+
+ spidata->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
+ spin_lock_init(&spidata->mutex);
+ init_waitqueue_head(&spidata->wq);
+ spidata->state = FL_READY;
+
+ if (!spidata->mmraddr) {
+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
+ kfree(spidata);
+ spidata = NULL;
+ }
+
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd) {
+ kfree(spidata);
+ return -ENXIO;
+ }
+
+ if (!(index = spiflash_probe_chip())) {
+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
+ goto error;
+ }
+
+ spidata->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
+ if (!spidata->readaddr) {
+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
+ goto error;
+ }
+
+ mtd->name = "spiflash";
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
+ mtd->size = flashconfig_tbl[index].byte_cnt;
+ mtd->erasesize = flashconfig_tbl[index].sector_size;
+ mtd->writesize = 1;
+ mtd->numeraseregions = 0;
+ mtd->eraseregions = NULL;
+ mtd->erase = spiflash_erase;
+ mtd->read = spiflash_read;
+ mtd->write = spiflash_write;
+ mtd->owner = THIS_MODULE;
+
+ /* parse redboot partitions */
+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0);
+ if (!num_parts)
+ goto error;
+
+ result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts);
+ spidata->mtd = mtd;
+
+ return (result);
+
+error:
+ kfree(mtd);
+ kfree(spidata);
+ return -ENXIO;
+}
+
+static int spiflash_remove (struct platform_device *pdev)
+{
+ del_mtd_partitions (spidata->mtd);
+ kfree(spidata->mtd);
+ return 0;
+}
+
+struct platform_driver spiflash_driver = {
+ .driver.name = "spiflash",
+ .probe = spiflash_probe,
+ .remove = spiflash_remove,
+};
+
+int __init
+spiflash_init (void)
+{
+ spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
+ if (!spidata)
+ return (-ENXIO);
+
+ spin_lock_init(&spidata->mutex);
+ platform_driver_register(&spiflash_driver);
+
+ return 0;
+}
+
+void __exit
+spiflash_exit (void)
+{
+ kfree(spidata);
+}
+
+module_init (spiflash_init);
+module_exit (spiflash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
+
diff --git a/target/linux/atheros/files/drivers/mtd/devices/spiflash.h b/target/linux/atheros/files/drivers/mtd/devices/spiflash.h
new file mode 100644
index 000000000..2553c6f50
--- /dev/null
+++ b/target/linux/atheros/files/drivers/mtd/devices/spiflash.h
@@ -0,0 +1,120 @@
+/*
+ * SPI Flash Memory support header file.
+ *
+ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
+ *
+ *
+ * Copyright (c) 2005, Atheros Communications Inc.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define FLASH_1MB 1
+#define FLASH_2MB 2
+#define FLASH_4MB 3
+#define FLASH_8MB 4
+#define FLASH_16MB 5
+#define MAX_FLASH 6
+
+#define STM_PAGE_SIZE 256
+
+#define SFI_WRITE_BUFFER_SIZE 4
+#define SFI_FLASH_ADDR_MASK 0x00ffffff
+
+#define STM_8MBIT_SIGNATURE 0x13
+#define STM_M25P80_BYTE_COUNT 1048576
+#define STM_M25P80_SECTOR_COUNT 16
+#define STM_M25P80_SECTOR_SIZE 0x10000
+
+#define STM_16MBIT_SIGNATURE 0x14
+#define STM_M25P16_BYTE_COUNT 2097152
+#define STM_M25P16_SECTOR_COUNT 32
+#define STM_M25P16_SECTOR_SIZE 0x10000
+
+#define STM_32MBIT_SIGNATURE 0x15
+#define STM_M25P32_BYTE_COUNT 4194304
+#define STM_M25P32_SECTOR_COUNT 64
+#define STM_M25P32_SECTOR_SIZE 0x10000
+
+#define STM_64MBIT_SIGNATURE 0x16
+#define STM_M25P64_BYTE_COUNT 8388608
+#define STM_M25P64_SECTOR_COUNT 128
+#define STM_M25P64_SECTOR_SIZE 0x10000
+
+#define STM_128MBIT_SIGNATURE 0x17
+#define STM_M25P128_BYTE_COUNT 16777216
+#define STM_M25P128_SECTOR_COUNT 256
+#define STM_M25P128_SECTOR_SIZE 0x10000
+
+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
+
+/*
+ * ST Microelectronics Opcodes for Serial Flash
+ */
+
+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
+#define STM_OP_RD_STATUS 0x05 /* Read Status */
+#define STM_OP_WR_STATUS 0x01 /* Write Status */
+#define STM_OP_RD_DATA 0x03 /* Read Data */
+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
+
+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
+
+/*
+ * SPI Flash Interface Registers
+ */
+#define AR531XPLUS_SPI_READ 0x08000000
+#define AR531XPLUS_SPI_MMR 0x11300000
+#define AR531XPLUS_SPI_MMR_SIZE 12
+
+#define AR531XPLUS_SPI_CTL 0x00
+#define AR531XPLUS_SPI_OPCODE 0x04
+#define AR531XPLUS_SPI_DATA 0x08
+
+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
+
+#define SPI_CTL_START 0x00000100
+#define SPI_CTL_BUSY 0x00010000
+#define SPI_CTL_TXCNT_MASK 0x0000000f
+#define SPI_CTL_RXCNT_MASK 0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
+#define SPI_CTL_SIZE_MASK 0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK 0x03000000
+#define SPI_OPCODE_MASK 0x000000ff
+
+#define SPI_STATUS_WIP STM_STATUS_WIP
diff --git a/target/linux/atheros/files/drivers/net/ar2313/Makefile b/target/linux/atheros/files/drivers/net/ar2313/Makefile
new file mode 100644
index 000000000..9eb63e46b
--- /dev/null
+++ b/target/linux/atheros/files/drivers/net/ar2313/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the AR2313 ethernet driver
+#
+
+obj-$(CONFIG_AR2313) += ar2313.o
diff --git a/target/linux/atheros/files/drivers/net/ar2313/ar2313.c b/target/linux/atheros/files/drivers/net/ar2313/ar2313.c
new file mode 100644
index 000000000..735ceebd9
--- /dev/null
+++ b/target/linux/atheros/files/drivers/net/ar2313/ar2313.c
@@ -0,0 +1,1457 @@
+/*
+ * ar2313.c: Linux driver for the Atheros AR231x Ethernet device.
+ *
+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Thanks to Atheros for providing hardware and documentation
+ * enabling me to write this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Additional credits:
+ * This code is taken from John Taylor's Sibyte driver and then
+ * modified for the AR2313.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/sockios.h>
+#include <linux/pkt_sched.h>
+#include <linux/compile.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+
+#include <net/sock.h>
+#include <net/ip.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/bootinfo.h>
+
+#define AR2313_MTU 1692
+#define AR2313_PRIOS 1
+#define AR2313_QUEUES (2*AR2313_PRIOS)
+#define AR2313_DESCR_ENTRIES 64
+
+#undef INDEX_DEBUG
+#define DEBUG 0
+#define DEBUG_TX 0
+#define DEBUG_RX 0
+#define DEBUG_INT 0
+#define DEBUG_MC 0
+#define DEBUG_ERR 1
+
+#ifndef min
+#define min(a,b) (((a)<(b))?(a):(b))
+#endif
+
+#ifndef SMP_CACHE_BYTES
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#endif
+
+#define AR2313_MBOX_SET_BIT 0x8
+
+#define BOARD_IDX_STATIC 0
+#define BOARD_IDX_OVERFLOW -1
+
+#include "dma.h"
+#include "ar2313.h"
+
+/*
+ * New interrupt handler strategy:
+ *
+ * An old interrupt handler worked using the traditional method of
+ * replacing an skbuff with a new one when a packet arrives. However
+ * the rx rings do not need to contain a static number of buffer
+ * descriptors, thus it makes sense to move the memory allocation out
+ * of the main interrupt handler and do it in a bottom half handler
+ * and only allocate new buffers when the number of buffers in the
+ * ring is below a certain threshold. In order to avoid starving the
+ * NIC under heavy load it is however necessary to force allocation
+ * when hitting a minimum threshold. The strategy for alloction is as
+ * follows:
+ *
+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
+ * the buffers in the interrupt handler
+ * RX_RING_THRES - maximum number of buffers in the rx ring
+ *
+ * One advantagous side effect of this allocation approach is that the
+ * entire rx processing can be done without holding any spin lock
+ * since the rx rings and registers are totally independent of the tx
+ * ring and its registers. This of course includes the kmalloc's of
+ * new skb's. Thus start_xmit can run in parallel with rx processing
+ * and the memory allocation on SMP systems.
+ *
+ * Note that running the skb reallocation in a bottom half opens up
+ * another can of races which needs to be handled properly. In
+ * particular it can happen that the interrupt handler tries to run
+ * the reallocation while the bottom half is either running on another
+ * CPU or was interrupted on the same CPU. To get around this the
+ * driver uses bitops to prevent the reallocation routines from being
+ * reentered.
+ *
+ * TX handling can also be done without holding any spin lock, wheee
+ * this is fun! since tx_csm is only written to by the interrupt
+ * handler.
+ */
+
+/*
+ * Threshold values for RX buffer allocation - the low water marks for
+ * when to start refilling the rings are set to 75% of the ring
+ * sizes. It seems to make sense to refill the rings entirely from the
+ * intrrupt handler once it gets below the panic threshold, that way
+ * we don't risk that the refilling is moved to another CPU when the
+ * one running the interrupt handler just got the slab code hot in its
+ * cache.
+ */
+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
+#define RX_PANIC_THRES (RX_RING_SIZE/4)
+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
+#define CRC_LEN 4
+#define RX_OFFSET 2
+
+#define AR2313_BUFSIZE (AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
+
+#ifdef MODULE
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
+MODULE_DESCRIPTION("AR2313 Ethernet driver");
+#endif
+
+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
+
+// prototypes
+static short armiiread(struct net_device *dev, short phy, short reg);
+static void armiiwrite(struct net_device *dev, short phy, short reg,
+ short data);
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+static void ar2313_halt(struct net_device *dev);
+static void rx_tasklet_func(unsigned long data);
+static void ar2313_multicast_list(struct net_device *dev);
+
+#ifndef ERR
+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+#endif
+
+
+int __init ar2313_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct ar2313_private *sp;
+ struct resource *res;
+ unsigned long ar_eth_base;
+ char buf[64];
+
+ dev = alloc_etherdev(sizeof(struct ar2313_private));
+
+ if (dev == NULL) {
+ printk(KERN_ERR
+ "ar2313: Unable to allocate net_device structure!\n");
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(dev);
+ platform_set_drvdata(pdev, dev);
+
+ sp = dev->priv;
+ sp->dev = dev;
+ sp->cfg = pdev->dev.platform_data;
+
+ sprintf(buf, "eth%d_membase", pdev->id);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
+ if (!res)
+ return -ENODEV;
+
+ sp->link = 0;
+ ar_eth_base = res->start;
+ sp->phy = sp->cfg->phy;
+
+ sprintf(buf, "eth%d_irq", pdev->id);
+ dev->irq = platform_get_irq_byname(pdev, buf);
+
+ spin_lock_init(&sp->lock);
+
+ /* initialize func pointers */
+ dev->open = &ar2313_open;
+ dev->stop = &ar2313_close;
+ dev->hard_start_xmit = &ar2313_start_xmit;
+
+ dev->get_stats = &ar2313_get_stats;
+ dev->set_multicast_list = &ar2313_multicast_list;
+#ifdef TX_TIMEOUT
+ dev->tx_timeout = ar2313_tx_timeout;
+ dev->watchdog_timeo = AR2313_TX_TIMEOUT;
+#endif
+ dev->do_ioctl = &ar2313_ioctl;
+
+ // SAMEER: do we need this?
+ dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
+
+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
+ tasklet_disable(&sp->rx_tasklet);
+
+ sp->eth_regs =
+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
+ if (!sp->eth_regs) {
+ printk("Can't remap eth registers\n");
+ return (-ENXIO);
+ }
+
+ /*
+ * When there's only one MAC, PHY regs are typically on ENET0,
+ * even though the MAC might be on ENET1.
+ * Needto remap PHY regs separately in this case
+ */
+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
+ sp->phy_regs = sp->eth_regs;
+ else {
+ sp->phy_regs =
+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
+ sizeof(*sp->phy_regs));
+ if (!sp->phy_regs) {
+ printk("Can't remap phy registers\n");
+ return (-ENXIO);
+ }
+ }
+
+ sp->dma_regs =
+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
+ sizeof(*sp->dma_regs));
+ dev->base_addr = (unsigned int) sp->dma_regs;
+ if (!sp->dma_regs) {
+ printk("Can't remap DMA registers\n");
+ return (-ENXIO);
+ }
+
+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
+ if (!sp->int_regs) {
+ printk("Can't remap INTERRUPT registers\n");
+ return (-ENXIO);
+ }
+
+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
+ sp->name[sizeof(sp->name) - 1] = '\0';
+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
+ sp->board_idx = BOARD_IDX_STATIC;
+
+ if (ar2313_init(dev)) {
+ /*
+ * ar2313_init() calls ar2313_init_cleanup() on error.
+ */
+ kfree(dev);
+ return -ENODEV;
+ }
+
+ if (register_netdev(dev)) {
+ printk("%s: register_netdev failed\n", __func__);
+ return -1;
+ }
+
+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
+ dev->name, sp->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
+
+ /* start link poll timer */
+ ar2313_setup_timer(dev);
+
+ return 0;
+}
+
+#if 0
+static void ar2313_dump_regs(struct net_device *dev)
+{
+ unsigned int *ptr, i;
+ struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
+
+ ptr = (unsigned int *) sp->eth_regs;
+ for (i = 0; i < (sizeof(ETHERNET_STRUCT) / sizeof(unsigned int));
+ i++, ptr++) {
+ printk("ENET: %08x = %08x\n", (int) ptr, *ptr);
+ }
+
+ ptr = (unsigned int *) sp->dma_regs;
+ for (i = 0; i < (sizeof(DMA) / sizeof(unsigned int)); i++, ptr++) {
+ printk("DMA: %08x = %08x\n", (int) ptr, *ptr);
+ }
+
+ ptr = (unsigned int *) sp->int_regs;
+ for (i = 0; i < (sizeof(INTERRUPT) / sizeof(unsigned int)); i++, ptr++) {
+ printk("INT: %08x = %08x\n", (int) ptr, *ptr);
+ }
+
+ for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
+ ar2313_descr_t *td = &sp->tx_ring[i];
+ printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
+ td->status, td->devcs, td->addr, td->descr);
+ }
+}
+#endif
+
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev)
+{
+ struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
+ unsigned long flags;
+
+#if DEBUG_TX
+ printk("Tx timeout\n");
+#endif
+ spin_lock_irqsave(&sp->lock, flags);
+ ar2313_restart(dev);
+ spin_unlock_irqrestore(&sp->lock, flags);
+}
+#endif
+
+#if DEBUG_MC
+static void printMcList(struct net_device *dev)
+{
+ struct dev_mc_list *list = dev->mc_list;
+ int num = 0, i;
+ while (list) {
+ printk("%d MC ADDR ", num);
+ for (i = 0; i < list->dmi_addrlen; i++) {
+ printk(":%02x", list->dmi_addr[i]);
+ }
+ list = list->next;
+ printk("\n");
+ }
+}
+#endif
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * THIS IS ABSOLUTE CRAP, disabled
+ */
+static void ar2313_multicast_list(struct net_device *dev)
+{
+ /*
+ * Always listen to broadcasts and
+ * treat IFF bits independently
+ */
+ struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
+ unsigned int recognise;
+
+ recognise = sp->eth_regs->mac_control;
+
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ recognise |= MAC_CONTROL_PR;
+ } else {
+ recognise &= ~MAC_CONTROL_PR;
+ }
+
+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
+#if DEBUG_MC
+ printMcList(dev);
+ printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__,
+ dev->mc_count);
+#endif
+ recognise |= MAC_CONTROL_PM; /* all multicast */
+ } else if (dev->mc_count > 0) {
+#if DEBUG_MC
+ printMcList(dev);
+ printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
+#endif
+ recognise |= MAC_CONTROL_PM; /* for the time being */
+ }
+#if DEBUG_MC
+ printk("%s: setting %08x to %08x\n", __FUNCTION__, (int) sp->eth_regs,
+ recognise);
+#endif
+
+ sp->eth_regs->mac_control = recognise;
+}
+
+static void rx_tasklet_cleanup(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ /*
+ * Tasklet may be scheduled. Need to get it removed from the list
+ * since we're about to free the struct.
+ */
+
+ sp->unloading = 1;
+ tasklet_enable(&sp->rx_tasklet);
+ tasklet_kill(&sp->rx_tasklet);
+}
+
+static int __exit ar2313_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ rx_tasklet_cleanup(dev);
+ ar2313_init_cleanup(dev);
+ unregister_netdev(dev);
+ kfree(dev);
+ return 0;
+}
+
+
+/*
+ * Restart the AR2313 ethernet controller.
+ */
+static int ar2313_restart(struct net_device *dev)
+{
+ /* disable interrupts */
+ disable_irq(dev->irq);
+
+ /* stop mac */
+ ar2313_halt(dev);
+
+ /* initialize */
+ ar2313_init(dev);
+
+ /* enable interrupts */
+ enable_irq(dev->irq);
+
+ return 0;
+}
+
+static struct platform_driver ar2313_driver = {
+ .driver.name = "ar531x-eth",
+ .probe = ar2313_probe,
+ .remove = ar2313_remove,
+};
+
+int __init ar2313_module_init(void)
+{
+ return platform_driver_register(&ar2313_driver);
+}
+
+void __exit ar2313_module_cleanup(void)
+{
+ platform_driver_unregister(&ar2313_driver);
+}
+
+module_init(ar2313_module_init);
+module_exit(ar2313_module_cleanup);
+
+
+static void ar2313_free_descriptors(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ if (sp->rx_ring != NULL) {
+ kfree((void *) KSEG0ADDR(sp->rx_ring));
+ sp->rx_ring = NULL;
+ sp->tx_ring = NULL;
+ }
+}
+
+
+static int ar2313_allocate_descriptors(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int size;
+ int j;
+ ar2313_descr_t *space;
+
+ if (sp->rx_ring != NULL) {
+ printk("%s: already done.\n", __FUNCTION__);
+ return 0;
+ }
+
+ size =
+ (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
+ space = kmalloc(size, GFP_KERNEL);
+ if (space == NULL)
+ return 1;
+
+ /* invalidate caches */
+ dma_cache_inv((unsigned int) space, size);
+
+ /* now convert pointer to KSEG1 */
+ space = (ar2313_descr_t *) KSEG1ADDR(space);
+
+ memset((void *) space, 0, size);
+
+ sp->rx_ring = space;
+ space += AR2313_DESCR_ENTRIES;
+
+ sp->tx_ring = space;
+ space += AR2313_DESCR_ENTRIES;
+
+ /* Initialize the transmit Descriptors */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ ar2313_descr_t *td = &sp->tx_ring[j];
+ td->status = 0;
+ td->devcs = DMA_TX1_CHAINED;
+ td->addr = 0;
+ td->descr =
+ virt_to_phys(&sp->
+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
+ }
+
+ return 0;
+}
+
+
+/*
+ * Generic cleanup handling data allocated during init. Used when the
+ * module is unloaded or if an error occurs during initialization
+ */
+static void ar2313_init_cleanup(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ struct sk_buff *skb;
+ int j;
+
+ ar2313_free_descriptors(dev);
+
+ if (sp->eth_regs)
+ iounmap((void *) sp->eth_regs);
+ if (sp->dma_regs)
+ iounmap((void *) sp->dma_regs);
+
+ if (sp->rx_skb) {
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ skb = sp->rx_skb[j];
+ if (skb) {
+ sp->rx_skb[j] = NULL;
+ dev_kfree_skb(skb);
+ }
+ }
+ kfree(sp->rx_skb);
+ sp->rx_skb = NULL;
+ }
+
+ if (sp->tx_skb) {
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ skb = sp->tx_skb[j];
+ if (skb) {
+ sp->tx_skb[j] = NULL;
+ dev_kfree_skb(skb);
+ }
+ }
+ kfree(sp->tx_skb);
+ sp->tx_skb = NULL;
+ }
+}
+
+static int ar2313_setup_timer(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ init_timer(&sp->link_timer);
+
+ sp->link_timer.function = ar2313_link_timer_fn;
+ sp->link_timer.data = (int) dev;
+ sp->link_timer.expires = jiffies + HZ;
+
+ add_timer(&sp->link_timer);
+ return 0;
+
+}
+
+static void ar2313_link_timer_fn(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ar2313_private *sp = dev->priv;
+
+ // see if the link status changed
+ // This was needed to make sure we set the PHY to the
+ // autonegotiated value of half or full duplex.
+ ar2313_check_link(dev);
+
+ // Loop faster when we don't have link.
+ // This was needed to speed up the AP bootstrap time.
+ if (sp->link == 0) {
+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
+ } else {
+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
+ }
+}
+
+static void ar2313_check_link(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ u16 phyData;
+
+ phyData = armiiread(dev, sp->phy, MII_BMSR);
+ if (sp->phyData != phyData) {
+ if (phyData & BMSR_LSTATUS) {
+ /* link is present, ready link partner ability to deterine
+ duplexity */
+ int duplex = 0;
+ u16 reg;
+
+ sp->link = 1;
+ reg = armiiread(dev, sp->phy, MII_BMCR);
+ if (reg & BMCR_ANENABLE) {
+ /* auto neg enabled */
+ reg = armiiread(dev, sp->phy, MII_LPA);
+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
+ } else {
+ /* no auto neg, just read duplex config */
+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
+ }
+
+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
+ dev->name, (duplex) ? "full" : "half");
+
+ if (duplex) {
+ /* full duplex */
+ sp->eth_regs->mac_control =
+ ((sp->eth_regs->
+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
+ } else {
+ /* half duplex */
+ sp->eth_regs->mac_control =
+ ((sp->eth_regs->
+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
+ }
+ } else {
+ /* no link */
+ sp->link = 0;
+ }
+ sp->phyData = phyData;
+ }
+}
+
+static int ar2313_reset_reg(struct net_device *dev)
+{
+ struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
+ unsigned int ethsal, ethsah;
+ unsigned int flags;
+
+ *sp->int_regs |= sp->cfg->reset_mac;
+ mdelay(10);
+ *sp->int_regs &= ~sp->cfg->reset_mac;
+ mdelay(10);
+ *sp->int_regs |= sp->cfg->reset_phy;
+ mdelay(10);
+ *sp->int_regs &= ~sp->cfg->reset_phy;
+ mdelay(10);
+
+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
+ mdelay(10);
+ sp->dma_regs->bus_mode =
+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
+
+ /* enable interrupts */
+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
+ DMA_STATUS_NIS |
+ DMA_STATUS_RI |
+ DMA_STATUS_TI | DMA_STATUS_FBE);
+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
+ sp->dma_regs->control =
+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
+
+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
+ sp->eth_regs->vlan_tag = (0x8100);
+
+ /* Enable Ethernet Interface */
+ flags = (MAC_CONTROL_TE | /* transmit enable */
+ MAC_CONTROL_PM | /* pass mcast */
+ MAC_CONTROL_F | /* full duplex */
+ MAC_CONTROL_HBD); /* heart beat disabled */
+
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ flags |= MAC_CONTROL_PR;
+ }
+ sp->eth_regs->mac_control = flags;
+
+ /* Set all Ethernet station address registers to their initial values */
+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
+
+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
+
+ sp->eth_regs->mac_addr[0] = ethsah;
+ sp->eth_regs->mac_addr[1] = ethsal;
+
+ mdelay(10);
+
+ return (0);
+}
+
+
+static int ar2313_init(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int ecode = 0;
+
+ /*
+ * Allocate descriptors
+ */
+ if (ar2313_allocate_descriptors(dev)) {
+ printk("%s: %s: ar2313_allocate_descriptors failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+
+ /*
+ * Get the memory for the skb rings.
+ */
+ if (sp->rx_skb == NULL) {
+ sp->rx_skb =
+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
+ GFP_KERNEL);
+ if (!(sp->rx_skb)) {
+ printk("%s: %s: rx_skb kmalloc failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+ }
+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+ if (sp->tx_skb == NULL) {
+ sp->tx_skb =
+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
+ GFP_KERNEL);
+ if (!(sp->tx_skb)) {
+ printk("%s: %s: tx_skb kmalloc failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+ }
+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+ /*
+ * Set tx_csm before we start receiving interrupts, otherwise
+ * the interrupt handler might think it is supposed to process
+ * tx ints before we are up and running, which may cause a null
+ * pointer access in the int handler.
+ */
+ sp->rx_skbprd = 0;
+ sp->cur_rx = 0;
+ sp->tx_prd = 0;
+ sp->tx_csm = 0;
+
+ /*
+ * Zero the stats before starting the interface
+ */
+ memset(&sp->stats, 0, sizeof(sp->stats));
+
+ /*
+ * We load the ring here as there seem to be no way to tell the
+ * firmware to wipe the ring without re-initializing it.
+ */
+ ar2313_load_rx_ring(dev, RX_RING_SIZE);
+
+ /*
+ * Init hardware
+ */
+ ar2313_reset_reg(dev);
+
+ /*
+ * Get the IRQ
+ */
+ ecode =
+ request_irq(dev->irq, &ar2313_interrupt,
+ IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+ dev->name, dev);
+ if (ecode) {
+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
+ dev->name, __FUNCTION__, dev->irq);
+ goto init_error;
+ }
+
+
+ tasklet_enable(&sp->rx_tasklet);
+
+ return 0;
+
+ init_error:
+ ar2313_init_cleanup(dev);
+ return ecode;
+}
+
+/*
+ * Load the rx ring.
+ *
+ * Loading rings is safe without holding the spin lock since this is
+ * done only before the device is enabled, thus no interrupts are
+ * generated and by the interrupt handler/tasklet handler.
+ */
+static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
+{
+
+ struct ar2313_private *sp = ((struct net_device *) dev)->priv;
+ short i, idx;
+
+ idx = sp->rx_skbprd;
+
+ for (i = 0; i < nr_bufs; i++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *rd;
+
+ if (sp->rx_skb[idx]) {
+#if DEBUG_RX
+ printk(KERN_INFO "ar2313 rx refill full\n");
+#endif /* DEBUG */
+ break;
+ }
+ // partha: create additional room for the second GRE fragment
+ skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC);
+ if (!skb) {
+ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
+ __FUNCTION__);
+ break;
+ }
+ // partha: create additional room in the front for tx pkt capture
+ skb_reserve(skb, 32);
+
+ /*
+ * Make sure IP header starts on a fresh cache line.
+ */
+ skb->dev = dev;
+ skb_reserve(skb, RX_OFFSET);
+ sp->rx_skb[idx] = skb;
+
+ rd = (ar2313_descr_t *) & sp->rx_ring[idx];
+
+ /* initialize dma descriptor */
+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+ rd->addr = virt_to_phys(skb->data);
+ rd->descr =
+ virt_to_phys(&sp->
+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
+ rd->status = DMA_RX_OWN;
+
+ idx = DSC_NEXT(idx);
+ }
+
+ if (!i) {
+#if DEBUG_ERR
+ printk(KERN_INFO
+ "Out of memory when allocating standard receive buffers\n");
+#endif /* DEBUG */
+ } else {
+ sp->rx_skbprd = idx;
+ }
+
+ return;
+}
+
+#define AR2313_MAX_PKTS_PER_CALL 64
+
+static int ar2313_rx_int(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ struct sk_buff *skb, *skb_new;
+ ar2313_descr_t *rxdesc;
+ unsigned int status;
+ u32 idx;
+ int pkts = 0;
+ int rval;
+
+ idx = sp->cur_rx;
+
+ /* process at most the entire ring and then wait for another interrupt
+ */
+ while (1) {
+
+ rxdesc = &sp->rx_ring[idx];
+ status = rxdesc->status;
+ if (status & DMA_RX_OWN) {
+ /* SiByte owns descriptor or descr not yet filled in */
+ rval = 0;
+ break;
+ }
+
+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
+ rval = 1;
+ break;
+ }
+#if DEBUG_RX
+ printk("index %d\n", idx);
+ printk("RX status %08x\n", rxdesc->status);
+ printk("RX devcs %08x\n", rxdesc->devcs);
+ printk("RX addr %08x\n", rxdesc->addr);
+ printk("RX descr %08x\n", rxdesc->descr);
+#endif
+
+ if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) &&
+ (!(status & DMA_RX_LONG))) {
+#if DEBUG_RX
+ printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
+#endif
+ sp->stats.rx_errors++;
+ sp->stats.rx_dropped++;
+
+ /* add statistics counters */
+ if (status & DMA_RX_ERR_CRC)
+ sp->stats.rx_crc_errors++;
+ if (status & DMA_RX_ERR_COL)
+ sp->stats.rx_over_errors++;
+ if (status & DMA_RX_ERR_LENGTH)
+ sp->stats.rx_length_errors++;
+ if (status & DMA_RX_ERR_RUNT)
+ sp->stats.rx_over_errors++;
+ if (status & DMA_RX_ERR_DESC)
+ sp->stats.rx_over_errors++;
+
+ } else {
+ /* alloc new buffer. */
+ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
+ if (skb_new != NULL) {
+
+ skb = sp->rx_skb[idx];
+ /* set skb */
+ skb_put(skb,
+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+
+ sp->stats.rx_bytes += skb->len;
+ skb->protocol = eth_type_trans(skb, dev);
+ /* pass the packet to upper layers */
+ netif_rx(skb);
+
+ skb_new->dev = dev;
+ /* 16 bit align */
+ skb_reserve(skb_new, RX_OFFSET + 32);
+ /* reset descriptor's curr_addr */
+ rxdesc->addr = virt_to_phys(skb_new->data);
+
+ sp->stats.rx_packets++;
+ sp->rx_skb[idx] = skb_new;
+ } else {
+ sp->stats.rx_dropped++;
+ }
+ }
+
+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+ rxdesc->status = DMA_RX_OWN;
+
+ idx = DSC_NEXT(idx);
+ }
+
+ sp->cur_rx = idx;
+
+ return rval;
+}
+
+
+static void ar2313_tx_int(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ u32 idx;
+ struct sk_buff *skb;
+ ar2313_descr_t *txdesc;
+ unsigned int status = 0;
+
+ idx = sp->tx_csm;
+
+ while (idx != sp->tx_prd) {
+
+ txdesc = &sp->tx_ring[idx];
+
+#if DEBUG_TX
+ printk
+ ("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
+ dev->name, sp->tx_csm, idx, sp->tx_prd, txdesc->status,
+ txdesc->devcs, txdesc->addr, txdesc->descr);
+#endif /* DEBUG */
+
+ if ((status = txdesc->status) & DMA_TX_OWN) {
+ /* ar2313 dma still owns descr */
+ break;
+ }
+ /* done with this descriptor */
+ dma_unmap_single(NULL, txdesc->addr,
+ txdesc->devcs & DMA_TX1_BSIZE_MASK,
+ DMA_TO_DEVICE);
+ txdesc->status = 0;
+
+ if (status & DMA_TX_ERROR) {
+ sp->stats.tx_errors++;
+ sp->stats.tx_dropped++;
+ if (status & DMA_TX_ERR_UNDER)
+ sp->stats.tx_fifo_errors++;
+ if (status & DMA_TX_ERR_HB)
+ sp->stats.tx_heartbeat_errors++;
+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
+ sp->stats.tx_carrier_errors++;
+ if (status & (DMA_TX_ERR_LATE |
+ DMA_TX_ERR_COL |
+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
+ sp->stats.tx_aborted_errors++;
+ } else {
+ /* transmit OK */
+ sp->stats.tx_packets++;
+ }
+
+ skb = sp->tx_skb[idx];
+ sp->tx_skb[idx] = NULL;
+ idx = DSC_NEXT(idx);
+ sp->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ }
+
+ sp->tx_csm = idx;
+
+ return;
+}
+
+
+static void rx_tasklet_func(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ar2313_private *sp = dev->priv;
+
+ if (sp->unloading) {
+ return;
+ }
+
+ if (ar2313_rx_int(dev)) {
+ tasklet_hi_schedule(&sp->rx_tasklet);
+ } else {
+ unsigned long flags;
+ spin_lock_irqsave(&sp->lock, flags);
+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+}
+
+static void rx_schedule(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
+
+ tasklet_hi_schedule(&sp->rx_tasklet);
+}
+
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct ar2313_private *sp = dev->priv;
+ unsigned int status, enabled;
+
+ /* clear interrupt */
+ /*
+ * Don't clear RI bit if currently disabled.
+ */
+ status = sp->dma_regs->status;
+ enabled = sp->dma_regs->intr_ena;
+ sp->dma_regs->status = status & enabled;
+
+ if (status & DMA_STATUS_NIS) {
+ /* normal status */
+ /*
+ * Don't schedule rx processing if interrupt
+ * is already disabled.
+ */
+ if (status & enabled & DMA_STATUS_RI) {
+ /* receive interrupt */
+ rx_schedule(dev);
+ }
+ if (status & DMA_STATUS_TI) {
+ /* transmit interrupt */
+ ar2313_tx_int(dev);
+ }
+ }
+
+ if (status & DMA_STATUS_AIS) {
+#if DEBUG_INT
+ printk("%s: AIS set %08x & %x\n", __FUNCTION__,
+ status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
+#endif
+ /* abnormal status */
+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
+ ar2313_restart(dev);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+
+static int ar2313_open(struct net_device *dev)
+{
+ struct ar2313_private *sp;
+
+ sp = dev->priv;
+
+ dev->mtu = 1500;
+ netif_start_queue(dev);
+
+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
+
+ return 0;
+}
+
+static void ar2313_halt(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int j;
+
+ tasklet_disable(&sp->rx_tasklet);
+
+ /* kill the MAC */
+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
+ MAC_CONTROL_TE); /* disable Transmits */
+ /* stop dma */
+ sp->dma_regs->control = 0;
+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
+
+ /* place phy and MAC in reset */
+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
+
+ /* free buffers on tx ring */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *txdesc;
+
+ txdesc = &sp->tx_ring[j];
+ txdesc->descr = 0;
+
+ skb = sp->tx_skb[j];
+ if (skb) {
+ dev_kfree_skb(skb);
+ sp->tx_skb[j] = NULL;
+ }
+ }
+}
+
+/*
+ * close should do nothing. Here's why. It's called when
+ * 'ifconfig bond0 down' is run. If it calls free_irq then
+ * the irq is gone forever ! When bond0 is made 'up' again,
+ * the ar2313_open () does not call request_irq (). Worse,
+ * the call to ar2313_halt() generates a WDOG reset due to
+ * the write to 'sp->int_regs' and the box reboots.
+ * Commenting this out is good since it allows the
+ * system to resume when bond0 is made up again.
+ */
+static int ar2313_close(struct net_device *dev)
+{
+#if 0
+ /*
+ * Disable interrupts
+ */
+ disable_irq(dev->irq);
+
+ /*
+ * Without (or before) releasing irq and stopping hardware, this
+ * is an absolute non-sense, by the way. It will be reset instantly
+ * by the first irq.
+ */
+ netif_stop_queue(dev);
+
+ /* stop the MAC and DMA engines */
+ ar2313_halt(dev);
+
+ /* release the interrupt */
+ free_irq(dev->irq, dev);
+
+#endif
+ return 0;
+}
+
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ ar2313_descr_t *td;
+ u32 idx;
+
+ idx = sp->tx_prd;
+ td = &sp->tx_ring[idx];
+
+ if (td->status & DMA_TX_OWN) {
+#if DEBUG_TX
+ printk("%s: No space left to Tx\n", __FUNCTION__);
+#endif
+ /* free skbuf and lie to the caller that we sent it out */
+ sp->stats.tx_dropped++;
+ dev_kfree_skb(skb);
+
+ /* restart transmitter in case locked */
+ sp->dma_regs->xmt_poll = 0;
+ return 0;
+ }
+
+ /* Setup the transmit descriptor. */
+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
+ td->status = DMA_TX_OWN;
+
+ /* kick transmitter last */
+ sp->dma_regs->xmt_poll = 0;
+
+#if DEBUG_TX
+ printk("index %d\n", idx);
+ printk("TX status %08x\n", td->status);
+ printk("TX devcs %08x\n", td->devcs);
+ printk("TX addr %08x\n", td->addr);
+ printk("TX descr %08x\n", td->descr);
+#endif
+
+ sp->tx_skb[idx] = skb;
+ idx = DSC_NEXT(idx);
+ sp->tx_prd = idx;
+
+ return 0;
+}
+
+static int netdev_get_ecmd(struct net_device *dev,
+ struct ethtool_cmd *ecmd)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 tmp;
+
+ ecmd->supported =
+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
+
+ ecmd->port = PORT_TP;
+ /* only supports internal transceiver */
+ ecmd->transceiver = XCVR_INTERNAL;
+ /* not sure what this is for */
+ ecmd->phy_address = 1;
+
+ ecmd->advertising = ADVERTISED_MII;
+ tmp = armiiread(dev, np->phy, MII_ADVERTISE);
+ if (tmp & ADVERTISE_10HALF)
+ ecmd->advertising |= ADVERTISED_10baseT_Half;
+ if (tmp & ADVERTISE_10FULL)
+ ecmd->advertising |= ADVERTISED_10baseT_Full;
+ if (tmp & ADVERTISE_100HALF)
+ ecmd->advertising |= ADVERTISED_100baseT_Half;
+ if (tmp & ADVERTISE_100FULL)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+
+ tmp = armiiread(dev, np->phy, MII_BMCR);
+ if (tmp & BMCR_ANENABLE) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->autoneg = AUTONEG_ENABLE;
+ } else {
+ ecmd->autoneg = AUTONEG_DISABLE;
+ }
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ tmp = armiiread(dev, np->phy, MII_LPA);
+ if (tmp & (LPA_100FULL | LPA_10FULL)) {
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ecmd->duplex = DUPLEX_HALF;
+ }
+ if (tmp & (LPA_100FULL | LPA_100HALF)) {
+ ecmd->speed = SPEED_100;
+ } else {
+ ecmd->speed = SPEED_10;
+ }
+ } else {
+ if (tmp & BMCR_FULLDPLX) {
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ecmd->duplex = DUPLEX_HALF;
+ }
+ if (tmp & BMCR_SPEED100) {
+ ecmd->speed = SPEED_100;
+ } else {
+ ecmd->speed = SPEED_10;
+ }
+ }
+
+ /* ignore maxtxpkt, maxrxpkt for now */
+
+ return 0;
+}
+
+static int netdev_set_ecmd(struct net_device *dev,
+ struct ethtool_cmd *ecmd)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 tmp;
+
+ if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+ return -EINVAL;
+ if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+ return -EINVAL;
+ if (ecmd->port != PORT_TP)
+ return -EINVAL;
+ if (ecmd->transceiver != XCVR_INTERNAL)
+ return -EINVAL;
+ if (ecmd->autoneg != AUTONEG_DISABLE
+ && ecmd->autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+ /* ignore phy_address, maxtxpkt, maxrxpkt for now */
+
+ /* WHEW! now lets bang some bits */
+
+ tmp = armiiread(dev, np->phy, MII_BMCR);
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ /* turn on autonegotiation */
+ tmp |= BMCR_ANENABLE;
+ printk("%s: Enabling auto-neg\n", dev->name);
+ } else {
+ /* turn off auto negotiation, set speed and duplexity */
+ tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
+ if (ecmd->speed == SPEED_100)
+ tmp |= BMCR_SPEED100;
+ if (ecmd->duplex == DUPLEX_FULL)
+ tmp |= BMCR_FULLDPLX;
+ printk("%s: Hard coding %d/%s\n", dev->name,
+ (ecmd->speed == SPEED_100) ? 100 : 10,
+ (ecmd->duplex == DUPLEX_FULL) ? "full" : "half");
+ }
+ armiiwrite(dev, np->phy, MII_BMCR, tmp);
+ np->phyData = 0;
+ return 0;
+}
+
+static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 cmd;
+
+ if (get_user(cmd, (u32 *) useraddr))
+ return -EFAULT;
+
+ switch (cmd) {
+ /* get settings */
+ case ETHTOOL_GSET:{
+ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+ spin_lock_irq(&np->lock);
+ netdev_get_ecmd(dev, &ecmd);
+ spin_unlock_irq(&np->lock);
+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
+ return -EFAULT;
+ return 0;
+ }
+ /* set settings */
+ case ETHTOOL_SSET:{
+ struct ethtool_cmd ecmd;
+ int r;
+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
+ return -EFAULT;
+ spin_lock_irq(&np->lock);
+ r = netdev_set_ecmd(dev, &ecmd);
+ spin_unlock_irq(&np->lock);
+ return r;
+ }
+ /* restart autonegotiation */
+ case ETHTOOL_NWAY_RST:{
+ int tmp;
+ int r = -EINVAL;
+ /* if autoneg is off, it's an error */
+ tmp = armiiread(dev, np->phy, MII_BMCR);
+ if (tmp & BMCR_ANENABLE) {
+ tmp |= (BMCR_ANRESTART);
+ armiiwrite(dev, np->phy, MII_BMCR, tmp);
+ r = 0;
+ }
+ return r;
+ }
+ /* get link status */
+ case ETHTOOL_GLINK:{
+ struct ethtool_value edata = { ETHTOOL_GLINK };
+ edata.data =
+ (armiiread(dev, np->phy, MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+ }
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
+
+ switch (cmd) {
+
+ case SIOCETHTOOL:
+ return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
+
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ data->phy_id = 1;
+ /* Fall Through */
+
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ data->val_out = armiiread(dev, data->phy_id & 0x1f,
+ data->reg_num & 0x1f);
+ return 0;
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ armiiwrite(dev, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, data->val_in);
+ return 0;
+
+ case SIOCSIFHWADDR:
+ if (copy_from_user
+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGIFHWADDR:
+ if (copy_to_user
+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ return &sp->stats;
+}
+
+
+#define MII_ADDR(phy, reg) \
+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
+
+static short armiiread(struct net_device *dev, short phy, short reg)
+{
+ struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
+
+ ethernet->mii_addr = MII_ADDR(phy, reg);
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
+ return (ethernet->mii_data >> MII_DATA_SHIFT);
+}
+
+static void
+armiiwrite(struct net_device *dev, short phy, short reg, short data)
+{
+ struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
+
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
+ ethernet->mii_data = data << MII_DATA_SHIFT;
+ ethernet->mii_addr = MII_ADDR(phy, reg) | MII_ADDR_WRITE;
+}
diff --git a/target/linux/atheros/files/drivers/net/ar2313/ar2313.h b/target/linux/atheros/files/drivers/net/ar2313/ar2313.h
new file mode 100644
index 000000000..c0b3a4f76
--- /dev/null
+++ b/target/linux/atheros/files/drivers/net/ar2313/ar2313.h
@@ -0,0 +1,193 @@
+#ifndef _AR2313_H_
+#define _AR2313_H_
+
+#include <linux/autoconf.h>
+#include <asm/bootinfo.h>
+#include <ar531x_platform.h>
+
+/*
+ * probe link timer - 5 secs
+ */
+#define LINK_TIMER (5*HZ)
+
+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
+
+#define AR2313_TX_TIMEOUT (HZ/4)
+
+/*
+ * Rings
+ */
+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
+
+static inline int tx_space(u32 csm, u32 prd)
+{
+ return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
+}
+
+#if MAX_SKB_FRAGS
+#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
+#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
+#else
+#define tx_ring_full 0
+#endif
+
+#define AR2313_MBGET 2
+#define AR2313_MBSET 3
+#define AR2313_PCI_RECONFIG 4
+#define AR2313_PCI_DUMP 5
+#define AR2313_TEST_PANIC 6
+#define AR2313_TEST_NULLPTR 7
+#define AR2313_READ_DATA 8
+#define AR2313_WRITE_DATA 9
+#define AR2313_GET_VERSION 10
+#define AR2313_TEST_HANG 11
+#define AR2313_SYNC 12
+
+
+//
+// New Combo structure for Both Eth0 AND eth1
+//
+typedef struct {
+ volatile unsigned int mac_control; /* 0x00 */
+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
+ volatile unsigned int mii_addr; /* 0x14 */
+ volatile unsigned int mii_data; /* 0x18 */
+ volatile unsigned int flow_control; /* 0x1c */
+ volatile unsigned int vlan_tag; /* 0x20 */
+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
+
+} ETHERNET_STRUCT;
+
+/********************************************************************
+ * Interrupt controller
+ ********************************************************************/
+
+typedef struct {
+ volatile unsigned int wdog_control; /* 0x08 */
+ volatile unsigned int wdog_timer; /* 0x0c */
+ volatile unsigned int misc_status; /* 0x10 */
+ volatile unsigned int misc_mask; /* 0x14 */
+ volatile unsigned int global_status; /* 0x18 */
+ volatile unsigned int reserved; /* 0x1c */
+ volatile unsigned int reset_control; /* 0x20 */
+} INTERRUPT;
+
+/********************************************************************
+ * DMA controller
+ ********************************************************************/
+typedef struct {
+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
+ volatile unsigned int status; /* 0x14 (CSR5) */
+ volatile unsigned int control; /* 0x18 (CSR6) */
+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
+} DMA;
+
+/*
+ * Struct private for the Sibyte.
+ *
+ * Elements are grouped so variables used by the tx handling goes
+ * together, and will go into the same cache lines etc. in order to
+ * avoid cache line contention between the rx and tx handling on SMP.
+ *
+ * Frequently accessed variables are put at the beginning of the
+ * struct to help the compiler generate better/shorter code.
+ */
+struct ar2313_private {
+ struct net_device *dev;
+ int version;
+ u32 mb[2];
+
+ volatile ETHERNET_STRUCT *phy_regs;
+ volatile ETHERNET_STRUCT *eth_regs;
+ volatile DMA *dma_regs;
+ volatile u32 *int_regs;
+ struct ar531x_eth *cfg;
+
+ spinlock_t lock; /* Serialise access to device */
+
+ /*
+ * RX and TX descriptors, must be adjacent
+ */
+ ar2313_descr_t *rx_ring;
+ ar2313_descr_t *tx_ring;
+
+
+ struct sk_buff **rx_skb;
+ struct sk_buff **tx_skb;
+
+ /*
+ * RX elements
+ */
+ u32 rx_skbprd;
+ u32 cur_rx;
+
+ /*
+ * TX elements
+ */
+ u32 tx_prd;
+ u32 tx_csm;
+
+ /*
+ * Misc elements
+ */
+ int board_idx;
+ char name[48];
+ struct net_device_stats stats;
+ struct {
+ u32 address;
+ u32 length;
+ char *mapping;
+ } desc;
+
+
+ struct timer_list link_timer;
+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
+ unsigned short mac;
+ unsigned short link; /* 0 - link down, 1 - link up */
+ u16 phyData;
+
+ struct tasklet_struct rx_tasklet;
+ int unloading;
+};
+
+
+/*
+ * Prototypes
+ */
+static int ar2313_init(struct net_device *dev);
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+#if 0
+static void ar2313_multicast_list(struct net_device *dev);
+#endif
+static int ar2313_restart(struct net_device *dev);
+#if DEBUG
+static void ar2313_dump_regs(struct net_device *dev);
+#endif
+static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
+static int ar2313_open(struct net_device *dev);
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int ar2313_close(struct net_device *dev);
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr,
+ int cmd);
+static void ar2313_init_cleanup(struct net_device *dev);
+static int ar2313_setup_timer(struct net_device *dev);
+static void ar2313_link_timer_fn(unsigned long data);
+static void ar2313_check_link(struct net_device *dev);
+static struct net_device_stats *ar2313_get_stats(struct net_device *dev);
+#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros/files/drivers/net/ar2313/dma.h b/target/linux/atheros/files/drivers/net/ar2313/dma.h
new file mode 100644
index 000000000..113827047
--- /dev/null
+++ b/target/linux/atheros/files/drivers/net/ar2313/dma.h
@@ -0,0 +1,142 @@
+#ifndef __ARUBA_DMA_H__
+#define __ARUBA_DMA_H__
+
+/*******************************************************************************
+ *
+ * Copyright 2002 Integrated Device Technology, Inc.
+ * All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date : 20011005
+ * Update :
+ * $Log: dma.h,v $
+ * Revision 1.3 2002/06/06 18:34:03 astichte
+ * Added XXX_PhysicalAddress and XXX_VirtualAddress
+ *
+ * Revision 1.2 2002/06/05 18:30:46 astichte
+ * Removed IDTField
+ *
+ * Revision 1.1 2002/05/29 17:33:21 sysarch
+ * jba File moved from vcode/include/idt/acacia
+ *
+ *
+ ******************************************************************************/
+
+#define AR_BIT(x) (1 << (x))
+#define DMA_RX_ERR_CRC AR_BIT(1)
+#define DMA_RX_ERR_DRIB AR_BIT(2)
+#define DMA_RX_ERR_MII AR_BIT(3)
+#define DMA_RX_EV2 AR_BIT(5)
+#define DMA_RX_ERR_COL AR_BIT(6)
+#define DMA_RX_LONG AR_BIT(7)
+#define DMA_RX_LS AR_BIT(8) /* last descriptor */
+#define DMA_RX_FS AR_BIT(9) /* first descriptor */
+#define DMA_RX_MF AR_BIT(10) /* multicast frame */
+#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
+#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
+#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
+#define DMA_RX_ERROR AR_BIT(15) /* error summary */
+#define DMA_RX_LEN_MASK 0x3fff0000
+#define DMA_RX_LEN_SHIFT 16
+#define DMA_RX_FILT AR_BIT(30)
+#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
+
+#define DMA_RX1_BSIZE_MASK 0x000007ff
+#define DMA_RX1_BSIZE_SHIFT 0
+#define DMA_RX1_CHAINED AR_BIT(24)
+#define DMA_RX1_RER AR_BIT(25)
+
+#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
+#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
+#define DMA_TX_COL_MASK 0x78
+#define DMA_TX_COL_SHIFT 3
+#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
+#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
+#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
+#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
+#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
+#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
+#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
+#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
+
+#define DMA_TX1_BSIZE_MASK 0x000007ff
+#define DMA_TX1_BSIZE_SHIFT 0
+#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
+#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
+#define DMA_TX1_FS AR_BIT(29) /* first segment */
+#define DMA_TX1_LS AR_BIT(30) /* last segment */
+#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
+
+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
+
+#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
+#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
+#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check */
+#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
+#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
+#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
+#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
+#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
+#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
+#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
+#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
+#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
+#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames
+ only) */
+#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
+#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
+#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
+#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE
+ SET) */
+#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
+#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid
+ frames) */
+
+#define MII_ADDR_BUSY AR_BIT(0)
+#define MII_ADDR_WRITE AR_BIT(1)
+#define MII_ADDR_REG_SHIFT 6
+#define MII_ADDR_PHY_SHIFT 11
+#define MII_DATA_SHIFT 0
+
+#define FLOW_CONTROL_FCE AR_BIT(1)
+
+#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
+#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
+#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
+
+#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
+#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
+#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
+#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
+#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
+#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
+#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
+#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
+#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
+#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
+#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
+#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
+#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
+
+#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
+#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
+#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
+
+
+typedef struct {
+ volatile unsigned int status; // OWN, Device control and status.
+ volatile unsigned int devcs; // pkt Control bits + Length
+ volatile unsigned int addr; // Current Address.
+ volatile unsigned int descr; // Next descriptor in chain.
+} ar2313_descr_t;
+
+
+#endif // __ARUBA_DMA_H__