[at91] Update to 2.6.38

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26246 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 9 insertions, 76 deletions

diff --git a/target/linux/at91/patches/200-experimenta_adc_driver.patch b/target/linux/at91/patches/200-experimenta_adc_driver.patch
index fc32017ec..625b37797 100644
--- a/target/linux/at91/patches/200-experimenta_adc_driver.patch
+++ b/target/linux/at91/patches/200-experimenta_adc_driver.patch
@@ -1,8 +1,8 @@
-Index: linux-2.6.35.9/drivers/misc/Kconfig
+Index: linux-2.6.38/drivers/misc/Kconfig
 ===================================================================
---- linux-2.6.35.9.orig/drivers/misc/Kconfig	2010-12-20 19:06:11.185139238 +0100
-+++ linux-2.6.35.9/drivers/misc/Kconfig	2010-12-20 19:07:31.000000000 +0100
-@@ -95,6 +95,10 @@
+--- linux-2.6.38.orig/drivers/misc/Kconfig	2011-03-15 02:20:32.000000000 +0100
++++ linux-2.6.38/drivers/misc/Kconfig	2011-03-20 22:54:33.114794033 +0100
+@@ -104,6 +104,10 @@
  	  TC can be used for other purposes, such as PWM generation and
  	  interval timing.
  
@@ -13,15 +13,16 @@ Index: linux-2.6.35.9/drivers/misc/Kconfig
  config IBM_ASM
  	tristate "Device driver for IBM RSA service processor"
  	depends on X86 && PCI && INPUT && EXPERIMENTAL
-Index: linux-2.6.35.9/drivers/misc/Makefile
+Index: linux-2.6.38/drivers/misc/Makefile
 ===================================================================
---- linux-2.6.35.9.orig/drivers/misc/Makefile	2010-12-20 19:04:59.494200153 +0100
-+++ linux-2.6.35.9/drivers/misc/Makefile	2010-12-20 19:06:04.000000000 +0100
+--- linux-2.6.38.orig/drivers/misc/Makefile	2011-03-15 02:20:32.000000000 +0100
++++ linux-2.6.38/drivers/misc/Makefile	2011-03-20 22:55:18.000000000 +0100
 @@ -9,6 +9,7 @@
  obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
  obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
  obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
 +obj-$(CONFIG_AT91_ADC)		+= at91-adc.o
+ obj-$(CONFIG_BMP085)		+= bmp085.o
  obj-$(CONFIG_ICS932S401)	+= ics932s401.o
  obj-$(CONFIG_LKDTM)		+= lkdtm.o
- obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
+
diff --git a/target/linux/at91/patches/800-netus-support.patch b/target/linux/at91/patches/800-netus-support.patch
deleted file mode 100755
index ad3301762..000000000
--- a/target/linux/at91/patches/800-netus-support.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/arm/mach-at91/Kconfig
-+++ b/arch/arm/mach-at91/Kconfig
-@@ -354,6 +354,13 @@ config MACH_CPU9G20
- 	  Select this if you are using a Eukrea Electromatique's
- 	  CPU9G20 Board <http://www.eukrea.com/>
- 
-+config MACH_NETUS_FOXBOARD
-+	bool "Acmesystems NetusG20 board"
-+	depends on ARCH_AT91SAM9G20
-+	help
-+	  Select this if you are using a Acmesystems NetusG20
-+	  board <http://netus.acmesystems.it/>
-+
- endif
- 
- # ----------------------------------------------------------
-@@ -444,6 +451,40 @@
- 	  On AT91SAM926x boards both types of NAND flash can be present
- 	  (8 and 16 bit data bus width).
- 
-+config NETUS_HEARTBEAT_LED
-+	bool "Use heartbeat trigger for led"
-+	depends on MACH_NETUS_FOXBOARD
-+	select LEDS_TRIGGER_HEARTBEAT
-+	help
-+	  Select this option to enable default trigger heartbeart for
-+	  FoxBoardG20 user led.
-+
-+config NETUS_SERIALS
-+	bool "Enable serials"
-+	depends on MACH_NETUS_FOXBOARD
-+	help
-+	  Select this option to enable serials interface /dev/ttyS1,
-+	  /dev/ttyS2 and /dev/ttyS5 (for oLed interface)
-+
-+config NETUS_USE_DATAFLASH
-+	bool "Enable the dataflash"
-+	select MTD_DATAFLASH
-+	select MTD_PARTITIONS
-+	select MTD_CMDLINE_PARTS
-+	select MTD_CHAR
-+	select MTD_BLOCK
-+	depends on MACH_NETUS_FOXBOARD
-+	help
-+	  Select this option to use the dataflash.
-+
-+config NETUS_FOXGM
-+	bool "Enable support for FoxGM board"
-+	depends on MACH_NETUS_FOXBOARD
-+	select LEDS_TRIGGER_HEARTBEAT
-+	help
-+	  Select this option to auto-configure leds and
-+	  serial ports according to FOXGM board.
-+
- # ----------------------------------------------------------
- 
- comment "AT91 Feature Selections"
---- linux-2.6.35.4.orig/arch/arm/mach-at91/Makefile	2010-09-18 13:29:33.000000000 +0200
-+++ linux-2.6.35.4/arch/arm/mach-at91/Makefile	2010-09-18 13:31:31.000000000 +0200
-@@ -65,6 +65,7 @@
- obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
- obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
- obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
-+obj-$(CONFIG_MACH_NETUS_FOXBOARD) += board-netus-foxboard.o
- 
- # AT91SAM9G45 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
-