summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
authorjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>2012-01-31 18:37:09 +0000
committerjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>2012-01-31 18:37:09 +0000
commit65ca4389f1ce0f91f4a58d0b8a47e273172656a0 (patch)
treed71c5c4cc477c2a3dd0e3e16e4b161aeaa83e406 /target/linux/ar71xx
parent4bc970ba4f3defb084750172ceea809890e075ba (diff)
ar71xx: support for D-LINK DIR-615 rev. E4
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ar71xx')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/uci-defaults/leds8
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/uci-defaults/network1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-2.6.391
-rw-r--r--target/linux/ar71xx/config-3.21
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig9
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile1
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c183
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h1
-rw-r--r--target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c179
-rw-r--r--target/linux/ar71xx/generic/profiles/d-link.mk12
-rw-r--r--target/linux/ar71xx/image/Makefile6
-rw-r--r--target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch26
15 files changed, 428 insertions, 7 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index f30ad0522..a3d5075a2 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -57,6 +57,9 @@ get_status_led() {
dir-615-c1)
status_led="dir-615c1:green:status"
;;
+ dir-615-e4)
+ status_led="dir-615-e4:green:power"
+ ;;
dir-825-b1)
status_led="dir825b1:orange:power"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
index d9613930d..c33510af4 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
@@ -118,6 +118,14 @@ rb750)
set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
;;
+dir-615-e4)
+ set_led_netdev "wan" "WAN" "dir-615-e4:green:wan" "eth1"
+ set_led_switch "lan1" "LAN1" "dir-615-e4:green:lan1" "switch0" "0x02"
+ set_led_switch "lan2" "LAN2" "dir-615-e4:green:lan2" "switch0" "0x04"
+ set_led_switch "lan3" "LAN3" "dir-615-e4:green:lan3" "switch0" "0x08"
+ set_led_switch "lan4" "LAN4" "dir-615-e4:green:lan4" "switch0" "0x10"
+ ;;
+
dir-825-b1)
set_led_usbdev "usb" "USB" "dir825b1:blue:usb" "1-1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network
index ca9989818..613b2a0e8 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network
@@ -137,6 +137,7 @@ ap96 |\
airrouter |\
dir-600-a1 |\
dir-615-c1 |\
+dir-615-e4 |\
ja76pf |\
rb-750 |\
tew-632brp |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 9f117225f..82b53f161 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -166,6 +166,9 @@ ar71xx_board_detect() {
*"DIR-600 rev. A1")
name="dir-600-a1"
;;
+ *"DIR-615 rev. E4")
+ name="dir-615-e4"
+ ;;
*"DIR-825 rev. B1")
name="dir-825-b1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 49df3c396..3adfcd58b 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -97,6 +97,7 @@ platform_check_image() {
ap83 | \
dir-600-a1 | \
dir-615-c1 | \
+ dir-615-e4 | \
dir-825-b1 | \
mzk-w04nu | \
mzk-w300nh | \
diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39
index 4f51b1a2b..b8a91b50f 100644
--- a/target/linux/ar71xx/config-2.6.39
+++ b/target/linux/ar71xx/config-2.6.39
@@ -25,6 +25,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DB120=y
CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y
+CONFIG_AR71XX_MACH_DIR_615_E4=y
CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_EAP7660D=y
CONFIG_AR71XX_MACH_HORNET_UB=y
diff --git a/target/linux/ar71xx/config-3.2 b/target/linux/ar71xx/config-3.2
index 50fe18fd9..c3bcc763f 100644
--- a/target/linux/ar71xx/config-3.2
+++ b/target/linux/ar71xx/config-3.2
@@ -34,6 +34,7 @@ CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_615_E4=y
CONFIG_ATH79_MACH_DIR_825_B1=y
CONFIG_ATH79_MACH_EAP7660D=y
CONFIG_ATH79_MACH_HORNET_UB=y
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
index 60db3ef41..14982b195 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
@@ -104,6 +104,15 @@ config AR71XX_MACH_DIR_615_C1
select AR71XX_DEV_LEDS_GPIO
select AR71XX_NVRAM
+config AR71XX_MACH_DIR_615_E4
+ bool "D-Link DIR-615 rev. E4 support"
+ select SOC_AR724X
+ select AR71XX_DEV_AP91_PCI if PCI
+ select AR71XX_DEV_M25P80
+ select AR71XX_DEV_GPIO_BUTTONS
+ select AR71XX_DEV_LEDS_GPIO
+ select AR71XX_NVRAM
+
config AR71XX_MACH_DIR_825_B1
bool "D-Link DIR-825 rev. B1 board support"
select SOC_AR71XX
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
index 22e32e5ac..546ff34cc 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o
obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o
+obj-$(CONFIG_AR71XX_MACH_DIR_615_E4) += mach-dir-615-e4.o
obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o
obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o
obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c
new file mode 100644
index 000000000..943929a59
--- /dev/null
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c
@@ -0,0 +1,183 @@
+/*
+ * D-Link DIR-615 rev. E4 board support
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "nvram.h"
+
+#define DIR_615_E4_GPIO_LED_WPS 0
+#define DIR_615_E4_GPIO_LED_POWER_AMBER 1
+#define DIR_615_E4_GPIO_LED_POWER_GREEN 6
+#define DIR_615_E4_GPIO_LED_WAN_AMBER 7
+#define DIR_615_E4_GPIO_LED_WAN_GREEN 17
+#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13
+#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14
+#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15
+#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16
+
+#define DIR_615_E4_GPIO_BTN_RESET 8
+#define DIR_615_E4_GPIO_BTN_WPS 12
+
+#define DIR_615_E4_KEYS_POLL_INTERVAL 20
+#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL)
+
+#define DIR_615_E4_NVRAM_ADDR 0x1f030000
+#define DIR_615_E4_NVRAM_SIZE 0x10000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir_615_e4_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "nvram",
+ .offset = 0x030000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x040000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2c0000,
+ }, {
+ .name = "mac",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x3a0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir_615_e4_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = dir_615_e4_partitions,
+ .nr_parts = ARRAY_SIZE(dir_615_e4_partitions),
+#endif
+};
+
+
+static struct gpio_led dir_615_e4_leds_gpio[] __initdata = {
+ {
+ .name = "dir-615-e4:green:power",
+ .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "dir-615-e4:amber:power",
+ .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "dir-615-e4:green:wan",
+ .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:amber:wan",
+ .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER,
+ }, {
+ .name = "dir-615-e4:green:lan1",
+ .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan2",
+ .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan3",
+ .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan4",
+ .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:blue:wps",
+ .gpio = DIR_615_E4_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_E4_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_E4_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_615_e4_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac_buff[6];
+ u8 *mac = NULL;
+
+ if (nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE,
+ "lan_mac=", mac_buff) == 0) {
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1);
+ mac = mac_buff;
+ }
+
+ ar71xx_add_device_m25p80(&dir_615_e4_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio),
+ dir_615_e4_leds_gpio);
+
+ ar71xx_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615_e4_gpio_keys),
+ dir_615_e4_gpio_keys);
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+
+ ar71xx_add_device_mdio(0, 0x0);
+
+ /* LAN ports */
+ ar71xx_add_device_eth(1);
+
+ /* WAN port */
+ ar71xx_add_device_eth(0);
+
+ ap91_pci_setup_wmac_led_pin(1);
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h
index 452055d78..82fc944cb 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h
@@ -29,6 +29,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */
AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+ AR71XX_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
AR71XX_MACH_EAP7660D, /* Senao EAP7660D */
AR71XX_MACH_JA76PF, /* jjPlus JA76PF */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c
new file mode 100644
index 000000000..cce5dce79
--- /dev/null
+++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c
@@ -0,0 +1,179 @@
+/*
+ * D-Link DIR-615 rev. E4 board support
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define DIR_615_E4_GPIO_LED_WPS 0
+#define DIR_615_E4_GPIO_LED_POWER_AMBER 1
+#define DIR_615_E4_GPIO_LED_POWER_GREEN 6
+#define DIR_615_E4_GPIO_LED_WAN_AMBER 7
+#define DIR_615_E4_GPIO_LED_WAN_GREEN 17
+#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13
+#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14
+#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15
+#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16
+
+#define DIR_615_E4_GPIO_BTN_RESET 8
+#define DIR_615_E4_GPIO_BTN_WPS 12
+
+#define DIR_615_E4_KEYS_POLL_INTERVAL 20
+#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL)
+
+#define DIR_615_E4_NVRAM_ADDR 0x1f030000
+#define DIR_615_E4_NVRAM_SIZE 0x10000
+
+static struct mtd_partition dir_615_e4_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "nvram",
+ .offset = 0x030000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x040000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2c0000,
+ }, {
+ .name = "mac",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x3a0000,
+ }
+};
+
+static struct flash_platform_data dir_615_e4_flash_data = {
+ .parts = dir_615_e4_partitions,
+ .nr_parts = ARRAY_SIZE(dir_615_e4_partitions),
+};
+
+
+static struct gpio_led dir_615_e4_leds_gpio[] __initdata = {
+ {
+ .name = "dir-615-e4:green:power",
+ .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "dir-615-e4:amber:power",
+ .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "dir-615-e4:green:wan",
+ .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:amber:wan",
+ .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER,
+ }, {
+ .name = "dir-615-e4:green:lan1",
+ .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan2",
+ .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan3",
+ .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan4",
+ .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:blue:wps",
+ .gpio = DIR_615_E4_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_E4_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_E4_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_615_e4_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac_buff[6];
+ u8 *mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE,
+ "lan_mac=", mac_buff) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
+ mac = mac_buff;
+ }
+
+ ath79_register_m25p80(&dir_615_e4_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio),
+ dir_615_e4_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615_e4_gpio_keys),
+ dir_615_e4_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk
index ec79ddecf..3068c4f31 100644
--- a/target/linux/ar71xx/generic/profiles/d-link.mk
+++ b/target/linux/ar71xx/generic/profiles/d-link.mk
@@ -29,6 +29,18 @@ endef
$(eval $(call Profile,DIR615C1))
+define Profile/DIR615E4
+ NAME:=D-Link DIR-615 rev. E4
+ PACKAGES:=
+endef
+
+define Profile/DIR615E4/Description
+ Package set optimized for the D-Link DIR-615 rev. E4.
+endef
+
+$(eval $(call Profile,DIR615E4))
+
+
define Profile/DIR825B1
NAME:=D-Link DIR-825 rev. B1
PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index bd5e945f5..19e26ad2d 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -698,6 +698,11 @@ define Image/Build/Profile/DIR600A1
$(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,$(dir600a1_cmdline),"AP91-AR7240-RT-090223-00")
endef
+dir615e4_cmdline=board=DIR-615-E4 console=ttyS0,115200
+define Image/Build/Profile/DIR615E4
+ $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-615-e4,$(dir615e4_cmdline),"AP99-AR7240-RT-091105-05")
+endef
+
eap7660d_cmdline=board=EAP7660D console=ttyS0,115200
define Image/Build/Profile/EAP7660D
$(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,$(eap7660d_cmdline))
@@ -995,6 +1000,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DB120,$(1))
$(call Image/Build/Profile/DIR600A1,$(1))
$(call Image/Build/Profile/DIR615C1,$(1))
+ $(call Image/Build/Profile/DIR615E4,$(1))
$(call Image/Build/Profile/DIR825B1,$(1))
$(call Image/Build/Profile/EAP7660D,$(1))
$(call Image/Build/Profile/FR54RTR,$(1))
diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
index d5204cb08..e6542a174 100644
--- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,17 +16,80 @@
+@@ -16,17 +16,81 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -18,6 +18,7 @@
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
++ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
@@ -187,7 +188,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
-@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
+@@ -54,6 +137,379 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@@ -296,6 +297,16 @@
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
++config ATH79_MACH_DIR_615_E4
++ bool "D-Link DIR-615 rev. E4 support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_NVRAM
++
+config ATH79_MACH_DIR_825_B1
+ bool "D-Link DIR-825 rev. B1 board support"
+ select SOC_AR71XX
@@ -557,7 +568,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM (rev 1.0) board"
select SOC_AR724X
-@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM
+@@ -67,6 +523,24 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@@ -582,7 +593,7 @@
endmenu
config SOC_AR71XX
-@@ -96,10 +560,6 @@ config SOC_AR934X
+@@ -96,10 +570,6 @@ config SOC_AR934X
select PCI_AR724X if PCI
def_bool n
@@ -593,7 +604,7 @@
config ATH79_DEV_AP9X_PCI
select ATH79_PCI_ATH9K_FIXUP
def_bool n
-@@ -110,7 +570,14 @@ config ATH79_DEV_DSA
+@@ -110,7 +580,14 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -609,7 +620,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -135,4 +602,7 @@ config ATH79_NVRAM
+@@ -135,4 +612,7 @@ config ATH79_NVRAM
config ATH79_PCI_ATH9K_FIXUP
def_bool n
@@ -619,7 +630,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+@@ -36,8 +36,57 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
#
# Machines
#
@@ -635,6 +646,7 @@
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_E4) += mach-dir-615-e4.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o