ar71xx: add support for the D-Link DIR-600 rev. A1 board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19100 3c298f89-4303-0410-b956-a3cf2f4a3e73

12 files changed, 208 insertions, 2 deletions

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 6e4ed5f6f..1fc2c34fe 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -42,6 +42,9 @@ get_status_led() {
 	bullet-m | rocket-m | nano-m)
 		status_led="ubnt:green:link4"
 		;;
+	dir-600-a1)
+		status_led="dir-600-a1:green:power"
+		;;
 	dir-615-c1)
 		status_led="dir-615c1:green:status"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 42f41e753..327107b0d 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -19,6 +19,9 @@ ar71xx_board_name() {
 	*AW-NR580)
 		name="aw-nr580"
 		;;
+	*"DIR-600 rev. A1")
+		name="dir-600-a1"
+		;;
 	*"DIR-825 rev. B1")
 		name="dir-825-b1"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 65ea22312..13a154441 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -68,7 +68,7 @@ platform_check_image() {
 	[ "$ARGC" -gt 1 ] && return 1
 
 	case "$board" in
-	ap81 | ap83 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
+	ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
 		[ "$magic" != "2705" ] && {
 			echo "Invalid image type."
 			return 1
diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30
index c309ea4b0..357913468 100644
--- a/target/linux/ar71xx/config-2.6.30
+++ b/target/linux/ar71xx/config-2.6.30
@@ -16,6 +16,7 @@ CONFIG_AR71XX_DEV_USB=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
 CONFIG_AR71XX_MACH_GENERIC=y
diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31
index 9146217fd..5c9affa74 100644
--- a/target/linux/ar71xx/config-2.6.31
+++ b/target/linux/ar71xx/config-2.6.31
@@ -18,6 +18,7 @@ CONFIG_AR71XX_DEV_USB=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
 CONFIG_AR71XX_MACH_GENERIC=y
diff --git a/target/linux/ar71xx/config-2.6.32 b/target/linux/ar71xx/config-2.6.32
index 35a846856..a4ac682ef 100644
--- a/target/linux/ar71xx/config-2.6.32
+++ b/target/linux/ar71xx/config-2.6.32
@@ -18,6 +18,7 @@ CONFIG_AR71XX_DEV_USB=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
 CONFIG_AR71XX_MACH_GENERIC=y
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
index e5cf2c788..a9ffcc311 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
@@ -19,6 +19,14 @@ config AR71XX_MACH_AP83
 	select AR71XX_DEV_USB
 	default n
 
+config AR71XX_MACH_DIR_600_A1
+	bool "D-Link DIR-600 rev. A1 support"
+	select AR71XX_DEV_AP91_PCI if PCI
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
 config AR71XX_MACH_DIR_615_C1
 	bool "D-Link DIR-615 rev. C1 support"
 	select AR71XX_DEV_M25P80
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
index 3a632f74d..a441dc701 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_AR71XX_NVRAM)		+= nvram.o
 obj-$(CONFIG_AR71XX_MACH_AP81)		+= mach-ap81.o
 obj-$(CONFIG_AR71XX_MACH_AP83)		+= mach-ap83.o
 obj-$(CONFIG_AR71XX_MACH_AW_NR580)	+= mach-aw-nr580.o
+obj-$(CONFIG_AR71XX_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
 obj-$(CONFIG_AR71XX_MACH_DIR_615_C1)	+= mach-dir-615-c1.o
 obj-$(CONFIG_AR71XX_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
 obj-$(CONFIG_AR71XX_MACH_GENERIC)	+= mach-generic.o
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
new file mode 100644
index 000000000..d76e9b649
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
@@ -0,0 +1,150 @@
+/*
+ *  D-Link DIR-600 rev. A1 board support
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define DIR_600_A1_GPIO_LED_WPS			0
+#define DIR_600_A1_GPIO_LED_POWER_AMBER		1
+#define DIR_600_A1_GPIO_LED_POWER_GREEN		6
+
+#define DIR_600_A1_GPIO_BTN_RESET		8
+#define DIR_600_A1_GPIO_BTN_WPS			12
+
+#define DIR_600_A1_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir_600_a1_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x030000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "nvram",
+		.offset		= 0x030000,
+		.size		= 0x010000,
+	}, {
+		.name		= "kernel",
+		.offset		= 0x040000,
+		.size		= 0x0e0000,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x120000,
+		.size		= 0x2c0000,
+	}, {
+		.name		= "mac",
+		.offset		= 0x3e0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "art",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "firmware",
+		.offset		= 0x040000,
+		.size		= 0x3a0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir_600_a1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = dir_600_a1_partitions,
+        .nr_parts       = ARRAY_SIZE(dir_600_a1_partitions),
+#endif
+};
+
+static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
+	{
+		.name		= "dir-600-a1:green:power",
+		.gpio		= DIR_600_A1_GPIO_LED_POWER_GREEN,
+	}, {
+		.name		= "dir-600-a1:amber:power",
+		.gpio		= DIR_600_A1_GPIO_LED_POWER_AMBER,
+	}, {
+		.name		= "dir-600-a1:blue:wps",
+		.gpio		= DIR_600_A1_GPIO_LED_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button dir_600_a1_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 5,
+		.gpio		= DIR_600_A1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 5,
+		.gpio		= DIR_600_A1_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}
+};
+
+static void __init dir_600_a1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(mac);
+	ar71xx_add_device_mdio(0x0);
+
+	/* WAN port */
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.phy_mask = 0x0;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
+	ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
+	ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
+
+	/* LAN ports */
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x0;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+	ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
+	ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
+	ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
+
+	ar71xx_add_device_eth(1);
+	ar71xx_add_device_eth(0);
+
+	ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
+					dir_600_a1_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(dir_600_a1_gpio_buttons),
+					dir_600_a1_gpio_buttons);
+
+	ap91_pci_init(ee, NULL);
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
+	     dir_600_a1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
index 91907f4db..98681c6c9 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
@@ -1,7 +1,7 @@
 /*
  *  Atheros AR71xx machine type definitions
  *
- *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -19,6 +19,7 @@ enum ar71xx_mach_type {
 	AR71XX_MACH_AP81,	/* Atheros AP81 */
 	AR71XX_MACH_AP83,	/* Atheros AP83 */
 	AR71XX_MACH_AW_NR580,	/* AzureWave AW-NR580 */
+	AR71XX_MACH_DIR_600_A1,	/* D-Link DIR-600 rev. A1 */
 	AR71XX_MACH_DIR_615_C1,	/* D-Link DIR-615 rev. C1 */
 	AR71XX_MACH_DIR_825_B1,	/* D-Link DIR-825 rev. B1 */
 	AR71XX_MACH_RB_411,	/* MikroTik RouterBOARD 411/411A/411AH */
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 746f52576..4cc88d477 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -77,6 +77,26 @@ define Image/Build/WRT400N
 	fi; fi
 endef
 
+dir600a1_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,896k(kernel),2816k(rootfs),64k(mac)ro,64k(art)ro,3712k@0x40000(firmware)
+define Image/Build/DIR600A1
+	$(call PatchKernelLzma,$(2),$(3) $(dir600a1_mtdlayout))
+	if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
+		echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+	else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
+		echo "Warning: $(KDIR)/root.$(1) is too big"; \
+	else \
+		mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+			0x80060000 \
+			-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+			-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+		( \
+			dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+			dd if=$(KDIR)/root.$(1) bs=2752k conv=sync; \
+			echo -n "AP91-AR7240-RT-090223-00"; \
+		) > $(call imgname,$(1),$(2))-universal.bin; \
+	fi; fi
+endef
+
 dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,1600k(unknown)ro,6208k@0x50000(firmware)
 define Image/Build/DIR825B1
 	$(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
@@ -328,6 +348,10 @@ define Image/Build/Profile/WP543
 	$(call Image/Build/Template/64k/$(1),MyLoader,wp543)
 endef
 
+define Image/Build/Profile/DIR600A1
+	$(call Image/Build/Template/64k/$(1),DIR600A1,dir-600-a1,board=DIR-600-A1)
+endef
+
 define Image/Build/Profile/DIR615C1
 	$(call Image/Build/Template/squashfs-only/$(1),Cameo,dir-615-c1,board=DIR-615-C1,"AP81-AR9130-RT-070614-02")
 endef
@@ -429,6 +453,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/AP81,$(1))
 	$(call Image/Build/Profile/AP83,$(1))
 	$(call Image/Build/Profile/A02RBW300N,$(1))
+	$(call Image/Build/Profile/DIR600A1,$(1))
 	$(call Image/Build/Profile/DIR615C1,$(1))
 	$(call Image/Build/Profile/DIR825B1,$(1))
 	$(call Image/Build/Profile/MZKW04NU,$(1))
diff --git a/target/linux/ar71xx/profiles/d-link.mk b/target/linux/ar71xx/profiles/d-link.mk
index 3028a4994..d28a74ca9 100644
--- a/target/linux/ar71xx/profiles/d-link.mk
+++ b/target/linux/ar71xx/profiles/d-link.mk
@@ -5,6 +5,18 @@
 # See /LICENSE for more information.
 #
 
+define Profile/DIR600A1
+	NAME:=D-Link DIR-600 rev. A1
+	PACKAGES:=kmod-ath9k hostapd-mini
+endef
+
+define Profile/DIR600A1/Description
+	Package set optimized for the D-Link DIR-600 rev. A1.
+endef
+
+$(eval $(call Profile,DIR600A1))
+
+
 define Profile/DIR615C1
 	NAME:=D-Link DIR-615 rev. C1
 	PACKAGES:=kmod-ath9k hostapd-mini