ar71xx: rewrite WNDR3700/3800 handling

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 2 insertions, 142 deletions

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network
deleted file mode 100644
index 69d7dc712..000000000
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network
+++ /dev/null
@@ -1,69 +0,0 @@
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	eth0.1
-	option type	bridge
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
-
-config interface wan
-	option ifname	eth1
-	option proto	dhcp
-
-config switch
-	option name	rtl8366s
-	option reset	1
-	option enable_vlan 1
-	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
-	option blinkrate	2
-
-config switch_vlan
-	option device	rtl8366s
-	option vlan 	1
-	option ports	"0 1 2 3 5t"
-
-config switch_port
-	# Port 1 controls the GREEN configuration of LEDs for
-	# the switch and the section does not correspond to a real
-	# switch port.
-	#
-	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
-	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
-	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
-	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
-	# 14: Link (master); 15: separate register
-
-	option device		rtl8366s
-	option port		1
-	option led		6
-
-config switch_port
-	# Port 2 controls the ORANGE configuration of LEDs for
-	# the switch and the section does not correspond to a real
-	# switch port.
-	#
-	# See the key above for switch port 1 for the meaning of the
-	# 'led' setting below.
-	
-	option device		rtl8366s
-	option port		2
-	option led		9
-
-config switch_port
-	# Port 5 controls the configuration of the WAN LED and the
-	# section does not correspond to a real switch port.
-	#
-	# To toggle the use of green or orange LEDs for the WAN port,
-	# see the LED setting for wndr3700:green:wan in /etc/config/system.
-	#
-	# See the key above for switch port 1 for the meaning of the
-	# 'led' setting below.
-
-	option device		rtl8366s
-	option port		5
-	option led		2
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network
deleted file mode 100644
index 69d7dc712..000000000
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network
+++ /dev/null
@@ -1,69 +0,0 @@
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	eth0.1
-	option type	bridge
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
-
-config interface wan
-	option ifname	eth1
-	option proto	dhcp
-
-config switch
-	option name	rtl8366s
-	option reset	1
-	option enable_vlan 1
-	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
-	option blinkrate	2
-
-config switch_vlan
-	option device	rtl8366s
-	option vlan 	1
-	option ports	"0 1 2 3 5t"
-
-config switch_port
-	# Port 1 controls the GREEN configuration of LEDs for
-	# the switch and the section does not correspond to a real
-	# switch port.
-	#
-	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
-	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
-	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
-	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
-	# 14: Link (master); 15: separate register
-
-	option device		rtl8366s
-	option port		1
-	option led		6
-
-config switch_port
-	# Port 2 controls the ORANGE configuration of LEDs for
-	# the switch and the section does not correspond to a real
-	# switch port.
-	#
-	# See the key above for switch port 1 for the meaning of the
-	# 'led' setting below.
-	
-	option device		rtl8366s
-	option port		2
-	option led		9
-
-config switch_port
-	# Port 5 controls the configuration of the WAN LED and the
-	# section does not correspond to a real switch port.
-	#
-	# To toggle the use of green or orange LEDs for the WAN port,
-	# see the LED setting for wndr3700:green:wan in /etc/config/system.
-	#
-	# See the key above for switch port 1 for the meaning of the
-	# 'led' setting below.
-
-	option device		rtl8366s
-	option port		5
-	option led		2
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index cb3b85177..3af66b7e3 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -111,7 +111,7 @@ get_status_led() {
 	wzr-hp-g300nh)
 		status_led="buffalo:green:router"
 		;;
-	wndr3700 | wndr3700v2 | wndr3800)
+	wndr3700)
 		status_led="wndr3700:green:power"
 		;;
 	wnr2000)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
index 0a724221c..a0779effd 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
@@ -123,9 +123,7 @@ wrt160nl)
 	set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt"
 	;;
 
-wndr3700 | \
-wndr3700v2 | \
-wndr3800)
+wndr3700)
 	set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
 	set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
 	;;