diff options
author | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2007-09-06 16:27:37 +0000 |
---|---|---|
committer | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2007-09-06 16:27:37 +0000 |
commit | 17c7b6c3fdc48301e50d22cc6138ede16bd1be24 (patch) | |
tree | a5d41b991a151e72663527a96fbc6c494565d65c /target/linux/ar7-2.6/patches-2.6.22 | |
parent | 5389989abaa52926b22f9f030d1481df1e73d745 (diff) |
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ar7-2.6/patches-2.6.22')
8 files changed, 0 insertions, 383 deletions
diff --git a/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch b/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch deleted file mode 100644 index 5989580ee..000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch +++ /dev/null @@ -1,75 +0,0 @@ -diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig ---- linux-2.6.22/arch/mips/Kconfig 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/Kconfig 2007-07-11 02:34:51.000000000 +0200 -@@ -15,6 +15,20 @@ - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_KGDB -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select GENERIC_GPIO -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -diff -urN linux-2.6.22/arch/mips/kernel/traps.c linux-2.6.22.new/arch/mips/kernel/traps.c ---- linux-2.6.22/arch/mips/kernel/traps.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/kernel/traps.c 2007-07-11 02:32:39.000000000 +0200 -@@ -1051,11 +1051,6 @@ - unsigned long exception_handlers[32]; - unsigned long vi_handlers[64]; - --/* -- * As a side effect of the way this is implemented we're limited -- * to interrupt handlers in the address range from -- * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ... -- */ - void *set_except_vector(int n, void *addr) - { - unsigned long handler = (unsigned long) addr; -@@ -1063,9 +1058,15 @@ - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -- *(volatile u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- flush_icache_range(ebase + 0x200, ebase + 0x204); -+ /* lui k0, 0x0000 */ -+ *(volatile u32 *)(CAC_BASE+0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(volatile u32 *)(CAC_BASE+0x204) = 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(volatile u32 *)(CAC_BASE+0x208) = 0x03400008; -+ /* nop */ -+ *(volatile u32 *)(CAC_BASE+0x20C) = 0x00000000; -+ flush_icache_range(CAC_BASE+0x200, CAC_BASE+0x210); - } - return (void *)old_handler; - } -diff -urN linux-2.6.22/arch/mips/Makefile linux-2.6.22.new/arch/mips/Makefile ---- linux-2.6.22/arch/mips/Makefile 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/Makefile 2007-07-11 02:32:39.000000000 +0200 -@@ -158,6 +158,13 @@ - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ diff --git a/target/linux/ar7-2.6/patches-2.6.22/110-flash.patch b/target/linux/ar7-2.6/patches-2.6.22/110-flash.patch deleted file mode 100644 index b10406754..000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/110-flash.patch +++ /dev/null @@ -1,39 +0,0 @@ -diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig ---- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700 -@@ -152,6 +152,12 @@ - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_AR7_PARTS -+ tristate "TI AR7 partitioning support" -+ depends on MTD_PARTITIONS -+ ---help--- -+ TI AR7 partitioning support -+ - comment "User Modules And Translation Layers" - depends on MTD - -diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile ---- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700 -@@ -12,6 +12,7 @@ - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o -diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c ---- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700 -@@ -74,7 +74,7 @@ - - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7-2.6/patches-2.6.22/120-gpio_chrdev.patch b/target/linux/ar7-2.6/patches-2.6.22/120-gpio_chrdev.patch deleted file mode 100644 index 41a8b8e02..000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/120-gpio_chrdev.patch +++ /dev/null @@ -1,30 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig ---- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100 -@@ -920,6 +920,15 @@ - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 -diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile ---- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100 -@@ -83,6 +83,7 @@ - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7-2.6/patches-2.6.22/130-leds.patch b/target/linux/ar7-2.6/patches-2.6.22/130-leds.patch deleted file mode 100644 index 261b71219..000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/130-leds.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig ---- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100 -@@ -19,6 +19,12 @@ - - comment "LED drivers" - -+config LEDS_AR7 -+ tristate "LED Support for the TI AR7" -+ depends LEDS_CLASS && AR7 -+ help -+ This option enables support for the LEDs on TI AR7. -+ - config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends LEDS_CLASS && PXA_SHARP_C7xx -diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile ---- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100 -@@ -5,6 +5,7 @@ - obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o - - # LED Platform Drivers -+obj-$(CONFIG_LEDS_AR7) += leds-ar7.o - obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/ar7-2.6/patches-2.6.22/140-watchdog.patch b/target/linux/ar7-2.6/patches-2.6.22/140-watchdog.patch deleted file mode 100644 index 163df40ba..000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/140-watchdog.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig ---- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100 -@@ -544,6 +544,12 @@ - - # MIPS Architecture - -+config AR7_WDT -+ tristate "TI AR7 Watchdog Timer" -+ depends on WATCHDOG && AR7 -+ help -+ Hardware driver for the TI AR7 Watchdog Timer. -+ - config INDYDOG - tristate "Indy/I2 Hardware Watchdog" - depends on WATCHDOG && SGI_IP22 -diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile ---- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100 -@@ -71,6 +71,7 @@ - obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o - - # MIPS Architecture -+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_INDYDOG) += indydog.o - - # S390 Architecture diff --git a/target/linux/ar7-2.6/patches-2.6.22/200-ethernet_driver.patch b/target/linux/ar7-2.6/patches-2.6.22/200-ethernet_driver.patch deleted file mode 100644 index ca603ad61..000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/200-ethernet_driver.patch +++ /dev/null @@ -1,30 +0,0 @@ -diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig ---- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700 -@@ -1777,6 +1777,15 @@ - workstations. - See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>. - -+config CPMAC -+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" -+ depends on NET_ETHERNET && EXPERIMENTAL && AR7 -+ select PHYLIB -+ select FIXED_PHY -+ select FIXED_MII_100_FDX -+ help -+ TI AR7 CPMAC Ethernet support -+ - config NET_POCKET - bool "Pocket and portable adapters" - depends on NET_ETHERNET && PARPORT -diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile ---- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700 -@@ -148,6 +148,7 @@ - obj-$(CONFIG_8139TOO) += 8139too.o - obj-$(CONFIG_ZNET) += znet.o - obj-$(CONFIG_LAN_SAA9730) += saa9730.o -+obj-$(CONFIG_CPMAC) += cpmac.o - obj-$(CONFIG_DEPCA) += depca.o - obj-$(CONFIG_EWRK3) += ewrk3.o - obj-$(CONFIG_ATP) += atp.o diff --git a/target/linux/ar7-2.6/patches-2.6.22/210-phy_fixed.patch b/target/linux/ar7-2.6/patches-2.6.22/210-phy_fixed.patch deleted file mode 100644 index c8eceebb5..000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/210-phy_fixed.patch +++ /dev/null @@ -1,93 +0,0 @@ -Index: linux-2.6.21.4/drivers/net/phy/fixed.c -=================================================================== ---- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200 -+++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200 -@@ -187,6 +187,19 @@ - .driver = { .owner = THIS_MODULE,}, - }; - -+static void fixed_mdio_release (struct device * dev) -+{ -+ struct phy_device *phydev = container_of(dev, struct phy_device, dev); -+ struct mii_bus *bus = phydev->bus; -+ struct fixed_info *fixed = bus->priv; -+ -+ kfree(phydev); -+ kfree(bus->dev); -+ kfree(bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+} -+ - /*----------------------------------------------------------------------------- - * This func is used to create all the necessary stuff, bind - * the fixed phy driver and register all it on the mdio_bus_type. -@@ -221,6 +234,12 @@ - } - - fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); -+ if (NULL == fixed->regs) { -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed); -+ return -ENOMEM; -+ } - fixed->regs_num = MII_REGS_NUM; - fixed->phy_status.speed = speed; - fixed->phy_status.duplex = duplex; -@@ -249,8 +268,11 @@ - fixed->phydev = phydev; - - if(NULL == phydev) { -- err = -ENOMEM; -- goto device_create_fail; -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return -ENOMEM; - } - - phydev->irq = PHY_IGNORE_INTERRUPT; -@@ -262,8 +283,33 @@ - else - snprintf(phydev->dev.bus_id, BUS_ID_SIZE, - "fixed@%d:%d", speed, duplex); -+ - phydev->bus = new_bus; - -+#if 1 -+ phydev->dev.driver = &fixed_mdio_driver.driver; -+ phydev->dev.release = fixed_mdio_release; -+ -+ err = phydev->dev.driver->probe(&phydev->dev); -+ if(err < 0) { -+ printk(KERN_ERR "Phy %s: problems with fixed driver\n", -+ phydev->dev.bus_id); -+ kfree(phydev); -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return err; -+ } -+ -+ err = device_register(&phydev->dev); -+ if(err) { -+ printk(KERN_ERR "Phy %s failed to register\n", -+ phydev->dev.bus_id); -+ } -+ -+ return 0; -+#else - err = device_register(&phydev->dev); - if(err) { - printk(KERN_ERR "Phy %s failed to register\n", -@@ -306,6 +354,7 @@ - kfree(fixed); - - return err; -+#endif - } - - diff --git a/target/linux/ar7-2.6/patches-2.6.22/500-serial_kludge.patch b/target/linux/ar7-2.6/patches-2.6.22/500-serial_kludge.patch deleted file mode 100644 index da38903a3..000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/500-serial_kludge.patch +++ /dev/null @@ -1,62 +0,0 @@ -diff -urN linux-2.6.22.orig/drivers/serial/8250.c linux-2.6.22/drivers/serial/8250.c ---- linux-2.6.22.orig/drivers/serial/8250.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/serial/8250.c 2007-07-11 03:08:57.000000000 +0200 -@@ -258,6 +258,13 @@ - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #if defined (CONFIG_SERIAL_8250_AU1X00) -@@ -2436,7 +2443,7 @@ - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -- wait_for_xmitr(up, UART_LSR_THRE); -+ wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_TX, ch); - } - -diff -urN linux-2.6.22.orig/include/linux/serial_core.h linux-2.6.22/include/linux/serial_core.h ---- linux-2.6.22.orig/include/linux/serial_core.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/linux/serial_core.h 2007-07-11 03:09:49.000000000 +0200 -@@ -40,6 +40,7 @@ - #define PORT_NS16550A 14 - #define PORT_XSCALE 15 - #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ -+#define PORT_AR7 16 - #define PORT_MAX_8250 16 /* max port ID */ - - /* -diff -urN linux-2.6.22.orig/include/linux/serialP.h linux-2.6.22/include/linux/serialP.h ---- linux-2.6.22.orig/include/linux/serialP.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/linux/serialP.h 2007-07-11 03:08:57.000000000 +0200 -@@ -135,6 +135,9 @@ - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ - #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) -+#elif defined(CONFIG_AR7) -+/* This is how it is set up by bootloader... */ -+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 | UART_MCR_RTS | UART_MCR_DTR) - #else - #define ALPHA_KLUDGE_MCR 0 - #endif -diff -urN linux-2.6.22.orig/scripts/setlocalversion linux-2.6.22/scripts/setlocalversion ---- linux-2.6.22.orig/scripts/setlocalversion 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/scripts/setlocalversion 2007-07-11 03:08:57.000000000 +0200 -@@ -1,6 +1,8 @@ - #!/bin/sh - # Print additional version information for non-release trees. - -+exit 0 -+ - usage() { - echo "Usage: $0 [srctree]" >&2 - exit 1 |